File Export use last usage settings of File Export Wizard

how convert a color photo to grayscale? cs6 fireworks / adobe cloud,... File > Export use last usage settings of File > Export Wizard???

There are a lot of different ways to create greyscale images. Here are three methods:
Select the bitmap and choose Commands > Creative > Convert to Grayscale.
This is a quick but destructive method, meaning that it modifies your original image. To preserve your original image, you could first make a copy using the Edit > Clone command.
Select the bitmap and apply a Hue/Saturation effect.
This effect can be found in the Properties panel within the Filters menu, under Adjust Color. Set Saturation to -100.
Select the bitmap and apply the Convert to Alpha effect.
This effect can be found in the Properties panel within the Filters menu, under Other. Set the document canvas to White.
At least one of these should work for you.
Unfortunately, I can't quite understand the portion of your question regarding File > Export and the Export Wizard. If English is not your native language, you might try using Google Translate to compose your question.

Similar Messages

Exporting from PPro CC - Exporting using Match Sequence Settings issue with 24 bit audio

I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.

Always skip Match Sequence Settings and set up the export manually.

Naming PDF at export using a portion of IDCS4 File name(JS)

I have a script that will use a PDF Export Preset to export each page of a document individually. The script uses the ID document's name and adds an "_Final".
For example:
ID docs name:
138-140 TEST 10_WORKER.indd
Final PDF's name:
138-139 TEST 10_WORKER_Final_1.pdf
138-140 TEST 10_WORKER_Final_2.pdf
138-140 TEST 10_WORKER_Final_3.pdf
The first three numbers represent the first page number in the document. I would like it to use these numbers and progressively add one to the following PDF page numbers. I am looking for it to do this while using our standard naming convention which looks like this. . .
MYTEST_138.pdf
MYTEST_139.pdf
MYTEST_140.pdf
Any guidance would be greatly appreciated. Thanks!

The substr(start,length) stuff is in the OMV (under Javascript's Core Classes, class String -- and if you are interested in further developing your JS skills you might want to check my version of this clumsy system!).
Shonky cuts off the first three characters and instructs Javascript to forcibly convert them to a number -- the parseInt command (and that's in the OMV Core Classes under "Global"). parseInt returns the numerical value of the string if it contains digits, or the special value NaN ("Not-a-Number") if it's not. Hence the 'typeof' check -- which, incidentally, I didn't know, but I can guess at what it does. I bet it returns 'true' if the variable contains a number, 'false' if not; and NaN is per definition not a number. (That's computer logic, that is!)
The check is necessary because you want to add something to it as a number; and JS also allows 'adding to a string'. Suppose the first three characters are "hey", adding 1 to it would return the syntactically correct result "hey+1", but it's not what you want here (more computer logic!).
The GREP you point to is quite a bit smarter than assuming the first three, and only three, characters are in fact digits. Some testing shows that this
n = decodeURI(app.activeDocument.name).replace(/^(\d+).*/, '$1');
alert (n);
returns one single string consisting of all digits at the front of your file name. I had to try this out one character at a time ... but, eventually, it boiled down to this:
^(\d+).*
^ start of text
(..) group number 1
\d any digit
+ one or more of the preceding code
. any character
* zero or more of the preceding code
$1 recall found group number one
.. thus (you'll have to take my word for it) it puts all digits at the start of the file name into group one, gathers the rest, and replaces all of it with the contents of group #1 (which still contains the first digits, remember?). So the entire file name is replaced with just the digits in front.
If you are thinking "Hey, I can use this", you are not done here. This GREP operation returns a string type, and to convert it to a number you have to tell JS to do so:
n = Number(n);
.. and now you can add 1 to it the usual way. It's also possible your file accidentally does not start with one or more digits, and in that case the variable 'n' will be empty, so you have to test for n = '' before converting to a number.
The GREP is smarter, because it can find any number of digits, which would be a much more difficult task with plain string manipulations, and it automatically rejects (i.e., stops at) the first non-digit.

Can a .rar file be used to zip a Mac file?

I've got a bunch of .rar files that are supposed to make up one big Mac file, but I've never heard of that being possible..always thought that's only a PC zip format....anyone know otherwise? If so, how do you unzip 'em? thanks

There is one caveat: certain types of ‘legacy’ files, from Mac OS 9 and earlier—those with resource forks—can’t be safely stored in non-Mac-aware archives. Font suitcases, for example, are completely lost (become empty files); 68k-compatible applications are ruined; non-native image formats lose their previews. The only exception of which I am aware is a Zip archive created by OS X’s tool and equivalents, which use a special workaround to save resources and Finder Info in such a way that they can reconstitute the original file structure on extraction. Windows users +et al.+ just see an extra directory in these archives. AFAIK this isn’t available for rar, tar, gzip and other such compression formats—and if implemented by a particular Mac-aware utility, would require that a similar program be used for unpacking the archives.

File download using servlet and jsp. File Dialog comes twice

Hi
I was trying to download a file using servlet. There is a link which calls the servlet. When I click on the link file dialog box comes up. On selecting Open it again shows me the file dialog box. I changed the method from POST to GET and it worked properly.
My question is why does it work with GET and not with POST. I am aware of the differences between POST and GET but am not able to come to a rational explanation for this behaviour.
Please if anyone can explain this to me I am going crazy thinking an answer for this.
Thank you.
Regards
Jay

Hi Jay,
I also have the same question. Why does it work with GET and not for POST?. If you were able to find the answer please let me know.
Thank you.
Regards,
Aravind

Converting files created using JVC GYHM 100U to file for iMovie/FC Express

I have a JVC GYHM 100U which creates files only for Final Cut Pro. Is there a way to convert the files to be used in FC Express or iMovie?

FCE does not support natively the HDV format, the one of my Canon HV30 for instance?
Correct. FCE converts HDV to AIC on ingestion. It does not works with HDV natively. FCP does.
That means that on import, FCE do some kind of conversions to the AIC format, right?
Right.
My impression was that the JVC camcorder we're talking about was able to write into the AIC codec
Don't know where you got that impression, but it is incorrect.
...and that that codex was the default FCP codec. Then what is the FCP (or FCS now) default codex or at least the codec that this camera support as the default FCS format.
There is no "default codec" in FCP. FCP works with many formats/codecs natively.
-DH

Table export using datapump - estimate the time to export

I aim to export the table ABC of size 300GB using datapump ( oracle 10g)
I would like to know how long to take the table for export ( estimate time)

There are so many unknown variables like the number of CPUs, speed of disks, other loads on your database that makes it very inaccurate to guess.
Based on your old version 10g and the assumption that your server is same age and average power, you should be looking at 30-50GB an hour, i.e. 6 to 10 hours. I could be wrong though.

Problem exporting FXG file for use in Flash

I have a simple rectangle with a 3D-bevel effect built in Illustrator that I need to export as an FXG file for use in Flash.
When I export from Illustrator to an FXG format, it creates bitmaps and embeds those in the FXG file.
if i import directly into Flash CS5 there are transparent gaps (and the symbols created are very complex), and it warns me that the objects aren't compatible with flash and they should be converted to bitmaps first.
Is there a way to export the object to an FXG file and keep it in a vector format?
if not, and this may be an Illustrator question, is there a way to create the same kind of effect so that I can get an end FXG object that will work in Flash?
An example of what I am seeing is posted here: http://idg-partners.com/flash_issue.html
Thanks in advance.

Is there a way to export the object to an FXG file and keep it in a vector format?
Create the bevel edges as separate objects with gradient fills. not sure why you need AI, though. You can do that jsut the same directly in Flash...
Mylenium

Does we need to Create a file Before using Open dataSet

Hi Guys,
            Can any body tell me whether we have to create a File before using Open dataset for writing files in Application Server.
           Can anybody write a program for EKPO table to store it in application Server using OpendatasSet ?Is there any specific care we have to take for Executing   pgm in Background?
I wrote the pgm for Foreground using GUI- Download.
PGM.
      select * into table it_ekpo from ekpo .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename ='c:\EKPO.xls'
filetype = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
data_tab = it_ekpo
*fieldnames = l_heading
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3 .
                   Plzzzzzzzzz Make the changes for existing Pgm.any help is awarded with points.Its Urgent.
Thanks,
Gopi.

Hi Guys,
             Thanks for ur immediate response.I am sending the code just confirm me whether is correct r not?
DATA : wa_EKPO_file   TYPE file_table-filename.
select * into table it_ekpo from ekpo .
OPEN DATASET wa_EKPO_file FOR OUTPUT         "Write to appl. server
                                      IN TEXT MODE
                                      ENCODING DEFAULT. "Open dataset Return code
IF sy-subrc = 0.
LOOP at IT_EKPO into WA_EKPO.
TRANSFER wa_ekpo to wa_ekpo_file.
ENDLOOP.
ENDIF.
                                         I want write the data into SPREAD Sheet .Can u guys tell me how to write into Spread Sheet using Open data Set.
Thanks,
Gopi.

Opening a pdf file stream using java

I am developing a web app using jsp that needs to dynamically create xml files, then using fop I convert those files into pdf's.
I would need to be able to open multiple pdf files in a row...
Here's what I have so far....this will only open the 1st file...
I don't need to open the pdf files in a web browser, it can be done in acrobat reader if needs be...
do
if ( ( ( startRec * cache) + 1 ) <= ( min( ( startRec + 1 ) * cache, recCount ) ) )
System.out.println( ( startRec * cache ) + 1 + "-" + min( ( startRec + 1 ) * cache, recCount ) );
String xmlString = xmlStart;
for ( int n=( startRec * cache ); n<min( ( startRec + 1 ) * cache, recCount ); n++ )
ViewFileDetailsBean viewBean = (ViewFileDetailsBean)listOfViewFileDetailsBean.get(n);
xmlString = xmlString + viewBean.getxMLString();
xmlString = xmlString + "/t</data>\n"; // THIS FINISHES THE XML
pdfBean.makePDF( xmlString );
response.setContentLength( pdfBean.getOutput().length );
response.setContentType( "application/pdf" );
response.getOutputStream().write( pdfBean.getOutput() );
response.getOutputStream().flush();
startRec++;
}while ( startRec <= ( recCount / cache ) );
Thanks,
GoldenEye4ever

I forgot to say,
We will not have write access to the server, also, the higher-ups would like to view pdf files.. rather than extracting a zip file containing pdf files...lol
Basically, the xml file that I was initally creating was getting far too large for java to handle, 190,000 records +,
so i am breaking them down to perhaps 10,000 record long xml files, to be converted to pdf
Thanks for your fast reply
GoldenEye4ever

Using operating system command on file receiver comm.channel

Hi,
I pepared a XI 3.0 message generating .txt file.
I must append content of this file to the and of the file with same name but different extension(.bak extension).
I know it is achieved with copy name.bak+name.txt it appends txt file to the .bak file.
My problem is: How can i supply name of .txt file to use as name of .bak file?
How can i do that?
Thanks.

/usr/sap/SID......./../../../Server0
Put the java program there.
Regards
Ravi Raman

Copy one text file to another text file and delete last line

Hi all wonder if someone can help, i want to be able to copy one text file to another text file and remove the last line of the first text file. So currently i have this method:
Writer output = null;
         File file = new File("playerData.xml");
         try {
               output = new BufferedWriter(new FileWriter(file, true));
               output.write("\t" + "<player>" + "\n");
               output.write("\t" + "\t" + "<playerName>" + playerName + "</playerName>" + "\n");
               output.write("\t" + "\t" + "<playerScore>" + pointCount + "</playerScore>" + "\n");
               output.write("\t" + "\t" + "<playerTime>" + minutes + " minutes " + seconds + " seconds" + "</playerTime>" + "\n");
               output.write("\t" + "</player>" + "\n");
               output.write("</indianaTuxPlayer>" + "\n");
              output.close();
              System.out.println("Player data saved!");
         catch (IOException e) {
               e.printStackTrace();
          }However each time the method is run i get the "</indianaTuxPlayer>" line repeated, now when i come to read this in as a java file i get errors becuase its not well formed. So my idea is to copy the original file, remove the last line of that file, so the </indianaTuxPlayer> line and then add this to a new file with the next data saved in it. So i would end up with something like this:
<?xml version="1.0" encoding="UTF-8"?>
<indianaTuxPlayers>
     <player>
          <playerName>Default Player</playerName>
          <playerScore>0</playerScore>
          <playerTime>null minutes null seconds</playerTime>
     </player>
     <player>
          <playerName>Default Player</playerName>
          <playerScore>0</playerScore>
          <playerTime>null minutes null seconds</playerTime>
     </player>
     <player>
          <playerName>Default Player</playerName>
          <playerScore>0</playerScore>
          <playerTime>null minutes null seconds</playerTime>
     </player>
</indianaTuxPlayers>
However after all day searching the internet and trying ways, i have been unable to get anything working, could anyone give me a hand please?

I would go the XML route too, but for fun, open a file as a BufferedWriter and do this:
void copyAllButLastLine(File src, BufferedWriter tgt) throws IOException {
    BufferedReader in = new BufferedReader(new FileReader(src));
    try {
        String previous= in.readLine();
        for (String current = null; (current = in.readLine()) != null; previous=current) {
            tgt.write(previous);
            tgt.newLine();
    } finally {
        in.close();
}

Using RSL and Deploying SWZ files

Hi
I developed a Flex Application on my local machine and used
signed Adobe Framework RSL. It works perfect on my machine and
creates the Flash Player Cache on my machine.
Now when I deploy the same application on my server with the
swf files and the swz files the application is not able to create
cache on the client machine. (its not able to use the framework.swz
file and uses the failover framework.swf files)
I did a lot of reading which says that I should create a
cross domain policy file etc.
http://livedocs.adobe.com/flex/3/html/help.html?content=rsl_09.html
Can somebody please help me and tell me how can I deploy my
application on my server?
and what exactly should I put in my config files and in my
crossdomain.xml file?
Thank you

Hi Sudheer,
You are going right. And as Nash said the Portal server didnt get restarted when you deploy your par file. I generally follow different steps to deploy and run par file. Have a look, may be this could help you. When I deploy and run par files it doesnt take more than half a minute.
Steps:
1) Save project. Right click and "Quick par Upload".
2) On your browser type
"http://<b><your_server_name>:</b>50000/irj/servlet/prt/portal/" or same page you can get by navigating:
System Administration-> Support-> Portal Runtime-> Administration Console.
3) At the option "Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD." Deploy your par file by giving the path.
4) On your portal. Follow the path: Content Administrator-> Portal Content -> Portal Content(sub-option). Right click -> New from par ->iView.
5) Here in the list you will find the par file which you have uploaded. Proceed as said.
6) You will finally have an iView. Right click it and preview it.
Next time you make changes to the application just create a par and deploy it in the same way and Preview directly, no need to follow step 4,5. For previewing follow the step 6 again.
Hope this helps you. If still the problem exist then let me know.
Regards
Pravesh
PS: Please dont forget to reward points for helpful answer.

How to run java file by using another applet file ??

how to compile and run java file by using another applet or japplet file .

how to understand what you are talking about.

Schema Export using DBMS_DATAPUMP is extremely slow

Hi,
I created a procedure that duplicates a schema within a given database by first exporting the schema to a dump file using DBMS_DATAPUMP and then imports the same file (can't use network link because it fails most of the time).
My problem is that a regular schema datapump export takes about 1.5 minutes whereas the export using dbms_datapump takes about 10 times longer - something in the range of 14 minutes.
here is the code of the procedure that duplicates the schema:
CREATE OR REPLACE PROCEDURE MOR_DBA.copy_schema3 (
                                          source_schema in varchar2,
                                          destination_schema in varchar2,
                                          include_data in number default 0,
                                          new_password in varchar2 default null,
                                          new_tablespace in varchar2 default null
                                        ) as
h   number;
js varchar2(9); -- COMPLETED or STOPPED
q   varchar2(1) := chr(39);
v_old_tablespace varchar2(30);
v_table_name varchar2(30);
BEGIN
   /* open a new schema level export job */
   h := dbms_datapump.open ('EXPORT', 'SCHEMA');
   /* attach a file to the operation */
   DBMS_DATAPUMP.ADD_FILE (h, 'COPY_SCHEMA_EXP' ||copy_schema_unique_counter.NEXTVAL || '.DMP', 'LOCAL_DATAPUMP_DIR');
   /* restrict to the schema we want to copy */
   dbms_datapump.metadata_filter (h, 'SCHEMA_LIST',q||source_schema||q);
   /* apply the data filter if we don't want to copy the data */
   IF include_data = 0 THEN
      dbms_datapump.data_filter(h,'INCLUDE_ROWS',0);
   END IF;
   /* start the job */
   dbms_datapump.start_job(h);
   /* wait for the job to finish */
   dbms_datapump.wait_for_job(h, js);
   /* detach the job handle and free the resources */
   dbms_datapump.detach(h);
   /* open a new schema level import job */
   h := dbms_datapump.open ('IMPORT', 'SCHEMA');
   /* attach a file to the operation */
   DBMS_DATAPUMP.ADD_FILE (h, 'COPY_SCHEMA_EXP' ||copy_schema_unique_counter.CURRVAL || '.DMP', 'LOCAL_DATAPUMP_DIR');
   /* restrict to the schema we want to copy */
   dbms_datapump.metadata_filter (h, 'SCHEMA_LIST',q||source_schema||q);
   /* remap the importing schema name to the schema we want to create */
   dbms_datapump.metadata_remap(h,'REMAP_SCHEMA',source_schema,destination_schema);
   /* remap the tablespace if needed */
   IF new_tablespace IS NOT NULL THEN
      select default_tablespace
      into v_old_tablespace
      from dba_users
      where username=source_schema;
      dbms_datapump.metadata_remap(h,'REMAP_TABLESPACE', v_old_tablespace, new_tablespace);
   END IF;
   /* apply the data filter if we don't want to copy the data */
   IF include_data = 0 THEN
      dbms_datapump.data_filter(h,'INCLUDE_ROWS',0);
   END IF;
   /* start the job */
   dbms_datapump.start_job(h);
   /* wait for the job to finish */
   dbms_datapump.wait_for_job(h, js);
   /* detach the job handle and free the resources */
   dbms_datapump.detach(h);
   /* change the password as the new user has the same password hash as the old user,
   which means the new user can't login! */
   execute immediate 'alter user '||destination_schema||' identified by '||NVL(new_password, destination_schema);
   /* finally, remove the dump file */
   utl_file.fremove('LOCAL_DATAPUMP_DIR','COPY_SCHEMA_EXP' ||copy_schema_unique_counter.CURRVAL|| '.DMP');
/*EXCEPTION
   WHEN OTHERS THEN    --CLEAN UP IF SOMETHING GOES WRONG
      SELECT t.table_name
      INTO v_table_name
      FROM user_tables t, user_datapump_jobs j
      WHERE t.table_name=j.job_name
      AND j.state='NOT RUNNING';
      execute immediate 'DROP TABLE ' || v_table_name || ' PURGE';
      RAISE;*/
end copy_schema3;
/The import part of the procedure takes about 2 minutes which is the same time a regular dp import takes on the same schema.
If I disable the import completely it (the export) still takes about 14 minutes.
Does anyone know why the export using dbms_datapump takes so long for exporting?
thanks.

Hi,
I did a tkprof on the DM trace file and this is what I found:
Trace file: D:\Oracle\diag\rdbms\instanceid\instanceid\trace\instanceid_dm00_8004.trc
Sort options: prsela execpu fchela
count    = number of times OCI procedure was executed
cpu      = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk     = number of physical reads of buffers from disk
query    = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows     = number of rows processed by the fetch or execute call
SQL ID: bjf05cwcj5s6p
Plan Hash: 0
BEGIN :1 := sys.kupc$que_int.receive(:2); END;
call     count       cpu    elapsed       disk      query    current        rows
Parse        3      0.00       0.00          0          0          0           0
Execute    229      1.26     939.00         10       2445          0          66
Fetch        0      0.00       0.00          0          0          0           0
total      232      1.26     939.00         10       2445          0          66
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: SYS   (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
wait for unread message on broadcast channel
                                                949        1.01        936.39
********************************************************************************what does "wait for unread message on broadcast channel" mean and why did it take 939 seconds (more than 15 minutes) ?

File Export use last usage settings of File Export Wizard

Similar Messages

Maybe you are looking for