File folder w/ question mark

Hello all-
Im new to the board and fairly new to macs. I was just wondering if anyone could help me figure out why when im trying to install leopard 10.5 my computer freezes. Now when I turn it on it has the flashing file folder with a ?. I put in my leopard disk and restarted holding down the opions key and a lock pops up and wants you to type a password, so I type my password in and then it has a picture of a cd and a little arrow under it and says install os x 10.5 when I click the arrow the pointer freezes and the computer does nothing. Everytime I turn it on now it goes to the file folder with question mark. Any help would be great. I really need my mac back up and running.

Welcome to Apple Discussions!
Exactly which MBP do you have? And which Leopard install disc? Is it one of the original gray system discs that came with your Mac, or something else? Do you have the original gray system disc? Can you boot from it?
I'm thinking there may be some incompatibility with the disc and the Mac. If, for example, your Mac originally shipped with Snow Leopard, then you won't be able to install Leopard because it is an older operating system. If you could give more information about your Mac and the Leopard disc, it would help us to see what the problem might be and what needs to be done to resolve it.

Similar Messages

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Getting white screen with file folder and question mark on it...help

My MacBook Pro starts up and only shows a white screen with a file folder with question mark on it. I have not had problems prior to this. Help!,

That means that no valid system could be found to boot from. What might have caused that is hard to say, but try referring to this document:
http://support.apple.com/kb/ts1440
Note that if you are using Mac OS X 10.7 (Lion), you don't start up from your install disk. Hold down command-R at startup instead.

I powered up my macbook and there is a file folder with question mark on the screen flashing. What does that mean?

Powered up Mac book and screen showing file folder with question mark flashing?

A flashing question mark appears when you start your Mac
Hope that solves your issue.

Restarted and received a blinking file folder with question mark image.

I left my computer sitting while I was working on homework long enough for the screen saver to come on (I'm not sure exactly how long it was). Earlier in the day, I had to force quit safari and then later it unexpectedly quit several times. While my computer was sitting, it looked like it does when it restarts. I waited until it started to come back up, and instead of coming up to the desktop, it came up with a blinking file folder and question mark. I had not done anything unusual with it, and had not tried to restore it. My dad was working on trying to fix it, and inserted the OS X disk. When the options came up, in the repair feature, the disk could not locate my harddrive. I was wondering if anyone else had encountered this problem, and if so how it was resolved. If anyone had any tips or ideas of things I could try that would be great. I can't really get it to an apple store soon, and I'm a student so my computer is very important to me. Thanks.

Mornin' John,
I also have an OWC external firewire drive that I tried to install OSX Tiger to but was told that I could not install OSX Tiger on the external drive.
What Format is that Drive? GUID/MacOS Extended? It should work if the right format.
Is there any way to run Disk Warrior from the external hard drive ... to try and rectify this issue, or at least get my data off the dead drive (if it is so)?
From the external only if you can get OSX installed.
What version is it? Do you mot have the CD?
or from my PowerBook G4
Possibly, with the MaBook in FW Target Mode
http://docs.info.apple.com/article.html?artnum=58583
If DiskWarrior can't fix it, you might try Data Rescue II...
http://www.alsoft.com/DiskWarrior/
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).

What does a white screen with a file folder and question mark indicate?

what does a white screen with a file folder and question mark indicate upon start up?

That the computer can't find a useable boot volume.
Boot from your grey installer DVD disc 1 (hold down the C key on startup or hold down Alt/option on start and choose the installer disc).
OK the language page (if present). From the installer screen, go to the menu bar and choose Disk Utility; depending on the OS version it may be in the Utilities menu or Tools menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.). Run Repair Disk (not Disk permissions). If problems are reported as repaired, run it again until you get a message in green "the volume seems to be OK".
If it says it can't repair the disc, you may need heavier guns such as DiskWarrior or TechTool to attempt a rescue.
Hope you have backups; retrieving data from adead drive can be expensive and tricky.

27 inch Imac Intel won't boot up. Screen ligthts up, then shows a flashing file folder w question mark. What can I do to find the problem?

27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?

Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac

My MacBook is 5 years old. Until recently, I had no problems. I had a CD that got stuck in the drive and I was able to remove it. But now there is a grey screen with a file folder and question mark in the middle. How do I fix this?

I have tried rebooting the MacBook several times as well as resetting it. If I turn it off and then turn it back on while holding "option" a mouse appears on the screen but nothing else. This started earlier today when the screen froze and I had to restart the computer (with the CD still in it). I have not been able to get back to the computer since.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the operating system files on the hard drive are somehow corrupted or damaged.
If you don't have your install disks you can get the 10.4 gray disks by calling AppleCare. 1-800-APL-CARE (1-800-275-2273) They can send them to you for about $16 per disk plus S & H. Just give them your serial number and they'll know which ones you need. With the original disks you also get the iLife that was current when your MacBook was bought included on the #2 disk.
Or if you don't have any files you want to recover from your hard drive you can get Snow Leopard for $29 if you have at least 1gb of RAM and a working DVD drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY You would then erase and reformat your hard drive and install Snow Leopard. You won't need the box set unless you want the latest iLife and iWork. If you only want iPhoto or other single apps you can get them from the App Store in 10.6.6. iPhoto, iMovie and Garage Band for $15 each and Pages, Keynote and Numbers for $20 each.
If you have files you want to recover you can get a larger hard drive and put your old hard drive in an external case. After you install the Mac OS on the new hard drive you can plug in the old hard drive in the external case by the USB connection and try to access it that way.
To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

File folder with question mark, file folder with question mark

Battery died went to turn on computer with adapter plug...
white screen with flashin file folder with a question mark???
How do i fix this?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

File folder with question mark.....

In the UK, I do not have the back up disk, i am getting the file folder with the question mark. Anyone know what i can do?

OS X version?
Read here:
http://support.apple.com/kb/TS1440

File folder with question mark inside of it

I have an older MacBook and a couple of days ago upon turning on the Mac a file folder appeared with a question mark inside of it. What does it mean and how do I fix the problem. Thanks

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

File Folder with Question Mark: Hard Drive Failure?

I did a search on this topic in these forums, so I think I know what's going on but want to confirm:
I shut down my MacBook Pro this morning and tried restarting it but got a blinking file folder with a question mark. Tried to restart from Disk Warrior (pressing C while restarting) but got the same thing.
Does this mean my hard drive has failed and there's no remedy I can try myself?

The flashing question mark is usually a sign that the hard drive has failed and drives can fail at any point, yours may simply have some bad sectors; it could also be the logic board. It should boot from the DiskWarrior disk though. Try again.

Grey screen with file folder blinking question mark in middle of folder

My Macbook suddenly turned off leaving me with a grey screen. In the middle of the screen there is a file folder blinking with a question mark in the middle of the folder. It will not turn back on even if I attempt to restart it. What does this mean and can I fix it myself or must it be sent to apple.

This may help: A flashing question mark appears when you start your Mac.
If none of the solutions work then you will need to do an Archive and Install:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

File folder w/ question mark

Similar Messages

Maybe you are looking for