File format error for xml file

Hi!
We are trying to upgrade our SAP 4.6C to EHP4.
While "configuration roadmapstep", system asks us the XML file we have
produced via solman. When we enter the path of the file system gives theerror below:
The selected configuration file
("E:\downloadupg\SMSDXML_FKQ_20100917142727.656.xml") is not useable.
Reason: "File format error"
We have tried the txt file instead of xml file. The result was same.
You can find the details of our system.
4.6D EX2 32 bit kernel
windows 2003 64 bit OS
sql 2005 64 bit database software
We have to upgrade our system until that monday.
Please help us as soon as possible.
Best regards
Noyan Durna

Hello Noyan,
first, the official information: please refer to note #1022704 - for source release 4.6, the TXT file has to be used instead of the XML file. Otherwise, 'File format error' will occur as in your case.
But since you tried this option, you should turn your attention to the XML itself, which must contains entries that are not handled by function module OCS_GET_UPG_STACK_INFO in the 4.XX source systems. The function module only expects the entries [SPAM_CVERS], [PRDVERS] and [SWFEATURE].  Any other entries present on the file can cause an error. 
Please check your file for other entries like [APP_SYSTEM], [SWFEATUREINC], [TECHUSAGES], [INITIAL_CVERS], [EXPORT_CVERS], and [DVD_SET]; this might be the cause of the error. 
In order to workaround this, you can either edit the file and remove the invalid entries or recreate it (w/o this entries also).
Best regards,
Tomas Black

Similar Messages

  • EhP4 Stack file format error in xml

    Hi all,
    My intention is to Upgrade an sap system 4.6C to Ecc6 including EhP4.
    i am running through many problems since now
    Here is my newest one:
    In solution manager i calculated a stack.xml. After that, i copied the files to the test system which i am upgrading. Now in phase "Stack configuration" i must provide the xml-file.
    when i click next, i get an error:
    The selected configuration file ("M:InstCds
    w70ehp1SMSDXML_P01_20090520113757.307.xml") is not useable.
    Reason: "File format error"
    Update ....
    OK my fault.
    in SAP Note Number: 1022704 is the info that in case of start release BELOW 4.6, you cannot use the xml-file, you have to choose the txt-file
    Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
    i tried different files but every time the same error ...
    Any idea ?
    regards,
    Bjoern
    Edited by: Björn Trabes on May 20, 2009 4:23 PM

    Sorry,
    As i wrote
    Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
    is work for the txt-files in this way, that the stack can be read.
    It is a little bit confusing, as the german note says: as of 4.6 and lower
    but the english note says: lower than 4.6
    so there is a little diffrence
    But now i have the Problem, that the generated Stack-file from the solution manager is invalid:
    "# Error message set: 'Stack file is invalid: keep version w/o component upgrade'"

  • Unknown File Format Error while Uploading file through SFP in Note Implemen

    Hello All,
    I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
    While doing the manual steps given in the attachment; I am getting following error.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Manual step listed in the attachment is given below:
    Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
    a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
    b) Unzip the .zip file
    c) Execute transaction code 'SFP'.
    d) Enter 'Form' as 'HR_INTAXF162006'.
    e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
    f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
    file system.
    g) Save the form and activate the same.
    Please help/suggest.
    Thanks in advance.
    Arti Dobariya

    Hi,
    ADS has to be configured to perform those manual steps.
    Please check the note 1580196 GTS: Error occurred when uploading file
    (unknown file format).
    The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
    Since ADS was not configured in our system; we end up using  the option of running form 16 in SAP Script.
    Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
    Regards,
    Arti

  • Unknown File Format Error while Uploading file through SFP

    Hello All,
    I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
    While doing manual steps given in the attachment; I am getting following error.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Manual step listed in the attachment is given below:
    Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
    a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
    b) Unzip the .zip file
    c) Execute transaction code 'SFP'.
    d) Enter 'Form' as 'HR_INTAXF162006'.
    e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
    f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
    file system.
    g) Save the form and activate the same.
    Please help/suggest.
    Thanks in advance.
    Arti Dobariya

    Hi,
    ADS has to be configured to perform those manual steps.
    Please check the note 1580196 GTS: Error occurred when uploading file
    (unknown file format).
    The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
    Since ADS was not configured in our system; we end up using  the option of running form 16 in SAP Script.
    Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
    Regards,
    Arti

  • How I fixed the "unsupported image format" error for RAW files

    After deleting the .plist file stopped working, I decided to go ahead & reinstall Aperture and...voila--problem fixed. RAW files are again displaying without any trouble (just like they used to!)
    G5 2.3DP   Mac OS X (10.4)  

    Just an update. Restarted computer and attempted rebuilds of iPhoto library a couple more times and finally files and photos mostly recovered, except for those I had tried to open. Aperture seems to have a problem, or a host of them, dealing with RAW files, and there is no update yet for the Sony RX1R for Aperture or iPhoto. Lightroom 5, on the other hand, seems to work great with these files directly, so that will be where all photos go for now. Will iPhoto and Aperture just become old archives? It is so infuriating that Apple does not allow for simple importing and exporting compatibility with such an excellent program as Lightroom 5 just to protect their somewhat poorly supported Aperture. I've been a staunch Apple supporter and user since the 80's, but having more doubts about the direction this company is taking.

  • Duplicate File Name error for Unicode file names

    I am trying to rip my music collection from CDs to iTunes. I have decided to use my local language (Bangla/Bengali) as Track/Artist names using Unicode. I can edit the CD Info perfectly. The problem started when I try to import the tracks to iTunes as AAC/mp3. The first track is always imported ok but subsequent tracks fails to be imported. iTunes gave an error message saying the file name already exists where as it was not.
    Please help.

    I reported this to Adobe customer support on 11/29, and here is their response:
    Wednesday, December 5, 2007 12:51:27 PM PST
    Hello John,
    Thank you for contacting Adobe® Web Support for assistance with Adobe
    Photoshop Elements® 6.0.
    I understand that images are deleted if you accidentally try to move
    them to a folder that already includes a file of the same name.
    Thank you for bringing this to our attention. I was able to replicate
    this behavior as well. The best method to report errors of this nature
    is using the following form on our website:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
    I hope this information helps to resolve your issue. If you require
    further assistance with this issue, please update your web case with
    complete details, including what steps you have applied and any error
    messages you are receiving.
    You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
    Kind regards,
    Alan C.
    Adobe Web Support

  • REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

    Hi All,
    We are trying to access the Create Deployment method stated below
    http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
    We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
    fine.
    Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
    part.
    byte[] bytes =
    new byte[fupldConfig.PostedFile.ContentLength + 1];
                fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
    string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
    string base64ConfigurationFile = a.ToBase64();
    X509Certificate2 certificate =
    CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
    HostedService.CreateNewDeployment(certificate,
    ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
    "2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
    "AzureEcoystemDeployment",
    "http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
    "AzureEcoystemDeployment", base64ConfigurationFile,
    true, false);   
    <summary>
    /// </summary>
    /// <param name="certificate"></param>
    /// <param name="subscriptionId"></param>
    /// <param name="version"></param>
    /// <param name="serviceName"></param>
    /// <param name="deploymentSlot"></param>
    /// <param name="name"></param>
    /// <param name="packageUrl"></param>
    /// <param name="label"></param>
    /// <param name="base64Configuration"></param>
    /// <param name="startDeployment"></param>
    /// <param name="treatWarningsAsError"></param>
    public static
    void CreateNewDeployment(X509Certificate2 certificate,
    string subscriptionId,
    string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
    string name, string packageUrl,
    string label, string base64Configuration,
    bool startDeployment, bool treatWarningsAsError)
    Uri uri = new
    Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
    XNamespace wa = Constants.xmlNamespace;
    XDocument requestBody =
    new XDocument();
    String base64ConfigurationFile = base64Configuration;
    String base64Label = label.ToBase64();
    XElement xName = new
    XElement(wa + "Name", name);
    XElement xPackageUrl =
    new XElement(wa +
    "PackageUrl", packageUrl);
    XElement xLabel = new
    XElement(wa + "Label", base64Label);
    XElement xConfiguration =
    new XElement(wa +
    "Configuration", base64ConfigurationFile);
    XElement xStartDeployment =
    new XElement(wa +
    "StartDeployment", startDeployment.ToString().ToLower());
    XElement xTreatWarningsAsError =
    new XElement(wa +
    "TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
    XElement createDeployment =
    new XElement(wa +
    "CreateDeployment");
                createDeployment.Add(xName);
                createDeployment.Add(xPackageUrl);
                createDeployment.Add(xLabel);
                createDeployment.Add(xConfiguration);
                createDeployment.Add(xStartDeployment);
                createDeployment.Add(xTreatWarningsAsError);
                requestBody.Add(createDeployment);
                requestBody.Declaration =
    new XDeclaration("1.0",
    "UTF-8", "no");
    XDocument responseBody;
    RestApiUtility.InvokeRequest(
                    uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
    HttpStatusCode.Accepted, requestBody, certificate, version,
    out responseBody);
    <summary>
    /// A helper function to invoke a Service Management REST API operation.
    /// Throws an ApplicationException on unexpected status code results.
    /// </summary>
    /// <param name="uri">The URI of the operation to invoke using a web request.</param>
    /// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
    /// <param name="expectedCode">The expected status code.</param>
    /// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
    /// <param name="responseBody">The XML body returned by the request, if any.</param>
    /// <returns>The requestId returned by the operation.</returns>
    public static
    string InvokeRequest(
    Uri uri,
    string method,
    HttpStatusCode expectedCode,
    XDocument requestBody,
    X509Certificate2 certificate,
    string version,
    out XDocument responseBody)
                responseBody =
    null;
    string requestId = String.Empty;
    HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
                request.Method = method;
                request.Headers.Add("x-ms-Version", version);
                request.ClientCertificates.Add(certificate);
                request.ContentType =
    "application/xml";
    if (requestBody != null)
    using (Stream requestStream = request.GetRequestStream())
    using (StreamWriter streamWriter =
    new StreamWriter(
                            requestStream, System.Text.UTF8Encoding.UTF8))
                            requestBody.Save(streamWriter,
    SaveOptions.DisableFormatting);
    HttpWebResponse response;
    HttpStatusCode statusCode =
    HttpStatusCode.Unused;
    try
    response = (HttpWebResponse)request.GetResponse();
    catch (WebException ex)
    // GetResponse throws a WebException for 4XX and 5XX status codes
                    response = (HttpWebResponse)ex.Response;
    try
                    statusCode = response.StatusCode;
    if (response.ContentLength > 0)
    using (XmlReader reader =
    XmlReader.Create(response.GetResponseStream()))
                            responseBody =
    XDocument.Load(reader);
    if (response.Headers !=
    null)
                        requestId = response.Headers["x-ms-request-id"];
    finally
                    response.Close();
    if (!statusCode.Equals(expectedCode))
    throw new
    ApplicationException(string.Format(
    "Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                        uri.ToString(),
    Environment.NewLine,
                        (int)statusCode,
                        statusCode,
                        responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
    return requestId;
    But every time we are getting the below error from the line
     response = (HttpWebResponse)request.GetResponse();
    <Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
      <Code>BadRequest</Code>
      <Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
    </Error>
     Any help is appreciated.
    Thanks,
    Shubhendu

    Please find the request XML I have found it in debug mode
    <CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
      <Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
      <PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
      <Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
      <Configuration>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</Configuration>
      <StartDeployment>true</StartDeployment>
      <TreatWarningsAsError>false</TreatWarningsAsError>
    </CreateDeployment>
    Shubhendu G

  • Trying to copy a 10gb file to a memory stick but theres an error msg file to large for the file format of the stick. is there a way around this

    trying to copy a 10gb file to a memory stick but there's an error msg, file to large for the file format of the stick. is there a way around this

    If you use 'Disc Utility' you can format the stick (this will erase its contents) to be exFat which will still work with Mac and Windows but allow a larger file sizes to be placed onto the stick.
    Disc Utility > Click the drive on the left > Erase (tab) > Change format to ExFat > Erase > Try putting the file on to the stick again.

  • Ld: file was built for unsupported file format...for architecture armv7

    hi:
    I recently developed a project with custom ANE and I get this error msg when compile ipa since I upgraded the sdk from 3.5 to 3.8.
    ANE compile CMD:
    adt -package -storetype pkcs12 -keystore ane.p12 -storepass 1234 -target ane yund.ane extension.xml -swc yunding.swc -platform iPhone-ARM -platformoptions platform.xml IDS.framework library.swf libIslandIDSANE.a
    platform.xml:
    <platform xmlns="http://ns.adobe.com/air/extension/3.5">
         <sdkVersion>6.1</sdkVersion>
         <linkerOptions>
                        <option>-w</option>
            <option>-ios_version_min 4.2</option>
                        <option>-framework Foundation</option>
                        <option>-framework StoreKit</option>
                        <option>-framework AdSupport</option>
                        <option>-framework QuartzCore</option>
                        <option>-framework UIKit</option>
                        <option>-framework CoreGraphics</option>
                        <option>-framework SystemConfiguration</option>
                        <option>-framework Foundation</option>
                        <option>-lz</option>
         </linkerOptions>
                 <packagedDependencies>
                        <packagedDependency>IDS.framework</packagedDependency>
              </packagedDependencies>
    </platform>
    msg:
    ld: file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): C:\Users\timoo\AppData\Local\Temp\139d9782-79fd-422a-8c15-da1da2da8c53/IDS.framework/IDS for architecture armv7
    Compilation failed while executing : ld64
    help me
    thx

    Have you Found the way to solve this problem yet?
    I  have got the same problem. Here is the error log when building the IPA:
    ld: warning: ignoring file /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack, file was built for unsupported file format ( 0x56 0x65 0x72 0x73 0x69 0x6f 0x6e 0x73 0x2f 0x43 0x75 0x72 0x72 0x65 0x6e 0x74 ) which is not the architecture being linked (armv7): /var/folders/c0/m8m1_z5915qblkj9d_7jhmcw0000gn/T/3cb383e9-0092-4b1c-909f-5c219b2fbcd4/Par tytrack.framework/Partytrack
    ld: warning: CPU_SUBTYPE_ARM_ALL subtype is deprecated: /Users/apple/Documents/flexsdk/flex3.9/lib/aot/lib/libDebugger1.arm-air.a(avmplusDebugger .cpp.o)
    Undefined symbols for architecture armv7:
      "_OBJC_CLASS_$_Partytrack", referenced from:
          objc-class-ref in libcom.haibin.extension.PromotionAPI.a(partyTrackAPI.o)
    ld: symbol(s) not found for architecture armv7
    Compilation failed while executing : ld64
    My platformoption.xml content is：
    <platform xmlns="http://ns.adobe.com/air/extension/3.8">
        <sdkVersion>7.0</sdkVersion>
        <linkerOptions>
            <option>-ios_version_min 4.3</option>
            <option>-framework CoreData</option>
            <option>-framework UIKit</option>
            <option>-framework Foundation</option>
            <option>-framework Security</option>
            <option>-weak_framework AdSupport</option>
        </linkerOptions>
        <packagedDependencies>
            <packagedDependency>Partytrack.framework</packagedDependency>
        </packagedDependencies>
    </platform>
    And my build command are:
    <target name="package" description="Create the extension package">
    <exec executable="${FLEX_HOME}/bin/adt" failonerror="true" dir="${basedir}">
    <env key="AIR_SDK_HOME" value="${FLEX_HOME}"/>
    <arg value="-package"/>
    <arg line="-storetype pkcs12"/>
    <arg line="-keystore testkey.p12"/>
    <arg line="-storepass 123456"/>
    <arg line="-target ane"/>
    <arg value="../${ANE_NAME}.ane"/>
    <arg value="extension.xml"/>
    <arg line="-swc ../swc/${ANE_NAME}.swc"/>
    <arg line="-platform iPhone-ARM -platformoptions platform.xml -C ../iPhone-ARM/ . "/>
    <arg line="-platform Android-ARM -C ../Android-ARM/ ."/>
    <arg line="-platform default -C ../default/ ."/>
    </exec>
    </target>
    File "Partytrack.framework " is in the directory "iPhone-ARM"

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • "Error retrieving xml file from database"

    Hello All,
    I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
    *"System failure:Error retrieving xml file from database".*
    My RDBMS is - SQL Server 2005
    OS - Windows 2003 Server
    I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
    Thanks much,
    Varma.

    Hi,
    Ive seen this before.
    If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
    I think you may have some invalid entries in your sys database.
    Seb
    www.taysols.com.au

  • Return The remote server returned an error: (403) Forbidden error for some file types

    hi
    am using below code to get the byte array 
    byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
    for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
    it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
    Thanks in Advance

    Hi,
    It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
    string account = ConfigurationManager.AppSettings["StorageAccountName"];
    //string account = CloudConfigurationManager.GetSetting("StorageAccountName");
    //string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
    string key = ConfigurationManager.AppSettings["StorageAccountName"];
    string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
    return CloudStorageAccount.Parse(connectionString);
    If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
    tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • FAQ: How to resolve "Unexpected File Format" error with Flash Professional CS5.5?

    You may encounter errors when you attempt opening or saving files using Flash Professional CS5.5.  To address the above problem, Adobe released an updater for Flash Pro CS5.5 (version 11.5.1).
    The following article explains about the errors and Flash CS5.5 updater released to handle them in detail:
    http://blogs.adobe.com/flashpro/2012/07/24/unexpected-file-format-error-on-opening-flash-f iles-using-flash-cs5-5/

    Which operating system are you using?  If you look in the Adobe Download Assistant is it still downloading the install files?

  • Unsupported architecture or file format error at line 13 of file 'dbxrc'

    Hi ,
    I have downloaded sun studio 12
    bash-3.00# version
    Machine hardware: i86pc
    OS version: 5.10
    Processor type: i386
    Hardware: i86pc
    The following components are installed on your system:
    Sun Studio 12
    Sun Studio 12 C Compiler
    Sun Studio 12 C++ Compiler
    Sun Studio 12 Tools.h++ 7.1
    Sun Studio 12 C++ Standard 64-bit Class Library
    Sun Studio 12 Garbage Collector
    Sun Studio 12 Fortran 95
    Sun Studio 12 Debugging Tools (including dbx)
    Sun Studio 12 IDE
    Sun Studio 12 Debugger GUI
    Sun Studio 12 Performance Analyzer (including collect, ...)
    Sun Studio 12 X-Designer
    Sun Studio 12 VIM editor
    Sun Studio 12 XEmacs editor
    Sun Studio 12 Performance Library
    Sun Studio 12 LockLint
    Sun Studio 12 Building Software (including dmake)
    Sun Studio 12 Documentation Set
    Sun Studio 12 /usr symbolic links and GNOME menu item
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/cc": Sun C 5.9 SunOS_i386 Patch 124868-01 2007/07/12
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/CC": Sun C++ 5.9 SunOS_i386 Patch 124864-01 2007/07/25
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.3 SunOS_i386 Patch 127002-01 2007/07/18
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/dbx": Sun Dbx Debugger 7.6 SunOS_i386 Patch 124873-01 2007/07/12
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.6 SunOS_i386 Patch 126996-01 2007/07/17
    version of "/opt/sam_sun_studio/SUNWspro/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.8 SunOS_i386 Patch 126504-01 2007/07/19
    bash-3.00#
    I am basically trying to analyze the core file that has been generated during a directory server 6 crash.
    I am continuously getting the following error when running the opencore command from the pkg_app script
    # ./opencore
    dbx: /opt/suresh/pkg_app/app/ns-slapd has unsupported architecture or file format
    error at line 13 of file 'dbxrc'
    dbx: warning: using the alternate init file: dbxrc
    (dbx)
    I have set the following environment variables
    dbxenv core_lo_pathmap on
    dbxenv suppress_startup_message 6.2
    pathmap /distr/sundirsvr/6.2EE/ds6/lib/64 $PWD/app
    pathmap /distr/sundirsvr/6.2EE/ds6/lib/sparcv9 $PWD/app
    pathmap /distr/sundirsvr/6.2EE/dsee6/private/lib/sasl2/sparcv9 $PWD/app
    pathmap /distr/sundirsvr/6.2EE/dsee6/private/lib/sparcv9 $PWD/app
    pathmap /lib $PWD/app
    pathmap /lib/sparcv9 $PWD/app
    pathmap /platform/sun4v/lib/sparcv9 $PWD/app
    pathmap /usr/lib/sparcv9 $PWD/app
    pathmap /usr/platform/SUNW,Sun-Fire-T200/lib $PWD/app
    loadobject -exclude libposix4.so
    debug $PWD/app/ns-slapd $COREFILE
    What could be the reason for the above error being shown continuously. Am I missing anything ?
    Thanks

    Hi,
    last few lines of alert log file are
    Successful open of redo thread 1
    Thu Aug 23 09:45:18 2007
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Thu Aug 23 09:45:18 2007
    SMON: enabling cache recovery
    Thu Aug 23 09:45:21 2007
    Successfully onlined Undo Tablespace 1.
    Thu Aug 23 09:45:21 2007
    SMON: enabling tx recovery
    Thu Aug 23 09:45:21 2007
    Database Characterset is WE8ISO8859P1
    Thu Aug 23 09:45:22 2007
    Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/orcl1/bdump/orcl1_smon_5370.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01502: index 'SYS.I_DEPENDENCY2' or partition of such index is in unusable state
    replication_dependency_tracking turned off (no async multimaster replication found)
    Thu Aug 23 09:45:32 2007
    Starting background process QMNC
    QMNC started with pid=18, OS id=5392
    Thu Aug 23 09:45:34 2007
    Errors in file /home/oracle/oracle/product/10.2.0/db_1/admin/orcl1/udump/orcl1_ora_5384.trc:
    ORA-07445: exception encountered: core dump [kokaocr()+577] [SIGSEGV] [Address not mapped to object] [0x98] [] []
    Thu Aug 23 09:51:20 2007

  • CS5 - trying to load a new style .asl file - keep getting "error, because no parser or file format can open the file."  what gives?

    trying to load a new style for a project.  CS5 PSD.  the .asl file when dragged into the doc, gives the the following "error, because no parser or file format can open the file."  what gives?

    .asl files are layer styles
    You can go to Window>Styles and then load the styles from the styles panel fly-out menu

Maybe you are looking for