File format problems

i am making a movie, but most of the footage i captured over the past year or two with Adobe Premiere with a PC Computer. So when i put that footage on the timeline and try to play it back, a notice comes up that says that the footage needs to be recaptured or optimized for final cut pro. Since i cant recapture any of this footage, i need to know how to reformat this footage so i can use it. It said something about using the media manager or the compressor or something. I am very new to final cut pro so i dont understand.

Well, you can either
1. Import into FCP, put each clip on the timeline and export to the appropriate format. Reimport.
2. Open each clip in Quicktime Pro and export to the appropriate format. Import into FCP.
Cheers
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

Similar Messages

Excel File Format Problem while downloading in ALV Grid

Hi All,
My program gives an ALV Grid Output which contains the file download button , when I choose spread sheet as the file format , the actual data starts only from 4th line and the lines above it contain date, heading etc and the rest are blank. Is it possible that I can download only the records in the grid output with the column names and not the unnecessary log?
Also the format is not proper excel format, this same file will be used for upload into another program using the Function Module 'TEXT_CONVERT_XLS_TO_SAP'. When I load the file saved in the above format, this Function Module always fails.
Please let me know any solution for this problem
Thanks in Advance.

Hi
try this code----
*&      Form DOWNLOAD_EXCEL_TEMPLATE
      text
--> p1        text
<-- p2        text
FORM download_excel_template .
TYPES: BEGIN OF lt_data,
            field1(20),
            field2(30),
            field3(20),
            field4(20),
            field5(20),
            field6(30),
            field7(15),
            field8(10),
            field9(10),
            field10(20),
            field11(20),
            field12(10),
            field13(20),
            field14(20),
          END OF lt_data.
DATA: lv_file TYPE rlgrap-filename,
        li_data TYPE STANDARD TABLE OF lt_data,
        wa_data TYPE lt_data,
        lv_pathcheck type c,
        lv_file1 type string.
wa_data-field1 = ''.
APPEND wa_data TO li_data.
REFRESH gi_header.
wa_header-name = 'Company Code'.
APPEND wa_header TO gi_header.
wa_header-name = 'Main Asset Number'.
APPEND wa_header TO gi_header.
wa_header-name = 'Asset Sub Number'.
APPEND wa_header TO gi_header.
wa_header-name = 'Document Date'.
APPEND wa_header TO gi_header.
wa_header-name = 'Posting Date'.
APPEND wa_header TO gi_header.
wa_header-name = 'Asset Value Date'.
APPEND wa_header TO gi_header.
wa_header-name = 'Item Text'.
APPEND wa_header TO gi_header.
wa_header-name = 'Reference'.
APPEND wa_header TO gi_header.
wa_header-name = 'Allocation'.
APPEND wa_header TO gi_header.
wa_header-name = 'Amount Posted'.
APPEND wa_header TO gi_header.
wa_header-name = 'Percentage Rate'.
APPEND wa_header TO gi_header.
wa_header-name = 'Quantity'.
APPEND wa_header TO gi_header.
wa_header-name = 'Prior-Yr Quantity'.
APPEND wa_header TO gi_header.
wa_header-name = 'Curr-Yr Quantity'.
APPEND wa_header TO gi_header.
lv_file = gv_file.
lv_file1 = gv_file.
CALL METHOD cl_gui_frontend_services=>directory_exist
    EXPORTING
      directory            = lv_file1
    RECEIVING
      result               = lv_pathcheck
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      wrong_parameter      = 3
      not_supported_by_gui = 4
      OTHERS               = 5.
   FIND '.xls' IN lv_file IGNORING CASE.
IF sy-subrc = 0.
    REPLACE '.XLS' IN lv_file WITH ' ' IGNORING CASE.
ENDIF.
FIND '.TXT' IN lv_file IGNORING CASE.
IF sy-subrc = 0.
    REPLACE '.TXT' IN lv_file WITH ' ' IGNORING CASE.
ENDIF.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
    EXPORTING
      file_name                 = lv_file
      data_sheet_name           = 'DATA'
    TABLES
      data_tab                  = li_data
      fieldnames                = gi_header
    EXCEPTIONS
      file_not_exist            = 1
      filename_expected         = 2
      communication_error       = 3
      ole_object_method_error   = 4
      ole_object_property_error = 5
      invalid_pivot_fields      = 6
      download_problem          = 7
      OTHERS                    = 8.
IF sy-subrc <> 0.
    MESSAGE ID gv_msgid TYPE 'E' NUMBER 002.
ENDIF.
ENDFORM.                    " DOWNLOAD_EXCEL_TEMPLATE
regards,
Prashant

Nokia Asha 200 image file format problem

hello. I just bought a Nokia Asha 200 recently, and I am happy with it. The only problem that I am currently having is with my phone's captured image's file format. It used to be .jpg and then it suddenly became .nrw and I can't open it when I tranfer the images to my computer. Whenever I convert it it just becomes black. I restored the factory settings of my phone but the format is still .nrw.
I want to know what caused it and how can I revert back the image file format to .jpg.
Thank you so much in advance.
Good day.
Solved!
Go to Solution.

Because Nokia s40 Phones automatically Enhancing the Image Captured and reduces it's size. The reason why you're Photos is in .nrw format because you didn't wait to process it. Follow these steps so it won't occuring again On the Camera Choose Options > Settings > Image Preview > Choose End Manually. Then wait for pictures to be processed you captured (sometimes you will notice that the image enhanced). It also can be done in the background. Hope it Helps.
I love T9 Bar Phones | I used to be a Sony Ericson fan before but they leave the low end Phones so I have to switch to Nokia | LG Optimus L5 II and Nokia 206 3

ABAP to XML file - Formatting problem and UTF-8 requirement

Hi Everyone,
Could you please guide us on the ABAP coding required to get the proper XML file format. We have prepared the code for downloading SAP transaction data into an XML file format. However, we are stuck with an improper format as per Example 1.
The file format we get is this:
Example 1:
<?xml version="1.0"?><FDXLMDOrd><FXNHdrLp><CrtDtTm>20070613094517</CrtDtTm><MsgID>319304155</MsgID><MsgTyp>850</MsgTyp><MsgSubTyp>SALES_A</MsgSubTyp><Pr
<RcvTP>FSCS</RcvTP><SndSrc>FXN</SndSrc><RcvSrc>EIB</RcvSrc><UsrID>VAR</UsrID></FXNHdrLp><OrdHdrLp><OrdNbr>319304155</OrdNbr><OrdActnCD>9</OrdActnCD><Ord
teCarrReq>FDE</RteCarrReq><RteTptSvcReq>FEIP</RteTptSvcReq></DprtRteLp><SpecInstrLp><SpecInstrTyp>SHIP</SpecInstrTyp><SpecInstr>Example Packing Instruct
les Order</RefDesc></RefLp><RefLp><RefIDQual>CPO</RefIDQual><RefID>test 1 line 1 pc - s</RefID><RefDesc>Customers Customer Purchase Order</RefDesc></Ref
Typ><EntIDQual>91</EntIDQual><EntID>H00092</EntID><EntNm>VLAD BOBES</EntNm><Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA
></AdrLnLp><ConLp><ConTypCD>IC</ConTypCD><ConNm>VLAD BOBES</ConNm><CommLp><CommNbrQual>TE</CommNbrQual><CommNbr>514-731-8361</CommNbr></CommLp></ConLp><
<Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA</CtryISOCD><AddlNmLp><AddlNm1>VLAD BOBES</AddlNm1></AddlNmLp><AdrLnLp><Str
However, the format need to look like this as in Example 2 below.
We also need help in how to get " encoding="UTF-8"?> " as part of the file format.
Example 2:
<?xml version="1.0" encoding="UTF-8"?>
<FDXLMDProdRcpt>
    <FXNHdrLp>
        <CrtDtTm>20070612151817</CrtDtTm>
        <SessID>26796</SessID>
        <MsgTyp>861</MsgTyp>
        <MsgSubTyp>WRE_A</MsgSubTyp>
        <PrcsingPrty>5</PrcsingPrty>
        <SndTPQualCD>ZZ</SndTPQualCD>
        <SndTP>FSCS</SndTP>
        <RcvTPQualCD>ZZ</RcvTPQualCD>
        <RcvTP>EIB</RcvTP>
        <SndSrc>YANTRA</SndSrc>
        <RcvSrc>EIB</RcvSrc>
        <UsrID>VAR</UsrID>
    </FXNHdrLp>
    <ProdRcptHdrLp>
        <ShpID>VAR20070612NCHIC1</ShpID>
        <ShpTyp> </ShpTyp>
        <ShpActnCD>00</ShpActnCD>
        <InTransMrgTyp> </InTransMrgTyp>
        <ShpVolUOM>CI</ShpVolUOM>
        <ShpWgtUOM>LB</ShpWgtUOM>
        <ShpTotVol>310022.00</ShpTotVol>
        <ShpTotWgt>861.00</ShpTotWgt>
        <DtTmLp>
            <DtTyp>050</DtTyp>
            <DtTmQual>501</DtTmQual>
            <DtTm>2007-06-12T15:07:41-04:00</DtTm>
        </DtTmLp>
        <AdrLp>
            <EntTyp>RC</EntTyp>
            <EntIDQual>93</EntIDQual>
            <EntID>NCHIC</EntID>
            <EntNm>NCHIC</EntNm>
            <AutoCrtTrdPar>0</AutoCrtTrdPar>
            <AutoCrtTrdParRole>0</AutoCrtTrdParRole>
            <AutoUpdtTrdPar>0</AutoUpdtTrdPar>
        </AdrLp>
        <ProdRcptTptLp>
            <TptIDQual>BOL</TptIDQual>
            <TptSCAC> </TptSCAC>
            <TptID> </TptID>
Thanks and Best Regards
Sitaraman

You could try to use the following coding:
*& Report ZUS_SDN_UC_XML_TO_UTF8_TRANSF
REPORT zus_sdn_uc_xml_to_utf8_transf.
define local data
CONSTANTS:
gc_encoding           TYPE string VALUE 'UTF-8'.
DATA:
gd_result             type string,
go_ixml               TYPE REF TO if_ixml,
go_stream_factory     TYPE REF TO if_ixml_stream_factory,
go_encoding           TYPE REF TO if_ixml_encoding,
go_resstream          TYPE REF TO if_ixml_ostream.
DATA:
gt_knb1    TYPE STANDARD TABLE OF knb1,
gd_xml     TYPE string,
gt_xml     TYPE TABLE OF string.
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1 UP TO 10 ROWS
      WHERE bukrs = '1000'.
go_ixml = cl_ixml=>create( ).
go_stream_factory = go_ixml->create_stream_factory( ).
go_encoding = go_ixml->create_encoding( character_set = gc_encoding
                                        byte_order = 0 ).
go_resstream =
              go_stream_factory->create_ostream_cstring( gd_result ).
CALL METHOD go_resstream->set_encoding
    EXPORTING
      encoding = go_encoding.
XML Transformieren
CALL TRANSFORMATION id_indent
    SOURCE     itab = gt_knb1
    RESULT XML go_resstream.
APPEND gd_result TO gt_xml.
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
     BIN_FILESIZE              =
      filename                  = 'C:\temp\xml_to_utf8.txt'
     FILETYPE                  = 'ASC'
     APPEND                    = SPACE
     WRITE_FIELD_SEPARATOR     = SPACE
     HEADER                    = '00'
     TRUNC_TRAILING_BLANKS     = SPACE
     WRITE_LF                  = 'X'
     COL_SELECT                = SPACE
     COL_SELECT_MASK           = SPACE
     DAT_MODE                  = SPACE
     CONFIRM_OVERWRITE         = SPACE
     NO_AUTH_CHECK             = SPACE
     CODEPAGE                  = SPACE
     IGNORE_CERR               = ABAP_TRUE
     REPLACEMENT               = '#'
     WRITE_BOM                 = SPACE
     TRUNC_TRAILING_BLANKS_EOL = 'X'
   IMPORTING
     FILELENGTH                =
    CHANGING
      data_tab                  = gt_xml
    EXCEPTIONS
      file_write_error          = 1
      no_batch                  = 2
      gui_refuse_filetransfer   = 3
      invalid_type              = 4
      no_authority              = 5
      unknown_error             = 6
      header_not_allowed        = 7
      separator_not_allowed     = 8
      filesize_not_allowed      = 9
      header_too_long           = 10
      dp_error_create           = 11
      dp_error_send             = 12
      dp_error_write            = 13
      unknown_dp_error          = 14
      access_denied             = 15
      dp_out_of_memory          = 16
      disk_full                 = 17
      dp_timeout                = 18
      file_not_found            = 19
      dataprovider_exception    = 20
      control_flush_error       = 21
      not_supported_by_gui      = 22
      error_no_gui              = 23
      OTHERS                    = 24.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
However, I like to mention that the file created from out ECC 5.0 (6.40, non-Unicode) contains a special character between the XML header and the data part (when displayed using NotePad Editor):
...xml version="1.0" encoding="utf-8"?>[special character]<asx:abap xmlns:asx="http://www.sap.com/a...
Using a HexEditor the special character (0x0A) is displayed as a dot.
Also Check with FM - TREX_TEXT_TO_UTF8
Reward Points if it is helpful
Thanks
Seshu

Rendering file formats problem (non-issue in premier)

hello all,
so i'm new to final cut and baffled at the unusual render issues i've encountered from the get go.
i recorded some video using the canon fs-10 / fs-20, a lowend digital camcorder.
the camera outputs the format to .mod which i then converted to .mpeg4.
without any editing in FC, a single clip needs to render just to view it in the canvas but plays ok in the viewer. does this make any sense?
i've even tried to convert to .mov and .avi.
when i used a different camera that automatically records in .mov, final cut plays back in the canvas just fine without rendering.
so,
1. what exactly determines when FC renders if not the file format?
2. why does it need to render at all if i'm just playing back? it plays back in the viewer but not the canvas. baffling.
would be a real shame if FC couldn't handle simple editing with these basic files.
thanks!

Just grabbing software, and throwing video files at it, without taking the time to read or learn HOW this said application works, isn't wise. FCP isn't Premiere...FCP doesn't just take in any old QT file and then work with it. No. It needs to be converted to a format that FCP works with. What you see in the EASY SETUP list is what FCP works with.
If you don't bother to learn the basics of the application, then things won't go smoothly. If you just want to grab QT files and throw them into an application to start editing, then use Premiere.
1. what exactly determines when FC renders if not the file format?
If it isn't in the Easy Setup list...FCP will want to render it. If you mix two or more codecs in a sequence, then FCP will render the footage that differs from the main footage you are editing with.
2. why does it need to render at all if i'm just playing back?
Because It is viewable in the Viewer...that's just a window to the QT file. But the canvas is where things are put together. And that is where settings are determined.
would be a real shame if FC couldn't handle simple editing with these basic files.
Basic files that aren't in editable codecs. At least ones that FCP (and Avid) work with. If you want an app that just works with stuff you throw at it, Premiere and Vegas are for you.
Shane

File format problem

hey i have a camcord and i can hook it up to my mac, but my problems are that the video files come up to ".mod" and i need ".mov" ".mpg" etc to edit them.
is there any movie program i can buy or use to convert, and i think i have seen IMovie 08 convert instantly when dragged into the program, but i'm not sure.
can anyone spread some light?

You have posted in the iMovie HD forum. Which version of iMovie are you using?
You can use MPEG Streamclip to convert footage to DV format, which is what iMovie HD (v5) and iMovie HD6 require. http://www.squared5.com/

Csv file format problem

prodorder;batchno   ;text1    ; text2; text3;text4;text5;
"100001012;0008339492;487-07-G1;22;6,86;000081022G; "
"100001013;0008339493;487-07-G1;22;6,86;000081022E;1 "
This is my sample csv file.
i want to upload using bdc.
im splitting the internal table and uploading like this.
call function 'GUI_UPLOAD'
    exporting
      FILENAME                      = FILE
     FILETYPE                      = 'ASC'
    has_field_separator           = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    tables
      DATA_TAB                      = ITAB
loop at ITAB.
    split ITAB at ';' into ITAB1-AUFNR
    ITAB1-CHARG
    ITAB1-TEXT1
    ITAB1-TEXT2
    ITAB1-TEXT3
    ITAB1-TEXT4
    ITAB1-TEXT5.
    append ITAB1.
endloop.
But finally im getting output as
"100001012 in ordernumber of co01 transaction.
it should display 100001012 in ordernumber field.
please suggest how we can rectify this problem.

Hi Vijay,
   I can sugest you one thing. Before splitting ITAB at " , " .
use REPLACE command to remove inverted code value ( " ) .
Eg Loop at Itab.
REPLCE ALL OCCURANCES OF " WITH SPACE ( Check syntax).
Hope this will solve your problem.
Regards
Sourabh

Quicktime and File Format Problems

I just got a new MacBook Pro and i have tried downloading the Quicktime for it but every time i do it says "Quicktime cannot be downloaded on this disk. The software is intended for an earlier version of Mac OS X" The thing is i downloaded the new Leopard software and looked at my "Macintosh" file and it says it has the 10.6 version. I dont understand what I'm doing wrong. And i have already made sure countless times that I am downloading the right version of the Quicktime. If you have any suggestions please let me know. Also when i take a picture on photobooth it wont let me upload it to MySpace or Facebook or anything. HELP!!!

The upload/PhotoBooth problem? Don't know, don't use it.
However, if you can explain what you are doing and what
is happening we may be able to work it out.
"it won't let me upload" doesn't really give any detail and it
is not possible to resolve problems without details.
Dave

IWeb 08 error message "The file format is invalid"

I have been reading all of the problems regarding publishing iweb pages at the moment, I too cannot publish my site but I get a different error message
"The file format is invalid"
Can anyone help as to why I might be getting this message?
My iDisk seems to have a very old version of my website stored and I don't know where to look to find the current versions files?
Why hasn't iDisk got the most up to date version of my iWeb site and how do I get it to have?
Which folder on the iDisk should your iWeb files be stored in?
Sorry to ask so many questions but I am new to the publishing part after spending weeks building a site only to find it I get an error and my iDisk file structure holds old files.

When I opened iWeb I could see the most up-to-date version of my site, I could edit it and save it (to where I don't know). When I opened the web and sites folder on my iDisk it contained only the files from a previous version of my website created months ago.
I tried looking for the Domain file for my iWeb site and looked in my home folder, application support and then iWeb but the iWeb file in App support was empty.
I believe the iWeb file in App support is where the Domain file should be located, correct?
I have used Time machine to go back a week and have located the domain file and have restored it. The domain file now sits in the iWeb folder in App support in my Home, where it should be.
Now when I load iWeb I see the version of my website that was created a week ago which is fine but iDisk still has the old file structure of my site from months ago.
Can I delete the old file structure completely from the Sites folder on my iDisk? this should remove the old version of my website shouldn't it?
How do I get the restored version of my website to appear in iDisk?
Do I simply copy the Domain file into the sites folder on iDisk?
My iWeb files on Mobile me are also the months old versions, how do I update these so my new site is all that I can see?
Any answers to my 'File format' problem when trying to upload, is it because I don't have my iWeb files in the correct places?

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

Problems emailing any other file format other than a .jpg

I am having problems emailing any other file format other than a .jpg in mac Mail in Leopard. Is anyone else having this problem?
I have tried PDF, .tif and .doc documents, and they are small files, less than 150 kb. I have checked to ownership on the images and it says that I can read and write to them. I have also checked with my ISP and my mailbox capacity is 10 MB and was recently emptied. I am able to log into my ISP's webmail portal and send these types of attachments through there successfully, which has made me convinced that it has to do with Leopard or Mac Mail because I did not have these problems in Tiger.
When I send a message like this, Mail says, "Sending" for a while, and then says "Cannot send message using server:(Name of my server) Sending the message content to the server failed. Select a different outgoing mail server."

I've been sending .doc files with/without also .jpg as attachments without problems so it is possibly not a Leopard problem. I know this doesn't solve your problem though. Someone else may be able to solve the problem.

I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3. I haven't come across Preview or this problem before. Any suggestions?

I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address. Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format. I haven't seen Preview, or had any problems, before now. Thanks for any suggestions.

Hi,
Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

MINISAP Inst. Problem. MBSDATA1.MDF File format not recognizable

Hello friends,
I am facing one problem. I have completely installed MINISAP successfully as per the instructions given in the installtion CD.
Now the system is not able to recognize the file format of the file MBSDATA1.MBS
This is the file that is used to start the MINISAP. Unless this file run, I cannot run MINISAP.
Please help. Points will be rewarded generously for the solution.
Regards,
Navin
Message was edited by:
Navin Guru

Hi
Check this link..
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Here are the link which will explain the procedure
http://www.sap-img.com/basis/sap-ides-installation-procedure-for-sap-install-on-w2k-server.htm
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Regards
Anji

File format problems

Similar Messages

Maybe you are looking for