File Free/File Total is off the Reservation (22M/83M Bytes Free)

When I look in Options/Status and click the menu button to check database sizes I see that "Content Store" is almost 3800 Bytes.  How can I see which programs specifically are eating up my memory ?
Solved!
Go to Solution.

You're in great shape!!!! I only have Google Maps, Jtetris, and Opera Mini installed and i'm at 23MB for my file free  )
Usually if you're free number is between 5-10MB you should be worried.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • Firefox is preventing some files from downloading off the internet

    Today I had to go to the Dell website to update some drivers for my laptop. Every time I downloaded the driver file from the site to the download manager and then clicked on it to run, I would get a message that there was no file to download. The tech from Dell then had me download Google Chrome and the downloads went smoothly without a hitch. Something in Firefox is preventing the Dell files from downloading. I need instruction on how to correct this problem. I am also wondering why when I go to download files using firefox I do not get an option to run the file instead of save it. II only get the option to save it and then have to click on it from the download manager to run it. I would like to change this as well if possible
    Thanks,
    Maria

    It is possible that you run into this maximum (the default value is 20):
    * http://kb.mozillazine.org/dom.popup_maximum
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How do I get photo title/file name/information off the Books I am creating?

    I dont want photo info under each pic in my book. I searched the discussion boards but could not find a solution

    You need to select a theme that does not include the meta data, e.g. the "Modern Lines" theme or "Picture Book".
    Or simply use the "Edit Layout" mode and delete the text boxes on the pages.
    Regards
    Léonie

  • Sub totals based off the value of a dimension

    Hi,
    I have a requirement to apply sub totals to a dimension at certain levels of a hierarchy.
    From what we've implemented, the typical Level-Based Hierarchy has been replaced by a Flat Hierarchy, so instead of accounts appearing at different levels and in different columns (I.E Level 31, Level 30, Level 29 ... ), they appear in 1 single column. A seperate column called Node Depth determines the level at which these accounts sit.
    Essentially, I just want to show sub totals for values 2 and 3 in the Node Depth column.
    Is there a way to do this in OBIEE? I've only been able to get ALL subtotals to appear.
    Thanks

    Hi Chris,
    You can either use the FILTER...USING... function in answers or you can create distinct, filtered LTSs in the RPD which will then represent your node depth. I.e. you'd have, in your example, 8 LTSs with differing fragmentation content of "Node Depth" = 1 ... = 8

  • Moving large itunes file ( 58 GB ) off system HD

    How to move a large itunes file ( 56 GB ) off the system startuo HD

    There are a lot of converters out there, now I don't know about free ones, but something called plain and simply "Audio Converter" is only $20, and it converts to .wma, .mp3, .wav, and several others, however, not .aac. I don't know if there's many that do handle .aac files whether converting to or from them. It has a 14?-day free trial. I usually convert to .wav, get a good music editing program called Music Editor (it was released as a side program with MAGIX Music Maker 7), to edit up the song to be just like a radio edit, then convert it to aac using iTunes, although I would maybe recommend converting them to mp3, seeing as how AAC is not supported by much other than iTunes.

  • How do I get my files and photos off my old computer

    I have an old Mac G4 and just got a new iMac. I have them both hooked up to my Bell Turbo Hub But they do not see each other so that I can transfer files and photos off the old computer. Help

    If you have a Thunderbolt to Firewire cable you vpcan start the G4 in target disk mode and connect it directly to your new iMac. http://support.apple.com/kb/ht1661
    Or you can connect them via either firewire/thunderbolt or ethernet and use Migration Assistant http://support.apple.com/kb/ht4889

  • Off the desktop?

    While reading an email, I decided to save an attachment by dragging it onto my desktop. The problem is, the email window was open which left only a sliver of my desktop visible. I dragged the icon of the attachment onto the part of the desktop that was there, but now I can't find the file. Is it possible that the file was saved off the desktop in an area that I can't see?
    Mahalo for your help!

    If you are using the Mail application to access your email, you can avoid this in the future by using the "save" feature next to the attachment in your email--then you can choose where you want to save it without needing to try to drag to the tiny little space around the email window.
    Maxit

  • QT file size off the chart

    i am exporting a basketball game that i have off a camera. the file is 13 gb already. i want it way smaller but still good quality to watch as a quicktime. when i export as 422 it bloats to 44 gb. if i use h264 it is small - under 1 gb, but very ugly. i have exported tons of video before and usually using 422 makes things smaller - not larger.
    DV, 720 × 480 (640 × 480), Millions
    16-bit Integer (Big Endian), Stereo, 48.000 kHz
    this is the native file info? any help?

    i am exporting a basketball game that i have off a camera. the file is 13 gb already.
    The file size is directly proportional to the total audio + video data rate.
    i want it way smaller but still good quality to watch as a quicktime.
    A "quicktime" movie is any QT or third-party data compression format in an MOV file container that is play on a system having properly configured QT component support. There a dozens of possibilities which can be combined in hundreds of possible ways with settings offering thousands of possibilities. Can you be more specific regarding your goals?
    if i use h264 it is small - under 1 gb, but very ugly.
    H.264 is a very efficient codec with a wide range of useable video data rates. Depending on your requirements for display dimensions, minimum quality acceptability, and/or maximum acceptable file size, there should be a data rate the will server your needs. Basically, SD H.264 video can be exported in the range of 1 to 18 Mbps depending on what your will settle for in terms of quality and file size for a particular display size. Quality is proportional to the data rate which is inversely proportional to the file size. What you need to to is find a happy medium between these three requirements.
    DV, 720 × 480 (640 × 480), Millions, 16-bit Integer (Big Endian), Stereo, 48.000 kHz... this is the native file info? any help?
    This looks like a video editor capture of camcorder content in standard definition. It likely has a total video data rate on the order of 28.5 Mbps (about 13 GBs per hour of content). Since your previous H.264 export indicates a combined total data rate on the order of 2.2 Mbps, you might try manually exporting the file limiting the video data rate to something in the 3 to 4 Mbps range and an AAC stereo audio track of 160 Kbps @ 48.0 KHz. This should improve quality and provide a target file one quarter to one third the size of your original "source" file. Since you did not provide any information regarding the aspect ratio, I cannot provide specific dimensions settings here. (I.e. if source was PAR 16:9, then you might target a 853x480 display size or 640x480 if in a 4:3 for smaller file size or 720x480 PAR encode for 640x480 playback if you want to force the video data to encode at a higher data rate. (I.e., H.264 video is adaptive depending on the content and settings used.)
    I think it is a file that was captured at a high def type setting - although it was not high def to begin with. thus the huge file.
    The original file on the camcorder may have been HD, but the captured file is SD and the file size of 13 GB is quite normal for an hour of content using the DV-25 codec. (DV-50 and DV-100 files would be double and quadruple this size.) This is simply a low efficiency (i.e., low compression format) which provides higher editing quality at the expense of file size.

  • I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

    Question
    I cannot set up page set prior to printing.
    I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
    These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
    When I go to Print Preview I get a totally gray screen

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • How do I turn off the requirement to enter my password everytime I want to delete a file in Finder?

    How do I turn off the requirement to enter my password everytime I delete a file in finder?

    Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
    1. Triple-click anywhere in the line below on this page to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder (or just Show Info)
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • When saving a file in Indesign the tab goes off the top of the page

    Having trouble with dragging the size of the artboard window and when I save a document the top of the tab goes off the page?

    Thank you for responding. Below is some info.
    Please see the clipping on the "d" in Pastel Bond and White Bond and the rounded part of the "R" in 2 &3 Part NCR. We have had this happen on occasion with other files as well. Thanks for the help.
    save as > photoshop PDF
    First dialogue box:
    Save: layers (checked)
    color: embed color profile: U.S. web coated (SWOP) ...
    Second dialogue box: high quality print
    options: none checked
    viewing PDF in preview on mac

  • My Mac got hacked. I was working on a word document when the computer suddenly started typing meaningful sentences on its own that describes how the hacker is skillful. At the that time I was on a password protected wifi and file sharing was off.

    This is the first time I get hacked this bad. I was working on a microsoft word document when the computer suddenly started typing meaningful sentences on its own that describes how skillfull the hacker is. At the that time I was on a friends wifi network that is password protected (not sure about the encyrption), the Os X Firewall was on. I was using the admin profile, however, file sharing was off. I'm very careful not to install any suspecious 3rd party software.
    So far I have verified permissions and fixed some errors there, and changed passwords.
    Do I have to erase/format my computer and reinstall the Os? If so is it adequte to use the internet recovery tool or will it use old and possibly infected EFI/Root files?
    Would appreciate the advice of all the Mac experts out there. Thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo launchctl getenv DYLD_INSERT_LIBRARIES; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; launchctl getenv DYLD_INSERT_LIBRARIES; echo; crontab -l 2> /dev/null; } | open -ef
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

    I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

    Nope, it either needs to be plugged in or turned on with the power button.
    A replacement iPhone 4 is $149, but at least the whole phone is replaced.

Maybe you are looking for

  • Why is this .vi slow ?

    I use this rather uncomplicated .vi for an one hour continuously monitoring displayed digitized signals thru the GPIB output of my Tektronix DSA 602 ( Digitizing Signal Analyzer, sampling up to 2 Gs/Sec ). If I tweak the Signal Analyzing Scope at its

  • How do I add an attachment to an email and not have it show up in the body of the email?

    How do I add an attachment to an email and not have it show up in the body of the email? 

  • Printer setting for Cheque

    Dear All, I am facing problem while doing Cheque Printing. or (document having definite length). Cheque printing is done on Epson printer. For Particular Cheque printing I created Page Format  Under "Dev. type"  SAPWIN     "Rel.4.x/SAPlpd 4.09+ ONLY!

  • Ubuntu CD showing up as Windows in alt boot screen

    Hi everyone, The problem began when I tried installing Windows 8 Release Preview using bootcamp assistant on my 2012 MacBook Pro 13. First, bootcamp assistant couldn't create a bootable USB stick; I tried it numerous times and it kept giving me the s

  • Parallels runs slowly for no apparent reason-Please Help

    Hey everybody. I'm running into an interesting situation when I'm running Parallels on my Core 2 Duo MBP. Basically, when parallels is running Windows XP, the whole computer is running very slowly. I have windows running on a second monitor, and I am