File has to pass through FTPS connection.. Connection parameters?

Hi,
I want to transfer the file through FTPS connection. Partner side provided the following details as connection parameters.
- IP : 129.32.169.140
- POrt: 990
User name
Password
PASV mode
SSL Direct, OpenSSL,SSL Listing, SSL Transfers.
Kindly let me know what are all the parameters I need to pass in Receiver file adapter.
FTP Connection Parameters:
Server
Port
Data connection: Passive
Connection Security: FTPS for control connection or FTPS for control and Data connection.???
Command Order : ?????
Please let me know what are the security and command order parameters I need to use in Receiver file adapter.
They didn't provide any certificates.
Thanks
Deepthi.

Hi Rajesh,
The message is not even failing.. It is in the status of "Delivering". The below are the logs from adapter and Messaging system.
File Adapter Log:
Success   Message successfully received by messaging system. Profile: XI URL: http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
Success Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
Success Message successfully put into the queue.
Success The message was successfully retrieved from the receive queue.
messaging system log:
Message ID 44b756da-d9bd-42e2-3136-e34d75adfe03
Message Type Asynchronously Received Message (RECEIVE)
From Service   Name: BS_1
To Service   Name: BS2
Action   Namespace http://XI.com/SAP_PI/ControlData Name: BYPASS
Connection Name   File_http://sap.com/xi/XI/System
Status   Delivering
Error Category
Error Code
Profile   XI
Transport   HTTP
Delivery Semantics   Exactly Once
Times Failed   0
Number of Retries   3
Sent / Received 09/09/2009 11:22:52
Transmitted / Delivered 09/09/2009 11:22:53
Next Delivery 09/09/2009 11:22:53
Persist Until 10/09/2009 11:22:52
Valid Until 01/01/1970 10:00:00
Retry Interval   5 Minutes
Address   http://xi-dev.intranet.XI.com.au:50200/MessagingSystem/receive/AFW/XI
Transport Headers   authorization=Basic UElJU1VTRVI6dDFhbTRyaWE= Content-Length=3010 accept-encoding=gzip sap-xi-messageid=44B756DAD9BD42E23136E34D75ADFE03 content-length=3024 host=xi-dev.intranet.XI.com.au:50200 user-agent=SAP Web Application Server (1.0;700) content-type=multipart/related;boundary=SAP_4AA4E14330050131E10080000A722149_END;type="text/xml";start="" HTTP=POST soapaction="http://sap.com/xi/XI/Message/30"
Principal Propagation

Similar Messages

Maintain Server parameters to allow huge file size to pass through XI

Hello SAP Gurus,
i would like to know how can i check this Server parameters in SAP PI Configuration :
u2022 UME Parameters : To look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022 Tuning Parameters: To look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022 ICM Parameters: To consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
This is required for allowing huge file size to pass through XI.
Regards,
Ravi

Hi Michael,
I did the settings you just mentioned in the link.
I got through the First step where the file got processed and 50000 record data got divided into on 50000 idocs.
But when its is posting this in BW system, then the outbound status of the message is " Message has error status on outbound side"
And when i see BW there are no idocs in that system. Is it that the RFC connection between XI and BW had timed out and so it did not got processed at outbound side. Or there is some other setting required ?
Also, when we tried it with 20 K file then the outbound status is also successful.
Please let me know how to resolve this issue .
Regards,
Ravi

Flat-file and the pass-through pipeline

Hi there,
I have a technical questions about the inner workings of BizTalk.
The MSDN says that BizTalk is XML-centric and enything that is going through it and is posted to the MsgBox is converted to XML format.
The question: Is this also true in a scenario including flat-file and a pass-through pipeline ?
Lets say the flat file needs not to be translated, the external organisation will except the flat-file format we are receiving on the receive port. So we use the receive location with the pass-thrugh pipeline (a pipilene without any components in it) and
a send port with a simple filter pointed to the ReceivePort name. No need to convert the file to XML whatsoever, and it would be a waist of time and resources IMHO.
So the question is, will BizTalk (being XML-centric) do the translation anyway ? In what format is the received file being posted and stored in the MsgBoxDb ?
Thanks in advance.
Peter

In a pass-through scenario (with pass-through pipelines) BizTalk will not process the message payload.
More information here: http://msdn.microsoft.com/en-us/library/aa561008.aspx
The pass-through receive pipeline has no components. It is used for simple pass-through scenarios when no message payload processing is necessary. This pipeline is generally used when the source and the destination of the message are known, and the message
requires no validation, encoding, or disassembling. This pipeline is commonly used in conjunction with the pass-through send pipeline.
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Encoding Dolby Digital 5.1 (AC3) sound in MP4 files using AC3 pass-through

Looking for an application that will encode Dolby Digital 5.1 (AC3) sound in an .mp4 container using AC3 pass-through for playing videos with surround sound on ATV.
Handbrake is out of the question because I run Tiger. The Tiger version cannot do AC3 pass-through.
Visual Hub is no longer available.
Any other options?

You may need Apple's MPEG2 QT plugin as well for MPEGStreamclip.
Also, consider if running windows in parallels/Boot Camp etc that there's a windows version, and possibly a linux version.
VisualHub code was released open source - Google FilRedux and PunyVid (iSquint derivative). Not tried either though.

Communication with the Idoc file with is server through FTP (TCP/IP)

Hi All,
My file which is stored in the directory of the SAP server.
In this file Sales order data is stored in the IDOC format.
I have to devlelop a interface which which communicate with Server (where IDOC file is stored) with FTP using TCP/IP.
Is there any sample code is there.
Thanks in advance .
Point guranted .

Hi,
Check this links out
Using of FTP_CONNECT
FTP_CONNECT
FTP_CONNECT
Regards,
Samson Rodrigues.

HDMI pass-through no picture

I wonder if anyone could please help. I have just bought AppleTV and am trying to use it with my old Samsung DLP (with no HDMI but DVI) and a Denon AVR 789 (witch has HDMI pass-through) . When I connect the AppleTV through the receiver (using a HDMI lead to HDMI, them HDMI to DVI) I get no picture. When I go directly from the AppleTV to the TV using HDMI to DVI it works fine. I have tried changing the cables and also when I connect my FIOS TV box through the receiver it works fine. Also my AppleTV software is up to date Could this be something to do with HDCP ?
I would be grateful of any help

Yes it could be HDCP.
Generally, I would look at the source device (tv) as the root of the problem in that it doesn't handle HDCP hopping properly, however the tv works with other receivers so I have to have my doubts about where blame lies for these problems.
You could try powering up the devices in a different order, say from the delivery end first.
It could be however that you simply don't have the receiver set correctly and need to match up the inputs and outputs.

Pdf/zip arrive damaged through ftp

I'm using FTP to send our pdf files to our printers. I'm using Filezilla on a Mac. The printing office use pc's to download the pdf files. A lot of time the pdf files arrive damaged and can't be opened. I though to fix this by zipping all pdf files into one zip file and sending that through FTP instead. But this morning the zip file arrived damaged anyway. It doesn't happen all the time, but often.
What is causing these damaged pdf files when sending them from a mac to a pc with FTP? And why didn't it help by sending a zip file instead and did that one get damaged too?

I already thought of that and set transfer to binary in Filezilla for Mac. But pdf files or zipped files still arrive corrupted in some way at the pc end. I checked it by uploading a zip file and immediately downloading it back. The original zip file could be opened but the uploaded/downloaded one couldn't. The only different thing I can think of is the way I'm connected. Our company firewall doesn't normally allow connection to ftp sites other than our own departments. Filezilla seems to get through, but by a detour. For the ftp address I fill in our own proxy server and for username I use 'username @ ftp.externalsite.nl'. So where server would be ftp.externalsite.nl and the username would be 'username', I let it go through our proxy as servername. This way I can get a connection. Could it be that going through our proxy first, the firewall does something with the file first (scanning, processing etc.) before actually sending it further to ftp.externalsite.nl?

OVM support for NPIV and pass through disks

Hi Gurus,
I have a couple of questions -
1) Does OVM support NPIV?
2) Does mapping the physical disks via the phy: definition in the vm.cfg file equivalent of pass through disks to the guest OS?.
thanks!
Gak

avasek wrote:
Thanks!. The pass through question was actually in context of usage with snap* products from netapp as they work with VMware. All the snap* work with RDM's in VM's (pass through's), so i was wondering if the snap* could be made to work with the phy: def to the VM's as well. The RDM def should be equivalent of the phy: def ..right?. So ideally, they ought to work?No idea, to be honest -- I haven't worked with NetApp gear yet. You're probably better off checking with NetApp directly as well.

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

WAAS pass-through connections

I gather that a connection through a WAE can be in pass-through for one of 3 reasons :
- the remote WAE is not detected through the 3 way TCP handshake (conn type 'PT No Peer'
- the connection already exists (conn type 'PT In Progress')
- the connection is set to pass-through as it has hit a policy which puts it in pass-through mode (conn type ??)
In the output of the 'show tfo conn list' command, what is the 'Conn Type' for a connection that is being passed through because of a pass through policy ?
Thanks
Nigel

Nigel,
The potential pass-through reasons are:
PT App Cfg
PT Dst Cfg
PT_Glb Cfg
PT Overload
PT In Progress
PT PE Int Error
PT Dyn Bypass
PT No Peer
PT Rjct Capabilities
PT Rjct Resources
PT Asym Client
PT Asym Server
PT Intermediate
PT FB Int Error
PT AD Int Error
PT App Override
PT Server Blacklist
Regards,
Zach

My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.

File selection sequence in the FTP connection for File Sender Adapter

Hi,
I have a file to Proxy scenario using FTP connection parameters.
If there are multiple files in the sender folder, XI picks up the files randomly with no processing sequence.
I want XI to pick up the files based on the date time stamp meaning the oldest file created in the folder should be processes first and rest all in sequence there after.
I know processing sequence can be set for NFS connection but not for FTP .
Please suggest if there's any way to make this work.
Thanks in advance.
Thanks and Regards,
Amit Bhagwat.
Edited by: Amit Bhagwat on Nov 4, 2009 5:17 AM

Hi
For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order
If you want the file to be processed in sequence then you can use Quality of Service EOIO in the sender adapter.
The files are processed in the sequence they are picked up.
otherwise use BPM for File Sequencing..
Refer the following Threads
FTP Sender Adapter - Processing Sequence
Processing Sequence issue of FTP protocol
Regards
Abhijit
Edited by: Abhijit Bolakhe on Nov 4, 2009 10:32 AM

Word 2008 A file error has occurred. Check your network connections . . .

Word 2008 12.1.2 throws an error dialog when trying to save a docx file:
"A file error has occurred. Check your network connections or make sure the disc is properly inserted and not defective (nameoffile.docx)"
Newsgroups recommend to trash the Normal.dotm and let Word re-create that template but that doesn't solve the problem.
Newgroups also recommend specifying the file location of User Templates. That's doesn't help either.
A new file, however, does not appear to be a problem after following these suggestions. So there may be something wrong with my file.
I suspect it has something to do with the gutter and mirror margins because when these features are manipulated, Word 2008 inserts an extra "section next page" that I am not happy with, and the page numbering and sometimes section numbering gets thrown off.
Actually, I don't care WHY it's happening. I just want to know HOW to avoid this error. I cannot save changes to an important docx file anymore.
My work around: "Save as" to doc format and continue working!
However, I would prefer to keep working in docx format because Word bloats doc files incessantly, but docx seems to keep file size in check.

that was only a temporary fix. It didn't work well for long. Back to problems with both doc and docx versions of the same file.
Are there any other general swathes I can make, e.g. repair permissions (been there, done that)? I have trashed Normal.dotm, the 2008 preference files and repaired permissions.
docx files throw the error dialog, doc files crash Word on a regular basis.
Any more ideas?

RV042G cannot support more than 2-3 IPSec Pass through connections

Hi,
I'm trying to figure out what the max number of IPSec VPN pass through connections the RV042G can handle. We bought an RV042G router to replace our old RV042 box which was running into connection limitations. There are approximately 15 people in the office and anywhere from 5-8 of them need to vpn to a single client site. There seems to be an issue with UPNP where it creates the proper port forwarding but doesn't associate it with an internal IP address. Giving each workstation a static internal IP doesn't solve this issue. The remote site we are connecting to does have NAT-T turned on. What ends up happening is that after a while, users cannot vpn. Sometimes it happens with fewer than three users. Clearing the UPNP and rebooting the router helps but eventually if you connect and disconnect, a few times, you're hosed. The UPNP doesn't release the setting it makes in a timely fashion. Is there any way to fix this besides turning off UPNP which we need for other software to work?

Lenovo support (for me in Canada at least) is based in Atlanta, so I'm surprised you found a tech with bad English...
Your problems sound like windows problems, not hardware problems -- are you running XP or Windows7? If you google based on your OS, there are threads to be found on slowing down the start menu behaviors.

Entire days of pictures are not loaded on iCloud, while most of the days are loaded. Weeks has passed, while I was connected to wireless, so I dont understand why still emtire days are missing...

Entire days of pictures are not loaded on iCloud, while most of the days are loaded. Weeks has passed, while I was connected to wireless, so I dont understand why still entire days are missing...

I noticed an entire series of its always sunny in philadelphia is missing from my apple tv "purchased" section where i can stream it directly from itunes...I just purchased the new season and not showing at all

File has to pass through FTPS connection.. Connection parameters?

Similar Messages

Maybe you are looking for