FILE-IDOC, no message no IDOC

Hi experts..
iam working in FILE-IDOC scenario. when the scenario is excuted , the file is picking and archiving in the given directory. but when i check in SXMB_MONI the message is not cretaed and finally the the IDOC is
not created in destination system.
i cheked in RWB --adapter monitaring --the adapetr in sucess status.
please tell me what could be the reason?
Regards
vasavir.

Hii
Place a file in the specified source location.
once the scenario is configured correctly then the adapter picks the file based on the time specified in the pollinterval and process the file.and based on IDX1 IDX2 settings the file is posted to SAP R3.and in R3 check the idoc in WE05 or WE02.
there you can find the status of the idoc.
these links will help u for checking ur scenario and error handling :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Error handling in File ---IDOC Scenario
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
Regards

Similar Messages

IDOC send message to third party system

Hi,
I got the below scenario,
1) Data came from 3rd party system through EDI
2) Because the material is not there in SAP system it didn't create sales order
3) IDOC is errored out
4) How to inform the 3rd party system through an IDOC or message that IDOC got errored out?
Thanks
anikaushi

so you mean to say that we can trigger workflow sothat those people or email.
Yes, for error handling and resolution
Can we send the eror message to 3rd party in the form of IDOC immediately afer error IDOC is created in SAP?
You could, but I don't see the point and you'd have to map it. Your EDI system should provide an FA back to the sender upon receipt so that it knows the message was received. The error should go to the person or group that would handle the issue if it's an SAP-related issue such as a master data or config error. I don't know your system/setup, but it doesn't make sense to send a material error back to the sender system if someone is going to fix that in SAP and then re-process the IDOC (and trigger an order confirmation).

Remove Idoc Status Message

Hi,
Is there any way we could remove the IDoc status message after IDoc posted successfully? I have created the customized idoc status and want to remove the standard message since it is overlapping message.
Any helps is very much appreciated.
Thanks.
regards,
Faread

Hi,
IDOC systat01 can be used to change
the IDOC status very easily
(you put the idoc number and new idoc status basically)
http://help.sap.com/saphelp_46c/helpdata/EN/75/4b3c1cd14811d289810000e8216438/content.htm
REgards,
Vasanth

N IDoc s message to one txt file

I have finished IDoc to file scenarios.
If I send n IDocs , there will be n txt files.
Can I just get a TXT file, with one line with one IDoc?
Thanks.

hi
Another idea for collecting IDocs consists in using standard functionality of the IDoc. Instead of sending the IDoc directly to the XI via the IDoc adapter, you can download the IDocs gathered in a file with XML format. This file can now be uploaded by the sender file adapter. As the XML structure is the same as the IDoc adapter produces, there is no change of the behaviour of the message, besides there no single IDoc inside, but multiple IDocs instead.
1)As first step you go to WE21 and create an XML file port in the application system. Apply here a function module for creating the file name. You can use a standard module or a self-written module.
2)Schedule report RSEOUT00 with a variant where you assign the IDoc type, the xml port and the number of IDocs which shall be collected.
3)The report collects all IDocs in one file, until the "Maximal number of IDoc" is reached. When you have for example 2400 IDocs and you set "Maximal number of IDoc" to 1000, you receive 3 files, two with 1000 IDocs and one with 400. Inside the file there is one IDoc tag for each IDoc.
Do not gather too many IDocs into one file. The file size should be considered carefully. Too large files might cause memory leaks, when your hardware is not sufficient.
The files can be uploaded by the sender file adapter. When you collect IDocs of the same type, the Mapping can be done the same way as for IDocs processed by the IDoc adapter.
check the blog
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

IDOC Response Message

Hi,
My scenario is File to IDOC .. from the source I'm getting the data in a xml file and I'm loading it to SAP through IDOC.. scenario is working fine... but I want to send back the response message of IDOC posted successfully or if any Errors.
from the XI point i know that through BPM we can achive this.. but in the SAP-R/3 side how can we send the Response message.. is it need to use any other IDOC for capturing these messages and send it back to the XI system or any other options please suggest me..
I wnat to send back the IDOC status messages (Success or Failure ) . please suggest me .
Regards
Jain

hi,
you have to just configure ale audit at the receiver side and a idoc adapter in XI.
this link will be helpful:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
regards,
ujjwal kumar

How to convert IDoc-XML to native Idoc-File with in SAP XI/PI

Hello,
I have a problem to Create an native IDoc-Format for an File-Receiver.
The scenario:
I get an Idoc (ZMATMAS) from a SAP System to an MATMAS-exchange-scenario. One of the non-SAP-receiver-systems needs an other native IDoc-Format as File. So I have to map the ZMATMAS to the receiver Format and write this as File. The problem is, that this file contains the data as IDoc-XML and not as native IDoc-format.
Has anybody an idea for this problem?

U need to use sender idoc adapter and file receiver adapter.
U can do file content conversion at receiver end.
Content Conversion is basically to convert a text file that contains complex structures into an XML source format and vice versa. It is present only in the File Adapter because it is one of the message protocol which will convert the structure to a desired format.
There are many blogs for File Content Conversion. Some of them are listed hereunder:-
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
You may also check the FCC documentation for Sender and Receiver:-
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

IDOC status "Message scheduled on outbound side"

Hi,
I am working on scenario file->XI->SAP R/3(Using IDOC). I am getting outbound status of IDOC as "Message Scheduled on Outbound side". When I go and see SM58 for user WF-BATCH there exists a entry with status Transcation Recorded". In SM58 if I manually click Execute LUW then only I am getting an IDOC posted in my R/3 box, but this should happen automatically.
Can any one tell me what should I do so that it gets executed automatically?
Thanks In Advance.
Yaseen Mahammad.

Most of the time it is because of the Queues and Logical system. I,e If there is no proper logical systems are created/maintained then it will give problem.
And it also depends on the rfc Dialog users.
Just check this thread-
Problem with IDOCS
Also check in the IDX1 entry...
Thanks,
Moorthy

Inbound Processing of iDoc Status Message

Silly me - I thought this would be simple ...
I am currently changing our bank interface from a customized ABAP solution to use more standard SAP utilities (particularly iDocs). I have the configuration set up to use the PAYEXT message type sending PEXR2002 iDocs to a file port. Our bank is receiving these documents and is returning an iDoc status message containing the status of each payment iDoc that they received from us.
My problem is that I can't figure out how to get these status iDocs to update the status of the corresponding PEXR2002 iDoc.
I am trying to execute an RFC interface to apply these status messages to my system using the following OS command:
D:\usr\sap\VPR\SYS\exe\uc\NTAMD64\startrfc.exe -3 -d RT2 -u xxxxxx -p xxxxxx -c 220 -h SPR32K36 -s 00 -F EDI_STATUS_INCOMING -E PORT=ZFI_INT003
The error message that I receive when this is run is:
RFC Call/Exception: SYSTEM_FAILURE
Group             Error Group 104
Key                RFC_ERROR_SYSTEM_FAILURE
Message        Status record 1 is invalid (TABNAM: 'EDI_DC40')
The port (ZFI_INT003) is the file port that is configured for the outbound file. in WE20, this port has the "Status File" tab set to use the logical file name where the status file is being stored on the server. the startrfc command is connecting to the SAP system and opening the status file. I'm not sure where I'm going wrong here.
Can someone please help get me pointed in the right direction? I've obviously missed something here.
Thanks,
Glen

Hi,
call function modules:
EDI_DOCUMENT_OPEN_FOR_PROCESS
   EDI_DOCUMENT_STATUS_SET
   EDI_DOCUMENT_CLOSE_PROCESS
kind regards,
HP

RFC error "No authorization to send IDOCs with message type ..."

Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
Liesel

Hi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas

IDOC in Message mapping

Hi folks,
I am working on file to idoc scenario. I Imported the IDOC to my scenario. In Messaga Mapping IDOC structure displaying fields as a documention. but i need techincal names of those fields.
for Example: In my IDOC 1 field is showing companycode but I want to see that field as a BUKRS.
How to see the technical names of IDOC fields in Message Mapping.
Your help is highly appreciated.
Thanks,
Anitha.

Hi bavesh...
thank you so much for very your quick responses..
i got xsd as source..based on xsd i created external definition for source xsd and i created outbound interface based on source external deifinition MI_OUT_WearUnits.
and i imported Idoc and exported as xsd and changed occurance to unbounded and again imported as external definition.
i did mapping between these two external definitions.
and i selected standard idoc for source and target interface for interface mapping and given message mapping of previous step.
In ID
sender agreement :
 sender service :BS_external
 sender interface :MI_OUT_WearUnits
receiver agreement:
 receiver service :R/3
 receiver interface : standard Idoc
Interface determination:
sender service :BS_external
sender interface :MI_OUT_WearUnits
reciever service :R/3
and clicked create
inbound interface : Standard IDOc
i am not getting Interface mapping which i created in IR.
i tried Enhance interface determination also..
please guide me....
waiting for your help.
regards
ram

Error : No authorization to send IDocs with message type MATMAS

Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.

You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
 Field name RFC_TYPE value FUGR
 Field name RFC_NAME value EDIMEXT, SDTX
 Field name ACTVT value 16
Authorization object S_IDOCDEFT
 Field name ACTVT value 03
 Field name EDI_CIM value ' '
 Field name EDI_DOC value TXTRAW01
 Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
 Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
 Field name ACTVT value 03
 Field name DICBERCLS value
from the note mentioned above.
Regards
Bhavesh

Nhi guru's cross apps what is basic type,idoc type , message type

nhi guru's cross apps what is basic type,idoc type , message type plz help me i am larning how to work on idocs using ale explain me like realtime environment

Hi,
Hi,
i got this data from sdn .plz go thru might be helpful
IDOC is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
how to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
For creating a IDOC u need to Create a segment type in WE31.The internal table in which we store the data to be passed to the IDOc thos fielda are defined in fieldname and data element.Save and release the segment.
Create IDOC type in WE30. Give min and max types. Mark it as mandatory.
Create Message type in WE81.Assign it to a change request and save it.
Link this message type with IDOC type in WE82.
Then start your coding and pass the details of Data and control records.
Just have a look at these links:
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
Creation of IDOC:
idoc creation
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=creation%20of%20idoc&cat=sdn_all&start=11
ALE/ IDOChttp://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
i think this will helps u
reward is usefull

Issue: "No Authorization to send Idocs with message type Orders" - IDX5

Hi All,
I am working on a File to IDoc(Orders.Orders05) scenario. The sender is PI Server and the receiver is the SAP ISR system. A technical system has been created in PI SLD for the ISR system and a Business system is added to that. The logical system created in ISR system using Tcode BD54 is added to the business system in PI. A new RFC destination is created in PI system to connect to the ISR system.
On the ISR system Partner profile is created using TCode we20 with the same logical system name already created using Tcode BD54.
When sxi_monitor is executed on the PI system, It shows checked flag on the Inbound side and Red flag on the Outbound side. And when idx5 is executed, it shows the new Idoc number and when it is double clicked, it shows the Status Text as
"No Authorization to send IDocs with message type Orders".
All authorizations have been provided on the Sender side.
Please let me know if any authorization need to be provided on the ISR system or Is this an error on any settings.
Thanks in Advance.
Stalin S.

Hi,
Check this Thread which deals with the Authorization Issue
RFC Adapter
And also check this how to check whether u have sufficient authorization to send the Idocs or not
To test the Authorization check
Double click the RFC Destination that u have created in XI towards R/3 in SM59
Select UtilitiesTestAuthorization test
By this you can come to know whether your user is having the propper authorization or not
REgards
Seshagiri

How to convert Flat file(.txt) data to an Idoc format(ORDERS05)

Hi,
How to convert Flat file(.txt) data to an Idoc format(ORDERS05). If any FM does the same work please let me know.
thanks in advance,
Chand
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jul 26, 2011 11:11 AM

Hi,
For more information, please check this link.
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Have a look at the FM IDOC_XML_FROM_FILE. May be it helps...
Regards

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

FILE-IDOC, no message no IDOC

Similar Messages

Maybe you are looking for