File Import Error for mpeg-1?

When attempting to add mpeg1 files to render queue, AME 5.0.1.0 displays a messagebox "File Import Error" "Error while decompressing the source file".
These mpeg1s are direct from my Sony DSC-N2 point-&-shoot. GSpot identifies them as mpeg1 video codec & 32khz,64kbs,mono layer2 audio. VirtualDub has no problem with these files.
Any ideas? I'd upload them here but as uncompressed mpeg1s they're 41 & 19MB.

Hi Peter,
Thanks for posting the clip. I tested it and was able to reproduce your results. In Adobe Media Encoder 5.0.1, installed as part of CS5 Design Premium on Windows 7 64-bit with QuickTime 7.6.9, encoding the file to F4V (or FLV or H.264) was very very slow. It looks like AME is duplicating every frame many times over, which was confirmed when I stopped the encode and examined the partial file.
The problem did not occur, however, on a similar computer with CS5 Production Premium installed.
The reason, if I understand the inner workings of AME well (which I like to think that I do), has to do with which codecs are installed with AME, which is dependent on which Adobe products you have installed. Only Production Premium, After Effects, and Premiere Pro include the MPEG codecs necessary for AME to decode MPEG files natively. Design Premium, Flash, or any other Adobe product that installs AME do not install the MPEG codecs.
In theory, AME shouldn't be able to read your MPEG file at all. But when QuickTime is installed AME has a rule that allows it to ask QuickTime if it can decode certain types of files if AME can't decode them natively. In this case, yes, QuickTime can read this MPEG file. So it's actually QuickTime that is decoding the file for AME, and then AME takes those frames and encodes them to the output format. If you didn't have QuickTime installed, AME would just produce an error when you tried to open the file. (I confirmed this by uninstalling QuickTime; this is also why your previous bad QuickTime install was generating the error you first posted about.)
The problem here seems to be that QuickTime and AME aren't talking together very well. Either AME isn't requesting the frames correctly, or QuickTime isn't handing over the frames correctly.
The best workaround for you will be to use a different program to transcode your MPEG files to a different format. Either directly to F4V, or to an intermediate format (QuickTime, AVI, other) that you can then import into AME so it can properly transcode it.
Or you can take Jim's suggestion and shoot with a camera that produces files that are more friendly to editing. MPEG files are notoriously difficult to decode efficiently for editing, and the wide variety of implementations of the MPEG guidelines makes it nearly impossible for editing programs to be compatible with every single device that can write MPEG files.
I do have some good news: this problem has already been resolved for a future release of AME; my test of an internal build did not reproduce the problem.
-=TimK
-=Adobe After Effects and Adobe Media Encoder QE

Similar Messages

File Import Error - Adobe Media Encoder, help!

I'm at a complete loss. AME worked very well for me for a long time and booting it up yesterday gave me a paralyzing error.
Upon trying to import an MOV, MP4, and later a WMV, I received the following error:
File Import Error
The file C:\Users\tj\Desktop\New folder\SH_GS_PeekPlay_DEMO_720.mp4 could not be imported. Could not open source file. Please check that file exists with correct permissions.
I've tried everything I can think of:
1. Moved the file off the server and onto my desktop.
2. Double checked file permissions (all of which I have)
3. Uninstalled AE and Premiere to try to get rid of Media Encoder.
4. Searched for a way to uninstall AME so I could put a fresh install (can't find how to do this)
5. Manually updated AME
6. Reboot (multiple times between these steps)
7. Contact customer support - no help thus far.
I'm running Windows 7 64bit with Adobe CC and AME 7.0.1.58

Tried that as well.
To rule everything out, I had the files placed:
1. On company internal server
2. External Harddrive connected through Firewire
3. Internal Hard Drive (with OS)
4. Internal secondary Hard Drive (data only)
5. On Desktop (technically 1st internal drive)
I have since fixed this by uninstalling every single Adobe application (including Flash and Air) and redownloading and installing each.

CS6 File Import Error

MAC PRO 2 x 2.93 GHz 6 Core
12 GB 1333 MJZ DDR3 Ram
Kona 3 card
Quadro 4000 graphics card
Video drive Apple XServe raid
plus 2 TB G-raid & 3, 2 TB internal 7200 RPM drives
OS 10.7.4
CS6.0.1.31
I have run into this "File Import Error" several times since installing the PP update and the new AJA drivers for CS6.
The message tells me that the file is an unsupported format or that it's damaged. These files will open if I keep trying and they'll also open in QT player and in After Effects and eventually in PP.
Also when I open an existing project I consistently get a dialogue box:
"The scratch disks are write protected or unavailable. To open this project, the scratch disks will be set to your documents folder. Would you like to continue?
second dialogue appears
"The project could not be loaded. It may be damaged or contain outdated elements.
Then another:
"Video filter missing
AE_A7D2C2A2-6AB7-4551-84A6-45830F6ADF3C"
If I try the project a coupl.e of times it will usually open, showing the first and third dialogue box, but not the second saying that it is damaged.
Of course none of the scrazttch disks are locked.
Problem #3
All day yesterday could not render any clips or timeline. Today I repaired permissions and seem to now be ble to render.
Problem #4
Sent the unrendered timeline to Media encoder, hoping the Media Encoder would be able to render and it just locked up with no encode.
I deleted the files and now Media encoder seems to be working.
Something very Hinkey going on. Anyone have any ideas or solutions to prevent this from happening in the future.
Thanks...Jim Watt

Problem 1: What sort of file(s) are you trying to import when you get the error?
Problem 2: Was the previous scartch disk setting pointing to a drive that is not available on your current system? If so, open the project then change the scratch disk manually to whiver drive/directory you want... Or just accept the default.
Problem 3: Glad that worked... doesn't that negate probelm 4?
Problem 4: Timeline rendering and rendering at export are two different things. They are not directly related, so an export will not render the timelien for you. You did the right thing by deleteing your existing preview files. That's always a good thing to do after upgrading old projects to current versions. Plus, it saves a lot of storage space if you do that whenever you're 'done' with a project.

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Lightroom 4 and 4.1beta video file import error/failure

Findin that Lightroom 4 and 4.1 are not importing video/movie files. Without exception every attempt made has resulted in an error.
In many cases just the first frame gets imported and converted to a low grade jpg image.
The same files import cleanly in to Aperture 3.x without difficulty.
Software glitch? Or my brain cramp?

i too have a mpg file hat will not import in 4.1 RC.
i think it should import fine?!
Format                           : MPEG-PS
File size                        : 605 MiB
Duration                         : 4min 25s
Overall bit rate                 : 19,1 Mbps
Video
ID                               : 224 (0xE0)
Format                           : MPEG Video
Format version                   : Version 2
Format profile                   : Main@High 1440
Format settings, BVOP            : Ja
Format settings, Matrix          : üblich
Format settings, GOP             : M=3, N=12
Duration                         : 4min 25s
Bit rate mode                    : variabel
Bit rate                         : 18,5 Mbps
Width                            : 1 280 Pixel
Height                           : 720 Pixel
Display aspect ratio             : 16:9
Frame rate                       : 24,000 FPS
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : progressiv
Bits/(Pixel*Frame)               : 0.836
Stream size                      : 581 MiB (96%)
Audio
ID                               : 192 (0xC0)
Format                           : MPEG Audio
Format version                   : Version 1
Format profile                   : Layer 2
Duration                         : 4min 25s
Bit rate mode                    : konstant
Bit rate                         : 384 Kbps
Channel(s)                       : 2 Kanäle
Sampling rate                    : 48,0 KHz
Video delay                      : -83ms
Stream size                      : 12,1 MiB (2%)

HANA STUDIO SPS06: IMPORT ERROR FOR A SCHEMA

Hi HANA Experts,
I have a problem for exporting and importing data for a schema.
For exporting I used interface of HANA Studio SPS06 , while importing I used command
IMPORT "SFLIGHT" ."*" AS BINARY from "/tmp/SFLIGHT" WITH RENAME SCHEMA "SFLIGHT" TO "SHANA"
I am getting the error as
SAP DBTech JDBC:[2048]:column store error: table import failed: [30134] out of memory
Kindly suggest. Thank you
Regards

PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
Happy authoring,
Hunt

File format error for xml file

Hi!
We are trying to upgrade our SAP 4.6C to EHP4.
While "configuration roadmapstep", system asks us the XML file we have
produced via solman. When we enter the path of the file system gives theerror below:
The selected configuration file
("E:\downloadupg\SMSDXML_FKQ_20100917142727.656.xml") is not useable.
Reason: "File format error"
We have tried the txt file instead of xml file. The result was same.
You can find the details of our system.
4.6D EX2 32 bit kernel
windows 2003 64 bit OS
sql 2005 64 bit database software
We have to upgrade our system until that monday.
Please help us as soon as possible.
Best regards
Noyan Durna

Hello Noyan,
first, the official information: please refer to note #1022704 - for source release 4.6, the TXT file has to be used instead of the XML file. Otherwise, 'File format error' will occur as in your case.
But since you tried this option, you should turn your attention to the XML itself, which must contains entries that are not handled by function module OCS_GET_UPG_STACK_INFO in the 4.XX source systems. The function module only expects the entries [SPAM_CVERS], [PRDVERS] and [SWFEATURE]. Any other entries present on the file can cause an error.
Please check your file for other entries like [APP_SYSTEM], [SWFEATUREINC], [TECHUSAGES], [INITIAL_CVERS], [EXPORT_CVERS], and [DVD_SET]; this might be the cause of the error.
In order to workaround this, you can either edit the file and remove the invalid entries or recreate it (w/o this entries also).
Best regards,
Tomas Black

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

Source file read error for sqldeveloper

While downloading SQLDeveloper, after almost 70%complete, i got an source file read error.
i've tried again to download but the page hangs on the license agreement page after clicking I ACCEPT.
Please resolve this issue.
Thanks in Advance
Using:
MS Win XP Home
Firefox 1.5.3
Tony Garabedian

sybrand_b wrote:
Why are you assuming utl_file works with binary files? It doesn't!It does in 10g, where file open mode B was introduced. But even with R mode you should be able to open DOC file. You might (or might not) have problem reading it:
SQL> declare
2      fh UTL_FILE.FILE_TYPE;
3      input_buffer varchar2(4000);
4 begin
5      fh := UTL_FILE.FOPEN('TEMP','Stats.doc','r');
6      UTL_FILE.GET_LINE(fh,input_buffer,4000);
7      DBMS_OUTPUT.PUT_LINE(input_buffer);
8      UTL_FILE.FCLOSE(fh);
9    exception
10      when others then UTL_FILE.FCLOSE(fh);
11 end;
12 /
ÐÏà¡±á                > þÿ                 2          4      þÿÿÿ    1
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿì¥Á €    ð¿             ¸
PL/SQL procedure successfully completed.
SQL> SY.

Import error for .prproj files

so i've just touched adobe mc CS4 for the first time, my church is allowing me to use the studio/editing room while not being used during the day at certain times. i am compiling a dvd of my wedding to make it more proffessional than the previously made vesion (which looks very amateur with a basic template menue, and so on). i plan to use some flash on the menus and maybe even include an easter egg as well. anyway, with the other program i just imported the media from the camera (which is an HDD camera that records everything into .mod files) i've had a .mod converter for quite some time so those are already converted.i saved them on an external HDD, i created a folder on the computer and just dragged and dropped the folder onto there.
anyway, with my old program (cyberlink power producer/director) i'd just import the media into the editor, make the edits and cuts and save the project. then import the project into the author program to make teh menus and burn it. when i first pulled up the program to get acclimated to it, i decided to run through a very quick dry run of a full start to stop dvd burn of a very small video. i did a short series of clips and edits in Premiere (the oevr all project is like 6 minutes long). saved the project, and when i go to import the project into Encore it reads "the software that's used to decode the media is not available on this system""adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
i can encode the project as an mpeg, and it imports just fine. i can import the individual clips that make up the project into encore, they work fine as well.but if i import the .prproj file, it gives me the error. so whats the deal? can you just drag and drop these files in like this? i'm just trying to keep from constantly encoding the files after 3 encodes, i'm affraid the quality of the video will suffer too much degradation, so i'm trying to get it to where i can just import the project, and then at the end burn the project to dvd.
i figured it better to ask on here, this way i look like a fool anonymously, and not look like a fool to people i actually know. heh.

PrPro will come to you. It has fewer "automations," and "big-button" solutions, than PowerDirector (and Magix and PrE), but with that comes power!
It is the same with Encore vs the limited authoring capabilities of PowerDirector, Magix, Roxio and PrE. Again, more hand-work, but oh, so much more power!
Can you tell that I am a control freak, and do not mind getting my hands dirty to access the power?
There are a few things that Encore cannot do, that programs like Sonic Scenarist can do, but there are usually workarounds, either in the design, or in the implementation, that will get you "there," or close.
I strongly recommend that any new user to Encore purchase and read Jeff Bellune's excellent book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. That book covers everything that Encore can do, with two current exceptions - Adobe Dynamic Link (CS4 version) and BD authoring. Both of those were added after the book and EncoreDVD 2.0, were released. However, the Help files cover both of those newer additions well.
Along with the fundamentals of Encore, Jeff covers all sorts of tricks and tips for getting more out of Encore, than the DVD-specs. actually allow. Obviously, he cannot break those rules, though he CAN help you create the illusion that the rules HAVE been broken. The user will swear that they just saw things, that are impossible, based on the DVD-specs., which are very limiting. Hey, it IS "smoke and mirrors," but if the user is fooled, you have succeeded, right?
Good luck, and when you get around to adding some "tricks" to your DVD-Videos, post back. I'd suggest a new thread, so that other users can benefit from the new title, and so that users know that this is a new question. You will find that there is not too much, that someone here has not done, one way, or another. Oh, there ARE some limitations, where there is no good way to "bend" those DVD-specs., but you'll be surprised at what one can "bend."
Happy authoring,
Hunt

IMPORT ERROR for .dmp file

Hi,
I am getting this error, when I try to import a .dmp file:
ERROR:
Message 100 not found; No message file for product=RDBMS, facility=IMP: Release 9.2.0.1.0 - Production on Wed May 23 15:35:53 2012
Copyright (c) 1982, 2002, Oracl
Invalid format of Import utility name
Verify that ORACLE_HOME is properly set
Import terminated unsuccessfully
IMP-00000: Message 0 not found; No message file for product=RDBMS, facility=IMP
There is imp.exe file in my bin folder. Also the environment variable is set.
I have no clue how to overcome this problem.

not sure what is happening, but my guess is that your imp msg file is not loaded correctly. The imp 0000 message is:
00000, 00000, "Import terminated unsuccessfully\n"
// *Cause: Import encountered an Oracle error.
// *Action: Look up the accompanying Oracle message in the ORA message
// chapters of this manual, and take appropriate action.
Dean

Premier CS6 importer error for mxf files

I can't import any mxf file into Premier CS6. I don't really understand this situation.
I have intalled Canopus.HQ.CODEC.v6.0.7 and for example my vlc media player plays fine all of my mxf files.
Can anybody help me solve this issue?
Thanks

Probably because they want to be able to investigate the exact type of mxf file it actually is. Because I edit mxf files with Premiere cs6 fairly regularly and I never have issues. So obivously something is either different with that specific type of mxf or something is corrupted which I doubt. Could you upload a small test file? So we can see if it will import into Premiere on our systems. Also since you're saying they digitized them using a canopus capture device/card and or software I'm thinking you may need that software and or the specific codec installed on your system in order to actually make use of that type of file.
I'd recommend downloading the entire "canopus playback codec pack". This should solve your issue. However I have no way to promise it will, I'm fairly sure it should work... Simply google "Canopus Playback Codec Pack" and the first result will give you the info your need to get the full playback package. I'm guessing this your problem.

Oracle Dump file Import Error

Hello,
I need an urgent reply on this. Im trying to import a dump file which was created in Oracle 10.2 on an Xp system to Oracle 10.1 on Win2003 server. Pls find below the error encountered.
Regards
Kazeem
IMP-00008: unrecognized statement in the export file:
IMP-00017: following statement failed with ORACLE error 2248:
"ALTER SESSION SET PLSQL_OPTIMIZE_LEVEL = 1 NLS_LENGTH_SEMANTICS = 'BYTE' PL"
"SQL_CODE_TYPE = 'INTERPRETED' PLSQL_DEBUG = FALSE PLSQL_WARNINGS = 'DISABLE"
":ALL'PLSQL_CCFLAGS = ''"
IMP-00003: ORACLE error 2248 encountered
ORA-02248: invalid option for ALTER SESSION
IMP-00000: Import terminated unsuccessfully

Hello,
I need an urgent reply on this. Im trying to import aYou have already gotten valid answers in your first thread here:
Importing Oracle DB dump file
dump file which was created in Oracle 10.2 on an Xp
system to Oracle 10.1 on Win2003 server. Pls findYou cant. As already told, you need to redo the export with 10.1 exp utility against the 10.2 database. (so to produce a dump file that your 10.1 db understands)
IMP-00008: unrecognized statement in the export file:

Solution import error for on-premise

Hi all,
I have a solution in my production environment(divided into 3 parts), when i'm trying to deploy the solution (Managed/Un-managed tried both) onto the client server it is throwing an error without any message (Like a generic message). I have checked the Import
log and CRM Trace log files and tried troubleshooting but there is no luck.
I will post the import log and the trace log here, can anyone please help to solve the importing solution
Solution
Name
StdGasTransmission
Display Name
StdGasTransmission
Description
Version
6.0.0.0
Package Type
Managed
Publisher
Name
DefaultPublisherNMPRCPIPELINESAFETY
Display Name
Default Publisher for NMPRC-PIPELINESAFETY
Description
Default publisher for this organization
Email
Website
City
Country/Region
Street 1
Street 2
ZIP/Postal Code
State/Province
Phone
Status
Failure
Message
The import failed. For more information, see the related error messages.
Progress [%]
97.48
Duration [s]
244.1
It is showing as unprocessed status for the files which is shown below
Workflow
{938627d1-4fb7-e411-80f2-00155d0a5b12}
Lock Inspection Field
Lock Inspection Field
Unprocessed
Workflow
{527df5a1-038f-422a-9256-932a23e4b0d0}
Std Ins F1 Gas Trans
Std Ins F1 Gas Trans
Unprocessed
Workflow
{bf6d20dd-f82b-43e0-8309-91c245d885df}
GasTransmission_AutoRoute
GasTransmission_AutoRoute
Unprocessed
Workflow Activation
{938627d1-4fb7-e411-80f2-00155d0a5b12}
Lock Inspection Field
Lock Inspection Field
Unprocessed
Workflow Activation
{527df5a1-038f-422a-9256-932a23e4b0d0}
Std Ins F1 Gas Trans
Std Ins F1 Gas Trans
Unprocessed
Workflow Activation
{bf6d20dd-f82b-43e0-8309-91c245d885df}
GasTransmission_AutoRoute
GasTransmission_AutoRoute
Unprocessed
Plugin Assembly
StdInsForm1_GT_AR_2_PM, Version=1.0.0.0, Culture=neutral, PublicKeyToken=bf2df9b91e15403a
StdInsForm1_GT_AR_2_PM
StdInsForm1_GT_AR_2_PM
Unprocessed
Plugin Assembly
StdGasTransmission AutoNumber, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ab1a46818ba347cf
StdGasTransmission AutoNumber
StdGasTransmission AutoNumber
Unprocessed
Plugin Assembly
StdInsForm1_GasTrans, Version=1.0.0.0, Culture=neutral, PublicKeyToken=427e236049a09a8e
StdInsForm1_GasTrans
StdInsForm1_GasTrans
Unprocessed
Plugin Assembly
StdInsForm1_GT_AR_2_WPA, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9c073ad110dc36fb
StdInsForm1_GT_AR_2_WPA
StdInsForm1_GT_AR_2_WPA
Unprocessed
Plugin Assembly
StdInsForm1_GT_AR_2_QAQC, Version=1.0.0.0, Culture=neutral, PublicKeyToken=76f0d5ed3da46871
StdInsForm1_GT_AR_2_QAQC
StdInsForm1_GT_AR_2_QAQC
Unprocessed
SDK Message Processing Step
{5c4751aa-d943-e411-80de-00155d0a5b12}
StdInsForm1_GasTrans.StdInsF1_GasTrans: Create of nmprc_phmsastdform1
StdInsForm1_GasTrans.StdInsF1_GasTrans: Create of nmprc_phmsastdform1
Unprocessed
SDK Message Processing Step
{9a918d50-50b7-e411-80f2-00155d0a5b12}
StdGasTransmission_AutoNumber.StdGasTransmission_AutoNumber: Update of nmprc_phmsastdform1
StdGasTransmission_AutoNumber.StdGasTransmission_AutoNumber: Update of nmprc_phmsastdform1
Unprocessed
Publish StringMaps
Unprocessed
Root Components Insertion
Unprocessed
Dependencies Calculation
Unprocessed

Hello Vighnesh,
Could you verify this blog to see if it applies, explained here:
Import of Solution Fails Without Error Message in Dynamics CRM
Let us know if it applies.
Best Regards.

Dmp file import error

Hi
My Oracle version is , oracle 9i , i wanted to import a dump file which has taken by same version of oracle.when i executed the imp command for that dump file , i'm getting following error message.
Export file created by EXPORT:V09.02.00 via conventional path
import done in UTF8 character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
IMP-00017: following statement failed with ORACLE error 4068:
"BEGIN "
"sys.dbms_logrep_imp.instantiate_schema(schema_name=>'Hotels', export_db_na"
"me=>'Hotels.US.ORACLE.COM', inst_scn=>'1363425837');"
"COMMIT; END;"
IMP-00003: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_LOGREP_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_LOGREP_IMP", line 271
How can i solve this ? can some body help me plz ?
Thank you
Luke
Edited by: user2975888 on Jul 10, 2009 7:36 AM

Hi
Sorry for delayed reply with results.
SQL> select count(*) from dba_objects where status like '%INVALID%';
COUNT(*)
29
OWNER OBJECT_NAME OBJECT_TYPE
SYS DBA_LOGSTDBY_LOG VIEW
SYS DBA_LOGSTDBY_PROGRESS VIEW
SYS DBMS_ASYNCRPC_PUSH PACKAGE BODY
SYS DBMS_CAPTURE_ADM_INTERNAL PACKAGE BODY
SYS DBMS_CAPTURE_PROCESS PACKAGE BODY
SYS DBMS_DEFER_QUERY PACKAGE BODY
SYS DBMS_DEFER_SYS PACKAGE BODY
SYS DBMS_DEFER_SYS_PART1 PACKAGE BODY
SYS DBMS_INTERNAL_LOGSTDBY PACKAGE BODY
SYS DBMS_LOGMNR_D PACKAGE BODY
SYS DBMS_LOGMNR_FFVTOLOGMNRT PROCEDURE
SYS DBMS_LOGMNR_INTERNAL PACKAGE BODY
SYS DBMS_LOGMNR_LOGREP_DICT PACKAGE BODY
SYS DBMS_LOGMNR_OCTOLOGMNRT PROCEDURE
SYS DBMS_LOGMNR_SESSION PACKAGE BODY
SYS DBMS_LOGREP_UTIL PACKAGE BODY
SYS DBMS_LOGSTDBY PACKAGE BODY
SYS DBMS_REPCAT_MAS PACKAGE BODY
SYS DBMS_REPCAT_SNA_UTL PACKAGE BODY
SYS DBMS_REPCAT_UTL PACKAGE BODY
SYS DBMS_SNAPSHOT PACKAGE BODY
SYS DBMS_STREAMS_ADM_UTL PACKAGE BODY
SYS LOGMNR_DICT_CACHE PACKAGE BODY
SYS LOGMNR_GTLO3 PROCEDURE
SYS LOGMNR_KRVRDA_TEST_APPLY PROCEDURE
SYS LOGMNR_KRVRDLUID3 PROCEDURE
SYS LOGMNR_KRVRDREPDICT3 PROCEDURE
GATEWAY AB_TRIGGER TRIGGER
GATEWAY APPLETINFO_TRIGGER TRIGGER
29 rows selected
This is the error i'm getting when i'm importing the dmp file .
Import: Release 9.2.0.7.0 - Production on Sat Jul 11 18:48:37 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning option
JServer Release 9.2.0.7.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
import done in UTF8 character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses US7ASCII character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
IMP-00017: following statement failed with ORACLE error 4068:
"BEGIN "
"sys.dbms_logrep_imp.instantiate_schema(schema_name=>'GATEWAY', export_db_na"
"me=>'GATEWAY.US.ORACLE.COM', inst_scn=>'1363425837');"
"COMMIT; END;"
IMP-00003: ORACLE error 4068 encountered
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SYS.DBMS_LOGREP_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_LOGREP_IMP", line 271
ORA-06512: at line 2
Thanks
Luke

File Import Error for mpeg-1?

Similar Messages

Maybe you are looking for