File incrementer problem
Hi, I made a vi to take images and save it in a file in a While loop (run it every 3 sec.). The images are saved to files whose filenames will increment by one. The problem is that it only can save 10 files. After that nothing is saved. I attach the vi with this question. I appreciate if anyone can check it for me and let me know what the problem is. Thanks.
Attachments:
test.vi 63 KB
Do not have all of the IMAQ VIs so I can't test it all but here are some observations:
Why do you run a open file on the c:\rui\a path on the first iteration and then just convert the refnum from open to a path again? If you have a file called a then that file will be opened and never closed...leaving it open...If you just need the path then no open is necessary.
The loop outputs the paths:
0: c:\rui\a (in this case a is opened)
1: c:\rui\a1
2: c:\rui\2
3: c:\rui\3
Is this really the name of the files you want to write?
Now - if these files already exist in that directory...then they will probably not be overwritten unless you do edit the write BMP function to do so.
What do you do with the open "a" file, it should be closed somewhere (if it really
is a point in opening it(?)).
If you probe the different wires you should be able to see what happens after the first 10 files...is there a valid image out from the Snap.vi? If there is try probing inside the write...
MTO
Similar Messages
-
Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
TeryYou have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.
-
I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently. I've made no major changes. I've ran a diagnosis on my back up drive with no problems. The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message. I can see the shared drive in Finder. The light on the drive blinks while it starts the back up. I can see the shared folders on the networked drive. The backup process starts but for some reason it just stops. Can anyone help?
You can't repair a network volume in Disk Utility.
Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.) -
I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?
Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD -
How to debug file content conversion problems?
Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant GuptaHi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy -
File Proxy Service Problem on errors
In continuation of this thread...
File Proxy Service Problem on errors
We are now facing two problems.
1.The proxy service is executed twice
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.
Not sure how to fix :(1.The proxy service is executed twice Check if this is due to transaction timeout issue as discussed here. Re: OSB File polling working twice with the same file
2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.I am not sure wehther you have any option here. You can check with support. Alternatively can raise notification mail with the timestamp and some file/business identifier from the file. The support person can then open the file from error directory to verify the file/business id in the file or educate the support user that the files will have a prefix -
I want to export collections of files from Lightoom.
I want to rename the newely exported files, but I want to use the same file number suffix as the original file.
I also want to embed the oringal file name in the metadata of the newly exported file.
The problem is that, when I go into the File->Export dialog i.e. the "Filename Template Editor" the orginal "file number suffix" is not showing up in what would be the newly created filename. The orginal file number suffix does not appear to be part of the metadata.
The current filename on disk does however have the file number suffix as part of the name.
However it does not seem possible to extract part of the current file name (i.e. the number suffix) on export.
If I rename the files using a number sequence then adding or removing a file will change the sequence on subsequent exports of the collection.
(Not something I want to do, since it would then be difficult to keep track of the images used originate the exported file, if I updated the collection.)
Renaming all my original files is not a viable option since there are too many of them and different exported files may be in more than one collection.
*Any suggestions as to how to get the file naming I want for the exported files, i.e. "placename-oringal file number suffix"?
(Given the file number suffix is missing from the metadata)
*Also I would like to include the existing file name in the metadata of any new file name.
Any suggestions on how to automate this?John said:
> Unless you check "minimize metadata", it should all be there.
No I have not checked this box.
> Second, if you rename your files just before you Export (and not in the Export dialog, but actually rename them by batch
> so the LR name is changed) you'll be able to link them up to the originals much more easily.
No this will not work. My naming method is quite useful for me, but not useful for potential buyers.
When I export collections I want to simplify the names.
> Third, the rename editor is pretty flexible.
Yes I know, usually it is sufficient, but in this case it does not do what I want.
> Finally, all the metadata is there, and searching is much easier via it rather than a complex naming convention
> (not that it's so complex, but getting there may be.
Not sure I completely agree here. My naming method works quite well for organising images and for processing and so on.
Now since I have collections spanning multiple directories and so that I want to export the files with a simplified filename.
I expected to be able to do this using the file name editing template.
The BreezeBrowser renamer is much more flexible than the Lightroom filename template editor, so I may end up using that.
However it will be messy and add a few extra steps. i.e. export to a new directory using the existing filename. Then use Breezebrowser to rename the files by extracting the "file number suffix" from the original filename and making sure there is sufficient information in the new filename to create a one-to-one mapping. Then upload the new files to the website.
I stil don't see how to get the original file name into the metadate of the new filename though?l
Really I should be able to do all this in Lightroom. -
error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing
Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder. -
I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this? -
I am loading hierarachy through flat file but facing problem
i am loading hierarachy through flat file but facing problem when creating infopackage still error coming please suggest details what are steps followed
Hi,
Follow the steps:
Hierachy through flat file
 First create a flat file save as in .CSV format. Then close the file.
 Create info area in info object then info object catalog opens then create it then info object screen opens then another screen opens were you will give data type, length then select option hierarchy tab, then select it simply select the check box with hierarchies.
 Select attribute tab in that name, age, address, phone then activate it then come back to the main screen then select characters right click a small screen open then select info object then a small screen opens then create sales region and activate it.
 Then return back to the main screen then click characters right click on it then a small window opens then select info object option & create sales office and activate it.
 Then return to the main screen then select characters then the ID then the double click on it then the other screen opens select hierarchy tab then select external chars in hierarchies then click on it then other screen opens then select find tab then give the sales region info object name and click continue then it finds the name.
 The name would be scroll on the other screen then the office should be find the same way as region then office would be scroll on the other screen then continue and activate it.
 Then come back to the main screen then go to info source option then it opens then create application component then it opens other screen then click continue it
 Then create info source for master data then select direct update option there give the name of the info object of as ex; YID_AS2 then click continue.
 Then the YID_AS@ could be seen in the main screen then right click on it. Then a small option opens then click assign data source option then other screen opens there it gives the empty space double click on it then PC file then click continue then another window opens click continue then again screen opens click continue again a pop up screen opens click continue.
 Then another screen opens there the attribute data source then activate it then select hierarchy activate it then the left side data structure/ hierarchy then click on it then it opens another screen then click hire maintenance button .
 Then give the hierarchy name (your wish) then go with continue then yes then save then go back to the main screen.
 Then maintain the flat file as node id, info object, node name, link name, parent no.
 Then info package creation then click on the flat file right clicks on it then a other screen opens then select attribute data source and then continue.
 Then other screen opens then select external data tab in .CSV then click 1 the enter preview then another screen opens then click then it shows the preview then schedule then start then monitor click on it then it opens other screen then click on the master data then we can see the data then go back to the main screen.
 Then select the flat file right click on it then it gives other screen then select hierarchy in that then click continue then it opens other screen then select hierarchy selection tab there you can see the file name then select the button of hierarchy.
 Then select External data then the file name in CSV then processing tab only psa option with update subsequently in data targets then the update it schedule start then the monitor then go to the main screen.
 Then go to info object then select the file id which you have given then double click on it then select hierarchy or text file then the contents then execute it.
 Create a transaction table , cube in a normal way. We can see the result in reports we have to give the hierarchy name in the properties of rows where we drag the characteristics id then we can see the records which we have entered man usally after executing the report.
regards
ashwin -
I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?
found it in another area
Where do I find the cc getting started Katies.mulib File ? -
My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
-
[svn:fx-trunk] 11707: Fix incremental compilation problem with styles.
Revision: 11707
Author: [email protected]
Date: 2009-11-12 10:52:49 -0800 (Thu, 12 Nov 2009)
Log Message:
Fix incremental compilation problem with styles.
QE notes: None.
Doc notes: None.
Bugs: SDK-24173
Reviewer: Paul
Tests run: checkintests
Is noteworthy for integration: No.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24173
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.javaYou have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps -
Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution
Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips. -
File (Directory) object problem?
Hi there. My problem is as follows. The method below is supposed to access an pre-existing directory with five previously saved test files, read in those files as account objects, add the objects to an ArrayList, then return the ArrayList. It seems to be able to create a file object representing the directory alright but it then insists that there are no files in the directory! Have I fouled up or is there some subtlety that I'm unware of? I was wondering if the fact that the account files have a .bac extenstion had something to do with it.
Here's the method, with the two lines of code where I think the problem might lie in bold print:
public ArrayList retrieveAccounts()throws IOException{
ArrayList accounts = new ArrayList();
File accDir = new File("C:" + File.separator + "accounts"); //creates a directory object
//The following S.o.p statements are for test and maintenance purposes rather than user feedback
System.out.println("Directory " + accDir.getCanonicalPath() + " opened");
System.out.println("Confirm Accounts directory exists: " + accDir.exists());
System.out.println("Directory: " + accDir.isDirectory());
String [] accFiles = accDir.list(); //gets a list of files in the directory and saves it as a String array
System.out.println("Number of files in directory: " + accDir.length());
while(i < accDir.length()){
filename = accFiles;
try{
//open layered input Streams to access the next account file in line
ObjectInputStream in = new ObjectInputStream(new FileInputStream("C:"+ File.separator + "accounts" + File.separator + filename));
account = (Account)in.readObject();
accounts.add(account);
in.close(); //closes Streams for that particular file
}catch(IOException e){System.out.println("Filing error as follows: " + e);
}catch(ClassNotFoundException e){System.out.println("Class not Found. Details: " + e); }
filename = null; //frees up reference for next file
i++;//counter increments by one
return accounts;This is what I was trying to do minus the comments and maintence and test code:
public ArrayList retrieveAccounts()throws IOException{
ArrayList accounts = new ArrayList();
File accDir = new File("C:" + File.separator + "accounts");
String [] accFiles = accDir.list();
while(i < accDir.length()){
filename = accFiles;
try{
ObjectInputStream in = new ObjectInputStream(new FileInputStream("C:"+ File.separator + "accounts" + File.separator + filename));
account = (Account)in.readObject();
accounts.add(account);
in.close();
}catch(IOException e){System.out.println("Filing error as follows: " + e);
}catch(ClassNotFoundException e){System.out.println("Class not Found. Details: " + e); }
filename = null;
i++;
return accounts;
By the way, your the first Java programmer that I've met that doesn't like comments! :)
NOTE: Think I may have spotted where I went wrong in my code.
filename = accFiles;
Forgot to point it at the specific element of the array, like so:
filename = accFiles[i];
Thanks for your help!
Maybe you are looking for
-
I've had my 30GB Vision:M for about 8 months now, and recently, it's been starting to crash a lot. Often, it will not start up and when it does, I'm often greeted with a "hardware error" or "rebuilding." Usually, it will seem to be working fine, but
-
What is the application in the System Application Server
Hi, I'm a beginner who does not have much knowledge on Application Servers and databases. Would like to ask, when we log in to the Sun Java System Application Server, we can create a database under Connection Pools. So would like to ask, what is the
-
InDesign (CS4) takes focus back after switching to other program: very annoying
I am getting more and more annoyed by the fact that InDesign keeps taking back the focus after closing a document. I am working in InDesign (Mac OS X 10.6.4), I close the document and switch to (for instance) the Finder and suddenly I am back in InDe
-
Old zen micro battery problem wont fully cha
okay lets see my zen micro is really old. 5gb its like the really old generation. anyways i havent used it for like months. now im giving it to my lil sister so yea of course the battery is drained. so im charging it. i've been charging it for 2 week
-
Hi Friends, I created the sales order using VA01 and enter the payment terms and saved. But mu requirement is when i go through VA02, payment terms field must be in display mode. So, user not able to chage the payment terms value. Please give exact s