File info on ipod

Hiya
Has anybody found / written an app for the iphone that allows the file info / xmp / iptc data to be read and edited?
If not does anybody have any pointers on how this can be achieved?
Thanks for your help.
Chris

i'm manually syncing because everything doesn't fit
I have ~20GB of music and 4GB iPod and I auto sync only selected playlists.
Bummer that there's not a way to do a manual sync from the playlist it created to load the iPOD in the first place.
There is.
Select the iPod Music tab.
Select Sync music - Seleced playlists.
Add/remove from these playlists.

Similar Messages

Cant delete files from my ipod

i cannot delete a file from my ipod and now i do not have enough room to move any songs onto my ipod

If you have all your music on your computer as well, then just Restore:
http://docs.info.apple.com/article.html?artnum=60983
This will wipe everything from your iPod.

IPod classic displays 'No music' after sync, HDD problem? Geschiedenis • Verwijder So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn't find any files on the iPod anymore. H

So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
Thanks in advance!

Hi turingtest2,
Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
Do you think that there is any other solution besides the method you mentioned involving Smart Playlists?

Updating file info

I started using iTunes COM interface (Windows) in order to control the content of music in iTunes.
I have my own music library, which contains all my music, but not all of that music is wanted in iTunes.
Mainly because of size limitations of my iPod.
Therefore I select the music for my iPod from the database.
When needed I run a syncronize, where new tracks are added, changed tracks are updated and tracks not wanted in iTunes are deleted.
That has worked very well for a long time.
Since version 10 of iTunes, I have noticed a new behaviour of iTunes.
If I make changes to a file (mp3-id3v2.3), then this change is reflected in iTunes almost immidiately.
That was not the case earlier.
Can anyone confirm, that iTunes 10 now picks up the change of the file?
I had to do a UpdateInfoFromFile to force iTunes to reread the file info.
Unfortunately, this does not seem to work anymore.
Can anyone confirm that? If yes, is it a design change or a bug?
Regards
Thomas Hamstrup

rness,
Remember it's duration of you project and not file size that iDVD cares about.
Are you sure that the second part of your project is still indication a duration of 2hr. and 20 min. or is it just showing the original file size.
Because of iMovie HD 6's non-destructive editing, it's entirely possible to cut a movies running time in half without the project file size changing at all.
Matt

Getting video files to your iPod

Q. How do I get video files to my iPod?
A. First of all for DVD's and the like, you'll need a video capture device(a.k.a. a video card that usually comes with a program that allows you to record video from a number of sources).
Once you've recorded your file which might not be Mpeg-4 or H.264 but will probably be AVI or WMV, what I recommend at this point is the iPod video converter from Xilisoft. this powerful little tool will enable you to open just about any file(WMV,MPEG,AVI...and so on) and convert it to and iPod compatible format. The plus of this program compared to others is not only can you download a trial version, but you get five full minutes of recording without any watermarks(basically print over your new recording that usually says "trial version" or something that can only be removed by purchasing the full version of the product.)
Third, for editing this is where you can put the 40 bucks you spent on quicktime pro to some use. Now you should be able to open your file in Quicktime without any problems and edit your video for final viewing. (That's if you need to of course. Some video capturing devices don't allow you to do editing.)
Lastly, if you can't be bothered with all this editing stuff, drop your new video file into your iPod in iTunes, right click the file once iPod is updated, select "get info". One of the tabs should allow you to input the point or time you want the file to start playing.

They first need to be in iTunes. Find them on the music store under podcasts.
Once they are there, connect the iPod and go to edit-->preferences in iTunes. Clcik the iPod tab. Then click the videos tab. Make sure update all videos is selected. Then click the podcasts tab under the iPod and make sure that update all podcasts is selected. Click OK.
If they are not in the right format, then right click an epsidoe and go to convert selection for iPod. You can highlight multiple episodes and convert them at once.
btabz

Getting data files on the iPod

the ipod shows that you have to drag and drop files into the ipod from the summary tab, i enabled the disk use, but can not upload no files to my ipod?
can files be saved onto the ipod in PDF files? there is no tab for notes...
cam i even view files on my ipod??? not sure if im clear in explaining this, any help please...

the ipod shows that you have to drag and drop files into the ipod from the summary tab
Eh?
there is no tab for notes...
cam i even view files on my ipod??
Does this article answer your question?
http://docs.info.apple.com/article.html?artnum=93951

How do I transfer files from my iPod to my hard drive?

I have a 30G video iPod, and I want to transfer some files on the iPod to my PC. There doesn't seem to be any easy way to do this.
Can anyone help?
I'm on a PC with Windows XP by the way.
Thanks

For iTunes 6
http://docs.info.apple.com/article.html?artnum=304304
For iTunes 7
http://docs.info.apple.com/article.html?artnum=300173

JS scripted needed to add custom text plus filename to file info in document title

Would greatly appreciate any help with this one...
JS script to add custom text plus filename to file info in document title
many thanks

Super :O)
I have a folder of say 50 images and I want to run a JS script batch
example in the document title : image Nr 81205
custom text is "image Nr" + file name "81205"
activeDocument.info.title =" image Nr" + decodeURI(activeDocument.name);
would this be correct without seening the file ext
many thanks

Unable to delete data files from my Ipod if used as data storage...

Hello everybody
I bought months ago an Ipod Nano 8GB. I've got an issue when i use it as disk storage i'm not able to sort out. I've checked all the topics but i cannot find any solution.
Example: I use the Ipod with the option "Manually manage music and videos". I put audio and video files on my Ipod through Itunes, then i put also some files on my Ipod as normal data files through my Mac Finder (Easy, i drag VLC, JPG files etc. from folders to my Ipod). The Ipod/Itunes summary page shows (Correctly) the capacity column colored in blue (Audio), video (Purple) and orange (Data). No probs when i transfer data files to another computer.
Problem: when i delete the data files from my Ipod (Through finder) the orange column doesn't disappear (I have no problems if i delete audio/video files via Itunes) and although i've actually deleted all the files if i try to add some other data or videos/music files to my Ipod, Itunes says that there is no space available in my device. It's very strange, i check and double check all the options but eventually i have to restore my Ipod all the times and (Pretty annoying) add all my files again.
It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
It'd be great if someone can help me out as it's very important for me to be able to use my Ipod as disk storage, thanks a lot!

It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
Empty it from the Finder menu or by control-clicking it in the Dock.
(44613)

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

Copying a file from my ipod to the PC

I have a Dell laptop running Vista with itunes installed and need to copy a large music file from my ipod 20 GB to my pc. It is one of the first ipod's....
I tried this earlier and all my music was erased from the ipod
After I upload the file with the music to the pc... I would like to copy to itunes
Please help
Thank you!

iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes:
Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to iPod when you connect it to the computer.
Manually manage songs and playlists. You can also choose to transfer music to iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to iPod.

Cannot delete files from my ipod shuffle!!!

I am new to using an ipod and i cannot delete files from my ipod, on itunes, it only shows the license agreement where the ipod files are supposed to be and no matter how many times i uninstall and reinstall itunes and agree to the license agreement i can't access anything else. can anyone help me at all i feel like a complete idiot!

Pressing return will get past this screen as there is a button at the bottom right of iTunes which you likely cannot see.
Set your screen resolution to at least 1024x768 to see this button.

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

File Info Dialog problem

Hi,
Not sure if this is a bug or if I'm just missing a setting someplace.
Problem: I write a lengthy caption in the "Description" window of the File Info dialog. Later on I want to use that same caption on a different image.
Using CS3 on Windows I can click on the flyout arrow next to the "Description" window and input the entire caption.
Using CS3 on Mac, the flyout will only input sections of the caption. It seems like the Mac version breaks the caption apart based on any punctuation that is in the caption.
Ex. If my caption is "01 July 2008, Los Angeles, California, USA - Paul has issues with Photoshop, causing a problem when captioning files."
Windows puts the entire caption in the field. Mac breaks it down like this:
01 July 2008
Los Angeles
California
USA
Paul has issues with Photoshop
causing a problem when captioning files
I don't recall this being an issue with PS7 or CS1. Am I missing something or is this just the way CS3 works?
Thanks in advance for any help!
-Paul

I narrowed down the issue even more. Non-English languages have their strings, tags, and texts stored in a file named strings.txt in a language-specific subdirectory in the Resources directory in the Adobe Bridge CS6 program folder. The strings.txt file includes, among many other things, a language-specific decimal separator character—which in English is a dot but in many non-English languages is a comma.
When I replace the comma as the decimal separator in the German-language strings.txt file by a dot then all of sudden the f-stops are displayed correctly in the thumbnail pane ... well, except that e. g. "f/2,8" now gets displayed as "f/2.8" which in German is wrong but acceptable—and definitely much better than "f/2,0" which is unacceptably wrong when the actual value is 2.8.
The idea to try this dawned on me when I noticed that in some places in the metadata pane, decimal numbers are displayed with a comma (respecting the decimal separator character given in strings.txt); in other places, they're displayed with a decimal point (ignoring strings.txt). Those using a dot are correct; those using a comma are wrong. So there's two bugs in Bridge rather than just one. First bug: In some places, the language-specific decimal separator character is ignored. Second bug: When it is not ignored then the number displayed will be wrong.
So my workaround now is to use a dot as the decimal separator character rather than a comma.

How to make something default in File Info..

Hi All,
i would like to know that do we have any settings where we can set the custom panel as the default panel while loading the "File->File Info..." ?
any possiblility for calling the "File->File Info..." from the plugin and setting the custom panel as default
Help Me!
Thanks
Srinivas

Hi Patterson,
Thanks again for your reply,
Can we call a java-script or vb-script from a plug-in?
can i have a sample code for that or specific SDK where i can call the script from a plugin
this is my code:
1 get the total count of menu items
2 compare that with the require one ("File Info...")
and next
AIErr result = sActionManager->AINewActionParamValue(&valueParameterBlock1);
result = sActionManager->AIActionSetString(valueParameterBlock1,'itnm',"CFile Info");
result = sActionManager->AIActionSetString(valueParameterBlock1,'lcnm', "File Info");
result = sActionManager->AIActionSetInteger(valueParameterBlock1,'cmid', -2130705922);
result = sActionManager->PlayActionEvent("adobe_commandManager",kDialogOff,valueParameterBlock1);
i am stuck out here, not able to move an inch from here
suggest and help me
Thanks
Srinivas

File info on ipod

Similar Messages

Maybe you are looking for