File info Panel doesn't show up in CS6 apps

Hi all,
I have compiled a File Info Panel with EB2. It opens fine in CS5.5 apps but it's not accessible with CS6.
I can't see any settings in EB2 to have both versions supported. I also tweaked the manifest and get the ZXP recompiled but then althought the panel does appear, the content isn't built.
Any hint on what's happening ?
Best,
Loic

Hi Loic,
Do you know what directory you are installing the panel to? Is it /Users/<username>/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0/panels/
Can you try placing the panel inside of /Users/<username>/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0/panels/ instead. If your panel does not display when you open the FileInfo dialog on your development machine then you may need to adjust the flash player trust file so it is pointing at the 4.0 directory; /Users/<username>/Library/Preferences/Macromedia/Flash Player/#Security/FlashPlayerTrust
In the MXI file update the paths so it deploys to the 4.0 directory.
I will forward this issue onto the Extension Builder team as it seems supporting FileInfo panels between suite versions is not currently available.
Kind regards,
Lea

Similar Messages

Apps panel doesn't show installed Creative Cloud apps

None of my apps are showing as installed in the creative cloud application
Adobe are aware this issue exists, but their solution doesn't work ---> Apps panel doesn't show installed Creative Cloud apps
Can't say I'm surprised, Anybody knows how to really solve this problem?

It seems that Adobe doesn't think it's important to check for previous apps installation, and expects the user to manually match the creative cloud language would be installed apps language
So if you see that there is no app installed in your creative cloud just check their language settings in Preferences > Apps > Apps language.

Apps panel doesn't show Lightroom installed

I've had lightroom 5.5 installed through the apps panel previously. Apps now panel doesn't show Lightroom installed.
I've tried both these solutions, neither have worked:
Apps panel doesn't show installed Creative Cloud apps
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#UpdatesNotShowing
Any ideas how I can resolve this? Thanks.

Solution can be found here:
Lightroom keeps disappearing from my installed apps
Apparently that behaviour is normal. Just use the Install option instead of update.

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

CS5 Custom File Info Panels showing up in Bridge

If I create a custom XMP panel using the GENERIC model, how do I make it appear in Bridge, also?

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Custom XMP File Info Panel; Popup fields only showing 64 values max?

I've created a custom file info panel for use with Creative Suite (Primarily for Bridge, but works just as well for any "File Info..." aware app.
I just recently noticed that there seems to be a limit to the amount of values in a Popup (aka drop down) field? I have a few that are intended to have up to 132 values, but they stop at 64!
Here's a snippet of my .xml code. I'm thinking there could (hopefully) be a simply solution, but I don't know what that is, yet.
I've removed names to protect the innocent:
#/ ---- Header starts with this:
<xmp_definitions xmlns:ui="http://ns.adobe.com/xmp/fileinfo/ui/">
<xmp_schema prefix="xwnv" namespace="http://ns.xinet.com/ns/xinetschema#" label="Offline_Tagging"
description="$$$/Custom/Schema/Description=This panel for use by ___ team only.">
#/ ---- Field code example is the following:
<xmp_property name="Art_Director" category="external" label="$$$/Custom/Property/Art_Director = Art Director:" type="openchoice" element_type="text">
<xmp_choice raw_value="" label="$$$/Custom/Property/=(select)"/>
<xmp_choice raw_value="Firstname.Lastname" label="$$$/Custom/Property/Firstname.Lastname=Firstname.Lastname"/>
#/ -----repeat values x130
</xmp_property>
It would be great to solve.
Thanks in advance.

You might try the Bridge Scripting forum at http://forums.adobe.com/community/bridge/bridge_scripting

MetaData in file not shown in Illustrator cs6 file info panel

I have a command line application that puts meta-data into files. It was created using the 5.1.2 xmp toolkit. The metadata is in the file. I can see it if I just use TextEdit to look at the file. I can also see the custom metadata in the Illustrator CS5 File Info Panel AND the Photoshop CS6 File Info Panel. The information doesn't show up in the Illustrator CS6 file info panel. Any clue why?

The files I am testing with are .jpg's. They ultimately need to be opened with Illustrator which is why I posted. I only tested with Photoshop to see what would happen and was pretty surprised to see the data there. Like I said, it works in CS5 Illustrator, CS6 Photoshop, but the data just doesn't show up in the CS6 Illustrator (in the advanced nor the raw tab), and when I view the .jpg with textedit the data is difinitely there. Pretty weird.

FileInfo Custom Panel doesn't show xmp data: flex 3.6, FileInfo SDK 5.1

Just getting into XMP. Decided to make custom File Info panel for our custom xmp namespace data that will be applying to all our images in our archive.
Since still on Adobe CS 5.5, got the FileInfo 5.1 SDK. Got the Flex 3.6a package. I'm on Mac OS X 10.7.5, java version "1.6.0_37".
Compiled the "TestPanel" that comes with the SDK. That works. It has a fi:XMPTextInput item that shows the xmpPath="dc:title" dublincore xmp data, i can change it and save it and when i come back it is the changed data. When i look in the Raw fileinfo tab, it is there as i had modified it.
Now when i add a fi:XMPLabel for xmpPath="xmp:CreatorTool" no data is shown in my custom FileInfo panel. And when i add in my own custom xmp namespace data "mydata" that does not show either. The labels and textboxes are there for entering, but it appears that it is not parsing correctly to find the data to populate what is in the file already. I can type something in but it doesn't save it to the file. My custom xmp data namespace "mydata" data is showing in the Raw FileInfo panel so i know it is there, as i put it there with exiftool.
I have the required namespace lines in the mxml file for the panel:
<fi:XMPNamespaces>
<fi:XMPNamespace prefix="mydata" value="http://example.com/xmp/mydata/"/>
<fi:XMPNamespace prefix="dc" value="http://purl.org/dc/elements/1.1/"/>
<fi:XMPNamespace prefix="xmp" value="http://ns.adobe.com/xap/1.0/" />
</fi:XMPNamespaces>
The mxml file compiles and the panels load and display so it doesn't seem like it is the source files. It seems like a runtime issue. Since it does show the one dublincore xmp data it does seem like the panel is working, except for the "xmp" namespace and my "mydata" namespace. That's got to be a clue but being so new to this it is not giving me any directions to go in.
Any and all ideas are most appreciated.
Peace,
Dan

For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

XMP Custom File Info panels vs. Custom Metadata

Sorry if this question is a little confused, but I don't exactly know what I am talking about yet.
I use Rob Cole's custom metadata plug-in, which is great as far as it goes. As I understand it, it is a way to create custom data fields in the Lightroom database, give them labels, and manipulate and sort images according to those values. It is very useful for what it is. However, where it shows its seams is when you want to edit an image outside of Lightroom and then import the image back into Lightroom (for instance exporting the image, or editing it in Photoshop). In that case there is no way to get the data in the original into the derived copy except by doing it by hand, which can be very labor intensive if you, say, export a few hundred or a few thousand images. And, of course, you can only see the custom metadata in Lightroom, since it doesn't live in the file.
If I understand it correctly, "Custom File Info panels" for xmp data should just solve this problem. You would define your data, and it would be understood by "standard Adobe applications". A brief search of the web does not indicate that Lightroom is one of these "standard Adobe applications", so I assume that while I can use these panels in Bridge and in Photoshop, the data would not be available to me in Lightroom?
Any insight?
Thanks
Alan
robcole

alanterra wrote:
there is no way to get the data in the original into the derived copy except by doing it by hand
Better ways:
1-1 or 1-many:
(on the file menu: plugin extras) which brings up:
If you want to do "many to many-others-like-them", you have to use a different plugin, like Relative Antics..
alanterra wrote:
If I understand it correctly, "Custom File Info panels" for xmp data should just solve this problem.
Many of us are hoping Adobe enhances Lr to provide better support for custom metadata - as you've noticed, Lightroom is not one of those "Standard Adobe Applications" referred to in the above link.
Rob

Is there anyway to import my file title like img_001 into my file info so it will show up in my meta data. I have 300 images and I was wonder if I could batch process them...

Is there anyway to import my file title like img_001 into my file info so it will show up in my metadata?

you can re-number files as you import
you may need to a test of a few un-important files
click the re-name file panel >>tick>>template>>click on arrows>>edit and that will take you the customize panel
add image name like "img"
then add numbering I have only used the first one (import)
make sure you add two "00" so they stay in order
should look like img-001
bugga of a number tool imo; bridge is easier/better
you could also rename in windows or bridge or other programs before importing BUT ONLY IF THE FILES HAVE NOT BEEN IN LR ALREADY. Sorry to yell thats important as you most likely know
Yell if that doesn't make sense

Custom File Info Panel CS2- CS4

I have a Custom File Info Panel that has been created in Adobe Photoshop CS2 and works in CS3. I am having trouble figuring out how to get it to work in CS4. Is there a way to port the Custom File Info Panel into CS4 without entirely recreating it?
I am seeing references to FileInfo SDK and creating a new Flex UI but I can't seem to find a definitive method on this pre-CS4 File Info Panel to the new UI - and I am in unfamiliar territory.
Any assistance or points in the proper direction would be most helpful.
UPDATE: Answering at least some of my own questions, I have followed the procedure here:
http://blogs.adobe.com/gunar/2008/11/customizing_metadata_ui_in_cs4.html
I am still having some trouble with a couple of the unique properties but I expect that they will be typos... I hope...
Any good reference information is still welcome.

Thank you for suggesting the PS Scripting forum but I think the next stop might be the XMP SDK Forum as there are a few similar questions there such as http://forums.adobe.com/thread/540397. But before I go impolitely cross-posting...
I've had some success and it appears that my custom file info metadata edited and saved in CS2 is now visible in CS4 and the reverse is also true - metadata edited and saved in CS4 is visible in CS2. This was built using the Generic Panel from the SDK according to the instructions shown at the link in my original post.
The only problem is that the external application that relies on the custom metadata doesn't see the CS4 version of the metadata. I suspect that this is just some general namespace issue. Perhaps if an XMP expert would be willing to comment on the conversion of the Custom Info Panel based on the following single portion of the metadata to see if I am doing it correctly - I would very much appreciate it.
In the CS2 Custom Info Panel XML I have this field:
<panel title="$$$/CustomPanels/XYZ/PanelName=XYZCorp Graphics MetaData" version="1" type="custom_panel">
group(placement: place_row, spacing: gSpace, horizontal: align_fill, vertical: align_top, reverse: rtl_aware)
static_text(name: '$$$/CustomPanels/XYZ/fullName=Full Name/Title of Graphic', font: font_big_right, vertical: align_center);
cat_container_edit_text(xmp_ns_prefix: 'xyzcorp', xmp_namespace: 'xyzcorp', xmp_path: 'FullName', container_type: seq_struct, horizontal: align_fill);
mru_popup(xmp_ns_prefix: 'twcable', xmp_path: 'FullName', no_check: true, vertical: align_top, container_type: seq_struct, mru_append: true);

</panel>
In my CS4 properties.xml the corresponding field:
<xmp_definitions xmlns:ui="http://ns.adobe.com/xmp/fileinfo/ui/">
<xmp_schema prefix="custom" namespace="xyzcorp" label="$$$/Custom/Schema/Label=XYZCorp Graphics MetaData" description="$$$/Custom/Schema/Description=CS4 Version of XYZCorp MetaData Custom Panel.">

<xmp_property name="FullName" category="external" label="$$$/Custom/Property/FullName_Label=Full Name/Title of Graphic:" type="seq" element_type="text"/>

<ui:separator/>
</xmp_schema>
</xmp_definitions>
It seems that the following CS2 => CS4 translations should be true:
"xmp_namespace" => xmp_schema namespace property (in this case "xyzcorp")
"xmp_path" => xmp_property name property (for this one property, "FullName")
is there another translation that I am missing? I am betting it has something to do with the CS2 "xmp_ns_prefix" but I am not entirely sure how to map this. Also perhaps something in manifest.xml (though it didn't seem like it)?
Many thank you's to anyone that can offer words of wisdom.
j

Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata

The cmd-keys / shortcuts doesn't work in the xmp file info panel btw. in the xmp / iptc fields (e.g. cmd+c, cmd+v, ...) of Adobe Bridge CS6 (Mac OS 10.6.8 and 10.7.3). You are not able to cut and paste info from one box to another like previous versions.
This bug only appears in the xmp file info window (opened via alt+i) in Bridge CS6 - if you edit information or metadata in the file info panel in Photoshop CS6 copy and paste from one field to another works.
The shortcuts also work under Windows (tested under Vista).
I noticed this minor bug already one in the Photoshop CS6 Beta more than one months ago. I hoped that this was corrected in the official test version, but unfortunately it is not. Although it is a minor bug, it is IMHO a basic function and would be very helpful in my daily work - it is too bad, that such a small thing is making working with the application a little bit annoying.

Thanks! If there is a workaround or simple solution, I would be very glad if you could inform me.
Christian
(signature removed by the Admin)
Am 14.05.2012 um 13:49 schrieb FrankBiederich:
Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
created by FrankBiederich in XMP SDK - View the full discussion
Thanks for your report; we'll look into it.
Frank
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
To unsubscribe from this thread, please visit the message page at Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in XMP SDK by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Message was edited by: Arpit Kapoor

Bridge CS6 - No Right Click to get File Info panel?

I've recently transitioned from CS4 to CS6 and am very pleased with the many changes that have been made. One Bridge CS4 feature that I utilized on a regular basis was that of accessing File Info by right-clicking on a file or selection of files and then entering file info metadata through the panel that opened, and sometimes automatically uploading that data from a pre-saved XML file.
Where do I access the File Info panel in Bridge CS6 so that I can adjust metadata properties for the respective file(s)?
Thanks,
Buck

Hi Yammer, thanks for the quick reply.
I've since tested it on different files and on some files it works, on others it does not.
It now see that it does work on AI, INDD, PSD, JPG, and PNG, but it doesn't work on GIF... I guess that's a GIF limitation rather than my not knowing how to edit the info in Bridge.
Thanks for looking into this.

Custom File Info Panel: Bridge Locks Up (trials, tribulations, woes)

o/ all!
So I've spent the better part of this morning trying (for what I think is the fifth time this year) to get a custom file info panel installed properly. I've managed to successfully install a generic panel with most of the properties that I'd like in the panel proper, however, I'm having no end of trouble publishing and installing the panels and having them display properly in Bridge CC (64-bit).
I've followed the instructions provided in the Programmer's Guide to the letter (yes, including the trust files), and I'm still having issues.
-- System Information --
OS: Windows 7 64-bit
Flash Builder 4.7 (64-bit)
Adobe Bridge CC (64-bit)
Right now, all I'm trying to do is:
Create the flash builder project for an XMP File Info Panel
Publish the file info panel
Confirm the file info panel was installed correctly in Adobe Bridge CC.
The process:
1. I create the new project in Flash Builder (I've attempted using the 4.6.0 and 3.6A flex SDKs).
Now, at this point, I'm simply attempting to confirm that everything is hunky-dory with the installation process before I start converting my generic panel into a flash/flex panel; so I'm not modifying any of the files that the wizard created.
2. Right-click the root project folder in the leftmost pane in Flash Builder, select XMP>Publish.
3. Locate the published panel's output directory that Flash Builder published to
4. Copy/paste the published panel's root directory to the following directories:
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\
I put the panel definition in all of these folders as per various 'fixes' to what I think my issue is that I've discovered while google-troubleshooting.
5. Create a trust file in FlashPlayerTrust folder with the name testPanel36A.cfg (contents listed below):
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\testPanel36a.swf
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\testPanel36a.swf
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\testPanel36a.swf
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\testPanel36a.swf
As far as I know, I can put multiple paths in these .cfg files, but I'm not-at-all confident that this is, in fact, the case.
After all this, I fire up bridge, right click an image file, and select FileInfo. The dialog displays fine, and the panel tab appears on the right. Clicking on the panel reveals nothing but a gray area with no content, and Bridge locks up entirely. I can't cancel out of the dialog, and end up having to end the process from Task Manager.
My gut tells me that I'm doing something wrong with the trust files, as this seems like the issue that most closely resembles what I'm encountering. Secondarily, It may be the flex SDKs -- I only have the 4.6.0 and the 3.6A SDKs, and the link in the Flash Builder dialog takes me to the sourceforge page for Adobe, and from there, I cannot locate any additional older SDKs to try this with (I've seen posts around saying that people got their panels to work with 3.0, or 3.5).
Anyone have ANY insight on this? Seriously at my wits end -- I've tried everything but nothing seems to work . Many thanks,
.e

Hi The_Mumm,
     You need to correct content fo the .cfg file (hope your .cfg file is at correct directory i.e. C:\Documents and Settings\<user name>\AppData\Roaming\Macromedia\Flash Player\#Security\FlashPlayerTrust). Yes, I agree that you have followed the documentation and put the path upto .swf file.
    Could you please modify the content of the trust file, with the below content (you path have been modified)
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\
C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\panels\testPanel36a\bin\
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\4.0\custom\testPanel36a\bin\
Hope everything will work now. If it doesn't work, please put only one path in trust file e.g. "C:\Users\Erik\AppData\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels" and put the publish panel in this folder.
One more precaution, don't copy, if required move the custom panel from one place to other.
Please let me know if you still faces any issue. Enjoy you new year.
For your reference, I am following the following steps and everything is working fine
1. Open the Fb7,
2. file->new->project
3. in the new project wizards, select "xmp->custom panel wizard"
4. xmp->publish custom panel
5. Open the .cfg file and added the path (C:\Users\<user name>\appdata\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels) where my panel has got published.
6. Ran Bridge CC, panel is there and working fine.
One more variations I did is, moved custom panel from C:\Users\<user name>\appdata\Roaming\Adobe\XMP\Custom File Info Panels\4.0\panels to C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)\Custom File Info Panels\4.0\panels (the location of the custom file info panel inside bridge).
      For you doubts I tried with flex SDK 3.3A and 3.6a both worked fine. As in forum you have written that you don't have any other sdk. If you like please go on the following links for older SDKs "http://sourceforge.net/adobe/flexsdk/wiki/Download%20Flex%203/"
-Sunil

XMPComboBox and XMPDateField probems in File Info Panel

Hi,
I have used Flash Builder 4 with the XMP FileInfo 4.4.2 SDK to build the example Custom File Info Panels.
None of the examples worked using the Flex 3.5 or 4.0 SDKs (blank panels in photoshop).
The example panels build and show in CS4 when I configure Flash Builder to use the Flex 3.0.2 SDK(last stable build of 3.0) .
The panels create and show usable XMP metadata but dropdowns combo boxes don't work and neither does the popup calendar on the date field.
The panel I have to build will require functioning Comboboxes and Popup calendars.
Can you let me know if there is anything I can do to resolve this issue?
I would switch to using CS5 but my company is using over 2000 CS4 licenses.
Thanks,
Paul.

Hi Stephan,
1. I'm on Windows 7.
2. I installed the precompiled examples like this:
copy \XMP-FileInfo-SDK-4.4.2\samples\panels\BasicControlSamplePanel directory to :
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\2.0\panels\BasicControlSamplePanel
The ComboBox dropdown and DateField calendar pop-up works fine in the CS4 photoshop fileinfo panel.
Here's the problem:
I also built the panel in Flash Builder 4 by importing this directory
\XMP-FileInfo-SDK-4.4.2\samples\panels-src\BasicControlSamplePanel
I downloaded 3.0.2 Flex SDK , configured FB4 to use it and chose "Use a specific SDK:" 3.0.2 in the Flex Compiler section.
I changed the runnable Flex applications to use src\examples\BasicControlSamplePanel.mxml
I left the rest of the project properties at default.
I ran an Export release build.
I copied the \target directory to :
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\2.0\panels\BasicControlSamplePanel
I copied the \bin-release\BasicControlSamplePanel.swf file to :
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\2.0\panels\BasicControlSamplePanel\bin
In this case ComboBox dropdown and DateField calendar pop-up DON'T work in the CS4 photoshop fileinfo panel.
I have built all the other samples similarly in the SDK and their dropdowns and comboboxes don't work either!
I couldn't find a FileInfoFoundation.swf file but I did find a FileInfoFoundation.swc file - where would i get a FileInfoFoundation.swf file?
I wasn't sure what you meant , so I copied FileInfoFoundation.swc to :
C:\Program Files (x86)\Common Files\Adobe\XMP\Custom File Info Panels\2.0\panels\BasicControlSamplePanel\bin
It didn't make a difference!
Is there something I'm missing or something else I need to do?
Thanks for your help on this.
Paul.

File info Panel doesn't show up in CS6 apps

Similar Messages

Maybe you are looking for