File information in Elements 9

I can see file info from my D200 in ViewNX2.  After I convert the NEF file to JPEG, I can still see the file information.  However, when I look at it in PSE9, the window comes up but there's nothing in it.  In order to close the window, I have to use excape.  Does anyone have a solution for this?  Thank you.

Hi,
File Info in Full Edit, I don't use the Organizer.  I don't have the Remove XMP marked.  The window opens, but it's completely blank.  I can still see the information in ViewNX2, but it's a little annoying to go back and forth.  I was wondering if it's because PSE9 doesn't work with the camera, My D40x information works fine in there, the D200 doesn't.  Thanks again!!

Similar Messages

  • Why is my File Information page blank in Photoshop Elements 13?

    I am trying to bring up the File Information tab in PS Elements 13... it comes up absolutely blank with a border around the box showing only the photo number across the top.  HELP!!!!  I need this page desperately and cannot access it.!

    Hi,
    Have you tried downloading Photoshop Elements 13 from here?
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    There is only one file to download - which one depends on your system (32-bit or 64-bit).
    These are the trial versions but will convert to the full version when you supply your serial number.
    Brian

  • How do I open my raw files in photoshop elements 12 editor-..my files convert to jpegs

    How do I open my raw files in photoshop elements 12 editor.  I have a MacBook. I use the iPhoto and move the files I want to work on into elements, but it converts the raw files into jpeg files.
    Thanks for your help!!!

    Are you opening the image directly from iPhoto? Right click & choose Edit in >> Photoshop Elements Editor
    This link is old but gives information on set up. It relates to PSE11 but the principle is the same. In iPhoto prefs you navigate to the editor application in the support files folder. Start from Finder by holding down the Alt (Optn key) and choosing Library.
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

  • How do i get flv files in premiere elements

    how can i get the premiere elements to use flv. files?

    verdanexi
    What version of Premiere Elements are you using and on what computer operating system it is running?
    In the absence of that information, the following is a generalized no can do answer.
    Although files with flv file extensions can be exported from Premiere Elements, you cannot import flv files into Premiere Elements.
    There used to be a time when earlier versions could use a Moyea plug-in to force Premiere Elements to accept flv files.
    how to edit .flv files
    Your flv are going to have to be converted into another format before import into Premiere Elements if you want to use Premiere Elements as your video editor.
    http://www.pazera-software.com/products/flv-to-avi-converter/
    The link is provided for informational rather than promotional reason. I have not used it, but I have seen reports that it is free and works well for flv to avi.
    ATR

  • How can i open a .prel file in premiere elements 11?

    Hello Community
    Yesterday i created a clip with premiere elements 11 and i saved it as .prel file.
    Today i wanted to open this file to go on working on my clip but i couldn't open the .prel file.
    When i try to open this file, my premiere elements 11 says that it doesn't support this kind of file or it's in a wrong codec.
    Maybe it is because I relocated the different clips i used for my video after i saved my project
    Can anyone help me out?

    nikank
    Maybe it is because I relocated the different clips i used for my video after i saved my project
    A very likely possibility that should be explored first. Please move the clips to exactly where they were when you
    imported them into the project. When you import your source media into a project, all you get in the project are copies of the
    originals. And, those copies need to trace back to the originals at the hard drive save location where
    they were when first imported into the project.
    Under the condition that you describe, even if the project did open, you should be greeted by several "Where is the file_____?" messages
    that you would have to deal for the reconnects.
    Other complications may be involved but let us start with the obvious one.
    Looking forward to your follow up.
    Thank you.
    ATR

  • File Upload UI element is not working properly inside Table Popin container

    Hi Expert,
    I created a table with popin, i placed file-upload UI element inside table popin contatiner.
    The file upload UI element is displaying properly but, when i click the browse button to select  the file, the file open dialog box is not popping out.
    will table popin support file-upload UI element inside it?
    it not is there any other way to call a file_open dialog box from inside the table popin.
    Thanks,
    James

    If you are on NetWeaver 7.01, you can try both the ACFUpDownload UI element or try creating your own FileUpload in Adobe Flex with Flash Islands.  ACFUpDownload requires the KPRO by default (which is why the same application isn't working for you), but you can write your own handler class to act as the KPRO receiver.  Here is an eLearning on the topic:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
    and source code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4
    If you want an eLearning on the FlashIslands approach, you can find it here as well:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d42644-91ef-2b10-228c-9e0ae75b274e
    and Source Code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f044b62c-90ef-2b10-64a6-9ec25294d133
    However in both of these approaches you still have to be careful with how you handle large files.  The problem is that they are processed often a single binary string.  This makes the processing easy, but requires total amount of session memory at least as large as the file being uploaded.  In NetWeaver 7.02 ABAP adds the concept of Streams and Locators to help with the partial processing of large files.  This feature doesn't come until later this year, but if you are interested you can learn about it here:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f983df-213e-2c10-ba89-b5a12ef178e8

  • How to open a .pse file in photoshop elements?

    Hello,
    All my previous files were saved as (.psd). Somehow, one of my photoshop elements projects was saved as a (.pse). I can't open it. How can I re open this file and continue working?
    Thanks in Advance

    A PSD is the standard working file for Photoshop.
    A PSE is a project file for Photoshop Elements. These projects are multiple pages. If you are working with a PSE on Windows, there will be a folder along side your PSE that contains a PSD file for each page of the PSE. If you are missing this folder, you won't be able to open the file. The PSE file itself is just instructions on how to open the PSD files as pages of a project. On Mac, all of these files are wrapped up in a single container.

  • Can i open eps file in photoshop element 12 and convert it into jpeg?

    can i open eps file in photoshop element 12 and convert it into jpeg?

    You can open it in Irfanview (free), then save as JPEG.
    Download the program here:
    IrfanView - Official Homepage - one of the most popular viewers worldwide

  • I accidently deleated file from the Elements organizor and from the hard drive. Can I get it back?

    I accidently deleated a file from the Elements organizor and from the hard drive. Can I get it back? How to do it?

    There's a good chance that you can if you haven't done too much work after deleting it.  Typically files are not actually wiped from the hard drive, rather the space they take is marked as free to use by another file if needed.  So if it hasn't been used by another file it can be recovered.
    Try this program...  it will help if you know where the images were stored.
    http://www.piriform.com/recuva
    Colin

  • I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

    I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the  PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and  it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Upload file without using file upload UI Element

    Hi all.
    I need upload a .txt file without using file upload UI Element because filename is not insert by user. The filename is generated by program. I try to use 'GUI_UPLOAD' and 'WS_UPLOAD' but don't work.
    Many thanks in advance.

    As you correctly pointed out we cannot use the gui_upload and gui_download fm's in webdynpro because they require sap gui and WD Components generally run in a HTML or Portal environment.
    The only option available is File Upload Element

  • Can not select a PDF file in the file uploader window after clicking the Browse... button for a file type input element.

    After upgrading to 5 (this worked in 4) I can not select a PDF file in the File Upload dialog that appears when I click the Browse button next to an HTML file type input element. The specific HTML element source code has the attribute: ACCEPT="image/*". I can select image files such as jpg, png, tiff, etc. But not PDF. This worked great in Furefox 4 and works in the latest version of Safari.
    The HTML code for the form element is:
    INPUT TYPE="file" NAME="file_1" ACCEPT="image/*" SIZE=35
    The File Upload dialog lists all files with PDF extension as dimmed and not selectable in Firefox 5.
    Can you help?

    Hi Purush
    Unfortunately we couldn't solve the problem. Our IT specialist checked it with SAP directly. SAP doesn't support the SAP KW solution anymore. Therefore we checked-in the document in ".doc"-Format.

  • File Upload in Web Dynpro ABAP not using File Upload UI element

    Hi all ,
    I have searching for a way to upload a file using the file open dialog ( or even by manually specifying the path/file name) without using the file upload UI Element in ABAP web Dynpro . The  File Upload UI element works for smaller files however with large file sizes 64 MB , the system seems to be running of memory (SYSTEM_NO_ROLL) . This is due to a known fact that the UI element makes a duplicate copy of the whole copy while it does the upload.
    I have been looking at the ACFUPDOWNLOAD as a way to solve this problem but cannot seem to figure out how it works , even the sample program  provided  by SAP does not work. I am working with a regular abap server and not kpro( knowledge mananagement provider)  or portal .
    Any help would be greatly appreciated.
    thanks,
    Ali.

    If you are on NetWeaver 7.01, you can try both the ACFUpDownload UI element or try creating your own FileUpload in Adobe Flex with Flash Islands.  ACFUpDownload requires the KPRO by default (which is why the same application isn't working for you), but you can write your own handler class to act as the KPRO receiver.  Here is an eLearning on the topic:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
    and source code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4
    If you want an eLearning on the FlashIslands approach, you can find it here as well:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d42644-91ef-2b10-228c-9e0ae75b274e
    and Source Code:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f044b62c-90ef-2b10-64a6-9ec25294d133
    However in both of these approaches you still have to be careful with how you handle large files.  The problem is that they are processed often a single binary string.  This makes the processing easy, but requires total amount of session memory at least as large as the file being uploaded.  In NetWeaver 7.02 ABAP adds the concept of Streams and Locators to help with the partial processing of large files.  This feature doesn't come until later this year, but if you are interested you can learn about it here:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f983df-213e-2c10-ba89-b5a12ef178e8

  • How to import pdf files in Premiere Elements 8

    Hello,
    I'd like to know if there's a way to import pdf files in premiere elements 8, becouse if I try to import it in "project" it gives me an error saying "this type of file is not supported".
    Thank you
    Sebastian

    Unfortunalty it's not working for me yet. If I try to import the PDF (single page)  into the project, the progress bar reach 100% but then says: "the file is not supported, or the required codec is not installed". I have Acrobat Reader 9.3 installed too.
    I've uploaded one of the PDF's that I want to use if you want to test it yourself:
    http://www.megaupload.com/?d=YB7NT4QR
    One of my coworkers says that I may need Adobe Bridge to do so, is that correct? Otherwise a simple "pdf to jpg" (or other image formats) could solve the problem.
    Thanks for your support.
    Sebastian

  • Having problems opening up a raw file in photoshop elements 11

    unable to open a raw file in ps elements 11

    The EOS 70D was first supported in Camera Raw 8.2 which is only compatible with Elements 12.
    You won't be able to open Raw files from the 70D in Elements 11.
    Options:
    Upgrade to Elements 12
    Free: download the free Adobe DNG converter, convert all 70D Raw files to DNGs then open and edit the DNGs in Elements 11
    Photoshop Help | Digital Negative (DNG)

Maybe you are looking for

  • Change login page and logout_url

    I created with apex 2.1 a new login page. How/where can I reset the login process to page 1 or page 101 ? Where can I edit which page corresponds with LOGOUT_URL ? In Shared Components > Security > Authentication Schemes > Change > Next I can see whi

  • I've the yontoosilentmacinstaller on my MAC. How the heck do I get rid of it?

    How can I get rid of Yontoo? It's driving me nuts!!

  • Authentication error weblogic workshop

    Hi , I am trying to debugg my application with weblogic workshop but its giving authentication error. My application is deployed and i can access it . I am using ant . Actually when i click the debug button it statrts the build and after successful t

  • Javascript conditional check

    Hi, See Javascript below. I'm trying to pop-up a warning message window conditionally if P410_BOARD_GROUP_TYPE_ID = 6 and the user selects a different value in the Select List. It seems ilke I am either A) passing in the value of P410_BOARD_GROUP_TYP

  • Error in storage location determination in VL02N for cross comapny stck trf

    Hi, currently we are doing intercompany stock transfer & after VL10B we are doing VL02N & we are getting an error "enter storage location cross company stock transfer". where as we have already define the storage location in OVL3 error message text m