"file is Corrupt" ?
I hav downloaded firefox's different versions frm different sites including official, but getting the same problem again n again that is "file is Corrupt" ? using win7. help
What security software do you have installed? try to disable it and then download again.
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.
Or, download from another computer, transfer the file to a thumbdrive, then install it on your PC.
Similar Messages
-
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I want to have firefox as my default browser. As this is a new laptop, I hasve to download firefox. As per the instructions, I click on "run" to complete the download, but instead of completing the download, a window appears which says that the author is unknown. If I ignore the window and click on run, I get another window which says the file is corrupt and I can't finish the download and have firefox as my browser.
I have windows 7 and explorer is the default browser and I want to change to firefox, but so far am being prevented from doing so. How can I successfully download firefox?It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also:
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
ITunes 6.0.1 for XP wont install, says installation file is corrupt -
Is this the same error as other people have been getting?
It says Installation file is corrupt, download a fresh copy and try again.
Same error.
This is happening on my friends windows XP machine, it happened on my dads,(problem solved, dont know how??? just d/l it and it worked when i was trying to fix it before i did anything) and on a work mates.
Today, because of this, he formatted his pc, and put everything back on. He tried to install iTunes as soon as he possibly could, no luck. deleted any trace it left, and installed SP 2 etc all the updates. Still no luck. Exact same error.hi Lee!
It says Installation file is corrupt, download a fresh copy and try again.
hmmm. this has been known to be caused by an nvidia firewall:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=813136
... but if that doesn't seem to be relevant, you could also try downloading from the "QT + itunes" site:
http://www.apple.com/quicktime/download/win.html
... or using a different browser for the download.
if no joy with that, we could also try cutting the Gordian knot:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=812538
keep us posted.
love, b -
I have tried it over and over from different links and I can not download and install and I can not figure out whyI have enough memory and I'm running windows vista my computer and virus protection are up to date. I have been trying to download firefox from google chrome and IE. I just don't understand why my computer keeps telling me that your file is corrupt when I know I downloaded it before and it was fine.
hello, the last version that was compatible with os x 10.4.11 is firefox 3.6.28 - you can download it from here: [http://www.mozilla.org/en-US/firefox/all-older.html]
[https://support.mozilla.org/en-US/kb/install-firefox-mac?s=installing&r=7&e=es&as=s#os=mac&browser=fx35 Install Firefox on Mac]
afterwards please disable automatic-updates in preferences > advanced > updates so that it doesn't happen again... -
I paid for and tried to download a song from itunes but the song won't dowload! When I got to store and click on available downloads it looks like it's downloading but I keep getting a message that the file is corrupt.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
I ordered a download of PagePlus X5 from Serif in the UK. The program is 706 MB. Several times, only 300+ MBs downloaded. The program had .exe but the partial download had .msi. The message that came up was "Setup was unable to find the msi package or patch . . ." Serif suggested I install Firefox as a web browser to see if the program would download. That is what I tried to do, and that is when I got the message that the file was corrupt. Serif is sending me a disk. Is there a disk for Firefox?
How large is your iPhone's storage? 16GB, 32GB, or 64GB? You can go to Settings > General > Usage, and that will tell you how much storage you have used and how much you have left. If the storage is truly almost full, then you would need to either delete files from your iPhone, or sync less files from iTunes to your iPhone.
Hope this helps! -
Says file is corrupt every time I try to install Firefox 3.6
Hi Raphe,
There are a couple of things I know that can cause this. One of which I have experienced myself.
Sometimes, your router may be faulty. This will usually effect all downloads unless they are very small files. I have experienced this myself, and found the only way to fix the problem is to replace it.
Another problem that could cause this is a virus. You should scan your computer for viruses using a trusted antivirus. The virus is sometimes scareware which claims you have a virus, but actually, the only virus is the scareware antivirus!
I hope this helps,
-Taddle -
Every time I try to open a project, I get the error that the file is corrupt
Every time I open a file, even an empty file everything workseat, but when I decide to save it and open it, Premiere Pro shows the following message:
"File could not be opened because the file is corrupt"
It does not matter what type of file I create, it could even be an empty project and it does not open. The weird thing is that if I save the file under a USB, it opens it without showing any errors.
Any help is appreciated.
Thanks.OK, so image being shown is this one:
-
last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
my iphone 3gs stopped working and i tried to restore it on itunes but it said a file was corrupt any suggestions?
What file did it say was corrupt? What error number? What is showing on your phone right now? What version of iTunes? What kind of computer?
-
Had Ubuntu 12.04 and upgraded to Ubuntu 14.04 and now when trying to open an MP3 audio link on a website that used to work, now I get an error message that says file is corrupt. Using Firefox browser that is up to date. What now? The file opens fine in Documents with VLC Player.
Please post the link so we can look it over.
-
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
'the preferences file is corrupt and has been reset to the default settings' - cs4 Mac
greetings!
every time i start illustrator i encounter a new error.
"the preferences file is corrupt and has been reset to the default settings."
"the corrupt file will be backed up as Adobe illustrator Prefs.err"
this problem manifested after i added some more .ai and .ase files to my swatches directory. i do not believe anything else changed.
not sure how to diagnose the problem. is there a debug mode or something? perhaps an offending file.
an option would be to try remove each added swatch file or folder individually, but this would be a very very time consuming process for me.
i use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.
thank you
-ss,
Every time you close down Illy, the current preferences (which may have been changed while you worked on files) are saved, and every time you start up Illy, those preferences will be used.
Usually, preference corruption probably occurs randomly, caused by the OS, but if something in your files change the preferences to something that is not viable you will get an error like that.
You may press Cmd+Option+Shift during startup, which will replace the current preferences with the defaults, and probably you will get rid of the error message. It is probably not a cure, though.
If the error is persistent, the cure would be to get rid of the offending things in the files you work with. -
File is corrupted error while creating excel using xml
Hi have created one excel file using XML code and sent it to mail as attachement. But when i open it, it displays error message - file is corrupted and cannot be opened.
below is my code - please review and tell what is wrong in it ASAP :
* Creating a ixml Factory
l_ixml = cl_ixml=>create( ).
* Creating the DOM Object Model
l_document = l_ixml->create_document( ).
* Create Root Node 'Workbook'
l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ).
l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ).
ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).
l_element_root->set_attribute_node( ns_attribute ).
ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ).
l_element_root->set_attribute_node( ns_attribute ).
* Create node for document properties.
r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ).
l_value = sy-uname.
l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ).
* Styles
r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ).
* Style for Header
r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ).
r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ).
r_format = l_document->create_simple_element( name = 'Font' parent = r_style ).
r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ).
r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ).
r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ).
r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ).
r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ).
r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ).
r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
* Style for Data
r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ).
r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ).
r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
* Worksheet
r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ).
r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ).
* r_worksheet->set_attribute_ns( name = 'Protected' prefix = 'ss' value = '1' ). " WORKING
* Table
r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ).
r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ).
r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ).
* Column Formatting
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '40' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '140' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '150' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
* Blank Row
r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
* Column Headers Row
r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ).
* RFQ No.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ No.' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Line Item No
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Line Item No.' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Material
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'Material' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Quantity
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'Quantity' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Order UNIT
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'Order Unit' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Delivery Date
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'Delivery Date' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Creation Date
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Creation Date' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Deadline Date
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Deadline Date' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Price
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
r_data = l_document->create_simple_element( name = 'Data' value = 'Net Price' parent = r_cell ).
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
** Login
* r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
* r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
* CONCATENATE 'Login - ' lv_date+6(2) '/' lv_date+4(2) '/' lv_date+0(4) INTO l_value.
* r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ).
* r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Blank Row after Column Headers
r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
* Data Table
LOOP AT it_final1 INTO wa_final1.
CLEAR l_value.
r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
* RFQ No.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
CLEAR l_value.
l_value = wa_final1-ebeln .
* CONDENSE l_value NO-GAPS.
r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ). " Data
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). " Cell format
* Line Item No
CLEAR l_value.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
l_value = wa_final1-ebelp.
r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ). " Data
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'Number' ). " Cell format
* Material
CLEAR l_value.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
l_value = wa_final1-txz01.
r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ). " Data
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). " Cell format
* RFQ QTY
CLEAR l_value.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
l_value = wa_final1-ktmng.
r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ). " Data
r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'Number' ). " Cell format
* UNIT
CLEAR l_value.
r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
l_value = wa_final1-meins.
r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cellHow to make a particular column non editable?
Make your style protected and pass that style name to your required column while passing data.
for example:
Find below the code for protection of a style.
Last two lines are very important.
* Style for Headert
r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ).
r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Headert' ).
r_format = l_document->create_simple_element( name = 'Font' parent = r_style ).
r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ).
r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#B2FF64' ).
r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ).
r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ).
r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Bottom' ).
r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ).
r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Border' parent = r_border ).
r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
r_format = l_document->create_simple_element( name = 'Protection' parent = r_style ).
r_format->set_attribute_ns( name = 'Protected' prefix = 'ss' value = '1' ).
Maybe you are looking for
-
GMA X3100 Macbook-Should I upgrade to Snow Leopard?
I've read all kinds of horror stories about this Graphics Card GMA X3100 and Snow Leopard. I see that SL doesn't support it. I'm running ok on 10.5.8. Should I upgrade or not? I'm mostly doing audio in Logic Pro and will be doing more HD video in iMo
-
Freeze issues while editing in elements 12
I am working on a template and every time I try to open a new file in to the editor I am freezing when the window pops up to select the file. This just started happening after the most recent update. Any help would be appreciated.
-
Hi all, Im working on SRM 7.0.Im trying to create a SC externally using the FM "BBP_PD_SC_CREATE". However,I get the following error : BUFFER TABLE NOT UP-TO-DATE. PLease let me know what Im doing wrong. BR, SRM Tech.
-
How to Delete exter.processed Open PRs
Hi PP friends, Can u pl. tell me how to delete PRs generated through externally process operation .Actually these are those PRs which have been either partially converted or not converted at all. But still in the system and now client wants to delet
-
I would like to back up iTunes
1. I want to back up iTunes on a memory stick. If I make an alias of it would that be the best way to do this? 2. Some songs I have in iTunes have an exclaimation mark next to it and can't play. How can I re-download them again without paying for the