File is damaged cannot be opened for HEBREW language

Hi,
I have a PDF file generated in HEBREW langauge it works fine in my development environment but when I open a file generated in Production environment I am getting the error "File is damaged cannot be opened".
Is there any special setting related to Reader/Acrobat for HEBREW langauge?
Need your help

How is the file generated?  How is the file transferred?  How is it opened in the new environment?  Is it still exactly the same (size) as the original?

Similar Messages

  • Nexus 5548UP Downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b fails -- SRG file not present/cannot be opened

    I am attempting to downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b for standards compliance.
    When following the ISSU steps for validation of the install all command I receive the following error on the following command:
    sh install all impact kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.2b.bin system bootflash:n5000-uk9.5.0.3.N2.2b.bin
    Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.2b.bin for boot variable "kickstart".
    [####################] 100% -- SUCCESS
    Verifying image bootflash:/n5000-uk9.5.0.3.N2.2b.bin for boot variable "system".
    [####################] 100% -- SUCCESS
    Verifying image type.
    [####################] 100% -- SUCCESS
    Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.2b.bin.
    [#                   ]   0% -- FAIL. Return code 0x404F0003 (SRG file not present/cannot be opened).
    I followed some recommendations from this post https://supportforums.cisco.com/thread/2108814
    reload to clear temp and cache
    show system internal flash
    checked md5sum of image
    I found this information http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/deferral/Deferral_Advisory_Notice_N5K.html
    I am unsure of how to upgrade when the steps to validate indicate a problem with the upgrade/downgrade.
    I still receive the error.
    Any help would be greatly appreciated.
    Attached are the steps done so far and outputs.

    I had already created a case with our reseller.  The engineer there had me reload the 5ks and attempt the show install all impact again.  When I did it was successful.
    I was able to then downgrade to 5.0.3.N2.2b.  I am currently working to duplicate the issue by going back to 5.1.3.N1.1.
    The engineer also stated that I was probably running into this bug:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw25835
    Here is the contents of the sh system internal flash and show system internal dir /var/tmp:
    Mount-on                  1K-blocks      Used   Available   Use%  Filesystem
    /                            409600     72564      337036     18   /dev/root
    /proc                             0         0           0      0   proc
    /post                          2048         4        2044      1   none
    /var                         409600     72564      337036     18   none
    /sys                              0         0           0      0   none
    /isan                       1536000    409628     1126372     27   none
    /var/tmp                     307200        72      307128      1   none
    /var/sysmgr                 1024000         0     1024000      0   none
    /var/sysmgr/ftp              409600        68      409532      1   none
    /var/sysmgr/ftp/cores        102400         0      102400      0   none
    /callhome                     61440         0       61440      0   none
    /dev/shm                     524288    126552      397736     25   none
    /volatile                    153600         0      153600      0   none
    /debug                        20480         0       20480      0   none
    /dev/mqueue                       0         0           0      0   none
    /debugfs                          0         0           0      0   nodev
    /mnt/plog                     49024      1300       47724      3   /dev/mtdblock2
    /mnt/cfg/0                   114909      4274      104702      4   /dev/sda5
    /mnt/cfg/1                   112920      4274      102816      4   /dev/sda6
    /var/sysmgr/startup-cfg      409600      2104      407496      1   none
    /dev/pts                          0         0           0      0   devpts
    /mnt/pss                     114917      5923      103060      6   /dev/sda4
    /bootflash                  1609984    779460      748740     52   /dev/sda3
                                                                    ./         640
                                                                   ../         240
                                                       bootloader_ver            0
                                               util_cli_history_admin           48
                                                                mysrg         1664
                                                        mcm_ascii.log         1019
                                                     m2rib_ascii.3248           68
                                                               arping          101
                                                            stp.log.1         3836
                                                             fwm1.out            0
                                                        cmp_slot_id.1            0
                                                               ntpd_1            0
                                                         ntp_client_1            0
                                                     ntp__libdapi.log            0
                                                     igmp_restart.log            0
                                                     radius_debug.log          232
                                                          cfs_mac.log          166
                                                           climib.log         1416
                                                              lcc.log          694
                                                      security_stderr           77
                                                      security_stdout            0
                                                        aaa_debug.log          519
                                                   security_debug.log          647
                                                            evmc.3005           31
                                                           idehsd.log          602
                                                            mvsh.3000            0
                                                            lockcisco            0
                                                              .flexlm/          60
                                                                 logs@          20
                                                      first_setup.log         2981
                                                      boot_uptime.log           56
                                                                  vsh/          40

  • My files on pages cannot be opened, when I click on them appear" file impossible to open". All is.saved.on iCloud and iCloud drive and on my devices is the same

    My files on pages cannot be opened, when I click on them appear" file impossible to open". All is.saved.on iCloud and iCloud drive and on my devices is the same
    All iCloud systems works properly, also  WiFi and devices and the system
    Help me please

    hi there,
    try booting into safe mode, by pressing the Shift button once you hear the startup sound.
    Hope this helps,
    Chris

  • The Downloads folder's icon had changed to an file icon ,and cannot be opened.

    IN my Finder ,the Downloads folder's icon had changed to an file icon ,and cannot be opened. when i open it's info window,In the Sharing & Permissions section,  it shows that you have unknow permision. i don't know what i had done before it changed .perhaps the FTP settings?or files Sharings? how can i restore it to the default setting?

    this is the "Get Info" window.

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Error: File "x.avi" cannot be opened (86::1)

    I've started using a new camera to record some footage and it saves videos in an .avi format with the H.264 codec.
    Everytime I try to import footage from the camera I get an error message saying 'After Effects error: File "X.avi" cannot be opened, it may be in an unsupported format ( 86::1 ).
    I use After Effects CC and this problem has never occured before. I have tried videos with both 1920x1080 and 1280x720 resolutions and the error still comes up. Converting the footage to another format works but slightly lowers the frame rate and sometimes messes up audio.
    Please Help

    Todd_Kopriva wrote:
    Can you play these .avi movies with this H.264 variant using media players on your computer, such as QuickTime Player or Windows Media Player?
    I can play them on all media players except from Quicktime which doesn't usually support AVI playback.

  • Internationalization for Hebrew language

    hi,
    I made an application, internationalized to be used with some different languages.
    Til now I internationalized it only for languages that have Latin letters (ISO/IEC 10646-1)
    and in this way it is working fine...
    Recently I had a request to put it in Hebrew language, that doesn't use Latin characters.
    Reading the documentation, I implemented the localization for the Hebrew language in the
    follow way:
    Someone wrote the words in Hebrew characters inside a property file (file_iw_IL.properties) ,
    afterwards I transformed the Hebrew characters in the UTF-16 mode "\uxxxx", using the
    native2ascii tool that come with jdk ....
    But when the application for the Hebrew language run, it didn't work...
    I should like to know if the procedure that I did for Hebrew
    internationalization is right and, if is not, I would like to know what is the right precedure
    to make internationalization for languages that don't have Latin characters.
    thank you in advance for a kind help
    regards
    tonyMrsangelo

    No one answer me so I try again for some help, explain better my problem.
    I use this class to get strings in different languages:
    public class SupplierOfInternationalizedStrings {
        Locale localUsedIt;
        Locale localUsedEn;
        Locale localUsedHe;
        Locale localizedCurrencyFormat;
        Locale localUsedHere;
        public SupplierOfInternationalizedStrings() { // constructor
            localUsedIt = new Locale("it", "IT"); // specifica il file appartenente alla famiglia
            localUsedEn = new Locale("en", "US"); // specifica il file appartenente alla famiglia
            localUsedHe = new Locale("he", "HE"); // specifica il file appartenente alla famiglia
        } // constructor
        void setInternationalizationCountry(String langToUse) {
            if (langToUse.compareToIgnoreCase("Italiano") == 0) {
                localUsedHere = localUsedIt;
                localizedCurrencyFormat = new Locale("it", "IT");
            } else if (langToUse.compareToIgnoreCase("English")  == 0) {
                localUsedHere = localUsedEn;
                localizedCurrencyFormat = new Locale("iw", "IL");
            } else if (langToUse.compareToIgnoreCase("Hebrew")== 0) {
                localUsedHere = localUsedHe;
                localizedCurrencyFormat = new Locale("iw", "IL");
           System.out.println("linguaggio impostato = " + localUsedHere);
        } // initializeInternationalization()
        public String getInternationalString(String keyForTheWord) {
            ResourceBundle resourceBund = ResourceBundle.getBundle("properiesFile", // il nome del file .properties... la famiglia dei files
                    localUsedHere);
            String word = resourceBund.getString(keyForTheWord);
            return word;
        } // getStringForMedidentStartClass()
    } // class SupplierOfInternationalizedStringsOf course I have a file.property iw_IL - Hebrew (Israel) where for each key there is a value wrote with hebrew characters
    the hebrew file property look in this way:
    keyForLabel1= ה עברית מילה שתימ \n
    keyForLabel2=ספה עברית מילה שתימ The class SupplierOfInternationalizedStrings works for the translation in english and in other languages that use latins letters ..,
    but when it is setted for be used with the Hebrew language ( localUsedHere = localUsedHe)
    the metod getInternationalString() don't return Hebrew words.
    This didn't worry me, because I read in the documentation that properies file cannot
    read characters that are different from latine... and I also learned that in this case it need to convert the letters
    in Unicode format...
    I made this work putting the hebrew words in an .rtf file and, using native2ascii utility
    with the command native2ascii -encoding UTF8 file.rtf textdoc.txt, I got the unicode format.
    Now the file property for Hebrew language looks in this way:
    keyForLabel1     =       \u00d4  \u00e2\u00d1\u00e8\u00d9\u00ea...
    keyForLabel2     =       \u00e1\u00e4\u00d4  \u00e2\u00d1.....At this point I expected the translation in Hebrew comes good... but instead I still I cannot get the Hebrew words..
    I should like to know why the elaboration still doesn't works
    and I would have too some help in order to do the program works good.
    thank you
    regards
    tonyMrsangelo

  • Archive file cannot be opened for write program

    Hi All,
    I am getting the error message "annot be opened for write program" in log view, when I am trying to write data into archive file using "write' function.
    Please provide us the solution for this problem.

    Hello,
    It must be due to missing authorization for the write operation.
    Please inform the security consultant along with SU53 details.
    Regards
    Vijay Gajavalli

  • Files in Pages cannot be opened on my Mac Mini

    When I try to open a file in Pages on my Mac Mini, I get a message that the file cannot be opened.  I can open all files on my iPad.  And until today, I could open all files on my Mac Mini.  The only thing that I did today was to sync the 2 devices.  How can I get my Mac Mini to open my Pages files?

    8 chips on each side. So they are 16.
    It looks like this one: http://www.eio.com/p-36675-super-talent-w1333sb4gm-ddr3-1333-sodimm-4gb-micron-c hip-notebook-memory.aspx

  • File Movement: [IPT_TaskFailed] cannot be completed for FileAgent

    Hi
    I working on EDI X12 File Transfer Protcol.
    I have given the location of the fodler where B2B has to pick the file from and where it has to move teh file to for archive.Both the folders are given complete permissions.
    It is giving me the below error. The file is not getitng deleted from teh pick up folder.
    Could you please tell me what can be teh problem
    (DEBUG) Moved file TF_CRX_TF00025304TXT.TXT in //db10100/app/oracle/rxspt1/apps/VITRIA to      /db10100/app/oracle/rxspt1/apps/VITRIA/Archive
    2009.07.05 at 16:59:36:373: Thread-17: (DEBUG) FileList: CurrentTime=Sun Jul 05 16:59:36 CDT 2009, LastModifiedTime=Thu Jul 02 04:25:31 CDT 2009
    2009.07.05 at 16:59:36:373: Thread-17: (DEBUG) [IPT_FileRecMonitorProcessFile] Processing file TF_CRX_TF00025304TXT.TXT in transport layer.
    2009.07.05 at 16:59:36:374: Thread-17: (DEBUG) Conversion of file TF_CRX_TF00025304TXT.TXT to TransportMessage is completed.
    2009.07.05 at 16:59:36:506: Thread-17: (DEBUG) Move file to archive      /db10100/app/oracle/rxspt1/apps/VITRIA/Archive
    2009.07.05 at 16:59:36:506: Thread-17: (DEBUG) FileSourceMonitor.moveFile(MessageOrigin): begin to move TF_CRX_TF00025304TXT.TXT in //db10100/app/oracle/rxspt1/apps/VITRIA to      /db10100/app/oracle/rxspt1/apps/VITRIA/Archive
    2009.07.05 at 16:59:36:506: Thread-17: (DEBUG) [IPT_TaskFailed] Move TF_CRX_TF00025304TXT.TXT from //db10100/app/oracle/rxspt1/apps/VITRIA to      /db10100/app/oracle/rxspt1/apps/VITRIA/Archive cannot be completed for FileAgent.
    Could you please tell me what can be the problem?
    Regards,
    Praveena
    Edited by: Praveena Paruchuru on Jul 7, 2009 12:08 AM

    Thanks Anuj.
    I resolved it by importing the configruation again.
    If I see the logs, the Archive path is having some space infornt of the path. Because of which it is not recognizing the path. May be because of some some extra character which came in the config xml for the Archive path.
    After thar when I saw it is working, there is no space infront of the archvie path in the dc_transport logs.
    Regards,
    Praveena.

  • My download was an unknown file type and cannot be opened

    my download was an unknown file type and cannot be opened

    Sounds like the file extension was dropped when you saved your converted document.  Make sure that the .docx (Word) or .xlsx (Excel) extension appears after your file name when saving your document.
    You should be able to rename the document you already converted by adding the appropriate extension.  The file should then open as expected.
    Let us know how it goes!
    -David

  • SAPSCRIPT for Hebrew language

    Hi Experts,
        I have created one sap script with hebrew language data in text element for main window.
    I want to add english words in the same text element while getting the output it is taking differently...
    example: i typed "data communication procedure"
    the out is coming as communication data procedure.
    Please help for this issue...
    wat exactly happening. in this..
    Thanks,
    Prashanth

    Hi,
    first check it in different clients whether everywhere(Dev client and Testing Client ) its the same way as you wanted,it may happen that in the Testing client its in the other way,
    secondly check if any translations are maintained by Transaction se63 and in that is it the other way.

  • Getting junk character while creating PDF image for Hebrew language

    Hi,
    I have a issue while creating PDF image for invoice in Hebrew language . I can able to create a PDF image but it' showing junk characters instead of Hebrew characters.
    Please provide your inputs to resolve this issue.
    Thanks,
    Joy.

    Hi ,
    I am also facing similar problem.My system is unicode enabled and i am using the device type I8SWIN and courier font .
    But still i am getting junk characters for Hebrew characters in PDF.
    Can any one suggest me what is the exact device type we have to use for unicode enabled system and also for non unicode enalbled system.
    Is any related to truetype font here .Kindly let me know .
    Thanks for your valuable inputs .
    PRadeep....

  • .DNG files are damaged, can not open. Now what?

    I have many files I had converted to .DNG from Nikon .NEF some time ago. When I try to open them now Photoshop says they are damaged. I have tried opening them in other programs (Mac Preview, Graphic Converter) but no luck. Is there anything I can do? I do not have original Nikon .NEF files any more.

    If you are using Windows, you should know that Windows keeps "Shadow copies" of files.
    The best way to access them is by using "Shadow Explorer" free of charge.
    This only applies to files kept on your C or D drives, not SD cards or external drives.
    You may even find the old NEFs if you are allowed to go back far enough.
    ShadowExplorer.com - About
    For Macs, it would be Time Machine.
    Hope that helps,
    Gene

  • Workflow created documents gets error "File ... cannot be opened because there are problems with the contents"

    I have a list that when an item is changed a workflow kicks in and checks if certain fields are checked. Depending on which field word and excel documents are created in another document library.
    Now this worked perfectly in my Sharepoint 2010 environment, but after moving the site to Sharepoint 2013 this particular workflow doesn't seem to work anymore.
    I've tried to create the whole thing from scratch but still the same issue.
    The issue is the same even if using the default content type, or trying to open the document using Explorer view. I've also tried recreating the function in a different site without 2013s visual upgrade without any luck. It's like something have changed
    in the architecture.
    So does anyone have an idea to why workflow created documents don't work anymore?

    I don't think the issue lies with SharePoint. Do you still have your 2010 environment around so that you can test and see if the issue appears? Seems to me that the Word global template has got corrupted. I have faced this issue in the past but that was
    under entirely different circumstances. Anyhow, I renamed the normal.dotm file and it helped resolve my issue. I am not 100% sure if it will work for you as well, if you want you can give it a try.
    Refer to the below link:
    http://support.microsoft.com/kb/918429
    Exit Word.
    Click Start
    Collapse this imageExpand this image
    In the Start Search box, type the following text, and then press ENTER:
    %userprofile%\appdata\roaming\microsoft\templates
    Right-click Normal.dotm, and then click
    Rename.
    Type Oldword.old, and then press ENTER.
    Close Windows Explorer.
    Start Word, and then open the document

Maybe you are looking for

  • IMovie Text Options

    I am working on a new macbook at work, and am starting my first movie (iMovie 11, I guess).  I have inserted a Title slide into my movie, and when I go to adjust the text, it won't let me into any font (or other) options.  It'll show me what font it

  • How to put Nested List in HTMLDocument  in JTextPane(JEditorPane)

    How to put Nested List in HTMLDocument in JTextPane(JEditorPane). I was trying to put nested Bullets and Numbering but found that not enough support is provided for it. The HTMLEditorKit behaves abnormally. There are two ways to do that: 1) just extr

  • How to unlock process template in BPF

    Hi all, Hope all are doing good. I want to unlock a process template in bpf,previously it was locked by someone else. Version bpc10 sp17 Can anyone one help me?? Thanks, kiran.

  • Transforming XML source to (X)HTML StreamResult outputs long comment

    Hi, I'm using javax.xml.transform.* to transform XML data into an XHTML page. The XML data represents a document (contains information about headers, paragraphs, related pages, etc.) and an XSL file is used to properly transform that data into an XHT

  • FIM Licensing and Installation

    Hi, I'm sorry  for this stupid question but I have a doubt. Until now I worked in a test environment with the trial version of FIM 2010 and I didn't use any license. Now the trial version is expired. My organization bought licenses and I would like t