File is not comming to target system

Hi guru,
i did the file to file scenario as per the Srinivas Vanamala blog.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
My file is picking from source folder. i am not able to get any thing to the target folder.
will u any of u are able to help me out.
Thanks & Regards,
Lakshmi...

Hi Khan,
I changed role of BS as Integration Server.
With this link
http://xitraining:8000/sap/xi/engine?type=entry
i got this code.
<b>SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received. No message processing possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
</b>
will u plz let me know what i need to do.
Thanks & Regards,
Lakshmi....

Similar Messages

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

Solution Import Failure Message: Cannot add a Root Component 'GUID' of type 29 because it is not in the target system

Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..

I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component

CUA roles sometimes do not match the target system

Hi,
We are using CUA on Solution manager to assign roles to our different systems. Every now and then what is in CUA does not match the target System.
I know that you can look at the idocs using WE05 and see what the root cause was, fix it and then re-assign the role.
The problem is that when you assign the role using CUA, it doesn't warn you that the transmission failed on the target system.
We just went live last week, so I am added and removing roles from many different users using SU01 and SU10 and I do not think it is a valuable use of time to sift through the idoc logs every time I make a change. Especially, since most of the time it works.
Is there a better way to monitor the Idoc logs? Can you have it send a notification (email for example) when there is an error? Is there a better process then WE05?
Thank you in advance for the help!
Neil

Neil. It was a long time I played around with CUA. But I am remembering some transaction where you had the logs. Think it is SCUL.
I searched saphelp and got the following hits for you:
http://help.sap.com/saphelp_nw70/helpdata/EN/c1/db4063fd3111d5997a00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/cc/50b43be7492354e10000000a114084/frameset.htm
Best of luck to you!
Regards Fredrik

Term of payment does not exist in target system

Hi Gurus,
Scenario: Classic, Self service procurment.
I made a shopping cart with my requirements.
PR and PO created in the backend system.
Posted the GR in SRM....and got the message of posted in the backend.
Posted the invoice in the SRM and message creation completed and found that it has not been posted in the backend (checked the PO history).
The message found in SRM SLG1...."Term of payment does not exist in target system" for that.
Checked the vendor conditions and found that terms of payment exist in the backend system for that vendor.
What could be the problem and how to resolve this issue?
Thanks in advance
SG
Message was edited by:
SRMGUY

Hi,
I am new to SRM.
We have created new payment term in ECC and replicated to SRM using BBP_UPLOAD_PAYMENT_TERMS. We are able to see in table BBP_PAYTERM and BBP_PAYMENT_TEXT.
But the non of the payment terms are reflecting into PO in SRM after this.
I am able to see the payment term in backend in BBP_PD. I am getting the below warning message when I click on Check Button.
'Term of payment does not exist in the target system'.
What could be the problem and how to resolve it?
Thanks in advance.
Best Regards,
Siddappa

I had to restore my iPad recently and in opening Pages again found that even though I synced my iPad and backed it up my files did not come over to the restored iPad. Is there any way of recouperating them? Thanks!

I had to restore my iPad recently and in opening Pages again found that even though I synced my iPad and backed it up my files did not come over to the restored iPad. Is there any way of recouperating them? Thanks!

working files aare not backed up as far as I know. You must either 1)"copy to itunes", then use itunes to save as... to your desktop machine. Or 2) use iCloud to keep the docs.
I also learned this the hard way. No way i know of to get the working docs back.
Jason

My client requirementis: same file name should be in target system

I am getting one file from source system the file name is empdetails.txt. I want to pass the same file name to the target system how we can implement this requirement.

The below blog will also useful
XI: The same filename from a sender to a receiver file adapter - SP14
you can also refer to SAP Note 821267 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 / PI 7.3 File Adapter
regards,
Harish

JDBC-RFC no errors at XI BOX still records were not update at Target system

hi
am doing jdbc to rfc scenario
tested rfc at target R/3 and its working fine,but records were not being updated in jdbc-rfc scenario.
i can see the audit log as success but no record is inserted at the target system
think problem is at FM.
please look at my FM code.
FUNCTION zscp_fm_inb_task_act_eff_updat .
""Local Interface:
*" TABLES
*"      IT_TASK_DATA STRUCTURE ZSCP_S_TASK_EFFORT
DATA : v_taskguid TYPE bapi_ts_guid-task_guid,
         is_task TYPE bapi_ts_task,
         is_task_upd TYPE bapi_ts_task_upd,
         is_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
*DATA : BEGIN OF it_data OCCURS 0,
        project TYPE zspr_project_id,
        task_id TYPE cgpl_entity-external_id,
        act_work TYPE dpr_tv_act_work,
        guid TYPE dpr_task-guid,
      END OF it_data.
DATA : BEGIN OF it_task_eff OCCURS 0,
           project TYPE zspr_project_id,
           guid TYPE dpr_task-guid,
           act_work TYPE dpr_tv_act_work,
         END OF it_task_eff.
DATA : BEGIN OF it_report OCCURS 0,
           msgtype(1),
           project TYPE zspr_project_id,
           task_id(24),
           msg(250),
         END OF it_report.
DATA : l_taskguid TYPE dpr_task-guid.
DATA : v_begintmstamp(20) TYPE c,
         v_endtmstamp(20) TYPE c.
*ranges : r_taskguid for l_taskguid.
DATA : v_tabix TYPE sy-tabix.
DATA : it_dpr_task TYPE STANDARD TABLE OF dpr_task,
         wa_dpr_task TYPE dpr_task.
*data : l_taskguid type BAPI_TS_GUID-TASK_GUID.
DATA : flg_no_flg TYPE c.
DATA : l_task(24),
         flg_error TYPE c.
DATA : l_taskdetail TYPE bapi_ts_task_detail,
         l_retdetail TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
DATA : v_count TYPE i.
DATA curr_date TYPE sy-datum.
DATA curr_time TYPE sy-uzeit.
CONCATENATE sy-datum sy-uzeit INTO v_begintmstamp.
DELETE it_data WHERE act_work < 0.
DELETE it_task_data WHERE act_work_effort < 0.
IF it_task_data IS NOT INITIAL.
LOOP AT it_task_data.
   v_tabix = sy-tabix.
   CALL FUNCTION 'CONVERSION_EXIT_DPRCE_INPUT'
     EXPORTING
       input = it_task_data-task_id
     IMPORTING
       output = it_task_eff-guid.
   it_task_eff-guid = it_task_data-task_id.
   it_task_eff-project = it_task_data-project_id.
   it_task_eff-act_work = it_task_data-act_work_effort * 60 * 60.
   MODIFY it_data INDEX v_tabix.
   APPEND it_task_eff.
   CLEAR: it_task_eff, it_task_data.
ENDLOOP.
    LOOP AT it_task_data.
      it_task_data-act_work_effort = it_task_data-act_work_effort * 60 * 60.
      MODIFY it_task_data.
      CLEAR it_task_data.
    ENDLOOP.
    SELECT *
        FROM dpr_task
        INTO TABLE it_dpr_task
        FOR ALL ENTRIES IN it_task_data
        WHERE guid = it_task_data-guid.
*Begin Commented by Aparna/25/01/2007 so that all the tasks are updated irrespective the planned efforts are filled or not.
       and
            work_effort > 0.
*End
IF sy-subrc <> 0.
   MESSAGE e000 WITH 'No data selected to update'.
ENDIF.
    IF sy-subrc = 0.
      curr_date = sy-datum.
      curr_time = sy-uzeit.
      LOOP AT it_dpr_task INTO wa_dpr_task.
        CLEAR it_task_eff.
        READ TABLE it_task_data WITH KEY guid = wa_dpr_task-guid.
        IF sy-subrc = 0.
          wa_dpr_task-act_work_effort = it_task_data-act_work_effort.
          wa_dpr_task-act_work_unit = 'S'.
          wa_dpr_task-zzupdated_date = curr_date.
          wa_dpr_task-zzupdated_time = curr_time.
          CLEAR wa_dpr_task-flg_man_rem_work.
          MODIFY it_dpr_task FROM wa_dpr_task TRANSPORTING act_work_effort act_work_unit flg_man_rem_work zzupdated_date zzupdated_time.
        ENDIF.
        CLEAR wa_dpr_task.
      ENDLOOP.
      DESCRIBE TABLE it_dpr_task LINES v_count.
    ENDIF.
ENDIF.
IF it_dpr_task IS NOT INITIAL.
*{17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task SET act_work_effort = 0
    WHERE version_number EQ space.
*}17Sep2007 Refresh all tasks before updating the efforts
    UPDATE dpr_task FROM TABLE it_dpr_task.
ENDIF.
ENDFUNCTION.

Not exactly an ABAPer but I dont see a commit work in the FM. Maybe this is an issue
Regards
Bhavesh

Setup.exe file can not by accessed by system

OS is WinXP Home SP3. When either installing complete all-in-one software from disc or downloaded rw2_021_w02_enu.exe, the install stops when trying to access Setup.exe "The File Can not Be Accessed from the System".Does anyone have a solution to this issue?

Hi , and welcome to the HP Forums! I see you are having software errors. I would like to help! I would recommend removing the ink cartridges from the printer, and perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar. I would then suggest Uninstalling the Printer Software. Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows. Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

Pdf file will not come up properly

Dear Sirs:
My daughter sent me her w-2 and 1099's through the IPHONE, and one of them did not come through properly. The pdf came through, but it was blank.
When I went to my laptop PC and downloaded the 1099 it came up correctly with infomation inside the boxes. But it came out blank with either the Iphone or IPAD2.
I think there is a problem with the pdf add in inside the OS 5.01, because later I was experimenting and had downloaded a free PDF app, and opened the 1099 in that, and it was NOT blank. There were information inisde the boxes, but the boxes were blue.
So please fix this bug. Thanks.
Ken Basche

works ok for me, although I do seem to recall a thread about this, and a fix - registry setting or preference or something maybe...
At the risk of hijacking your thread, if this is a known problem with a known fix, it would seem ripe for the "known issues" page. I think one reason Adobe does not have such a page is they've depended on this forum for such stuff, which if you're willing to slog through a bunch of unrelated stuff and/or misinformation, has a wealth of knowlege. Likewise, there are a bunch of unpaid Lightroom enthusiast idiots (I was hoping I could get away with that since I consider myself one of them) who hang out on this forum just to help people like you...
Sorry if I didn't help much this time...
R

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

External files are not deployed to target

I am trying to follow the example in this post where the user specifies a folder in the build specification that has non-LV files. It contains HTML files that are to be deployed with the project. It seems to me like a good idea to keep any HTML and JS files with the LV code that they interact with. When I deploy the project, however, I see that the HTML and JS files are unpacked to /tmp/webservices/userservices/deployed/control-2C7CC494-343D-11DF-811F-00802F112BC5/data on my cRIO. When I browse to the cRIO, however, I am not served the files since they are not located in the /ni-rt/system/www directory. Is this a bug in LV or my misunderstanding of the feature?
Solved!
Go to Solution.

Found the solution. The target does not have to be in the /ni-rt/system/www directory. Carefully following the instructions at http://zone.ni.com/devzone/cda/tut/p/id/7747#toc15 provided the solution.

End Routine and test on a field not present in target system

Hello,
I find an issue in testing a field present in the ODS source system, using a Transformation.
More exactly, I do not have a field that I need to test in my end routine because I can't find it in the RESULT_PACKAGE structure (because it is not present in the target Cube). In BW 3.x I solved this problem with an enhancement in the communication structure of my ODS and using a start routine.
Any idea for a Transformation?
Many thanks in advance for your kind support.
Regards,
Giovanni

Hello and thanks for your reply.
I have two conditions to implement.
1) Fill some fields of the Cube, NON present in my ODS.
2) Condition on one filed of my ODS (filed NON present in the Cube) for filling some field of the Cube.
In my tys_SC_1 structure of the start routine I find all fields of my ODS and the fields that I need to check but I need to check this filed in one point of my process and set a filed in my Cube (filed not present in my ODS), not present in the tys_SC_1 structure of the start routine.
I hope to have described in a better way may issue.
Any idea?
Thanks.
Giovanni

Application does not run on target system

Hello, This is my first attempt at using this forum & creating a LV standalone application and I have encountered a brick wall.
I have created a simple VI to display some T/C readings that runs fine on the (LV prof 8.5) development system, but not on a different target PC.
The target PC does not have LV installed, just DAQ-MX software for Windows V8.6
The DAQ hardware is a SCXI-1000 chassis with SCXI-1600 USB interface, taking data with SCXI 1102. I am using the same hardware on both
the development PC and the target PC. The DAQ hardware works correctly on the target PC (using MAX). My application loads, but just does
not run on the target pc.
Solved!
Go to Solution.

Hello André
I am not sure. On my last attempt, I had included "additional installers" Run-Time Engine(s) 8.0.1, 8.2.1, and 8.5.1.
The application seems to load. The screen looks normal, it just doesn't seem to acquire any data (although it appears to be running).
The VI is very simple. I have attached it (didn't realize I could do this before). I hope this answers your questions.
Thanks,
Bob
Attachments:
thermo2.vi ‏250 KB

I cant seem to uninstall ClamXav, I got it off the app store it did not come on the system.

Anyone know how I can uninstall/delete this app. mac book pro 10.7 lion

Kimsickle wrote:
It won't let me. No x appears to remove it in the ordinary way. It's not running the background so I can't see why it won't delete
Nor can I. This is the first report of any AppStore app not having a delete "x".
I suppose I should write up a bug report, but that usually needs to come from the ClamXav Forum. If the developer needs more info, I guess he can come here.
mende1 solution should work to delete all of the large files. The preference file is at:
~/Library/Preferences/uk.co.markallan.clamxav.plist
If you set up any schedules they would be at:
~/Library/LaunchAgents/uk.co.markallan.clamxav.freshclam.plist
~/Library/LaunchAgents/uk.co.markallan.clamxav.clamscan.plist
where "~" is your home folder at /Users/<yourusuername>/.
To access your Library folder, hold the option key down and select it from the Finder's "Go" menu.

File is not comming to target system

Similar Messages

Maybe you are looking for