'file is not valid mpeg' runtime error while building

I have imported a series of files exported from Premiere Pro 2.0 into Encore, which lists them as 'do not transcode' on the project window. Running a project check doesn't find any problems, yet when I try to build the DVD, either directly to disk or to a folder on the HD, I get the above message. This happens at about 1/3rd of the process, but doesn't tell me which one of the files isn't a valid mpeg.
This is most annoying, as there are nearly 20 smallish clips in the project, if I know which file is supposed to be 'not valid' I could re-export it.
Any ideas?
Many thanks

But then would i have to re edit the dvd menu?
Casey,
You are loosing me here. If you are only replacing the Video Asset, the Menu should not figure into the equation.
The exact steps that you are using to replace that Asset in En could well hold the key. These steps can be very important.
Since you have done the Encore Project before, with other Assets, have you flushed your Media Cache in En? That would be my first step.
Now, are you trying to Import maybe a 16:9 Asset into a 4:3 En Project? That could spell trouble.
Good luck,
Hunt

Similar Messages

Adobe Encore CS4 File is not valid MPEG?

Hi!
Today, I opened up my Encore project to make a small change. I imported new assets and changed the menu to something different and then linked my buttons to a new timeline that then linked to another timeline.
I planned to create a DVD, but while it was transcoding and error popped up that said "Adobe Encore File is not valid MPEG."
All of my assets are in MPEG2-DVD format. The menu (both the original menu and the new one) was a video created in After Effects CS4 and the other assets were created in Premiere Pro CS4.
Both the menu and video are 720x480.
Thanks,
Brittany

Um, I'm not exactly sure how to find this, but I just right clicked on the video to click properties and this is what I found:
Menu:
Data Rate: 6455kbps
Menu Audio Bit Rate: 1536kbps
Second Part of Menu: (I have it set up so that it when you click "Play" or "Behind the Scenes" that it looks like the camera zooms into the title on the menu. This is in a seperate timeline.)
Data Rate: 6000kbps
Audio Bit Rate: 1536kbps
Main Video:
Data Rate: 7000kbps
Audio Bit Rate: 1536kbps
Also, I don't know if this is worth mentioning, but .xmp and .m2v.xmpses files also rendered along with my MPEG2-DVD video. I guess this is standard but I just thought I should mention it.

Runtime error while trying to convert script to pdf and sending in mail

Hi all,
I m trying to convert the standard script into pdf using convert_otf fm and trying to send it as an attachment using 'SO_NEW_DOCUMENT_ATT_SEND_API1'.
I m using fm 'SSF_FUNCTION_MODULE_NAME' to get the function module name.
But i m getting a runtime error while executing the program..
Can anyone help me in this issue please.
Thanks in advance,
Ashok

Hi Ramesh,
I m getting an runtime error function module not found. I ll paste the code here.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = lf_formname
    IMPORTING
      fm_name            = lf_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
error handling ent_retco = sy-subrc.
perform protocol_update_i.
ENDIF.
ls_control_param-getotf = 'X'.
DATA: l_document_output_info TYPE ssfcrespd,
        l_job_output_info TYPE ssfcrescl,
        l_job_output_options TYPE ssfcresop.
check ent_retco eq 0.
CALL FUNCTION 'lf_fm_name'
EXPORTING
    archive_index = toa_dara
    archive_parameters = arc_params
    control_parameters = ls_control_param
    mail_recipient = ls_recipient
    mail_sender = ls_sender
    output_options = ls_composer_param
    user_settings = ' '
    zxekko = l_doc-xekko
    zxpekko = l_doc-xpekko
zxaend = l_doc-xaend
    IMPORTING
      document_output_info = l_document_output_info
      job_output_info = l_job_output_info
      job_output_options = l_job_output_options
      TABLES
        l_xekpo = l_doc-xekpo[]
        l_xekpa = l_doc-xekpa[]
        l_xpekpo = l_doc-xpekpo[]
        l_xeket = l_doc-xeket[]
        l_xtkomv = l_doc-xtkomv[]
        l_xekkn = l_doc-xekkn[]
        l_xekek = l_doc-xekek[]
        l_xaend = l_doc-xaend[]
        l_xkomk = l_xkomk
        EXCEPTIONS
          formatting_error = 1
          internal_error = 2
          send_error = 3
          user_canceled = 4
          OTHERS = 5.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = 'PDF'
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = v_len_in
    TABLES
      otf                   = l_job_output_info-otfdata
      lines                 = tb_pdf
    EXCEPTIONS
      err_max_linewidth     = 0
      err_format            = 1
      err_conv_not_possible = 2
      OTHERS                = 3.

WSDL URL is invalid or the WSDL file is not valid or incorrect

Hi All,
I am using Oracle Soa Suite 11g. I have got Oracle database, Oracle weblogic admin server, Oracle SOA server all installed on my laptop.
I have deployed a sample BPEL process. When I am trying to test the process it is giving an error
"Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://KSNPavan-PC:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect "
Now, when I change the url address to
"http://localhost:8001/soa-infra/services/default/MyHumanWorkFlowSample1Project/vacationrequestprocess_client_ep?WSDL"
(Please note the difference in host name from KSNPavan-PC to localhost.)
and click parse wsdl it is working well. I mean the test page is opening successfully and I am able to test the service.
Testing the service from admin console is fine. Now I want to use this BPEL process service in another BPEL process. So, when I am piciking this service wsdl in JDeveloper it is throwing me the same error and I am unable to go ahead.
Can anyone please tell me whetherI have to set property in the admin server console so that it always take local host in all the wsdl urls and solve my problem.
Thank you,
KSN Pavan.

Hi All,
My problem has got solved with the help of my colleagues. Actually the problem was that the host name KSNPavan-PC is not there in the C:\Windows\System32\Drivers\etc\hosts file. I Added the host name in the file with the IP same as that of local host and everything isworking well now.
Thank you,
KSN Pavan

Either the WSDL URL is invalid or the WSDL file is not valid or incorrect.

Hi ,
i deployed one bpel process in weblogic.
when i am click on test below is error is coming. ( its on oracle soa 11)
below is coming for all the process. previously it is working fine.
Either the WSDL URL is invalid or the WSDL file is not valid or incorrect. - WSDLException: faultCode=OTHER_ERROR: Failed to read WSDL from http://xxxx:8001/soa-infra/services/default/ReadJMS/readtraxjms_client_ep?WSDL: HTTP connection error code is 503
Please help me how it is resolved.
Regards
jan

Hi Jan,
We had the same issue in 11.1.1.3 and we used to restart the server to fix it. Hopefully before going to PROD we upgraded to 11.1.1.5 and next time we saw this issue was only when there was some problem with the OHS (it was down etc.).
Which version you're on?
Regards,
Neeraj Sehgal

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Getting Portal Runtime Error while accessing one link in Portal Page.

Hi,
Can anyone tell why I am getting below error while accessing one of the portal page link:
" Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 01:19_27/02/09_0046_16441150
Refer to the log file for details about this exception. "
Also please let me know how to get rid of this if possible.
Thanks in Advance
Vaibhav Srivastava

Thank you for your prompt reply.
Could you please elaborate the same.
I am getting Portal runtime error while I am acessing an iveiw in E-recruiting. We have setup the role and user in both portal and Backend. But still the error. Could you pls send me the setting you have done.
Portal runtime ERROR
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:27_27/04/09_0042_113148050
Refer to the log file for details about this exception.
regards
Justin

The setting ExternalProxy in the Web.Config file was not valid.

Since installing Exchange 2010 SP1 (Upgrade from RTM) I get this in the event viewer.
The setting ExternalProxy in the Web.Config file was not valid. The previous value was null and has been changed to .
Any ideas what to check?

I'm also getting a number of these errors on Exchange 2010 SP1 RU1, the settings that I get notified include (the values have been changed to a number of diferent values):
ExternalProxy
BootstrapMailDeliveryDelay
MobileUpdateInformationURL
BootstrapCABForWM61HostingURL
FullServerVersion
ADCacheMaxOrgCount
ADCacheExpirationTimeout
MaxDocumentDataSize
MaxDocumentLibrarySearchResults
MaxGALSearchResults
BadItemEmailToText
BadItemIncludeEmailToText
BadItemIncludeStackTrace
MaxClientSentBadItems
MailboxSearchTimeoutNoContentIndexing
MailboxSearchTimeout
MaxMailboxSearchResults
MaxRequestsQueued
MaxWorkerThreadsPerProc
MaxCollectionsToLog
ProxyConnectionPoolConnectionLimit
ProxyHandlerShortTimeout
ProxyHandlerLongTimeout
BackOffErrorWindow
BackOffTimeOut
BackOffThreshold
ProxyVirtualDirectory
BlockLegacyMailboxes
BlockNewMailboxes
SchemaValidate
SchemaDirectory
SyncLogDirectory
SyncLogEnabled
DisableCaching
DeviceClassCacheADCleanupInterval
DeviceClassPerOrgMaxADCount
DeviceClassCachePerOrgRefreshInterval
DeviceClassCacheMaxADUploadCount
DeviceClassCacheMaxStartDelay
MaxWindowSize
MaxRetrievedItems
EventQueuePollingInterval
ADCacheRefreshInterval
MaxSizeOfMailboxLog
NumOfQueuedMailboxLogEntries
MaxNumOfFolders
Can these be resolved in a similar manner. Some additional information would be great (as sjoegarrett I can also ignore them, but would prefer if these could be eliminated).

RD Client and RDWeb 2012 - RDP file is not valid when run from chrome browser on Android

After signing into the RDWeb using Android Chrome, I see the published remoteapp. If I click to
run remoteapp, it tries to open the RDP file with the installed RD Client but I got this error "Import Error - The RDP file is not valid. Notify your network administrator."
I have google about this error. One of the forum suggest to use RD client remote resources tab to access the apps but in our environment our user want to use their
own web browser to access the apps. Is there any way we can solve this issue?.

Hi,
I’m afraid that we have to configure Remote Resource.
Thanks for your understanding.
Jeremy Wu
TechNet Community Support

Runtime Error While in Tcode KES1

Hello Team,
We are using ECC6 EhP6.
I am getting a Runtime error while working with Tcode KES1:
Short text
          Syntax error in program "SAPL0KEA ".
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "SAPLSVIM" had to be terminated because it has
          come across a statement that unfortunately cannot be executed.
          The following syntax error occurred in program "SAPL0KEA " in include "L0KEAT00
" in
          line 225:
          "The Dictionary structure or table "*T2580" is either not active or doe"
          "s not exist."
          The include has been created and last changed by:
          Created by: "GAURILAD "
          Last changed by: "SAP* "
          Error in the ABAP Application Program
          The current ABAP program "SAPLSVIM" had to be terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          The following syntax error was found in the program SAPL0KEA :
          "The Dictionary structure or table "*T2580" is either not active or doe"
          "s not exist."
     Please help me resolve this issue
Thanks
Saheli

Hi Dnyaneshwar,
   Please execute report RKEAGENV and regenerate operating concern and check if the issue is resolved.
   If not run report RKEAGENF with your operating concern, type of COPA = 1 (costing based) and flag the 'Refill' option. Regenerate the operating concern.
If running report RKEAGENV will cause another error concerning   operating concern E_B1,then please follow the steps in KBA note 1514122
Operating concern should be E_B1 even though you may not be using this operating concern.
regards
Waman

Getting runtime error while doing sales order

Hi,
I am getting a runtime error while doing sales order.
Error : SAPSQL_INVALID_FIELDNAME
Kindly suggets....stuck up badly.
cant do any transaction.
Regards
Kishan

Hello,
Check OSS Note#209847 and 310304
Regards,
Gauravjit.
Reward points if the notes are helpful

Runtime error while creating role in pfcg.

hello friends,
Runtime error occurs while i creating the role in pfcg. when i click the option under the menu tab in PFCG the following Runtime error occurs.
Runtime Errors *CALL_FUNCTION_PARM_UNKNOWN*
Except. CX_SY_DYN_CALL_PARAM_NOT_FOUND
Please help me to solve this issue.
thanks&Regards,
Farkath.C
Edited by: farkath ulla on Jul 4, 2011 1:33 PM

Hi,
Check SAP Note 980625 - PFCG: Runtime error during menu transfer
Thanks
Sunny

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime Error while summing a column in ALV output

Dear All,
I have developed an ALV Report and the report is giving output without any flaws.
I have defined proper field catalog and displaying the results using REUSE_ALV_GRID function module.
Now the report is generating Runtime Error while the user selects a column and click the SUM icon.
The fields like Qty, or amounts are also theowing runtime error while summing up their column in the ALV output.
What might be the reason and how to resolve this issu?
Regards
Pavan

Hi ,
I don't know how you have write down the code but follow the below coding example:
FOR TOTAL:
there is a property of fieldcatalog, that is do_sum.
USE COED LIKE:
PERFORM fieldcat USING:
'1' 'MATNR' 'I_MARD' 'MATERIAL NO' 'MARD' 'MATNR ' ' ',
'2' 'NETWR' 'I_MARD' 'PLANT' 'MARD' 'WERKS' ' ',
FORM fieldcat USING value(p_0029)
value(p_0030)
value(p_0031)
value(p_0032)
wa_fieldcat-col_pos = p_0029.
wa_fieldcat-fieldname = p_0030.
wa_fieldcat-tabname = p_0031.
wa_fieldcat-reptext = p_0032.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " FIELDCAT
in final output you will get the total of currency field.
FOR SUB TOTAL:
decleare: i_sort type standard table of slis_sortinfo_alv,
wa_sort type slis_t_sortinfo_alv.
wa_sort-spos = '1'.
wa_sort-fieldname = 'field1'.
wa_sort-subtot = 'X'.
append wa_tab to i_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fieldcat
it_sort = i_sort
Hope this can solve your pbs.
If you need more inputs let me know.
Regards,
Tutun

'file is not valid mpeg' runtime error while building

Similar Messages

Maybe you are looking for