File is stuck at 30% when opening

Hi,
I have created a Captivate 5 project on one PC and have tried to transfer this to another PC to work from their. However when I try to open the CPTX file it gets stuck at 30% and then gives me an error message asking me to chekc if the file has corrupted or the PC has enough resources.
Can anyone help me to try and fix this.
I have tried to transfer it using a memory stick, CD and via the network.

OK. If you are able to open the original CPTX project file on the original PC, your issue may be due to the lock file that Captivate normally creates when opening projects.
Make sure you successfully close down the CPTX file and then browse to it's file location in Windows Explorer. See if there are any files at that location with the same name as the project file but with a slightly different ending to indicate they are a locking file. If so, delete the locking file, then try copying the CPTX file using Windows Explorer to your chip, and then from there to the other PC where you need to work on it. Don't work off the chip. Copy the project file to the hard drive of the computer where you need to work on it.

Similar Messages

Saved PDF files in Illustrator not showing when opened in Reader

I'm having a problem with files saved as PDFs in Illustrator, which, when opened in Reader
reveal only a blank page. Any solutions?

Thanks for your response. It doesn't seem to matter which layer is higher in the stack. I also checked that each layer was set to "print". I think the problem is on the Mathematica side --- the problem I have arises with pdf graphics generated in Mathematica 8, but not in 9. Hmm.

Illustrator cs6 "this file cannot be found" problem when open file from network

I used to install the trial version of Illustrator CC on my desktop and then when the trial run out I decide to go with illustrator CS6 instead, So I decide to buy &
install Illustrator CS6 on our desktop and everything seem to be fine except
the problem is our .ai file is located on the network shared drive of the design team,
When we try to open the file from the network drive with illustrator CS6, it said "This file cannot be found"
- we try to copy the file from network drive to our desktop and file can open without problem
- if we directly double click the file from the network drive to launch the illustrator CS6 with that file. It's also fine, no problem at all.
- but if we open the illustrator CS6 first and try open.. and then browse to that file on network, then "This file cannot be found" happen again.
- Illustrator CS6 have no problem open file in the local harddisk.
- Illustrator CC never have this problem open file in our network drive, try reinstall the Illustrator CC trial again and it can open without problem
- I try using Adobe CC Cleaner tool to remove everything before reinstall the Illustrator CS6, still no luck.
- Try remove the Adobe relate folder in user/user/Appdata and then reinstall, still no luck
- Try right click and open with --> Illustrator CS6 , yes if we double click the file directly it's ok, but as mentioned if we open illustrator first then browse for the file, the problem happen.
Did I miss anything to fix it ?

the same thing happend to me,
in my office the same folder with hebrew name, I can open files
on my laptop the same folder with hebrew name, I cannot open files.
I know its about the folder because when I put the files in a different folder, it open them.
how can I fix it without changing the names of my entire work folders?
there must be a different between my two computers.
thanks for your help

Full file path in Office 2007 when open or save

Am not sure i can raise this question here.
We are using 10gR2 Application server and Windows 7 as a Client. In the client machine we have installed the Microsoft Office 2007.
From the forms we are trying to open and save (after changes) the files of format Doc/Xls. These files will be stored in separate shared folder accessible through Application server and client.
Now the issue is when we open/save the file it shows the Entire path (In Saving Window) which should not happen. In previous release of MS office its not like this.
Please help us "to hide the file path to be displayed to the user". Like changing the registry for Office 2007 or workarounds or new solutions or any other oracle's product.
Note : Showing the file name is the Office 2007s default behavior.

The only way to avoid showing this from a Forms point of view would be to not display the open/save file dialog in the first place. In other words, control the opening and saving using your own custom dialogs. Also, be aware that using remote drives (network mapped) may cause problems. Generally speaking, doing this would not be considered supported.
As for opening documents on the client, there is no need to use the open file dialog if you know the file name and path to that file in advance. You can simply use WebUtil's CLIENT_HOST. So let's say you wanted to open a file named mySales.doc and you knew its location, all you would need to do is this:
Declare
     my_cmd varchar2(255);
Begin
     my_cmd := 'rundll32 shell32,ShellExec_RunDLL '|| :t1;
     CLIENT_HOST(my_cmd);
End;In the above example, +:t1+ is a text field on a canvas. The value would include the path and file name to be opened. Of course this could be a pl/sql variable which you programatically populate or any combination of that. The value value must include the full path (with drive letter) and full file name. If the path or name contains spaces, double quotes may likely be necessary. You will have to test.
For saving an opened file, you are mostly out of luck from Forms unless you took control of Word/Excel as it was being opened in the first place. For example you likely can open the Office products using OLE or VB or other macro and control what the open and file save dialogs look like or if they are even accessible at all. But this has nothing to do with Oracle or specifically Forms.
You need to refer to the MS documentation.

How do I stop files changing my units preferences when opening in illustrator

When I open files in illustrator that have been sent to me they sometimes open with the measurement units changed from "mm" to "cm" or even "in", not a huge problem but when I have 10 files for a job that are all doing the same its an extra bit of messing around I could do without.
They can be any kind of file .ai .eps .fs .pdf etc..., when I go into my preference to change it back it shows that it is set to "mm" already?????. I can change it to "mm" again but I have to go Edit - preferences - Units - change them to read "cm" - OK, then repeat the process Edit - Preferences - Units - change back to read "mm" and that does it.

You are welcome, maxwells3.
When you have the time (and courage), you may have a go with some of the suggestions in the list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

View of PDF file changes or looks strange when opening a file.

Hi all,
I have strange problem, that is haunting me.
A PDF file is created from Microsoft Dynamics AX 2009 system. I guess that Microsoft have their own pdf-writer-engine.
From time to time, we have seen that the PDF files, on some computers looks correct, on others gibberish.
One user has a Win7 machine, 32-bit system. 4gb of memory. Today he opened a PDF file from the AX system. When He opened the file on his desktop., it looked fine. After 5 seconds. The entire view changed to strange signs and letters. I opened the same file on a Win-7, 64 bit machine. Everything looks allrigt. Both of us have Adobe Reader 11.04 installed. one-two houes after the first error, he opened another PDF file. That started to look like gibberish, and after 5 seconds it looked allright.
In general we only see these types of errors something like 1 out of a hundred times. Most common is that the view is gibberish from the beginning, and never changes.
Any idea to solve this, will be much appriciated
/Hector

I think this is done by the browser when it is saving a temporary file and there's already a file with that exact name in the temp folder.

Suddenly getting "FIle not accesible" error coming when opening a file from time capsure drive, please hlep

I just logged on today after a week to my wifi network coming from apple time capsure and when trying to access time capsue data, it is showing "FIle not accessble". A;ll the files are showing "X" mark for each file type, any help regarding this is appreciated.
Thank you,
Narasimharao

Reboot the TC..
Open the airport utility in windows and make sure you have guest access turned on to read and write.
Also make sure you are in the correct workgroup and all network names meet SMB standard.. short, no spaces and pure alphanumeric.

Iphoto Stuck at loading when opened

well, it is stuck at The beginning and it has a never ending "Buffering" Symbol
I don't know what to do
I haven't used it before, nothing is showing up in the side bar, and It won't let me import from anything

Try this:
http://docs.info.apple.com/article.html?artnum=107947

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

Pages stuck in trial mode when opening file...

I purchased Pages through the app store after using it as a trial.
When I open Pages directly and then load a file everything works fine. However, if I open Pages by clicking on a file it opens in trial mode and I cannot save as it tells me it is expired.
I only see one reference to Pages under my applications and it works fine. If I change the program that opens files, there is only one listing for Pages and selecting it does not change the problem.
Does anyone know why when opening a file I get stuck in trial mode? Is there another instance of Pages installed somewhere?
I'm fairly new to Mac, so it's possible I overlooked something. Thanks.

Even experienced users miss this one. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

WHEN OPENING A FILE WITH FIREFOX MULTIPLE FILES KEEP OPENING IN RAPID SUCCESSION WITHOUT SHOWING ANY CONTENT AND THIS DOES NOT STOP AND I CANNOT SAY HOW MANY FILES I HAVE

THERE IS A PROBLEM IN OPENING ANY FILE. WHEN OPENING - A RAPID SUCCESSION OF FILES OPEN, ONE ATOP THE NEXT, WITHOUT SHOWING FILE'S CONTENT. THIS CONTINUES FOR QUITE A WHILE. I MUST TURN OFF COMPUTER. IT IS NOT POSSIBLE TO CHOOSE ANY OTHER FUNCTION WHILE THIS IS HAPPENING, IE : WHEN OPENING A FILE. AS IN , I CANNOT OPEN GOOGLE OR MAIL, ETC. AND THE FILES KEEP OPENING AS UNTITLED. SO I AM NOT ABLE TO OPEN ANY ONE FILE, AND SEE ITS CONTENT, THEY JUST KEEP STACKING LIKE EMTY PAGES ONE ON TOP OF THE NEXT.

THANK YOU
THAT DOES NOT SEEM TO BE THE ANSWER
I HAVE A MAC
BOUGHT IN 2008
AND I DO NOT SEE THAT I HAVE A STUCK KEY
PERHAPS I AM NOT UNDERSTANDING WHAT YOU MEAN

I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I ha

I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.

I recommend you erase the TC.. it is the easiest and fastest solution.
In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
Start again but copy files in small amounts.

Firefox freezes when opening a window with PDF files, etc., yet it works perfectly when using explorer as browser.

I think Firefox mozilla is having issues with Adobe reader. It frequently crashes. I think this may be why my computer freezes when pulling up a PDF file or other text windows, yet, everything works perfect when using Explorer as my browser. It is so frustrating using Mozilla because it gets stuck when opening windows which require pulling up certain types of texts or applications, then I have to wait forever, or, reboot, and once in a while it gets so stuck that I have to take out battery and remove all power sources then start from scratch, and set my computer back to all settings previous to failure. Like I said, this only happens with Mozilla, all other browsers work perfectly well, but I love my Mozilla and it is my preferred browser. Please help. Thanks so much,
susan

Hi Susan,
The Adobe plugin in Internet Explorer is a bit different from the one in Firefox, however they're all made by Adobe and they usually come with Adobe Reader.
When you open a PDF file in Firefox, it "calls" Adobe Reader to help it read the file. In this case, the Adobe Reader takes over, and it is responsible for freezing your browser.
I suggest you try the last 4 solutions presented on the [[Opening PDF files within Firefox]] (start with "Re-install the plugin" through "Re-install Adobe Reader").
Good Luck :D

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

What version of Bridge and Photoshop and what platform? Mac or Windows? I can point you to a downloadable installer.
If the cdrom was damaged, it may be the problem.
You would uninstall and use the CC/CS Cleaner to remove any remnants before reinstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
I'll be gone for most of the day, but someone should be able to help you if you get stuck.
Gene

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

File is stuck at 30% when opening

Similar Messages

Maybe you are looking for