File is visible in content server even after deletion

Hi
After a file has been deleted, it is still showing on the Search Results page. Although when I click on the Info button or the file Id, it shows the following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
How to ensure that the deleted file is also removed from the search results page?
Regards
Pradeep

When I do a collection rebuild, the following error occurs:
Indexing aborted at 8/4/13 10:50am. Aborting index build. Too many errors with finding and copying files to the appropriate place.
Due to failure of indexing, files are visible even after archiving. Please help.

Similar Messages

Very large files checkin to DMS/content server

Dear experts,
We have DMS with content server up and running.
However, there is a problem with very large files (up to 2GB!) - these files cannot be checked in due to extremely long upload times and maybe GUI limitations.
Does anyone have suggestions how we could get very large files into the content server ? I only want to check them in (either via DMS or directly to the content server) and then get the URL back.
best regards,
Johannes

Hi Johannes,
unfortunatly there is a limit for files regarding the Content Server which is about 2GB. Please note that such large files will cause very long upload times. If possible I would recommend you to split the files to smaller parts and try to check it in.
From my point of view it is not recommended to put files directly on the Content Server, because this could lead to inconsistencies on the Content Server.
Best regards,
Christoph

Why is the number of earlier visits so high in the security tab of the certificate information window when visiting a https protected site(in my case 13.400) even after deleting cookies?

When you go to www.gmail.com and I rightclick on the gray coloured "google.com" showed left next to the address bar then it shows you the certification details. Whe you click on "more info" and then go to the security section it show you how many times you visted the site before. In my case it say`s none, but thats not the case with my friend, his nuber of earlier visits says 13.400 even after deleting cookies/history.
Can someone tell me what this means, and if maybe someone other than himself is watching his email because he`s a bit worried now.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

No.
You got 2 more basic troubleshooting steps left before you make an appointment with the Apple genius bar for an evaluation:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

I keep receiving duplicate email, even after deleting them, they keep coming up as new wails.

I keep receiving duplicate email even after deleting them

After you delete them, empty the trash before they re-load.

Up. how do i connect it to itunes, even after deleting everything to do with itunes and then reinstalling?

my ipod wont connect to my itunes and an error message keeps popping up. how do i connect it to itunes, even after deleting everything to do with itunes and then reinstalling?

What does the error message say? Complete wording of the message is required

My email keeps loading the same emails even after deleting them. They keep coming back everytime I start up the mail app. What can I do?

My email keeps loading the same emails even after deleting them. They keep coming back everytime I start up the mail app. What can I do?

After you delete them, empty the trash before they re-load.

How to delete all my personal messages from my iphone..... even after deleting from inbox it is available in the search iphone option that is siri

how to delete all my personal msg from my iphone..... even after deleting it fom inbox it is available in the siri option

As stated in your first post, restore your phone as new.

Cm.jar is working even after deleting the jar from Server

Hi,
To update the environment with the new changes we had manually copied the cm.jar into the respective folders but due to some class errors Deployment was not successful,So as a matter of trial we had deleted cm.jar from the respective folders and then we had ran the initialsetup,
Strange thing what we have observed is that all the custom logic which was initially deployed through cm.jar was still exisiting in the applicationserver and are getting executed smoothly
This is the process what we have followed
Method 1:
1)     Stop server
2)
Copy cm.jar to SPLBASE/etc/conf/root/WEB-INF/lib
Copy cm.jar to SPLBASE/etc/conf/XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
3)     Run InitialSetup
4)     Start Server
Method 2:
1)     Stop server
2)     Set Exploded directories to true
3)     Initial Setup
4)
Copy cm.jar to SPLBASE/splapp/applications/root/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/applications /XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
5)     Run InitialSetup
6)     Start Server
Method 3:
1)     Cm packaging.
Even after removing cm.jar from all places manually my custom code which I deployed initially is working. I could run custom batch and custom algorithm. Very Strange. I am not sure what I missed or where application is referring to.
We want the old code to be removed permanently from server?Can you anyone help?
Thanks
shiva

Hi Mr Shankar,
Even if you have deleted the cm.jar file from respective location.It do exist in splapp.war file.If you will extract that file you will find the cm.jar file in /splapp/web-inf/lib/cm.jar location.So whenever you will run the initialsetup it will restore the cm.jar.This thing is happening in your case also.So delete the file from splapp.war and rebuild the war.This will solve your issue.
Hope it will work for you.
Regards
sunil sahu

Navigation links are visible to all groups even after applying specific target audience group in to links at sharepoint 2010 publishing site

Hi ,
Any one please help me on why the global navigation links are visible to all group users even after applying a specific target audience group to the link. I Checked , User profile service and User profile synchronizing services
and they are running fine. Test environment is running fine even both the services are not running. Please let me know is any relation should be there between target audience and User profile services?
I am wondering that the Target Audience is not working in global navigation suddenly in production server and the same is working in test server.
Thanks & Regards,
NareshRaju YV,
Infosys.

Hi NareshRaju,
Did you add SharePoint Groups to Target Audience ? if yes please refer http://social.technet.microsoft.com/Forums/sharepoint/en-US/7862f182-c6a2-4d2e-9025-b11514575ac3/audience-targeting-for-navigation-link-issue?forum=sharepointgenerallegacy and
you will get solution
Let us now if this helps, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Content Server problem after 5.0.2 upgrade

Hi,
We've just upgraded our staging environment from 5.0.1 to 5.0.2 and have lost all branding. The diagnostic script reports the following error:
==========
Community Branding Image Publishing Target : FAIL Settings
Community Branding Image Publish File Location: file://localhost/C:/ProgramFiles/plumtree/ptimages/imageserver/plumtree/portal/templates
Community Branding Image Publish Browser Location: http://<SERVERNAME>/imageserver/plumtree/portal/templates
Community Image FTP User Name:
Community Image FTP Password:
Possible Resolution
The file could not be found at the browser locationEnsure the community branding settings in content.properties are correct. The file location and browser location must be valid paths.
Error Details
Exception Message: Connect Failed. HTTP response code: 404
======================
I tried resolving both the file location and the http address from within the Content Server box and was able to without problem so I know it's not these it can't see.
I checked the pcs.log and the following error is reported:
======================
com.plumtree.openfoundation.io.XPFileNotFoundException: jscomponent file for jscontrols not found or failed to load.Exceptions encountered: - com.plumtree.openfoundation.io.XPFileNotFoundException: Failed to receive response from http://<PUBLICURL>/imageserver/plumtree/common/private/js/jscontrols/jscomponent.xmlin the alloted time (10000ms).======================
It appears that the Content Server is trying to access this xml file via the public url for the image server which, due to firewall configurations in this environment, it won't be able to do. I'd like to be able to change how it looks for this file to be http://<SERVERNAME>/imageserver rather than http://<PUBLICURL>/imageserver
Where is it getting this from for me to change it?
Thanks in advance for your advice, hope my problem description makes sense :-)
Anita

Hi Diane,
No, we haven't fully resolved this yet. In addition to the issue listed we've come across a number of others that look like problems from install. We've reached the point where it's looking more effective to try and uninstall Content Server and do a clean install from scratch rather than debug every little thing.
As part of the new install we're changing the architecture to create an internal ImageServer on the CS server and then use a scheduled task to push everything out to the external ImageServer on the portal box overnight. This should get around a number of the firewall and dns issues currently making communication between the two quite difficult.
We recently installed another 5.0.2 portal in a different environment and have had none of the same issues with it so we're a little perplexed. When we get this resolved I'll be happy to write a note about what it was. In the meantime if you get anywhere with yours please let us know.
cheers
Anita

Counting files in a KPRO content server

Hi all,
Is it a mean to get directly in KPRO the number of files (and eventually the size) contained in a KPRO content server?
Do you know any KPRO/CCMS tool to perform this?
Thanks in advance
David

Hi David,
there might also be people around here (Java-based EP-KM) who know this (I do not). But you may also want to try an ABAP forum...
Regards, Karsten

DIR creation using a template, but template file is not in content Server

HI Sap Gurus,
We have a scenario where in we are planning to maintain a different template Files /documents in SAP DMS,
The user will use this templates to update his details and save the filled in details back accordingly.
so i have uploaded few files / templates in DC30 for a particular Workstation Application to be used as templates,
but this templates are not stored in the content server for the client wide access, so if i have uploaded the file from my system only i can access or work with the template,
why is it so, why is the template not stored in a content server so that every user can access this,
is there any other better way of maintaining the templates in SAP DMS. please let me know.
Points Awaiting
Thanks and regards
Sathish

Hi
There are two options to store templates
1) Source File :- Where you give the File path in ur PC
2) Source Document :- It takes the template from a DIR stored - the orginal may be stored in the content server
Now you have used option 1)..
Go for 2 ) and store the original in the content server. This will help all users to access the template
Regards
Aby

War file not running in content server

i created a site using jdeveloper and deployed it as .WAR file and created a JSP security Group in cs and checked in my .WAR file with jsp Security group.When i click on cs->jsp Server Web App Admin->and click my .war file,it is showing follwing error message.
Content Server Request Failed
Error csJspServerErrorAddWebAppService Failed to add context /cs/groups/sitestudio/documents/document/~edisp/MyApp. Web application exist but unavailable. Please check JSP server log file.
plz guide...........

I am running a similar configuration at another customer and it's working okay for us. What application server are you using? You say that the portals are configured in a cluster. Is this an application server cluster? If so, then the portlet should get deployed to all nodes in the cluster if the cluster is configured correctly. I would suggest that you try deploying a simple WAR file to the cluster and see if it is deployed correctly. A restart of the cluster may be needed to make sure that all of the cluster nodes synchronize with the DAS.
- Jim

File is visible in content server even after deletion

Similar Messages

Maybe you are looking for