File looks strange in windows

an html page that looks wonderful on Macs, I never noticed this before, but in Windows Explorer, the text justifies in center instead of on left.
Why is this? thanks!
Also, annoying issue that a page that open in own window on Mac, in windows people get this stupid "pop up" warning. what is that for? thanks!

Hard to offer advice without see the page.....

Similar Messages

  • Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?

    I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg.  I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
    When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
    What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
    Thanks for any help you can give!
    AVM

    Looking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow.  You probably can't use the flash that close up and should back off and zoom in further.  Experimenting would give you a sense of what situations will have a shadow of the lens or not.
    Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13.  If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
    You can certainly download the PSE13 trial and see if things look any different, but they may not:  Download a free trial or buy Adobe products | Adobe downloads   There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
    One more thing, the White-Balance tint is set to +10 by the camera:
    This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG.  So there is more than just changing the camera profile that you can do:

  • After opened test wav file on my audition CS6, audio file looks strange.

    Hello,
    Now I'm using Audition CS6 while other my colleges are using CS3.
    Even I checked the audio test file is well opened and played on CS3 with 26s total length, but on my CS6 this test file is reduced to 13s(half) and sound is heared faster twice.
    As for normal wav. file works well, but it's happened my test wav. file. I think there is automatically converted when opening the file. Converting has some problems on my CS6.
    Thanks,
    Alvin

    This sounds like an incorrect setting somewhere in the system for the Sample Rate. Could be to do with some settings for your local computer's audio hardware. Alternatively problems opening files a correct sample rate can sometimes be down to problems with the information stored in the .wav file header telling the software what the sample rate should be. What format, bit depth and sample rate id the Test file stored as?

  • [Solved] Openproj looks strange in the awesome WM

    Hi Community,
    I just installed openproj from the AUR. But when I run it in the awesome WM, I found the background of the application looked nearly blank, which made openproj impossible to edit in.
    It looks strange. So, openproj cannot be run from the awesome WM?
    Any idea will be helpful. Thanks.
    =======
    Solved:
    Just edit the file /usr/bin/openproj and add a line to be as follows:
    #!/bin/sh
    wmname LG3D
    java -Xms128m -Xmx768m -jar /usr/share/openproj/openproj.jar > /dev/null
    Last edited by cwjiof (2010-01-12 14:45:20)

    Thank you very much!
    =====
    Edit:
    I've found a detailed description from this article: Java GUI application in Awesome Window Manager.
    There is a known problem with Java and the non-reparenting Window Managers like for example Awesome.
    Java applications which use the XToolkit/XAWT backend may draw gray windows only. The XToolkit/XAWT backend breaks ICCCM-compliance in JDK 5 and 6 because it assumes a reparenting window manager.
    There are a number of places where this is described:
        * in the FAQ : GUI Java apps appear as a gray screen!
        * in the wiki Problems with Java
        * in the Man page
    To sum up:
        * it doesn't affect version Java 1.4.2 and before.
        * it doesn't affect version Java 1.7 and hopefully after.
        * the best workaround by far, is to set a name to the Window Manager, so it is recognise by Java as a non-reparenting Window Manager. A simple utility allow to set this name. Just add 'wmname LG3D' to your .xinitrc or simply run it.
        * Here are other workarounds left here for reference:
              o launch another X server, like Xephyr
              o set the following environment variable (to use the older Motif back-end instead): AWT_TOOLKIT=MToolkit. But this won't work in the following cases :
                    + OpenJDK/IcedTea doesn't include the Motif toolkit.
                    + doesn't work for x86_64 Java, for whatever reason
    Last edited by cwjiof (2009-10-19 12:07:14)

  • .cab files keep corrupting in Windows XP

    Hi all,
    I'm 3 days into trying to install CS3 onto an Xp system so, if you can help me resolve this, you're a genius in my book.  :-)   I keep getting .cab file corruption errors.  I think I've tried just about every trick I could find here in the forums (e.g., copying the disc's contents first to the hard drive, creating a new user account, using CS3 clean script and MS uninstall script, updating MS Installer, and all that jazz).
    I eventually tried installing it on a different PC (Vista) and it installed fine there.  I confirmed with 7-Zip's "Test Archive" feature on that system that the cab files on the disc were indeed fine and then copied all the setup files onto a flashdrive and brought that over to the Xp system.  Strangely, no luck...it seems the .cab files get corrupted even on the flashdrive once they are added to the Xp system.  About the only I haven't tried is updating to Xp SP3 (which I'm hesitant to do as I don't want to risk messing up my other programs that work fine with SP2, especially when I don't even know it will fix it).  I read where one guy with a home network installed it using the CD-ROM from one system to install it onto the other system that he was having the install trouble with.  He seemed to believe the problem was a combo hardware/software issue.  I'm thinking of trying this but will need to get it setup.  Do both PCs need to be running the same version of Windows?  Any other possible fixes?

    confuzeled wrote:
    Any other possible fixes?
    What Flash drives have you tried? Could well be that someting goes wrong when the files get written to them. Still, since it seems you started out with the original discs on the system, that doesn't seem to be the problem. More likely some security tool is scanning the files and damaging or Windows' own DEP has for some reason been set for cabinet files. So I'd definitely look into that. the version of Windows shouldn't matter. CS3 was developed at the high times of XP, so it primarily was made for that andjust the otehr way around, Vista compatibility is the bare minimum required.
    Mylenium

  • Lion server file sharing issue with windows API read/write ini file (GetPrivateProfileString)

    Hello,
    I try to config lion server as file server for a windows application we use at work. All other computers are windows 7 or XP, lion server is the only mac. I choose lion server because it's size, quality and personal love of apple products.
    10.7.2 lion server's samba file sharing works almost perfectly with all my windows machines, I can copy, delete, modify any text files or office files without any issue, but the most important windows application for my business doesn't work with samba file sharing. After some digging, I found it is because windows program can't read or write INI file stored on lion share. Windows API GetPrivateProfileString always returns empty if the INI file is store on lion share.
    You can download a small application for read/write windows INI file from codeproject.com to test this problem:
    http://www.codeproject.com/KB/files/ini.aspx
    I can open/edit the in file using any text editor without any problem. The only problem is with those windows APIs. ACL is turned on for my lion share and assigned "delete" rights to samba users.
    I install samba3 on the same server; it works perfectly with windows API. My windows program also works. Looks like there is something wrong with lion server's sambax.
    I'd prefer to use built-in samba even I have samba3 working. Built-in samba is very immature right now, but considered how young it is, I will give apple some time to make it mature.
    Does anyone have same issue or knows how to fix it?
    Thanks,
    Michael.

    All the memory is fine. The server rarely if ever goes down when there are only around 10-12 users connected. When there are 20+ users connected and working heavily it goes down often. When I say working heavily, I mean they are transferring huge files to the SAN (100GB+), sometimes 5 at a time per user, and there are a bunch of others who are reading large video files at a minimum of 220MB/sec from the SAN.
    Though this worked on Snow Leopard without any issues, Lion just doesn't seem to be able to handle it. The odd thing is, on Snow Leopard there was only a single 1GB ethernet connection to a NAS system, whereas with Lion we have a much more powerful machine with a 6-port 10GB ethernet card and a 4 lane 8GB fiber card to a true SAN. You would think that the newer scenario with Lion would handle far more users with ease.
    So far, very disappointing with regards to Lion's file serving performance.

  • Problem with jsp file on Mac running windows 7 thru bootcamp

    I'm running Windows 7 64 bit on a Mac.  Install went fine.  Problem is that I cannot launch a jsp file (that then launches Citrix).  Instead I get a message that it wants to save the file, or search the web for the program to open it. 
    I downloaded and installed Java (from Java website), but still have the same problem.  Any ideas?  Thanks!

    It does not work in Windows, "I'm running Windows 7 64 bit" that is why I suggested to check your "Windows" file associations and to look into a Windows forum. The issue has to do with Windows. Are you trying to view a jsp page with a browser? If so, what is the url? Are you trying to serve jsp pages? If so have you correctly configured a server with a srvlet container such as Tomcat?
    jsp pages are opened with a browser.

  • Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?

    Looking to run windows on my MBPro through Bootcamp or Parallels, but would like to use a downloaded Windows 7, is it possible to install without the Windows Disc?
    Need to set up a workstation on my MBPro that will only run on Windows. Im willing to use Bootcamp or Parallels to see what works best. Need to get this set up this week to enable working from home on my MB - rural and hoping to buy Windows 7 online - am I able to get windows working through either bootcamp or Parallels without the actual Windows disc? Bootcamp set up guide calls for a disc.

    Welcome to Apple Support Communities
    First, the answer to your question is yes, it IS possible to install Windows in Parallels without a disc, using an .iso image file.
    Boot Camp since OS X 10.8 also installs Windows without a disc: https://discussions.apple.com/thread/4889551?tstart=0
    Parallels has complete documentation, series of forums, and a knowledgebase. You can also download the current release of Parallels 9 and try it for free for a few weeks before you decide to purchase it.
    The Parallels Desktop for Mac product page: http://www.parallels.com/products/desktop/
    The Desktop for Mac forums: http://forum.parallels.com/forumdisplay.php?58-Parallels-Desktop-for-Mac
    Documentation: http://www.parallels.com/support/desktop-virtualization/desktop/#c12970
    The Knowledgebase for Desktop for Mac: http://kb.parallels.com
    The primary difference between a Boot Camp installation and a Parallels installation is that in the Boot Camp installation, you're installing Windows into a separate partition on your internal mass storage device (hard drive or SSD) and then rebooting your Mac directly into Windows.
    In Parallels, you're always running OS X on the Mac and Parallels is running a Windows virtual machine.
    Not to get too technical here, but it is also possible for Parallels to run an installed Windows Boot Camp partition as a virtual machine. If you're evaluating system performance with a trial copy, that might be the way to go, because you only have to install Windows once on Boot Camp as a dual-boot system, then install Parallels Desktop and run the Boot Camp partition as the virtual machine.
    There is a performance difference between the two, with the Boot Camp Windows installation being faster, but without the convenience of running both Mac and Windows applications simultaneously offered by Parallels. Sometimes that convenience outweighs a performance hit.
    I can't give you more Mavericks and Parallels 9 specifics, because I'm currently running Windows 7 with Parallels 7 on OS X 10.8.5. Parallels 7 will not run on OS X 10.9 Mavericks.
    I've been using Parallels (to run a few old rarely-used WIndows applications with features that would require a steep learning curve and major expense to purchase and learn a similar Mac app) occasionally since Parallels 3 and Windows XP. With each new release of OS X, each new release of Parallels, and each new Windows release, there are ALWAYS 'early adopter' bugs that get worked out over time.
    Message was edited by: kostby

  • How to open WMV files in a new window

    I would like to open and play Windows Media Player files in a
    new window that is sized to the player window - not a full new
    page. I cannot seem to find an exension that would handle this.
    Anyone have a place I can look?

    Yes, and if you multiple windows to open, you can save time
    and effort
    with my divaPOPgold:
    http://divahtml.com/products/divaPOPgold/open_popup_windows.php
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Hyperlink to open a file in a new window

    I have been trying to format the hyperlink to a file so it opens on a new window. iWeb allows us to check the box 'open in new window' only for links to external pages; when we insert a link to a file, I realize the app uploads the file to the website, but I could not find a way to have it open in a new window. Is there a way we can get to and format the hyperlink reference?

    1. Create the link that connects to the file (pdf or whatever) on a separate page of your site on iWeb.
    2. Publish your site, then go on the internet to the page that has this link. Keep this page open on your Safari or some web browser you use.
    3. Go back to your iWeb and create another link on a different page (home page, for example) of your site, and connect this link to the URL of the open page in step 2 with "Link to: An External Page" option. Click to choose "Open link in new window" on the Inspector panel. Name this link that has something to do with the file of interest in step 1.
    4. On your iWeb, go the page created in step 1 and make sure "include page in navigation menu" is not selected or checked in the Inspector panel so that web visitor will not get to this page directly.
    5. Publish your site. Now go to your site on the web to the page in step 3. Click on the link and it will open a new page with the link that has the file attached. Visitor can now open the file in that new window.
    • It seems complicated, but you'll get it.
    • You may need to refresh the pages on Safari to make it work if you have left Safari on throughout your work.
    • For this method, you have to dedicate a page to carry the link that connects to the file.
    Example: I create a page that has list of links to the files for viewing. These files are weekly reports. Each file is named by its date such "March 4, 2011" "March 11, 2011" etc.. This page will be hidden from visitors at first when they visit my site. Then I create on my home page a link called "Weekly Reports" that open to "External Page" via the option I have in Inspector. Even though it says "External Page" I use the URL of the hidden page containing all the actual files. On this "hidden" page, I also has a link called "Weekly Report" but this link is connected directly to this page. I do this only because I want the "hidden" page to look like my home page in terms of displayed links.

  • XML Schemas & XML SCHEMA COLLECTIONS: XSD.exe & the tool in C:\Program Files (x86)\Microsoft SDKs\Windows\v7..0A\Bin\x64?.

    Hi all,
    I just read Pages 346-348 of the book "Microsoft SQL Server 2012 Bible" written by A. Jorgensen, P. LeBlanc, J. Chinchilla, J. Segarra & A. Nelson (published by Wiley) regarding XML Schemas and XML SCHEMA COLLECTIONS: Step 1.  create and
    save orderxml.xml
    <Order OrderID="1">
    <Item>
    <ItemNumber>V001</ItemNumber>
    <Quantity>1</Quantity>
    <Price>299.99</Price>
    </Item>
    </Order>
    Step 2.  using the tool in the following location:
    C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\x64
    Open a command prompt, and navigate the preceding directory. The syntax for creating schema is: Xsd.exe C:\temp\orderxml.xml /outputdirectory:c:\temp  to create the orderxml.xsd file.  
    Step 3. Copy all the contents of the orderxml.xsd file to the clipboard, and create a new query window in SQL Server Management Studio, pasting in the content of the clipboard. To create the XML Schema Collection, you need to add the CREATE XML SCHEMA COLLECTION
    statement to the beginning of the schema as shown below:
    --MSss2012bibleP348.sql for XML Schema Collection OrderInformationSchemaCollection
    -- Copied and executed by SHC (Date & Time): 24 April 2015 8:05 AM
    USE ScottChangDB
    GO
    Create XML SCHEMA COLLECTION OrderInformationCollection AS
    N'<?xml version="1.0" encoding="utf-16"?>
    <xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns:msdata="urn:schema-microsoft-com:xml-msdata">
    <xs:element name="Order">
    <xs:sequence>
    <xs:element name="Item" minOccurs="0" maxOccurs="unbounded".
    <xs:complexType>
    <xs:sequence>
    <xs:element name="ItemNumber" type="xs:string" minOccurs="0" />
    <xs:element name="Quantity" type="xs:string" minOccurs="0" />
    <xs:element name="price" type="xs:string" minOccurs="0" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:sequence>
    <xs:attribute name="OrderID" type="xs:string" />
    </xs:complexType>
    </xs:element>
    <xs:element name="NewDataSet" msdata" msdata:IsDataSet="true"
    msdata:UseCurrentLocale="true">
    <xs:complexType>
    <xs:choice minOccurs="0" maxOccurs="unbounded'>
    <xs:element ref="Order" />
    </xs:choice>
    </xs:complexType>
    </xs:element>
    </xs:schema>' ;
    /* Apply it to the table/columns */
    ALTER TABLE ItemInfo
    ALTER COLUMN ItemData xml (OrderInformationCollection)
    GO
    I prepared (i) the orderxml.xml file for Step 1 and Step 2, and (ii) the MSss2012bibleP348.sql file for Step 3. But I am not sure that I can do the Steps (i) and (ii) in my PC that does not have the regular version of Microsoft SQL Server 2012 and Microsoft
    Visual Studio 2012. Furthermore, I  have difficulties to do Step 2 and Step 3 in my PC that is the part of Windows 7 Lan Computer System in my office: I navigated to my C:\Program Files (x86)\Microsoft SDKs\v7.0A\Bin\, I did not see the x64
    thing in the  Bin folder, but, I saw the xsd.exe in the Bin folder. If I click the xsd.exe and I get the following in the bottom of the PC screen:   
    xsd.exe Date modified:12/122011 12:55 PM    Date created:  12/12/2011  12:55 PM
    Applicaion    Size:81.8 KB
    Also, I see my PC screen flashes (and it looks like a dialog box with black background to flash for me to type the command) quickly. I am lost completely in this step and I don't understand the whole thing in doing Step 1, Step 2, and Step 3
    I briefly summarized/described/presented above.
    I need the following help from the experts of XML Schemas and XML Schema Collections in Microsoft SQL Server 2012 Management Studio:
    Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
    Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
    Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in my ScottChangDB
    database?
    Please kindly help and give me the answers/comments for Help #1, Help #2 and Help #3.
    Thanks in advance,
    Scott Chang  

    Hi Scott,
    Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
    Step1 and Step2 not that related to SQL Server, you can get the XSD from a given XML with an online XSD generator.
    Google search: XSD generator
    Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
    Please see the link in the #1
    Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in
    my ScottChangDB database?
    See the syntax and example in
    create XML schema collection
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • Inconsistent and incorrect file icons in finder window list view

    I have been seeing incorrect file icons in finder windows noteably for PDF files the last couple of weeks on my office MacMini running 10.5.8. Some just look messed up. Some switched and looked like Evernote files, but they open correctly in the default application - Preview.
    Get info would show the same incorrect icon, but correctly show Preview as the default application.
    Just now I tried clicking on CoverFlow view and when I went back to List view, the icons looked correct again.
    What type of system maintenance if any is needed to correct this issue? Note, these files continue to display correctly on my home iMac where these files are synced.
    AndrewML

    Thanks for the reply Baltwo.
    I followed your directions. After the restart the PDF icons were all displayed correctly.
    However, some .doc file icons were blank. Selected one, got info, set it to open with MSWord and then clicked "apply to all." Most, but not all now display the Word logo. Some remain blank, although get info reveals they are set to open with Word. Will another restart fix this or is there another suggestion?
    I will be away from this computer till Monday.
    AndrewML

  • File Look Up in Business One

    I am trying to perform a file look up within Business One and I haven't seen any sample code.  In VB I have used the CommonDialog object and it works great, but unfortunately I can't create an object on the Form in Business One.  I know this functionality is used inside of Business One (for instance when you add an image to the Inventory), so if someone could please let me know how, it would be greatly appreciated.
    Thanks in advance for your help!

    Hi Quincy,
    there is no file explorer in Business One yet.
    SAP itself uses the common dialogue object - outside SAP Business One. There have been a number of posts in this forum concerning the useage of Windows- forms in substitution for missing SAP functionalities.
    The next edition of SAP TechDemo AddOn will contain a sample for form creation.
    For now, use a windows form in order to keep addon running and bubble it up front when you need to use Common Dialogue. Search forum for a deeper insight.
    HTH
    Lutz Morrien

  • Hi I am using Iframe with src="abc.mht" file. i want to view the mht file content in same window.please help.. Thanks in Advance

    Hi I am using Iframe with src="abc.mht" file. i want to view the mht file content in same window.please help..
    Thanks in Advance

    This is not a Java problem, this is a WEBBOT problem.
    I suggest that you research the topic in your FrontPage help files.
    Yes, we do know how to solve this problem using ordinary HTML and JSP. The sample code that you've posted implies that you are looking for an extremely different solution. To put it another way, it looks like you're logging onto the Federal Aviation Administration's forums and asking them how to go from Chicago to New York by train.
    But in any case, if you can't find the information in FrontPage, I'm 100% certain that if you went to www.microsoft.com and searched for FrontPage and downloads, and skipped the results that actually want you to download FrontPage, you'll get some sample code.

  • Itunes is displaying in Japanese , all th fonts look strange. Just upgraded

    Athlon Windows XP
    Just upgraded to 7.02 and all text looks strange and music looks to be for the Japan market and price of download in in Yen. All my setting in iTunes are for English.
    What can I do?

    ME TOO!
    At first I thought it was cute, "oh look now I can listen to cool J-pop bands like Bump of Chicken and BoA", but it won't go away. Where is my itms that I know and love.
    And who wants to pay up to 200 yen for a song? That's like two dollars.
    Plus I can't read Japanese.
    Is everyone's iTunes like this right now?

Maybe you are looking for