File-Mail Scenario ( Urgent)
Hi,
I am Doing File 2 mail Scenario.
I Got 5 files in FTP ( Sap1.txt,Sap2.txt,Sap3.txt,Sap4.txt,Sap5.txt)
I have to attach all the file in the single mail with same file name and format.
How can i approch this scenario.
Mutil attachments to a single mail.
Points will be awarded.
Regards,
Jayasimha Jangam
Hi,
Refer
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
Here only one attachment is sent but you can send it one by one (in a loop) from adapter module just check sample adapter modules code from SAP in this blog and you will find how to do it
also refer
XI: Triggering e-mails with multiple attachments
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Thanks
Swarup
Similar Messages
-
File Mail Scenario Problem ( V.V.Urgent)
Hi ,
I am Using PI7.0.
I have a file in FTP ( xyz.rtf) and i want to attach the file and send to the mail.
I configured the scenario.
But I can pick the file and make an attachment and sending to the mail.
My problem is my file xyz.rtf is converting into .xml file and attaching.
I need the same xyz.rtf file to attached to the mail.
And i am using PI 7.0 and i am not finding any options in the file adapter.
Help me and do the needful.
points will be awarded.
Regards,
Jayasimha JangamHi Jayasimha ,
When n sender side you will read the file it will be converted to xml format. If you wish to send it to Mail adapter as an attachment with same .rtf format, then refer below scenario. Here Image file is send as the way you wish to send your rtf file.
Sending an Image File Through Exchange Infrastructure in a File-to-Mail Scenario
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
Thanks
Swarup -
File - XI - Mail Scenario. ( Urgent Issue )
Hi ,
Good Morning...
I am doing File to mail Scenario.
I am Using File & Mail Adapter.
I got 5 files in FTP server named as
SAP1.txt
SAP2.txt
SAP3.txt
SAP4.txt
SAP5.txt
Now File adapter should pick this 5 files and make a attachments to a single mail.
I am able to pick one file and attach and send it to the mail.
But now i have to pick all te files and attach to the single mail with same file names like in source.
How should i proceed for the scenario.
Points will be awarded.
Regards,
Jayasimha JangamHi Jangam,
ur having many files should be maped under one file and then send to a mail adapter
it better to go with BPM is there any any common value in all the files
pls do chk out this blog
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
pls do chk this links they r mainly blogs
if found worth pls do the req
Thanx
Sampath -
File - BPM (RFC) - Mail Scenario
My scenario is File to Mail scenario thru BPM. in BPM I need to make RFC Call. I set ASMA in File sender adapter and File Nmae is not accessible in BPM Mapping. we are PI7.0 SP12. Im sure this is possible but for some reason not working. Any clue ?
Hi,
>>So Q1: Im not getting Filename into BPM though I checked ASMA in the Sender File Adapter
You cannot take the filename (using Dynamic Configuration) in Message Mapping inside BPM transformation step. So I will propose to take it before entering into BPM.
>>Q2: I need to send attachment name as Dynamic which I should get from the Input Message. we are on PI7.0 SP12.
Check the blogs in sdn, you will get more idea on this. If I get any I will reply back
Regards
Suraj -
How to configure receiver communication channel in File to mail scenario?
Hi all,
I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is a mail server. should i create any third party business system for this one?
can anyone suggest me to define a receiver comm channel in a right manner?
helpful answers will be rewarded.Hi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri -
Error in File to Mail Scenario
Hi All,
I am getting the following errror at adapter level in File to Mail Scenario in XI production
Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server not responding OK to RCPT TO; 554 Relay access denied
In XI development the scenario is working fine. I also checked with basis people for the configurations of the two servers and it is same.
Can any one suggest the possible ways to solve the above error.
Regards
PrakashHi All,
I tried with one more SMTP server in both development and production , In development mail is going. But in production i am facing the following error in receiver adapter.
Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused
Exception caught by adapter framework: java.net.ConnectException: Connection refused
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.ConnectException: Connection refused.
Kindly provide some solution to solve the above errors.
Regards
Prakash -
Hi All,
I did file to mail scenario. The source structure contain the following elements like <to>....</to>, <Subject>........</subject> etc (the source structure created by me). In Integration Directory I set the Mail adapter Message protocol as "XIPAYLOAD" and Mail attribute "Use Mail Package" selected. So here my scenario should send a mail to which has i given "To Id" in my source structure. But when i go to SXMB_MONI, I found my message as red flag and it is showing information like "thrown during application mapping". Here what is the problem and how can i rectify the problem, please any one help me,
Thanks & Regards,
Satish,Hi,
you should add your email address to your user,add specific users list add you r user in alrtcatdef.
generally you should maitain the email data type format like
subject,from,to,content-type..
se below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards
Chilla.. -
File To Mail Scenario Clarification
Hi!
Can someone help me with this....
1)In a File To Mail Scenario, while selecting the mail server, do we need to select only the mail server or we can select any server...I mean, when I was doing this scenario, I selected my Windows 2003 server....as the mail server and the url as smtp://ipaddress....Also, I tested it, by putting the Source payload in the FTP server......Then, used SXMB_MONI to check the file....I saw the success flag... My question here is, how to check the mail......Can, you give me the step by step instructions for testing the File to Mail scenario....
2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Thanks....>>2)I loaded Eclipse on my system, How to open that (execute that)...I mean...I want to learn Java Mappings..Where should I put the code.....etc.... Step by step instructions with screen shots please....
Open the "eclipse.exe" and go on help. It will say how to create your first java project. Once you are comfortable with tool then go for Java Mapping. (Efficient way of learning
thanks
Farooq -
In file to mail scenario how can we send a document/image as an attachment along with the data?
Go thru this link. It contains demos on how to work with Mail adapter
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
Have a look at these weblogs ....
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
Regards,
Shabari -
Xml file to mail scenario with zip file as an attachment
Hi experts,
I have a file to mail scenario. File is in xml format.
At receiver side, first I want to zip this file and send the zip file as an attachment using mail adapter.
How can i achieve this?
Regards
DiviaHi Shabarish,
In the module tab i have specified the below beans
localejbs/AF_Modules/MessageTransformBean contentType
AF_Modules/PayloadZipBean zip
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
In the module configuration i mentioned as
Transform.ContentDescription file
Transform.ContentDisposition attachment:filename="file.xml"
zip.filenameKey contentType
zip.mode zipOne
Now i am getting the mail with zip file as an attachment.But the name of the attachment i got is MainDocument.zip
Even the file name inside the zip is MainDocument.xml.
How can i specify my own file name for both zip file and the file inside the archieve folder.Please help me.
Regards
Divia -
File to mail scenario with zip file as an attachment
Hi experts,
I have a file to mail scenario.The mail contains a zip file as an attachment.
The file in the input folder is a zip file. I want to send this zip file via email using mail adapter.How can i achieve this?Please help me to solve it out.
Regards
DiviaHi Narath,
Do check the below link it will be helpfull
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Thanks
Sampath -
File To Mail Scenario With An Attachment
Hi All,
I Want to Implement a FileXI--Mail Scenario With An Attachment
I Want to Send a Text File From the File System As An Attachment to the Mail.
Can We Do this With out Doing JAVA Or XSLT Mappings in this ???
Please Give me the Steps That I Have to Follow
Regards
BabuBabu,
I am not sure how complex is your file sturcture and the mapping. But we can also achieve without java or xslt mapping also. Please check these weblogs:
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Also you have to use module swap for sending the attachment as txt file. Please check this weblog for this:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0964d7c-e66e-2910-24bb-ac535e4a5992
Regards,
---Satish -
File to mail scenario with dynamic email addess
Hi All,
I am doing a file to mail scenario with attachment(mail package is used), where i need to pick a file from folder and based on the file name(Country code is provided in file name. for eg. Collections_UK02_20091210.txt. here UK02 is the country code), i need to send an email to dynamically. I am using value mapping for country code with email address. please provide me suggestions like how can i pick the file based on the country name and send to the corresponding email address.
Regards,
Mahakrishnan T.Hi Mahakirshanan,
>>how can i pick the file based on the country name and send to the corresponding email address.
You cannot do this.. better will be to make a generic interface which will pick the file and based on its filename it will make the to field
Follow these steps:
1 Read the file using communication channel (check the adapter specific identifiers)
2. Using dynamic mapping read the filename and based on the name of file decide the To address and update it to the To field of mail package. You can use value mapping to decide what the targetvalue can be.
Regards
Suraj -
File to Mail scenario? File not received only namespace
Hi,
I tried to do file to mail scenario. I read blogs and forum questions before posting this.
My problem is that I am sending.dat file in file to mail scenario.
I used XIPAYLOAD and without Mail adapter
When i received mail it contains attachement Untitled.xml and it does not contain my file data it contains only this.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30" />
I do not know how to create file with payload containing To, from subject, content things. I tried Michal blog and disabled unneccessary fields etc. and when i send email as file but now In RWB it gives error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: no sender address specified
regards
hussaanHi again,
Simple message types and i use ximail30_xsd.txt from sap note as external defination
Message mapping is also simple according to SDN TV.
Adapter: Mail
Transport Protocol: SMTP
Message Protocol:XIPayload
Adapter Engine: Integration Server
smtps://smtp.googlemail.com:465
Authetication Method: Plain
User: complete email address
Mail Attributes:
From: email address
To: email address
Subject: test
Content encoding: base 64
Keep attachement: Option Checked
No other change i did, With this configuration i receive email with untitled.xml attachement which contains only namespace info (no data).
In my other try i changed message mapping and uses to create payload which michal refers by using constants(text to describe TO, from, subject) and text functions(concat) in message mapping fields.
Integration driectory setting for that
Adapter: Mail
Transport Protocol: SMTP
Message Protocol:XIPayload
Adapter Engine: Integration Server
smtps://smtp.googlemail.com:465
Authetication Method: Plain
User: complete email address
Mail Attributes: option checked
Content encoding: base 64
Keep attachement: Option Checked
With this option it gives error in RWB that no sender found
Regards
hussaan -
File to Mail Scenario - Need help
Hi all,
I am trying a simple file to mail scenario in which i am using following data types .
Source datatype -
Scr_File_DT
-- Root
Material_no
Plant
Target datatype -
Tgt_Mail_DT
--Content
In the message mapping i am concatenating material_no and plant and mapping it to content.
The receiver mail adapter parameters are as follows -
Transport protocol - SMTP
Message Protocol - XIPAYLOAD
URL: smtp://gmail.com
Configure User Authentication: X (Check box is selected)
Authentication Method: Plain (from drop-down box)
User: [email protected]
Password: ****
from: mail address
to: mail address
subject : test mail.
Just wanted to confirm whether these settings are correct or not? Because i am not getting the mail in my mailbox.
Can anyone please help me on this.
Also are there any other settings required for using mail adapter ?
Thanks.Hi,
you should add your email address to your user,add specific users list add you r user in alrtcatdef.
generally you should maitain the email data type format like
subject,from,to,content-type..
se below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards
Chilla..
Maybe you are looking for
-
Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US
We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change
-
when I compile my program, the only error that comes up is: Not a statement pointing to the last statement in the for loop for(int i = 0 ; i++ ; i < labels.length) labels is an array of JLabels. any ideas?
-
XI content certification - ABAP proxies possible?
Hi, can we use ABAP proxies in XI content certification ? I mean develop an ABAP proxy in IR that will be generated in ERP and just supply the code for it ? BTW I've tried asking on : Process Integration (PI) & SOA Middleware but with little success
-
Hi ! I have done a misc receipt by mistake in a process organization. Now i want to revert it back considering inventory, accounting and material costing also. During misc receipt no value was given. Please help me out . Thanx
-
ISE alarm message - HIgh EPM Db usage Replication Stopped
Dear experts, I have the following alarm messages on my ISE monitoring Dashboard Has everyone experience the same problem ? Thanks in advance.. Regards, Rian