File maintenance using keywords

Is it possible to use keywords in summary information to track parameters? Or is there a better way to electronically document what reports use what parameters?
I have more than 100 reports and 15-17 of them use the same activity type parameter. Each time an activity type is added I have to try to recall what reports in order to make the update. Hey, I'm old! Isn't tracking data what computers are good at? Can someone help? Thanks.

Well...my question has been answered twice, neither of which answer I'm equipped to employ. I do appreciate your attempts to assist me!
I/we do not have a repository and yes I am using XI. IT support told me some time back that a repository was not an option in our environment. Thanks Brian.
And I'd really hate to have to export all of the 'suspects' to pdfs to determine which must be updated. So back to my original question. Could keywords work? I don't know how one uses keywords. Care to try again?
Thanks, MMc

Similar Messages

How to quickly reassign previously used keywords

I'm using Adobe Bridge CS6.
My problem is that I have something like 3000 images, in several folders, to apply keywords to, and the keywords happen to be the names of the people appearing in those photos, and I cannot find an easy way to reapply existing keyword assignments. Let me explain:
Some photos will be a single person, others 2 or 3 in a shot, others maybe 6-8 people. And they appear in constantly changing configurations. For example, "John" may appear alone in photos 1-20, with "Peter" in photos 21-22, with "Sandy" and "Peter" in photos 23-30, "Peter" and "Sandy" alone without "John" in photos 31-70, and "John" by himself alone in photos 71-150, etc., with 500-1000 photos per folder. It gets really tedious when you have a group of 6-8 people that is seen occasionally or partially, interspersed with headshots of single individuals. While I have all of their names set up in a master keyword list, the master list itself has maybe 250 keywords in it, and it is painfully slow and tedious to either scroll up and down to the correct names, or to use the search box at the bottom of the keywords panel, each time the mix of persons in a photo changes. (The search is probably faster, but still slow.)
What I would love to have is a panel that showed ONLY the keywords (names) that I've used for the current folder's photos, which would let me apply them to new photos with either a single click (hallelujah!) or maybe drag-and-drop. This is because the currently used keyword list, if it existed, would be so much shorter than the master list, so that all the necessary keywords would always be in view and easily accessible.
What is maddenly irksome is that the currently assigned keywords appear almost within reach in the filter panel ... but alas, it is not possible to use that panel to assign those keywords to new photos.
I don't know if what I'm hoping to do is even possible in the current version. But maybe it is, or maybe someone here has some advice to make the process less frustrating.

What is maddenly irksome is that the currently assigned keywords appear almost within reach in the filter panel ... but alas, it is not possible to use that panel to assign those keywords to new photos.
You can export your current keyword list as back up and create or import a temporarily dedicated shorter keyword list.
But if you look at the metadata panel IPTC Core there is also the option to show the keywords applied to the image (if they don't show use the setting in Bridge Preferences Metadata Tab to select it to show)
Drag and drop is not possible but copy past is an option. Using collections you can select the files you want to apply the same keywords to, and when your search result is complete select the file that has all the correct keywords, copy the complete line of keywords, select all and paste the info in the same line to apply al keywords in one go to all selected files.
Is that about what you are looking for or am I completely misunderstanding your wish?

How to use keywords in a correct way for Acrobat Pro AND Spotlight

When I enter keywords in a PDF using CMD-D in Acrobat Professional I also want to find those keywords via OS X Spotlight. At the same time I to be able to use keywords when I enter keywords in PDFs using Preview.app.
What's the path to do this, and how do these three applications work together to provide a consistent search. I also need to know the details like do I enter keywords in Acrobat with komma or without, with a space before the komma or not etc.
The goal is to be able to have a constistant, compatible workflow for keywords/tags in PDFs using Acrobat, prevoew.app, and other applications; in order to manage large amounts of PDF files.

Hello Joao,
Thank you for your answers. I hope I can ask some more of your time because it is not totally clear yet.
I tried your suggestion to change the stroke width. This has no effect, other than the stroke width, the curves stay filled. It would be nice to show this in a picture... And I just noticed that I had the arguments wrong in my example (been playing around with it too much), the null and green should be the other way round. But also this did not make any difference. Specifying the fill color with the same color as the background color of the map is a workaround though.
Adding the theme_name to the feature attributes is an option, but would that be possible with predefined themes? At the moment we have all the theme definitions in the database.
The most important question however is how do I draw a single feature, based on some condition. The only method I can find in the MapViewer api is drawLiveFeatures with no feature args which "Draws all the live features that are returned to this client from MapViewer". I must be overlooking something.
Thanks again very much for your help,
Ida

Can you edit file properties using Labview?

Except for the file attributes like 'read-only' and 'hidden', Windows 2000 & XP also have file properties like 'keywords', 'comments' and 'description'.
Is there any way that I can edit these properties in Labview?

RichElswick wrote:
nope, we never got that far and I am no longer on that project.
And it would be a bitch to implement. Basically those properties are implement using propertysheet handlers. That are shell extensions that can be installed in Windows and in the registry added to one or more file types. On loading the property dialog the shell (basically only an Explorer thing) sees that for that specific file type there are property sheet handlers registered and then loads them as an extra property sheet into the dialog.
There is no common API to retrieve and lets forget about changing the information those property sheet handlers deal with programmatically. And every property sheet handler retrieves the actual properties according to his own private information, such as image properties in JPG files but possible also extra information in the meta data of a file on advanced files systems such as NTFS (the security property sheet for instance).
So you would have to create a Windows dialog, load the according property sheet handlers into it and then have the user deal with that interactively. I doubt that this is what you want.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

File maintenance

I use the kludge of making a bogus entry in the beats per second field in order to find deleted files. First off letting us sort on the information field that indicates a missing file would simplify file maintenance, and eliminate that step. That way we don't have to do time consuming modification of first editing the beats field with an addition of a number so we can find the missing files, and then re-editing it to remove the entry.
Second, if you could automatically sense the new file location, like other tools (Real and Media Player) do you would provide a comparable tool.

Please check this out for the former:
Otto42, "Can you refresh your library list?" #4, 04:01am Sep 18, 2005 CDT

PDF files search by keyword

I have uploaded several PDF files with saved keywords as metadata, correctly inserted by Acrobat Professional CS3. Why I cannot find or filter my files by keyword?

cherylzyx
When the iPhoto designers created that interface they didn't consider folks with lots of keywords.
Tell them about it:
iPhoto menu -> Provide iPhoto Feedback
Workaround:
Use Smart Albums:
File -> New Smart Album: Keyword -> is -> And pick from the list.
Remember, you don't need to keep the Smart Album, you can delete it when it has done the job.
That's the only free workaround I can think of.
Personally, I use Keyword Manager myself. As well as searching, actually applying the keywords is much faster and easier too.
Regards
TD

Can I use keywords in slideshow?

I am trying to figure out a good way to organize my photos. Some are slides and things I have scanned in, so I use "description" to put a code that lets me know where to find the photo if I need to look it up. I use "title" for what the photo is about (ex-6th birthday party), and use the "date" & "places" to keep those items. I use the "keyword" to keep who is in the photo, and would like to be able to display that on the photos in a slideshow...any way?
If you have any better organizational ideas, I'm open to hearing about them, but I have over 23,000 to fix!
Thanks so much!

I use the "keyword" to keep who is in the photo, and would like to be able to display that on the photos in a slideshow...any way?
No there isn’t I’m afraid. You can show titles, descriptions, titles and description, dates and places but not keywords. You might be best to use the Description box for the names.
so I use "description" to put a code that lets me know where to find the photo if I need to look it up.
Code? Have a look at the possibilities for creating a Smart Album. You can search on all of those and compounds of those too.
My organisation is based heavily around keywords:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums exensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 20k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
Keywording takes time to set up, there's no doubt about it. I use Keyword Manager as it's much more powerful than the inbuilt system, and adds the possibility of nested keywords. So, for instance, if I add John to a photo it also adds 'Family'. Now I can add many keywords to a pic quickly.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.
Regards
TD

Elements organizer 10 - which file retains the keyword structure?

I have organized my photos in elements organizer 10, using keyword tags and sub categories on my desktop. It works great, if I want to see all pictures associated with a particular keyword tag, I select it and all photos assoicated with that tag appear.
the problem is this, I want the same scenario to work on my laptop. I realize I can rebuild the structure on my laptop, but why take the considerable time to rebuild, if there is a file that contains the structure info and move it to my laptop.
Am I asking too much? I hope not.
Thank you, Joseph

No Joseph. That can be done easily. Click on the + icon next to the Keyword Tags panel. A flyout will open. Choose "Save Keyword tags to file" This will create an xml. You can port this xml to your laptop and save it say in Documents.
Now, in Organize on your laptop, open the same flyout by clicking on the + icon and choose, "From File" option to import the same keyword tags hierarchy into the organizer catalog.
Thanks
Andaleeb

Leopard File Maintenance

Does Leopard carry out some form of file maintenance that might be similar to PC commands such as defrag?
If so, are such routines automated requiring no user input, or are user commands required?
Assuming no Mac Leopard particular knowledge, what if anything should I be doing on a regular basis to ensure my files remain healthy and my MBP does not become sluggish and fat due to bloated and fragmented files?
As always, thanks for your advice!

OS X automatically defrags files under 20 MBs in size. There's virtually no need to do any disk defragmentation.
Files only become "bloated" if you keep adding to them and making them larger. They don't "bloat" on their own.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
Others may remark that since Tiger the Unix maintenance scripts run automatically regardless of whether the computer has been asleep or shut down. Although this is true under some circumstances it is not altogether correct. The following is an excerpt from the XLab's FAQ on the topic:
"How the timer used by launchd handles sleep time has led many to believe that they no longer need to run the maintenance scripts, and that the scripts are run automatically if the Mac was asleep or shutdown at the scheduled time, ala third-party utilities such as Anacron. However, this is untrue.
While it may appear that launchd executes the maintenance scripts "on the fly" if the computer is asleep or shutdown at the appointed time, this is a side effect of how the timer treats time the computer has spent in sleep mode. The timer used by launchd does not count sleep time. If your Mac is asleep at the scheduled time at which a given script is supposed to run, the script may run later that day, at a time shifted by the amount of time the Mac was asleep. However, if you restart your Mac before the time-shifted execution time, pending events are lost and the script will not run off-schedule: the next chance for the script to run will be at its regularly scheduled time.
If you regularly restart your Mac and the computer regularly sleeps or is shutdown at the scheduled times, it's possible that the scripts will never run, hence one should still run them manually, say on a weekly basis.
The sleep time shift is also cumulative. For example, if you don't restart your Mac for weeks or months at a time, but let it sleep when not in use, this can result in:
The daily script running once every few days or never.
The weekly script once every few weeks or never.
The monthly script once every few months or never.
The time shift in each case is the total amount of time the Mac has spent in sleep since its last restart. If you have a process that writes heavily to the logs, you can wind up devoting good hard disk space to the log files."

How do you use keywords and info?

I'm new to iphoto and wondered what keywords and info are intended for.
How do other people use them?
Thanks

I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums exensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 25k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
Keywording takes time to set up, there's no doubt about it. I use Keyword Manager as it's much more powerful than the inbuilt system, and adds the possibility of nested keywords. So, for instance, if I add John to a photo it also adds 'Family'. Now I can add many keywords to a pic quickly.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.
Regards
TD

Files in use by Apache clients

I have a Mac Mini working as a web server using the built in Apache Server. I use the Console.app to read the access.log file and have a view of the traffic, but sometimes I would like to know exactly which are the files that the clients are at the moment. Is there a way? A program or something? Thanks.

There it is (complete). It is completely standard, aside of the server-status activation and some new icons addeed:
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 5
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 1
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
#LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
LoadModule rendezvousapplemodule libexec/httpd/modrendezvousapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
#AddModule mod_php4.c
AddModule modhfsapple.c
AddModule modrendezvousapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User www
Group www
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName blaze
ServerName MacMini1250
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Library/WebServer/Documents"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
Deny from 164.77.242.124
Deny from 147.156.17.133
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /Users/*/Sites>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
IndexOptions NameWidth=40
# IndexOptions IconsAreLinks
IndexOptions FoldersFirst
IndexOptions SuppressDescription
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/textx.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
#AddIconByType (SND,/icons/sound2.gif) audio/*
#AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/textx.gif .rtf
AddIcon /icons/fp5.gif .fp5
AddIcon /icons/sit.gif .sit
AddIcon /icons/winmp.gif .wmv .mpg .mpeg .mpe .m1v .mp2 .mpv2 .mpa .ivf .fxa .fxm
AddIcon /icons/mp3.gif .mp3
AddIcon /icons/bomb.gif core
AddIcon /icons/real.gif .swf .ra
AddIcon /icons/mplay.gif .avi .rm
AddIcon /icons/movie.gif .mov .mp4
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_php4.c>
# If php is turned on, we repsect .php and .phps files.
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
# Since most users will want index.php to work we
# also automatically enable index.php
<IfModule mod_dir.c>
DirectoryIndex index.html index.php
</IfModule>
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule modrendezvousapple.c>
# Only the pages of users who have edited their
# default home pages will be advertised on Rendezvous.
RegisterUserSite customized-users
#RegisterUserSite all-users
# Rendezvous advertising for the primary site is off by default.
#RegisterDefaultSite
</IfModule>
Include /private/etc/httpd/users/*.conf

LR 3.2 crashes randomly when using keyword sorting

Anyone else have this problem? When I use the right arrow select to sort using keywords, LR crashes and shuts down. Any suggestions on what to do to prevent this?

When you use the "right-arrow" keyword filtering, Lightroom actually takes you to "All Photographs" and enables the Library filter with the keyword you have clicked selected in the filter. In other words, it's the Library filter that crashes your Lightroom, not the fact that you click the "right arrow".
I've seen many threads reporting Library Filter crashes:
http://forums.adobe.com/message/2986231?tstart=0#2986231
http://forums.adobe.com/message/2954754#2954754
This started in LR 3.0 and was not fixed in LR 3.2. No fixes or workarounds have been found by other users, but the bottom-line seems to be that some images have some corrupt metadata that the Library Filter cannot "swallow". Some users were able to use the filter in certain folders, but never in others (that presumably have pics with "bad" metadata).
Try to enable the Library Filter with filtering by keywords in some of your top-level folders to check if it works in all/some/none.
I would advice all users that can consistently reproduce Library Filter crashes, file bug reports and send their catalogs with a clear description of the problem and steps to reproduce to the Adobe team ([email protected]) for inspection and possibly future fixes.

Tutorial Announcement .:: Searching News Using Keywords ::.

hello friends
Today i made this new tutorial about searching database using "KEYWORDS", searching by keywords will give you the ability to search through many tables in your database, even in one or more fields in the same table.
when a searcher type a word, or even complete phrase, the results will be specified to this word or phrase.
For example if you searched about the word "News", and it mentioned in the news title and news content in tow records, these two records will appear in the search results.
Results,,, results will be something very advanced, amazing, you can say it`s 70% of MX SiteSearch options.
Also i included small script that will be very helpful showing the full details page URL dynamically, specially in the results page, this script automatically detecting the Host name, Site name, so it will be very easy to show the full path to the keyword results details page.
This tutorial will considered as a part of the "news_system" tutorial, and the search application will be included to the news system for more convenient for the reader...
Requirements:
- we will create 2 pages:
1- search.php "the search form".
2- results.php "the results page".
- Note:
* The search page will included with the entire news system script as an external file, don`t put anything else in this page except the search form, and it will included within the head section.
:: Watch Tutorials ::
:: Online Demo ::

Masking? Rotsoscoping? I can think of a million ways to create separated layers or mattes and then duplicate the layer and invert the masks/ matte, but if you never have used that stuff before, you will hard-crash on concrete and not get very far, I'm afraid. It takes at least a bit of practice to produce a clean matte. As a palce to start you may get by suing the Rotobrush and see, if it produces clean enough edges, but if not, it's proably better to scrap the idea before eitehr ending up with a bad result or not meeting your deadline...
Mylenium

Is there a way to open the last file I used in InDesign/Illustrator/Photoshop when I open the app

I want to create a shortcut (Win7) that will automatically open the last file I used in the above apps when I open the app. Is there a command line switch like /r or /l that does that?

Thanks, your point is well taken... It would be nice, though, to have the ability to sort a "Last Used" column in iTunes and select a bunch of apps to remove in one shot.

I use iMac desktop. I can't save web pages as PDF file by using Firefox, but by Safari is fine.

I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothing inside. Then I tried to save email as a PDF file by using Safari browser. And I got a complete and sucessful PDF file. I usually save web pages or web mail, online receipt as PDF file by use Firefox. But since I have updated to the new version, there were many problems with my Firefox. I tried to restore all my application and made Firefox in the old 3.6.3 version which I used to have no problem. But now still not working.

I solved it for myself: it was my HP smart-web printer crap that was a plug in and add on for firefox that somehow automatically got installed when I upgraded to 5. I disabled both in the add-ons manager, and voila, printing is working.
It seems there are many things, like this and the Google toolbar, that were screwed by the oddly fast update to 5. Looks like Mozilla didn't give anybody any notice! Must've been some really bad security hole.

File maintenance using keywords

Similar Messages

Maybe you are looking for