File may be incomplete or truncated

I just opened some files from my external HD to do some photoshoping and got this warning that the file may be incomplete or truncated, and at the bottom of the image it seems to be corrupted if thats the proper word. What I would like to is know what caused it and how to prevent it. Only a few files out of 500 were affected, but I opened another folder and every image was affected, 400+ images. Then there are folders that are completely unaffected. Thanks, Adrian
iMac G5 Mac OS X (10.3.9)

Here's a discussions about your problem,
http://photoshop911.typepad.com/help/2005/05/howto_fix_aco.html but I suggest you post to a Photoshop forum, you have a better chance of getting an answer.
Good luck,
Miriam

Similar Messages

File may be truncated or incomplete? Help!

I have Mac G5 and Photoshop CS3 When saving I get a message: This document may be damaged (the file may be truncated or incomplete). Continue? I do have Capture one of this machine too.
Can anyone help? I do not get it on any other machines.
Thanks

I'm assuming this is on a local drive, not a networked drive?
Sometime permissions issues can cause strange things in programs on networked drives.
Have you tried a Save As, on another location or folder on your system?

Can't open file "may be truncated or missing"

I have several photos that won't open. They can't even be found by spotlight. I have run disk utility and everything checks out normal. I am getting the following error message from Preview 3.0.4:
Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
In Photoshop CS2, I get this message:
Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).
HELP!
imac g5 Mac OS X (10.4.5) 1.6 processor 1.25 gb memory

gambo74, Welcome to the discussion area!
It sounds like the drive directory is corrupted.
Boot from the DVD that came with your iMac. Open Disk Utility and repair the hard drive.

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

ORA-00332 - archived log is too small - may be incompletely archived

Hi, i have a problem with a physical standby database, the apply process is stoped, the databas is version 9.2.0.7.0 on Solaris 10. I received the the next errors into the alert logfile, What can i do??
Thanks for your help.
Regards.
Media Recovery Waiting for thread 1 seq# 16958 (in transit)
Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16958.dbf
Media Recovery Waiting for thread 1 seq# 16959 (in transit)
Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16959.dbf
Media Recovery Waiting for thread 1 seq# 16960 (in transit)
Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16960.dbf
Fri Aug 24 06:57:37 2007
Media Recovery Waiting for thread 1 seq# 16961 (in transit)
Fri Aug 24 16:51:51 2007
RFS: Possible network disconnect with primary database
Closing latent archivelog for thread 1 sequence 16961
EOF located at block 102401 low SCN 1510:-1868154783 next SCN 1510:-1868154783
Latent archivelog '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf'
If you wish to failover to this standby database, you should use the
following command to manually register the archivelog for recovery:
ALTER DATABASE REGISTER LOGFILE '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf';
Fri Aug 24 16:51:51 2007
Errors in file /sfw/oracle/admin/dbnte01/udump/stnte01_rfs_15414.trc:
ORA-00367: checksum error in log file header
ORA-00332: archived log is too small - may be incompletely archived
ORA-00334: archived log: '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf'
ORA-12161: TNS:internal error: partial data received
Fri Aug 24 18:58:05 2007
Fetching gap sequence for thread 1, gap sequence 16961-16961
Trying FAL server: (DESCRIPTION=(ADDRESS_LIST = (ADDRESS=(PROTOCOL=tcp)(HOST=sunvk05)(PORT=1521)))(CONNECT_DATA=(SID=dbnte01)(SERVER
=DEDICATED)))
Fri Aug 24 19:03:40 2007
Failed to request gap sequence. Thread #: 1, gap sequence: 16961-16961
All FAL server has been attempted.
Fri Aug 24 21:07:24 2007
Shutting down instance: further logons disabled
Fri Aug 24 21:07:30 2007
MRP0: Background Media Recovery user canceled with status 16037
Recovery interrupted.

Somehow your archivelog file got corrupted and it was not possible to apply it to the stand by database, check if the requested sequence still exists on the active database and apply it manually.
~ Madrid

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

An output module failed. The file may be damaged or corrupted.

Whenever I try to render something in After Effects CC 13.1.1, an error message pops up, saying "After Effects error: Rendering error while writing to file '[not going to disclose]' An output module failed. The file may be damaged or corrupted (-1610153464)."
Screenshot of the error message:
I tried reinstalling QuickTime (7), repaired it, updated After Effects to the latest version(as I am writing this), checked firewall software, and used other formats such as AVI.
Adobe Media Encoder (CC 2014-latest version) won't work with me, either.
I sent the composition to Adobe Media Encoder, and this is what I got, no progress here.
Screenshot:
It took a while to connect to the dynamic link server, and failed.
This is a log of what has happened in Adobe Media Encoder.
- Source File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\tmpAEtoAMEProject-Pink Intro1.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\pinkcoverart_AME\Pink Intro.mp4
- Preset Used: YouTube HD 720p 29.97
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 5.00 Mbps, Max 5.00 Mbps
- Encoding Time: 00:00:12
06/29/2014 02:29:14 PM : Encoding Failed
The Operation was interrupted by user
(no need to worry about the above part)
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.wmv
- Preset Used: Custom
- Video: 1280x720 (1.0), 29.97 fps, Progressive
- Audio: Windows Media Audio 10 Professional, 96000 Hz, Stereo, 24 bit
- Bitrate: CBR, 2 pass, Max 10000.00 kbps
- Encoding Time: 00:01:42
11/22/2014 12:24:39 AM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage1.aep
- Output File: C:\Users\Default.BronyGue\Videos\chilledup.mpg
- Preset Used: Custom
- Video: 1280x720, 29.97 fps, Progressive, Quality 75
- Audio: MPEG Audio, 384 kbps, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 Mbps
- Encoding Time: 00:00:11
11/22/2014 12:52:11 AM : Encoding Failed
The Operation was interrupted by user
- Encoding Time: 00:00:51
11/22/2014 12:53:51 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Encoding Time: 00:00:46
11/22/2014 08:39:46 AM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
- Source File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\tmpAEtoAMEProject-montage4.aep
- Output File: C:\Users\Default.BronyGue\Documents\not done\moddedchill_AME\montage.mpg
- Preset Used: Match Source - High bitrate
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:00:00
11/22/2014 10:06:45 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
I need some help! Any solutions?.
Computer Specs:
AMD FX-6300
8GB 1600MHz DDR3 RAM
NVIDIA GeForce GTX 650 Ti BOOST
1TB 7200RPM Hard Drive
Windows 8.1 Update 1(with latest updates)
EDIT(11/23/2014 8:31PM PST): For some reason, other projects work for me just fine. I am not sure why it is not working on one project.
Screenshot of a new project other than this I am rendering at the time of writing this edit:

Can other projects can output to the same output location? Yes
Can other projects render with the same render settings (codec, format, etc.)? Yes.
If you create a new composition and just add a solid layer to it with no effects in the same project does it render? No. I still get the error.
Can you render that brand new comp with the same render settings, output settings, output location etc.? Yes.
If so, what effects are present in the offending comp? Twixtor Pro in all the cinematics/clips, Motion Tile and Transform for pan/crop & wiggle, Magic Bullet Looks and Bad TV Warping preset with just Wave Warp & Venetian Blinds for color correction, Gradient Ramp for text, Bad TV Warping preset with everything for effect, Transform for fade in/out, and ReelSmart Motion Blur v4.1.2 for motion blur.
Also, what scripts are you using? Just the Move Anchor Point script I found from one of Mt. Mograph's videos, Summit 16 - 2.5D Minecraft Steve - After Effects - YouTube.
Have you ever installed any third-party codec packs? (I've heard of some codec packs causing weird issues like this.) Yes, (not everything I have, just everything I can think of and find) I have K-Lite codec pack, Fraps, x264vfw, and Xvid MPEG-4 codec.

Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142

Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda

Can't open vcf file. "The file may not exist ... Out of memory or system resources"

Trying to open a vcf file (vCard) from a user. After double-clicking file, get message:
Cannot open file: C:\folder\filename.vcf. The file may not exist, you may not have permission to open it, or it may be open in another program. Right-click the folder that contains
the file, and then click Properties to check your permissions for the folder. Out of memory or system resources. Close some windows or programs and try again.
I have Outlook 2010 with SP2.
Similar error, different problem. Has workaround:
http://community.office365.com/en-us/f/172/t/198029.aspx
I turn OFF cached exchange mode. I double-click the vcf file, it opens fine.
I turn ON cached exchange mode. I double-click the vcf file, I get the erorr message again.
We have hosted Exchange, so we can't turn off cached exchange mode in Outlook.
Is this a bug? Anybody know of a fix?
By the way, if I save one of my contact as a vcf file
and double-click it, it opens fine.

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

[MX 2004} Can't upload! The file may not exist, or there could be a permission problem

I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?

Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

When I click email links on firefox, it won't open my AOL email client to continue, I get "The file may not be supported by AOL, AOL will try to open it as a text file if you choose to continue" how to fix?

When I click email links on firefox, it opens AOL, but comes up like this.. "The file may not be supported by AOL, AOL will try to open it as a text file if you choose to continue" how to fix? and yeah, I know, ditch AOL and all that good stuff, but I have so many things tied into my email address that it's not in the cards atm..
Thanks!
*Chris

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

File may be corrupt ore not recognised by Powerpoint

My bosses powerbook, suddenly does not want to let him move some pictures from iphoto into powerpoint or word. It comes up with the message
'The file may be corrupt, in use, or of a type not recognised by Powerpoint'.
This is even on pictures that previously could be moved over ok. a number of pictures are ok, but new ones, which are from a new camera (none of these work), and some of the old ones don't transfer. I can look at all the the pictures ok in iphoto, preview, but can't in Office. If I open a problematic picture in Preview, and then 'save as' and overright the existing picture, then it will import it into Office programmes ok.
Has anyone else encountered something similar? Help!
I'm using Office X version 10.1.6
Justyn

I don't think it's a permissions issue or you'd get a different message but try manually reset the ownership and permissions for the iPhoto Library folder as follows:
Setting Permissions for iPhoto Library Folder
1 - Select the iPhoto Library folder and type Command-I.
2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
3 - Then click on the "Apply to enclosed items..." button.
When you export a photo to the desktop can it be move it from there OK? Move one to the desktop and bring up the Info pane on it, Command-I. Then under "Open with" set Preview as the default application. Then click on the "Change all" button. Good luck.

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG REASON: com.apple.ImageCaptureCoreError- 9905. WHAT'S UP WITH THAT? Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok, then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
Or, try downloading all the pics using image capture and then import from the download folder.

File may be incomplete or truncated

Similar Messages

Maybe you are looking for