File monitor failed to start. Reason: Invalid input parameters
Hi All.
Just a quick one here. I've done this lots of times before, but I am working on one environment (SCO 2012 R2 UR2) where I am trying to set up a simple Monitor File activity. However, the output I am getting from this during testing is as follows:
File monitor failed to start. Reason: Invalid input parameters.
I have seen a couple of posts around for Opalis, but these do not look to apply.
Has anyone come across this in Orchestrator rather than Opalis, and if so, is there a resolution?
TIA
Cheers
Shaun
Hi Shaun,
the reason for this error "File monitor failed to start. Reason: Invalid input parameters."with the "Monitor File! Activity might be:
Invalid folder or no access to folder (if you experience between running with Orchestrator Runbook Service and Runbook Tester see
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester)
No Filters specified in tab Details
No trigger condition specified in tab Triggers
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu
Similar Messages
-
Office Professional Plus 2013 - Click to run fails to start - errror message "Couldn't install"
I have just purchased an new PC with 8.1, and have also purchased Office 2013 via the HUP. Now I am trying to start the download. After clicking on the link in the email, a "Click to Run" file is downloaded. When I open the file, it fails
to start the Office 2013 download. I get the message "Couldn't install"
However after trying several options including compatability and administrator options, I still get the message "Couldn't install".
I have checked for compatibility and all checks OK
I am looking forward to an ideas :)
Thanks in advance :)
RichardHi Richard,
Thanks for your question. I believe that "Couldn't install" is not the complete error message, it would be great that you can copy and paste the entire message here. It's necessary for the investigation.
Please first check if you have any pre-installed version (Preview edition) of Office on your PC. If yes, please try to use
Microsoft Fix It tool to remove any traces of Office from your computer, then try the installation again:
http://support.microsoft.com/kb/2739501
You might also need to follow the manually steps mentioned on the same page to delete the related reg keys/folder structures, and then try again.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support -
SOAP - XI - RFC - Input parameters
Hi,
I'm trying to develop a SOAP-> XI -> RFC scenario and now i'm facing the following problem: I'm invoking a RFC through XI but for some reason the input parameters are not reaching the RFC. The RFC response indicates that RFC is not receiving any input parameters from XI.
I've already cleared the cache and de-activate and re-activate the rfc receiver communication channel.
Anyone has a hint for this?
Thanks in advance,
Pedro LealPedro,
Few weeks before I also faced the same issue. I'm not sure if it's bug or not. You are directly sending the RFC structure using SOAP client is it? I mean your Inbound and Outbound Structure are same.
Do onething, just do the mapping and check, It will work for sure!
raj. -
Dear Experts,
I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
‘%Error: Config file transfer failed – Unknown error –refer to log
Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
WLC code: 7.4.100.0
PFA as the error snippet.
Thanks and Regards,
AdnanHi Kaneswaran,
Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this.
Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue.
Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
Best Regards,
Muhammed Adnan -
Adobe Active File Monitor V12 will not start/ program crashes & other errors
I have recently installed Version 12 of Photoshop Elements on Windows XP Pro (service pack 3).
If I try to specify "Watched Folders" PE tells me to start the Adobe Active File Monitor in Admin Tools - Services.
If I try to manually start this service it reports that:
"Could not start the Adobe Active File Monitor V12 service on local computer Error 1067. The process terminated unexpectedly"
If I look at the Event Viewer in XP there are numerous errors reporting that this service has attempted to start automatically with the following error:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 30/11/2013
Time: 17:53:01
User: N/A
Computer: NICOLA
Description:
Faulting application PhotoshopElementsFileAgent.exe, version 12.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x73657275.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 50 68 6f ure Pho
0018: 74 6f 73 68 6f 70 45 6c toshopEl
0020: 65 6d 65 6e 74 73 46 69 ementsFi
0028: 6c 65 41 67 65 6e 74 2e leAgent.
0030: 65 78 65 20 31 32 2e 30 exe 12.0
0038: 2e 30 2e 30 20 69 6e 20 .0.0 in
0040: 75 6e 6b 6e 6f 77 6e 20 unknown
0048: 30 2e 30 2e 30 2e 30 20 0.0.0.0
0050: 61 74 20 6f 66 66 73 65 at offse
0058: 74 20 37 33 36 35 37 32 t 736572
0060: 37 35 75
In addition the Photoshop Organiser crashes frequently and If I edit a picture and save it to the stack, it does not appear in the catalogue so I have to manually get the picture and stack it with the original. I assume that these problems are related to the above problem.
My original installation co-existed with Version 3 so I uninstalled this old version then uninstaled and reinstalled version 12. This made no difference to the problem.
Any ideas on this problem?Thanks for that suggestion Michel.
Killing the AutoAnalyzer using these instructions (http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/doe s ) does seem to have solved the problem of edited pictures not being saved to the stack - although I have noticed that since disabling the autoanalyzer, when saving a file, the editor almost always now does not display the option window which allows you to choose if you want to save with the stack etc. It usually only shows the JPEG quality selector window.
Its too early for me to say if making this change has reduced the frequency of crashes but it certainly has not solved the problem with the Watched Folders so Im still looking for a solution to this one. -
Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
ORA-22288: file or LOB operation FILEOPEN failed (The data is invalid)
Dear All,
I am trying to insert a image file (gif) to one of my field.
1. Here is my table structure and trying to insert gif image file to PIC file.
SQL> desc cis2.david_pic
Name Null? Type
ID VARCHAR2(5)
PIC BLOB
2. I using sql command to create directory and the path is pointing where the DB
server was installed.
SQL> create or replace directory MY_FILES as '\\hkqaa-db1\TEXT_IMPORT';
3. Written a script to insert empty blob first and than trying to use the dbms_lob.fileopen
to upload the gif file.
SQL> declare
2 l_blob blob;
3 l_bfile bfile;
4 begin
5 insert into cis2.david_pic values ( '1', empty_blob())
6 returning pic into l_blob;
7 l_bfile := bfilename('MY_FILES', 'bess_signature.gif');
8 dbms_lob.fileopen(l_bfile);
9 dbms_lob.loadfromfile(l_blob, l_bfile, dbms_lob.getlength(l_bfile));
10 dbms_lob.fileclose(l_bfile);
11 end;
12 /
4. After I ran my script I got this error message.
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The data is invalid.
ORA-06512: at "SYS.DBMS_LOB", line 475
ORA-06512: at line 8
Can any tell me what wrong? is this the way to insert image?
ThanksKnow this is an old post: (for sharing sake.)
Please try avoiding
1. the 'hyphen' in between the path (hkqaadb1 instead of hkqaa-db1)
2. Give direct path like 'C:\TEXT_IMPORT' instead of network path.
create or replace directory MY_FILES as '\\hkqaa-db1\TEXT_IMPORT'; -- Not working.
create or replace directory MY_FILES as 'C:\hkqaadb1\TEXT_IMPORT'; -- Working.
and this worked fine.
Edited by: Arunan.KL on Mar 23, 2011 5:04 PM -
I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?
What drivers?
-
My iTunes became corrupted. I tried to upgrade to a new version, but things only got worse. Some of the error messages I received:
APSDaemon - Unable to locate component
This application has failed to start because MSVCR80.dl was not found. Rinstalling the application may fix this problem.
So, I deleted my downloads and past attempts and any .dl files I had and tried again. Now I get this message:
Today: Apple Mobile Device failed to start. Make sure you have sufficient privileges to start system services.Hi ahhan13,
Welcome to the Support Communities!
The article below may be able to help you with this.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
- Judy -
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
-
That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Failed to start essbase process: number of back up files exceeds limit
Can someone help to take a look at this?
More details is logged in bug 11887650
Failed to start essbase process, message in log file:
11/03/18 11:44:10 Start process
Info: Essbase is reducing the number of soft file descriptors because the 32K limit has been exceeded. Exceeding the limit may significantly increase application load time.
Environment variable [HYPERION_LOGHOME] is set - use it to define Log location folder.
Log location is [u01/APPLTOP/instance/BIInstance/diagnostics/logs/Essbase/essbaseserver3/essbase].
ODL log location is [u01/APPLTOP/instance/BIInstance/diagnostics/logs/Essbase/essbaseserver3/agent-log].
[Fri Mar 18 11:44:10 2011]Local/ESSBASE0///4072736080/Warning(1056807)
The number of back up files found on disk (40) exceeds the configured limit which is 2
[Fri Mar 18 11:44:10 2011]Local/ESSBASE0///4072736080/Info(1051283)
Retrieving License Information Please Wait...
[Fri Mar 18 11:44:10 2011]Local/ESSBASE0///4072736080/Info(1051286)
License information retrieved.
65535 Essbase user 65535 Planning user system
Logging configuration class "oracle.core.ojdl.logging.LoggingConfiguration" failed
oracle.core.ojdl.logging.LoggingConfigurationException: ODL-52050: unable to process file '/u01/APPLTOP/instance/BIInstance/Essbase/essbaseserver3/bin/logging.xml', XML parse exception (line: 5, column: 38): org.xml.sax.SAXParseException: Attribute "class" is required and must be specified for element type "log_handler".
Mar 18, 2011 11:44:14 AM oracle.security.jps.az.internal.common.scanner.PolicyChangeScannerThread run
INFO: Policy store cleanup thread started.
Mar 18, 2011 11:44:14 AM
INFO: EPMCSS-CSS Fusion system initialized successfully. : [2724 ms]
[Fri Mar 18 11:44:14 2011]Local/ESSBASE0///4072736080/Info(1051199)
Single Sign-On Initialization Succeeded !
[Fri Mar 18 11:44:14 2011]Local/ESSBASE0///4072736080/Info(1051639)
Info: Essbase is reducing the number of soft file descriptors because the 32K limit has been exceeded. Exceeding the limit may significantly increase application load time.
Essbase 64-bit - Release 11.1.2 (ESB11.1.2.1.0B154)I am an infrastructure idiot (I have all kinds of other idiocy available as well -- I am versatile), but I found:
http://troubleshooot.wordpress.com/2010/05/26/essbase-login-is-not-working/
To my ignorant eyes, this looks like some kind of *nix-centric issue.
If the post doesn't help, perhaps one of the infrastructure guys will chime in.
Regards,
Cameron Lackpour -
Invalid console application caused WLS to fail to start
We are using WLS 6.1 SP3 on W2K. In our config.xml, there is no reference
to
a console app., after shutting down the WLS using weblogic.Admin, the
config.xml
has an entry like this:
<Application Name="console-1"
Path="d:\bea\wlserver6.1\config\agileDomain\applications">
<WebAppComponent Name="console" URI="console.war"/>
</Application>
The name 'console-1' caused WLS to fail to start. Any hints. I don't
believe we have this problem in
WLS 6.1 SP2.
Thanks in advance,
Hien
=================================================================
<Aug 5, 2002 12:41:13 PM PDT> <Error> <Management>
<InvocationTargetException setting attribute Deployed on MBean
agileDomain:Location=himalayaServer,Name=console-1,Type=ApplicationConfig to
value true. Method: public void
weblogic.management.mbeans.custom.Application.setDeployed(boolean) throws
weblogic.management.DeploymentException,weblogic.management.UndeploymentExce
ption
weblogic.j2ee.DeploymentException: Cannot deploy
WebAppServletContext(1274224,console,/console) on himalayaServer because
WebAppServletContext(6208755,console,/console) is already registered for
path /console
at
weblogic.servlet.internal.ServletContextManager.registerContext(ServletConte
xtManager.java:123)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:450)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:78)
at weblogic.j2ee.Application.deploy(Application.java:271)If you send me your entire config.xml file and your application.xml,
and application-config.xml (if you are using one) I can look at it for
you.
>
=================================================================
<Aug 5, 2002 12:41:13 PM PDT> <Error> <Management>
<InvocationTargetException setting attribute Deployed on MBean
agileDomain:Location=himalayaServer,Name=console-1,Type=ApplicationConfig to
value true. Method: public void
weblogic.management.mbeans.custom.Application.setDeployed(boolean) throws
weblogic.management.DeploymentException,weblogic.management.UndeploymentExce
ption
weblogic.j2ee.DeploymentException: Cannot deploy
WebAppServletContext(1274224,console,/console) on himalayaServer because
WebAppServletContext(6208755,console,/console) is already registered for
path /console
at
weblogic.servlet.internal.ServletContextManager.registerContext(ServletConte
xtManager.java:123)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:450)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:78)
at weblogic.j2ee.Application.deploy(Application.java:271) -
When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!
Maybe you are looking for
-
Battery drain in ipad 2 since iOS 8.1.1 update
I recently updated my iPad 2 and iPhone 4s to the new iOS 8.1.1. Have noticed a significant reduction in battery life on my iPad ever since. I have turned off bluetooth, all notifications, reduced brightness. I've pretty much turned off all that I ca
-
Jdeveloper PJC wizard demo not working and how to debug?
Hi, Has anyone try the follow the steps in PJC wizard demo in http://www.oracle.com/technology/sample_code/products/forms/index.html? And is it working? I tried created the demo.securefield jar file in Jdeveloper in add the package in implementation
-
Hi Members, I have an combo box in a user designed screen. I have to list the sales order number for an chosen customer in the combo box. My problem is that all the values are not listing for that customer. Sample coding is as follows: strSQL = "sele
-
Been using AE CS5 and loving it, but wish there were a couple of more features... -- shadow color for 3D lights. not only control the color of the light, but of the shadows they create (like in Lightwave and other 3D packages) -- more user friendly
-
Hi Folks, I am new to the JMS adapter, do i need any special knowledge on JMS. In what situations we go for JMS adapter. Explain me the SENDER and RECEIVER JMS adapter. i.e. different TRASNPORT PROTOCOL and differece between various TRANSPORT PR