File name replaced with Tilde (~), name already exists error

When exporting jpg files in Lightroom 4 I've recently had an issue with some of the files containing a tilde (~), the 43rd file in the series often gets it as well as a few others. So in the series one might be named 43-MA~1.jpg instead of the 43-Maegan-details.jpg that I originally named the file.
When I've tried to rename these files from the finder I get the error "name already exists". If I rename it to something totally different it works but if I then try to rename it the original filename I wanted it gives me the error again or reverts to the name with the ~.
I'm running 10.6.8, and the problem has been happening the past few weeks but I've never had the problem before. I can't figure out what is causing the problem and it's not every export but it's a huge hassle to try and rename the files.

This is the one error message that I have gotten in years with Encore. In my case, I had created a Project to be used as a "template," and had done the layout, Imported the common Assets, and then used this as the basis for a 17 DVD set, just Importing the unique Assets to each. Everything went perfectly, until disc 15. Maybe I was sloppy, as I had just completed 14 such Projects that day, but when I went to Build, I got that error. I tried un-Linking and re-Linking Assets, and checked all Menus. Nothing - just that error. Flushed Media Cache, and only the error. I posted here, with the details and asking for ideas.
In the meantime, I just grabbed my "template" Project and Imported those same, unique Assets. Used my altered Menus from bad Project and did my linking, exactly (or so I thought) as I had just done. This time, the Build was successful and # 15 thru 17 went without a hitch.
I had Saved that bad Project, and several folk offered suggestions. I tried them all, but never could get it to Build. I always got that error. I finally gave up testing and chalked it up to OE on my part, but I never figured out what I had done wrong, as I really thought that it was by the numbers.
Based on my experience, I would just start a new Project, being careful in the workflow. That was the only thing that worked for me.
Good luck,
Hunt

Similar Messages

Susbtitution Variables in rules file to replace a member name with another

Hi everybody,
Can I use substitution variables to replace a member name with another name in rules file?
Please let me know if we can use substitution vars.
Essbase version :11.1.2
Thanks,
K.as

Are you the same guy?
http://www.network54.com/Forum/58296/thread/1287447433/Susbtitution+Variables+in+rules+file+to+replace+a+member+name+with+another+name
The answer is still, "No".
Regards,
Cameron Lackpour

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

EXPDP generates new dmp file and reports "file already exists" error

Hello everyone,
Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
ORA-27038: created file already exists
Additional information: 1
Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
Your advice is highly appreciated.
Thanks.
Edited by: 904668 on Dec 27, 2011 8:47 AM

i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

HT1229 How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what.

How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.

The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD

A key/value pair with this key already exists in the store

Hi all,
In the installation of PI components on the AS ABAP+ AS JAVA with finalization of the Java Addin the iam facing this problem :
In short it mentioning that the " A key/value pair with this key already exists in the store.", Please see below for more information....:
CJSlibModule::writeWarning_impl()
Execution of the command "/opt/java1.4/bin/java -classpath
/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedli
b/launcher.jar -Xmx256m -d64 com.sap.engine.offline.OfflineToolStart
com.sap.security.core.server.secstorefs.SecStoreFS
/usr/sap/PID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/PID/SYS/global/security/lib
/tools/iaik_jsse.jar:/usr/sap/PID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PID/
SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/PID/SYS/global/security/lib/tools/w3c_ht
tp.jar:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/l
ib:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/share
dlib:/oracle/client/10x_64/instantclient/ojdbc14.jar insert -s PID -f
/usr/sap/PID/SYS/global/security/data/SecStore.properties -k
/usr/sap/PID/SYS/global/security/data/SecStore.key admin/host/PID tern" finished with return
code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR      2007-02-15 18:35:29
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log
file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2007-02-15 18:35:29 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure
_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR

Hi Kamalakar
I think this problem happens due to wrong content of SDMKIT.JAR - incorrect crypto SDA is deployed.I dont know the installation procedure you followed because normally this error wont come.
I would rather suggest a work around seeing your problem
<b>Edit the keydb.xml exchanging [ERROR] with [OK]</b>
Follow the above step and restart your installation.
Do not forget to reward points:

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

My NEF files were replaced with XMP files

After processing my NEF files in Adobe PE's Camera RAW 6.5, my NEF files were replaced with XMP files. I checked the Recycle Bin and they are not there. I did nothing different from the past, using Open Image to move the file into the Editing module of PE. Is there a natural place they would have gone?

An alternative aproach would be to import as DNG instead of leaving the RAW files in native Nikon NEF format. DNG can be saved with any adjustments made in ACR, and does not need the XMP sidecare file. It is also a good idea to do any file moving from within Bridge so as not to lose track of any sidecar files. I don't use Lightroom, but would imagine file management is even more important with Lightroom.
BTW I am surprised that other than Noel's underlining the fact that you are using Elements, that no one has asked why you are asking in a Photoshop forum. Not that you aren't welcome Don.

Warning:Null charecters(00H) contained in the file was replaced with spaces

Hi,
i am creating dat file in that at the end of each line i am adding 10 spaces(i.e 00a0) and end of line charecter, than sending to FTP server, but when i am opening file it is giving warning message : Null charecters(00H) contained in the file was replaced with spaces . Pls help me.
Regards,
Manoj
Edited by: manoj kv on Oct 27, 2011 7:07 AM

Hi,
Instead at end of each line add a constant of type char with length 10. And then do a carriage return. Check if you still get the error.
Regds,
Madan...

Library files files are replaced with new files

Almost everyday, when i start iTunes my library files are replaced with new files & then i need to replce the new ones with my backup set

There are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one.
Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

Getting Object already exist error when installing adobe reader

I'm unable to install any Adobe application programs on my Windows 7 machine. I tried Adobe Reader XI, Lightroom 5.6, Photoshop CC, etc. All resulted with "Object Already Exist" error. I searched on Adobe site for fix, and there was one to delete Crypto file. However, this resulted with the same error. How can I install Adobe Reader?

Your approach is correct in identifying the error. I used ProcMon from Sysinternals (now Microsoft) and came up with the following events leading up to "Object already exists" error. The error occurs after opening C:\Users\%account%\AppData\Crypto\RSA\S-1-5-....... file. If the Crypto directory is missing, MSIEXEC.EXE will create along with RSA subdirectory and file name starting with S-1-5..... There were five NAME NOT FOUND events, and their sequence is
     Windows Installer Logging item in HKLM\SOFTWARE registry
     C:\Users\%account%\AppData\Local\Temp\MSI7058d.LOG (this file was created at the next step)
     Windows Installer Debug item in HKLM\SOFTWARE registry
     FontSubstitution in HKLM\SOFTWARE registry
     CTF Known Classes item in HKLM|SOFTWARE registry
I don't know which one causing the error, but my suspicion is the last one. But I don't know how to fix it. Is there anyone who can give me insight to what is happening and how to fix it?

I'm getting an 'objects already exist' error when trying to download itunes

My iPhone 6 wouldn't connect to iTunes since it need to update. So I went to uninstall iTunes and all it's contents. I went to download iTunes again, but when I did I received an 'Object already exists' error. I went to look at more information on the Apple website and I tried everything I could but I keep receiving the error. I uninstalled anything related to Apple on my computer and I went to the Program Files folder on my computer and found nothing related to Apple so I'm pretty sure I deleted all the data already. I really need help with this. I have a Windows 7 computer.

For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Illustrator CC graph file is opening with an "Offending Operator: inf" error.

Illustrator CC graph file is opening with an "Offending Operator: inf" error and then proceeds to open a file with half to all of the data and elements missing. How Do I fix that or can it be fixed? One in ten graph/chart file I do with Illustrator CC is opening like that. I can open the file in CS6 Illustrator but it flattens the file so that I lose all my data and layers. The full error reads like this:
Offending Operator: ing
Context:     % 0 1 0 0 0 Xy
                  % 4 0 Gx 6 Gr GX
                  % 1 -1 3 0 -1 Gf
                  % 0 O
                  % inf
Is this something with CC Illustrator graph tool, character styles or what?
Thanks anyone if you can help.
Ellen

Same problem here, except now all my charts that have been opened and saved, since I first had this problem, no longer open correctly. I'm afraid to waste anymore time recreating multiple files and then have the same thing happen over again. I always save an Illustrator version with the editable data in the charts and then a PDF version for artwork placement. I noticed in the error alert it had one of the colors in the color pallet listed (Open Market Green). I opened the erroneous now blank file and tried removing the color from the pallet then save the file but that then caused AI to crash. When I try to open any of the AI (CC) files in 5.5 I'm unable to view the none PDF compatible artwork.

You cannot add a job with a duplicate name, as a web service already exists with name ... please rename the job and try again

We are attempting to add a web service job and getting a duplicate name issue. I believe we have a caching issue where this job name may already exist but we are unable to see it on the web services status page.
Is there a data services repository database table where I can find these web services jobs listed and clean it up from the backend?

There is no option there that shows me if it is being used as a web service. Here is my issue with some screen shots.
I look at my current web service enabled jobs looking for B_JOB_CP_MDR_to_GW_EMP but it is not in the list.
I attempt to add it from repository DWXDS9
It throws an error and tells me there is already a web service with this name...
Now there has got to be an internal data services table somewhere that has this job listed as a web service. I am just trying to figure out what that table may be to determine if we can do some type of cleanup on it so we can add this job again as a web service (so it is visible to us).

Creating file on network with same name

Hello All,
I have created the A0001BOE20060001.txt file on my machine & i want to create same file with same name on the different machine,
i m able to copy all data in that file & recreate it on the server but i have problem with how to GET same file Name
As i m creating a new file & writing data on the 1.txt which i m creating on the server
How should i recognize the file name & create the same file on the server????

Is this on Windows?
I believe that java.io.File works with UNC paths. For example, if you have a network resource on the share myshare on machine my-pc, you could do something like:
File f = new File( "\\\\my-pc\\myshare\\myfolder\\myfile.txt" );
Note that you have to escape backslashes. You'll also want to be sure that you have permission to access the share - it won't prompt you for a password, so you must have already authenticated using Explorer or net use.
Thanks,
Brian

File name replaced with Tilde (~), name already exists error

Similar Messages

Maybe you are looking for