File name save procedure

Maybe a dumb question, but here goes. I sometimes have a problem when navigating through folders in the Save window. When my coordination or vision is less than optimal, I sometimes accidentally click on another file name which then changes the name of the file I am saving. I then must start the save process all over again or move back up to the text field to type in the correct name again. Annoying to say the least. Is there any way to change this behavior?
Thanks,
John
OSX 10.3.9

Hi John,
you are welcome. You might want to tell Apple how much you dislike this feature by giving them feedback:
http://www.apple.com/macosx/feedback/
Also, please remember to mark this post as answered as this will help other people with the same question.
Happy computing,
-Petra

Similar Messages

Unsaved Changes in File:[File name] Save before closing?

Hello!
FM 9 on Win 7 Pro.
I am a long-time FM user.
I am trying to open files that I could successfully open before I left work yesterday. I can open FM, and open FM books. When I try to open an FM in a book, or an FM file not in a book, I get this message:
"Unsaved Changes in File:[File name] Save before closing? Yes No Cancel.
It doesn't matter which one I pick (Yes, No, Cancel), FM next shows this message:
FrameMaker 9 Application has stopped working. Windows can check online for a solution to the problem.
Check online for a solution and close the program
Close the program.
View problem details
It doesn't matter what file I try to open (recently worked on files, and files I haven't touched for some time). Same messages, no matter what.
I have tried to update the book (the update seems to happen), saving the changes, and then try to open. Same error messages. I had hoped that updating the book would clear any possible cross-reference problems.
I have tried several re-boots, nothing works.
Help!
Thanks in advance for any and all help!
Terri

Since its happening with every file, my suspicion is that your application data is corrupted. Try this:
close down framemaker.
delete the following directory: C:\Users\[user]\AppData\Roaming\Adobe\FrameMaker\
reopen framemaker and see if the problem is reproducible.

Problem in dynamically file name generation procedure

Hi All,
          I had scenario where i need to generate target filename dynamically for that i'm using UDF mentioned in the below blog :
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
to generate filename for target file adapter.
UDF used:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "HeaderFieldOne");
conf.put(keyHeader1, a);
return "";
While giving filename in receiver file adapter what should be the filename given in receiver file communication channel?
Regards,
VKG.

Hi,
       My scenario is asynchronus scenario. When i use that messaging tool i'm getting following error:
There was an error processing your request.
com.sap.aii.af.ra.ms.impl.app.AdminException: Reading Messages from Archive failed, due to: null
With the following stack trace:
                 java.lang.NullPointerException
     at com.tssap.dtr.client.lib.protocol.Connection.(Connection.java:304)
     at com.sap.archtech.archconn.UnqualifiedArchSession.(UnqualifiedArchSession.java:33)
     at com.sap.archtech.archconn.ArchSessionFactory.getSession(ArchSessionFactory.java:62)
     at com.sap.aii.af.ra.ms.impl.core.archiving.ArchivingJobController.getMessageBeans(ArchivingJobController.java:1380)
     at com.sap.aii.af.ra.ms.app.ArchivingBeanImpl.getMonitorBean(ArchivingBeanImpl.java:171)
     at com.sap.aii.af.ra.ms.app.ArchivingRIObjectImpl0_0.getMonitorBean(ArchivingRIObjectImpl0_0.java:868)
     at com.sap.aii.af.ra.ms.app.ArchivingRI_Stub.getMonitorBean(ArchivingRI_Stub.java:1518)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
     at java.lang.reflect.Method.invoke(Method.java:391)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy348.getMonitorBean(Unknown Source)
     at jsp_monitor1228729032638._jspService(jsp_monitor1228729032638.java:464)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

@stadlock – I think I know what you mean…
You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
What you can do against that?
1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
2. After the new file name is already there in the export dialog:
Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
Uwe

Logical file name transport

Hi Friends,
I have created logical path and logical file name using FILE Transaction code, the problem was logical Path was saved in transport request and logical file name not saved in Transport request, Could you please help me logical file name save are not in the transport request.
Thanks in advance,
Jayachandran.A

Run transaction FILE, in the menu goto "Table view", "transport", select or create a transport request. In node "logical file name definition, cross client", select your file names and in the menu bar click on "include in request"
Regards,
Raymond

Variable file name through Receiver mail Communication channel

I need to send a file through receiver communication channel with the following name ( YYMMDD schema) . The YYMMDD is current date . I know how to create these file names throug FCC ( file communication channel) , I tried in the same manner to create this file through Receiver Mail CC , but it did not work . If you have any ideas , can you please share with me ?
ABC_MMYYDD.TXT
Thanks.
Ritvik

Hi Ritvik,
Also, Please look at this link and see if it helps you. It is generating variable file name through a UDF
Re: Problem in dynamically file name generation procedure
Best Regards

Parsing a file name and printing a portion to an image

Ive got a script writen for me that reads the file name of the image, creates a new layer , prints it ti the bottom of the image. I was wondering if anyone knew if there is a way to parse only a portion of the file name out and print that to the screen. Below is the relevant part f the code (I think) that selects the text to be printed on the new layer
var myLayerRef = docRef.artLayers.add();
        myLayerRef.kind = LayerKind.TEXT;
        myLayerRef.name = "Filename";
        var myTextRef = myLayerRef.textItem;
if the file name of the image is ; 30090416 0056 , I want to use only the 0056 portion, as the code is written above the whole file name save the extension is written to the image.
Thoughts?????

That didnt seem to work, the same full filename (minus the extension) still prints. Here is more of the script. I tried to attach the whole thing but it wouldnt upload.
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.PERCENT;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = "";
// Set font size in Points
myTextRef.size = 24;
//Set font - use GetFontName.js to get exact name
//myTextRef.font = "TimesNewRomanPSMT";
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 255;
newColor.rgb.green = 255;
newColor.rgb.blue = 255;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 2 , 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
I really appreciate the help.

Dynamic Physical File names on AL11

Hi,
I have the following requirement.
I have almost 25 files to be exported onto AL11 using OpenHub from various infoproviders and I used the "Logical File name" option to do it.
I would like to have the physical file names as " ZINFOPROV_<DATE>_<TIME> " and Infoprovider tech. name should get populated dynamically somehow.
I was looking at the following thread for the same req : Re: Open Hub File name Change
I defined my logical file name definition as
Logical file    Z_SALES
Name            Used for SALES
Physical file   ZINFOPROV_<DATE>_<TIME>
Data format     ASC
Applicat.area   BW
Logical path    Z_SALES
I would like this ZINFOPROV populated dynamically.
Any have any inputs/suggestions.
Regards,
Kumar

Hi Kumar,
You have a very good question and also shown the viewer of your post the way forward. Well i got your answer from your question only. Considering <DATE> as one kind of literals, you need a literal to identify the infoprovider as one part of your filename. Now my answer is not direct resolution but it may lead you to your answer. Here are the list of other literals that might be of use to you.....
Extract from the help.......
Physical path name
Platform-specific physical path under which files are stored. It most contain the reserved word <FILENAME> as a placeholder for the file name. IT can also contain further reserved words (see below).
Use
The physical path name is used by the function module FILE_GET_NAME at run time to create a complete platform-specific file name.
Procedure
Specify a path. You can include the following reserved words in pointed brackets. These are replaced with current values at runtime.
Reserved Word    Replacement Text
<OPSYS> Operating system in call
<INSTANCE> R/3 application instance
<SYSID> R/3 application name in SY-SYSID
<DBSYS> Database system in SY-DBSYS
<SAPRL> R/3 release in SY-SAPRL
<HOST> Host name in SY-HOST
<CLIENT> Client in SY-MANDT
<LANGUAGE> Log on language in SY-LANGU
<DATE> Date in SY-DATUM
<YEAR> Year in SY-DATUM, 4-character
<SYEAR> Year in SY-DATUM, 2-character
<MONTH> Month in SY-DATUM
<DAY> Day in SY-DATUM
<WEEKDAY> Day of the week in SY-FDAYW
<TIME> Time in SY-UZEIT
<STIME> Hour and minute in SY-UZEIT
<HOUR> Hour in SY-UZEIT
<MINUTE> Minute in SY-UZEIT
<SECOND> Seconds in SY-UZEIT
<PARAM_1> External parameter 1
<PARAM_2> External parameter 2
<PARAM_3> External parameter 3
<P=name> Name of a profile parameter (see Report RSPARAM for valid values)
<V=name> Name of a variable (stored in variable table)
<F=name> Return value of a function module Naming convention for this function module: FILENAME_EXIT_name
<Y=name> Return value of a function module Naming convention for this function module: Y_FILENAME_EXIT_name
<Z=name> Return value of a function module Naming convention for this function module: Z_FILENAME_EXIT_name
Examples
Local directory for temporary files under Windows NT: D:\GLOBAL\ARCHIVE\<PARAM_1>\<FILENAME>
Local directory for temporary files under DOS:C:\TMP\<FILENAME>
Local directory for temporary files under UNIX: /usr/<SYSID>/local/tmp/<CLIENT>/<FILENAME>
Dependencies
The function module for the run-time variable <F=name> must meet the following requirements:
Name
The name must begin with "FILENAME_EXIT_".
Parameter
An export parameter with the name "OUTPUT" must exist. No structure may exist for this parameters.
Import parameters are only supported if they have default values.
Table parameters are not supported.
Valid example: FILENAME_EXIT_EXAMPLE.
I hope this leads you to your resolution.
Regards
Raj
Edited by: Rajesh J Salecha on Oct 9, 2009 1:48 PM - Not able to make it properly formatted...
Edited by: Rajesh J Salecha on Oct 9, 2009 1:54 PM

How can I add form field value to the file name in save as dialog box

I do not want the form to be saved automatically, just want the form to auto populate the "file name" only.
A little background on the forms I want to use: My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" as an example. I would like for a store manager to be able to complete the form, then email the form to the main office (I already have javascript to add field values and form name to the email subject line), once the main office receives it, I want for them to be able to file the pdf electronically on our server. We have mutliple forms that we use so I do not want any of the forms to automatically save anywhere, (at this time anyway) I just want the office personnel to be able to click "save as" (or whatever they will need to click) and the form automatically add certain field values from the pdf they have received, of which will be different each time the form is sent to the office (Date, store #, employee name etc.) in addition to the name of the form in the "File name" of the "Save As" dialog box. The main office employees will decide into which server file the pdf should be saved.
I'm using Acrobat 8 professional, the stores and office personnel use Adobe reader.
One little note: We currently print and file a lot of paper on a daily bases, as soon as I can get this to work, we are going green.
Me and a lot of trees in this will really apprecitate any help you can give with this! :-)

You might want to take a look at the document "Developing Acrobat Applications Using JavaScript" (js_developer_guide.pdf) which is part of the Adobe Acrobat SDK, which can be downloaded here. Read the "Privileged versus non-privileged context" (p. 45ff.). You will find an example for "Executing privileged methods in a non-privileged context". Should be almost exactly what you are looking for.
Small Outline: For security reasons ("the user always has to know what's going on") you are not allowed to use the "Doc.saveAs"-method without the user permission (--> in a non-privileged context). In order to reach the goal of a privileged context you can use a trusted function. You do this by creating a JavaScript file (*.js) in either the Application-JavaScript-Folder (default location on Windows systems: "%ProgramFiles%\Adobe\Acrobat 10.0\Acrobat\Javascripts") or the User-JavaScript-Folder (default location on Windows systems: "%AppData%\Adobe\Acrobat\10.0\JavaScripts"). Add the following content to the new file:
myTrustedBrowseForDoc = app.trustedFunction( function ( oArgs ) {
     app.beginPriv();
          var myTrustedRetn = app.browseForDoc( oArgs );
     app.endPriv();
     return myTrustedRetn;
myTrustedSaveAs = app.trustedFunction( function ( doc, oArgs ) {
     app.beginPriv();
          var myTrustedRetn = doc.saveAs( oArgs );
     app.endPriv();
     return myTrustedRetn;
The developer guide actually wants you to add this content to the existing "config.js" file. I recommend creating a new file, since its easier to deploy in a network. Either way, every client/user who needs to be able to save documents this way, needs this JavaScript Code in his Application/User-JavaScript-Folder.
Within the Acrobat Document, which you want to obtain a certain file name, you can now use the trusted functions "myTrustedBrowseForDoc" and "myTrustedSaveAs" to store the file. To call the trusted functions and deliver the file name you can either you use a form field (button) or you add a new menu item. Add the following JavaScript Action to the button/menu item and change "Roller Coaster" to the name of the field which contains the value which you want to become the new file name:
var fileName = this.getField("Roller Coaster").valueAsString;
try {
     var oRetn = myTrustedBrowseForDoc({bSave: true, cFilenameInit: fileName + ".pdf"});
     try {
          myTrustedSaveAs(this, { cPath: oRetn.cPath, cFS:oRetn.cFS });
     catch(e) {
          console.println("Save not allowed, perhaps readonly.");
catch(e) {
console.println("User cancelled Save As dialog box");
Good Luck!

Excel 2010 missing default suggested file name in Save As dialog box

I’m using Excel 2010 running on Windows 7 (32 bit). When I open a certain file which produces the following message: "A file is in a different file format than its extension indicates", and then go to “Save As” (or “Save”) the
file, the default suggested file name is missing (blank). This didn't occur in previous versions of Excel.
In previous versions, Excel would automatically populate the original file name in to the File Name field.
I have searched all over the net, looking for a way to change Excel so that it will once again populate the file name in this situation.
To reproduce:
Create a new blank workbook
save as type “Web Page”, (i.e. File name: “Blank Example.html”)
Close workbook
In windows, rename file from .html to .xls (i.e. rename “Blank Example.html” to “Blank Example.xls”)
In Excel open renamed file (i.e. “Blank Example.xls”) and click “Yes” when prompted with the “A file is in a different file format than its extension indicates” message.
Do a “Save As” and you will notice that the File Name is blank. In previous versions, this field would contain the current workbook file name
(i.e. “Blank Example.xls”)
Any help will be greatly appreciated.

Hi Jaynet,
In order to re-produce this, you need to answer "yes" to the rename file prompt and then continue with step 5 (above).
The reason for this is not an exercise in futility - I assure you. At my work and elsewhere, when web developers have created features to permit the end user to save web data in Excel format, often times the Excel files are saved locally in Excel's
html format (but with the .xls
extension).
(I actually prefer the .xls
extension, because it is easier to just double-click the file to open in Excel, rather than to select the open-with and then select Excel. a file with the .html extension will default open in your default browser. Now, I could change my default program
for the .html extension, but that would only solve a part of the problem and would not really address the bigger issue and that being that Microsoft changed a behavior in Excel and may not even be aware that it was a much used feature. )
To continue, when I go to open the resulting Excel file, I am prompted with the message that the file type does not match the extension (which is fine and not bothersome to me). It's at this point when I go to save the file that I get really annoyed.
In previous versions of Excel, the default file name would be pre-filled with the current name of the file and the default file type would state that it is a Web html file. I would just change the file type to Excel Workbook and hit enter to save.
I would be prompted with "Are you sure you want to overwrite your existing file?" message and I would click "yes" and that would be that.
However, in Excel 2010, because the default file name is blank, I then need to re-type the name into the field to save the file.
Any help is greatly appreciated.
Thanks

Nowhere to type file name in save as dialog, is this normal . . .

Hello;
here's the problem;
I'm having some problems with my main worksation and I'm going to probably rebuild it from scratch
(HDD problem & an AVG Baked registry & network stack)
so I've started by installing AA 2.0 (Full) onto one of my backup systems
& will follow with AA3.0 (Upgrade) if I can verify that the system can do the job for me
here's the problem;
I installed AA2.0 which is needed to get AA3.0(upgrade) to install
but I haven't activated or registered yet because I don't want to waste any activations
if I can't use the system
is it normal for the save as dialog to not have a place to type a file name when AA isn't activated?
System:
HP/Compaq DC7600
P4HT enabled 3.2GHz
2GB DDR2 533MHz RAM
Lots of HDD Space on 5 HDDs
sidebar:
why is my insertion point moved all over the page while I type this in firefox?

thanks for the reply:
don't know if this some sort of a display redraw issue:
but if I just hit enter I get the file saved as untitled.wav (which is floating in the middle of the screen not in the correct location)
and the file ends up in "My Music Folder" (which I never use, but can't change folders either)
-good grief I hate M$ for their My . . . crap folders
the system is using similar Intel-GMA integrated graphics as my main workstation
the only difference is processors and the chipset is one generation back
my main workstation has 965ry and the backup has 945g

Oracle SQL Developer error - "The file-based source procedure Name is not present in the database."

I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.

Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary

Is there a way to save an image file as a jpeg and add -web or -print to the file name?

I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.

Jason,
I helped somebody do a very similar thing about a week ago.
The trick is to use the Batch command's ability to construct a file name.
Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
Then rename "*-x.jpg" to "*-web.jpg".
See http://forums.adobe.com/thread/1038992?start=32
The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
I hope the disagreements in that thread don't cause too much disruption.
If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

Display a file name in th URL instead of the procedure name

Hi ,
I’ve created a Portlet that would show a word doc stored in a blob when a user clicks on a link. However only the procedure name that downloads the word document from the BLOB appears in the URL but not the actual file name. Is there a way to show the actual file name in the URL instead of the PL/SQL procedure name ??

Hi Samer_asn,
I am trying to do exactly what you did.
Can you tell me how you could retrieve the word doc from blob and show it in a portlet when a user clicks on a link
Thanks in advance
Jay

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

File name save procedure

Similar Messages

Maybe you are looking for