File name structure for picking up X12/EDIFACT documents from an FTP Server

According to some documents, and posts in this forum, the file name for a document retreived from an FTP server by B2B has to be in the following format: %TPName%_%X12 Doc Type%_%X12 Version_1_12345.dat
Why is this format required? Is it possible to obtain all this information for the Header Envelopes of each X12 or even EDIFACT EDI Document?

Thanks Ramesh.
I did specify the propery oracle.tip.adapter.b2b.edi.identifyFromTP=Group, but I was still not getting the expected results. Now I played around for a while and now I identified the problem . When I specify the property oracle.tip.adapter.b2b.edi.identifyFromTP=Group, I should use the Group ID when I create the agreement so that the agreement would be identified by using group id. I think I got that working now.
I have one question on the trading partner end point URL in FILE/FTP. When I specify the endpoint URL for a trading partner would that be used to pull the document from the trading partner or push the documents to trading partner?
In my testing even though I specified the end point URL for the trading partner using FILE protocol, when I put the message in that URL ( folder), it did not pull the message from that URL ( this trading partner is the initiator for that EDI 204 message). But when I put the messages into the host partner's end point URL, it got pulled and processed successfully. I am little confused on the usage of trading partner end point URL for the FILE/FTP protocols . Could you explain me little bit or point me to a documnet where it is expalined in detail?
Bala

Similar Messages

What file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

what file name is for the driver of gpib-usb-b?and how to add the driver file to vb in win2000??thanks

Hi,
Multiple files are required for the proer fnctioning of any of our GPIB products. Unfortunatly the installation is not as simple as copying a single file over. If you wish to make the installer silent, i believe this is entirely possible in a fashion similar to the details given at http://digital.ni.com/public.nsf/websearch/0730A66245E6808086256CA8006E2183?OpenDocument.
Hope this helps out!
Best Regards,
Aaron K.
Application Engineer
National Instruments

What is Loader File Name (FBL) for loading Languages to Employee?

What is Loader File Name (FBL) for loading Languages to Employees?

Hi, The best place to search for questions like this one is OTN, Oracle Technology Network. If you have any question about CLOUD and partnering with Oracle we will be more than glad to help! Thank you!

File transfer from a FTP server to another External FTP server

Hi,
I have one FTP server , I need to transfer a file from this FTP server to aother external FTP server. Could any one please help me how to write a batch file on FTP server so that my file is transfered to another FTP server by executing the Batch file. I don't want to use SAP server for this.
best regards
bobby

CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203

ALSB 3.0: Unable to retrieve files from Novell FTP Server

I have written several ALSB proxy services that retrieve data from Unix FTP servers. This works great and I haven't experienced any major issues. However, I now have to write a service that monitors a directory on a Novell FTP server. The same exact code works great pointed against a unix ftp server, but when pointed against the Novell FTP server, the proxy service never finds any files to process even though I have manually connected to that ftp server using the same id/password and have been able to see the files.
All the proxy is supposed to do is poll for files and copy them to the ALSB server for processing. Very very simplistic and works great against a Unix ftp server.
I turned on the transport debug option and this is all that shows:
<Ftp Client created and connected successfully for '+my_server+:21 for user:+myuserid+>
<+FileWorkPartitioningAgent.execute()>
<Returning 0 tasks.>
<-FileWorkPartitioningAgent.execute()>
We ran a packet trace on the server and we see the following commands being executed:
User myuserid
mypassword
SYST
TYPE i
PASV
list .
TYPE i
PASV
list .
quit
The files are in the "landing" directory for the user, so I am certain that it isn't a pathing issue. I'm just running out of ideas.
Some questions I have are:
1. has anyone experienced/resolved this issue before?
2. is there any way to do custom configuration of the ftp client (disable the PASV aka passive mode, enable debugging, etc) used by the FTP transport?
3. Could the FTP Transport not like the format of the list results from the Novell FTP server?
If anyone has any thoughts, I'd love to hear them.
Thanks!

Hi Iccarus
I realise its been quite a while since you wrote this thread but, in my desperation, I hoped you might have made some progress on this. I too am having almost identical issues:
1. Can get/put files via ALSB ftp from/to unix or microsoft ftp server
2. Can put files via ALSB ftp to the problem ftp server (not sure of its flavour atm)
3. Can get/put files from the command line from/to the problem ftp server
4. Cant get files via ALSB ftp from the problem server
The commands which were executed at the problem server are very similar to those you found:
successful login
ls
ls
quit
Any insights would be greatly appreciated

Imported source file name changed for the external table

Hi,
I have external table from flat file. Now the source file name is changed. I can change the file location to point to the new file name, but I can't update the source for the flat file property(as seen under flat file properties,structure tab. the column "Sampled From"). Is there way to have this update without having to import the file using the new file name again?

In the Files section in the object navigator find the flat file you want to change the source of.
Double click on the actual file, and on the General tab change the old file name to the new one.
The fact that it has been sampled from a different file should not 'disturb' the working of the external table.
However, if the structure of the new file is different I'd suggest to resample.
Good luck, Patrick

The file name format for Voice Memos has changed - how can I change it to the original format?

The file names for the voice memos changed in the last update. Now the day is first, which means when you sort them in a file folder, they sort by the number of the day and not year - month - day as before. Is there a way to change it back?

Restore it as new or sign out of that account and into yours. Both are covered in the manual.
http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

How can I remove the list of 20 recently saved items when you click on the arrow on the far right side of the File Name screen for images, web pages, ect?

When I right click and go save image/page/ect as the file save popup screen appears and on the right side of the File Name bar there is an arrow. If you click the arrow it shows the last 20? items that have been saved and their save location. Is there anyway to not have the list of recent items there or at the very least a way to clear them? I'm running Firefox 17 on Windows 7.
Also when you save items as you were typing in the name you want to save them as it used to show filenames with the same name as you type that are saved in that directory so instead of typing the whole filename or copy/pasting you could start typing a filename and then hit the up or down arrow, backspace and just change the end of the filename without having to retype the entire filename.
Hopefully you understand what I mean and can help me fix it, thanks.

It's in the proper directory. I can scroll down the window on the right and see the files but if I start typing the file name of one of them the autocomplete drop down thing that shows matching file names does not appear. In the back of my mind I'm starting to think a setting got changed and then the list of matching file names stopped appearing but I can't recall what setting may have been changed, if it was a firefox or microsoft change or for certain if anything got changed at all. Yeah I know I'm not helping my own cause but what can you do.

Where to find dtd file name/schema for a certain XML Gateway interface

Hi folks,
For a certain XML Gateway interface, in which DB table can I find the dtd file name and dtd schema that this interface use?
Now I can find its map name.
Thanks.

Hello!
I found the answer myself now.
The XLST files are part of the static web content of the MI project Visiprise.
In the SAP MII workbench go to the project Visiprise
Then under the tab Web the static contecnt can be found under the folder WEB/XSLT/..

Duplicate File Name error for Unicode file names

I am trying to rip my music collection from CDs to iTunes. I have decided to use my local language (Bangla/Bengali) as Track/Artist names using Unicode. I can edit the CD Info perfectly. The problem started when I try to import the tracks to iTunes as AAC/mp3. The first track is always imported ok but subsequent tracks fails to be imported. iTunes gave an error message saying the file name already exists where as it was not.
Please help.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Jar file name Required for IApplicationPropertiesService class file

Hi
I am using EP6 SP15, Please let me know the jar file name for IApplicationPropertiesService.class
Regards
Ganesan S

Hi,
you should have it in your NWDS plugins directory. I have it here:
<i>\Program Files\SAP\JDT\eclipse\plugins\com.sap.km.rfwizard\lib\bc.rf.global.service.appproperties_api.jar</i>
Romano
PS: you can try to find it yourself - not so hard: just search in the filesystem for XXXXXX.class including searching archives...

Extract the Files names Procedure for Linux????

hi,
i have installed ODI 11g on windows. & load the multiple file. as you can see this procedure (script) is used to get the files name. using technology "Operating System"
cmd /c dir D:\test\*.* /b /a:-d > D:\\Filesname.txt. it working fine on windows. Now i want to load these files names that are on Linux Server.
what will be the script for that
as my files directory name is Test>>>>containing the files
Filename.txt>> Extract the names of files in test directory.
In Linux.
Thanks,
Regards

Did you use the tool "OdiOSCommand" ?
In the first parameter, you write the LS command :
ls -1In the second parameter, you write the location of the target file, with the directory :
/home/your_user/test/Filename.txt With the 4eme parameter, you can decide to append the list in the existing file, or override the file.
In the 5eme parameter, you set the directory :
/home/your_user/test/If the directory is defined on your topology as a physical and a logical schema, you can use the logical schema in the parameters :
for instance :
<%=odiRef.getSchemaName("FILE_TEST", "D")%>/instead of "/home/your_user/test/"
where FILE_TEST is the name of the logical schema
Thanks to that, you will be able to use different directories depending on your contexts.

Is there a way to automatically set the file name in Acrobat Properties when exporting a PDF from Indesign?

When I used Quark to make a PDF, the title area in the PDF was automatically populated with the file name, there in the properties tab. We like use this area to confirm file names of original files, so we can keep track of drafts, (in case the file name of the PDF is changed, which our boss often does). Is there any way to set up InDesign to do the same?

@stadlock – I think I know what you mean…
You exported to PDF and changed the file name in the export dialog to a different one from the document name presented there the first time you exported that document. And in exports after that the new name will be presented in the dialog instead of the name of the document.
What you can do against that?
1. First time you want to export: Save before the document is exported. And do not save after it's exported with a new file name.
2. After the new file name is already there in the export dialog:
Type in the document name in the dialog. Export. Or abort after chosing a export preference. Save. Check again, if the document's file name is in the export dialog. If yes, procede like in suggestion #1. If not do a full export with the document's file name, save and then procede with suggestion #1.
Uwe

Help Fetching files from an FTP server into a DBase or local folder

Hello Gurus!
I need help to automate or design/write an app capable of (replace a manual process) reading log files in an ftp server folder, this log files are called CDR (Call Detail Record) and named as follow cdr.txt.20020221010000 meaning that this log file was created on 2002/02/21 at 01:00:00.
This CDR log files are generated every hour by a Lucent telephone switch using a software/program called EXS ExchangePlus in ASCII format (fixed length delaminated, Char data type). EXS ExchangePlus writes a record in this CDR/log files after the call is completed, i.e. Calling_Number, Called_Number, Date_connect (yyyymmdd), Time_connect (hhmmss), Charged_time (hhmmss, duration of the call), and so on.
The manual process I am using now is:
1. Log in the ftp server into the folder where the CDRs log files are, located the latest generated CDRs log files and downloaded them into a local folder/directory. Normally I download the CDR for full day or 24 CDRs log files.
1a. Optionally sometimes I used a program called VEdit compiled/gather all 24 CDRs into a single file.
2. Once I have downloaded the CDRs I want to process (normally I process a full day 24 CDRs) I imported then into a Data Base temp table, where then I do the conversion of data types (i.e. Dates and times fields from char type -> to ->Date type) and calculations for billing purposes.
So if somebody can help with this, I would really appreciated ideas or any kind of information on how to automated this process.
I�m familiar with Java2 platform (using JDeveloper ) so if somebody has done something like this before using java, this would very helpful. Or Maybe using Visual Basic 6.0 would help too.
Thanks Gurus, and I look forward to hear from you soon!
Alf Pathros!

Thanks for the idea, even though an example would help me more.
I already found the FTPClient class.
I also would like to knwo if there is a away Ican append/merged various files CDRs into a single/one to then dump/import it into the database

Getting the file from IIS FTP Server using ALSB

Hi,
I want to extract a file from FTP server in ALSB.I am using ALSB2.5 and Microsoft IIS FTP Server.
Now i want to know that
1.Do i need to configure a Proxy service or Business Service to poll a file from FTP server?
2.How to read the contents of the file once the File comes in?
Regards,
Indu Garg

You need to configure a Proxy service for the polling.
The contents of the file will be inside the context variable $body.

File name structure for picking up X12/EDIFACT documents from an FTP Server

Similar Messages

Maybe you are looking for