File name with symbols won't delete from trash.cache\trash\cache folder.
found this weird file name with symbols (squares nad the like) in the trash.cache\trash\cache folder. Can't seem to delete it from windows, can't get at from the dos prompt. Windows safe mode won't delete it.
Any suggestions as to what it is and how to get rid of it.
At present am trying reinstall of firefox and virus scan.
Thanks
Peter
I tried to do the instructions Adobe gave me but when
I put in the disc that came with my mac and hold down
C when it restarts it takes me to the screen to do a
fresh install.
At that point go to the Menu & select Disk Utility - I can't remember exactly which menu but you should be able to find it easily... there isn't too much there
I went into the disk utility through the Apps folder
and for somereason the option to repair isnt
highlighted and it wont let me click it. I tried to
repair permissions/verify but it doesnt change
anything. I looked at the info and it says the volume
can be repaired, but it wont let me.
You can't Repair the disk the system is currently running the OS from - That's why you have to boot from the Installer disk (or some other start-up disk). Repair Disk addresses directory structure issues - totally separate from what Repair Permissions does.
HTH|:>)
Bob J.
Similar Messages
-
Set file name with XSLT - receiver channel - elements from XML?
Dear experts,
I have an XSLT mapping for a message that is sent via a receiver channel to a customer.
The customer wants a certain file name which is put toghether by elements from the XML message.
I have looked at:
Re: Java Map for writing the file
The java code and the XSLT work perfectly!
In the line
fos = new FileOutputStream(new File("Fixed_" + new Date().getTime() + ".xml"));
a fixed value, date and time are used for the file name.
But I need some values from the XML message to create my name. But how do I do that? Can I somehow get values from the XML message through that java function or do I have to adapt the XSLT?
Can someone please help me!
Thank you,
PeterHi Udo, Hello experts,
Now I do have a problem. I am using this XSL file:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">
<!-- change dynamic configuration -->
<xsl:variable name="dynamic-conf"
select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key"
select="key:create('http://sap.com/xi/XI/System/File', 'FileName')" />
<xsl:variable name="dummy"
select="dyn:put($dynamic-conf, $dynamic-key, 'TOOLDATA_.xml')" />
<xsl:copy-of select="." />
</xsl:template>
</xsl:stylesheet>
But then the output file is only named "TOOLDATA_.xml". So I assume the XSL is working.
And I am using this Java-file:
package pi_mappings;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.*;
public class SetFileName extends AbstractTransformation
static final int BUFFER = 1024*1000;
private Map param;
public SetFileName(){ }
public void setParameter (Map map)
param = map;
if (param == null)
param = new HashMap();
public static void main(String args[])
try
InputStream in = new FileInputStream(args[0]);
OutputStream out = new FileOutputStream(args[1]);
SetFileName sfn = new SetFileName();
//sfn.setParameter(mapOfMap);
sfn.execute(in, out);
catch (Exception e)
e.printStackTrace();
public void execute(InputStream inputstream, OutputStream outputstream)
throws StreamTransformationException {
try
DynamicConfiguration conf = (DynamicConfiguration) param.get("DynamicConfiguration");
DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
int len = 0;
byte buf[] = new byte[BUFFER];
FileOutputStream fos = null;
if (conf != null)
fos = new FileOutputStream(new File(conf.get(KEY_FILENAME) + new Date().getTime()) ); //sample only
else
fos = new FileOutputStream(new File("Fixed_" + new Date().getTime() + ".xml"));
while ((len = inputstream.read(buf)) > 0)
outputstream.write(buf, 0, len);
fos.write(buf, 0, len);
fos.close();
catch(Exception e){ e.printStackTrace();}
public void transform(TransformationInput arg0, TransformationOutput arg1)
throws StreamTransformationException {
getTrace().addInfo("JAVA Mapping Called");
this.execute(arg0.getInputPayload().getInputStream(), arg1
.getOutputPayload().getOutputStream());
Could you please help me find the mistake. I tried to test it locally by changing the main-method but I could not get it to work.
Thank you very much for any ideas!
Best regards,
Peter -
I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help
I experienced this issue as well.
Background:
I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
Solution (summary):
Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
Solution (detailed steps):
Create a new calendar
On your phone, open the calendar app
Tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Scroll to the bottom of the list and tap the "Add Calendar..." option
Give your new calendar a good name, such as "Delete me"
Tap "Done" in the top right corner to save the new calendar
Tap "Done" in the top left corner to finish editing the list of calendars
Tap "Done" to exit the list of calendars
Assign all calendar entries that you wish to delete to the calendar you created in step 1
Tap a calendar entry that you wish to delete
Tap the "Edit" button in the top right corner
Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
Tap "Done" in the top right corner to exit the Edit Calendars screen
Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
Rejoice, your pesky repeating calendar events have been deleted
At this point all of the items that you assigned to the deleted calendar should be gone
Repeat the steps above for any entries that you missed
Post another message to this thread if this did not resolve your problem
minor edit for clarity made by ScottHooley -
FILE NAME WITH FILE EXTENTIONS
HI EXPERTS!!
I WANT TO GET THE FULL FILE NAME STRORED IN THE SERVER FOLDER. I USED FM RZL_READ_DIR_LOCAL BUT I AM GETTING ONLY 32 DIGITS OF NAME NOT FULL NAME AND ALSO SIZE PARAMETER IS CONCATENATING WITH NAME.
I WANT THE FILE NAME WITH FILE EXTENTIONS(TXT. .PDF ETC)..
PLZ SUGGEST ME HOW TO GET THE SAME..
PLZ REPLYE ME..
MAHESHHi Mahesh,
Try the below FM in the below code.
DATA:
LV_PERMISSION(10), " Permission
LV_H2, " H2
LV_FLNM(13), " File name
LV_USER(10), " User
LV_GROUP(10), " Group
LV_SIZE(15), " Size
LV_MONTH(3), " Month
LV_DAY_C(2), " Day
LV_YEAR(5), " Year
LV_FILE_NAME TYPE FILE_NAME, " Filename
LV_JUNK, " Junk
RETURN_CODE TYPE I. " Return code
DATA:
CMD_PARAMS LIKE SXPGCOLIST-PARAMETERS,
" External prg.parameters
CMD_OUTPUT TYPE BTCXPM OCCURS 0, " Log message
STATUS TYPE EXTCMDEXEX-STATUS. " Status
CONSTANTS:
LC_DIR TYPE C VALUE 'd'. " Directory
FIELD-SYMBOLS: <CMD_OUTPUT_LINE> LIKE LINE OF CMD_OUTPUT.
CMD_PARAMS = PV_DIRECTORY.
CLEAR CMD_OUTPUT.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
EXPORTING
COMMANDNAME = 'Y_LS_LN'
ADDITIONAL_PARAMETERS = CMD_PARAMS
IMPORTING
STATUS = STATUS
EXITCODE = RETURN_CODE
TABLES
EXEC_PROTOCOL = CMD_OUTPUT
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
Check Status first then check sy-subrc
CASE SY-SUBRC.
WHEN 0.
CASE STATUS.
WHEN 'F'.
MESSAGE I057(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'E'.
MESSAGE I058(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'S'.
MESSAGE I059(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 'C'.
MESSAGE I061(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
ENDCASE. " CASE STATUS.
WHEN 1.
MESSAGE I048(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 2.
MESSAGE I049(YS) WITH 'Y_LS_LN'(003).
GF_EXIT = GC_TRUE.
WHEN 3.
MESSAGE I050(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 9.
MESSAGE I054(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN 10.
MESSAGE I055(YS) WITH 'SXPG_CALL_SYSTEM'.
GF_EXIT = GC_TRUE.
WHEN 11.
MESSAGE I056(YS) WITH 'SXPG_CALL_SYSTEM'(002).
GF_EXIT = GC_TRUE.
WHEN OTHERS.
MESSAGE I022(YS) WITH SY-SUBRC.
GF_EXIT = GC_TRUE.
ENDCASE. " CASE SY-SUBRC.
IF GF_EXIT = ' '.
READ TABLE CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE> INDEX 1.
IF SY-SUBRC = 0.
CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
IF <CMD_OUTPUT_LINE>-MESSAGE CS 'total' OR
<CMD_OUTPUT_LINE>-MESSAGE CS 'TOTAL'.
DELETE CMD_OUTPUT INDEX 1.
ENDIF.
ENDIF.
LOOP AT CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE>.
CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
SPLIT <CMD_OUTPUT_LINE>-MESSAGE AT SPACE INTO
LV_PERMISSION
LV_H2
LV_USER
LV_GROUP
LV_SIZE
LV_MONTH
LV_DAY_C
LV_YEAR
LV_FILE_NAME
LV_JUNK.
IF LV_PERMISSION(1) = LC_DIR.
CONTINUE.
ELSE.
LV_FLNM = LV_FILE_NAME(13).
TRANSLATE LV_FLNM TO UPPER CASE.
IF LV_FLNM = '1W_FIARFUNNEL'.
PT_FILE-FILE_NAME = LV_FILE_NAME.
APPEND PT_FILE.
ENDIF. " IF LV_FLNM = '1D_FIARFUNNEL'.
ENDIF. " IF lv_permission(1) = ...
ENDLOOP. " LOOP AT CMD_OUTPUT
ENDIF. " IF GF_EXIT = ' '. -
File name with Dateand time stamp.
Hi All,
I want to generate a file with a date and time stamp.
For that in File Receiver adaptor i am using option "Add Time Stamp" in File Construction mode. however it is generationg file name as: FileName_20082104_121211_645.txt . In this I don't know what these last three characters "_645" are? And In the File name i only want a file name with datetime stamp . I don't require underscore in between. for eg: FileName_20082104121211.txt (FileName_dateTime.txt)
Can anybody suggest me the way to achive this?
Thanks,
Atul@FileName_20082104_121211_645
The date time stamp in XI's file adapter will be in that format. This is to avoid over writing of files created simultaneously at the same time. So the last 3 digits is a form of an unique id to distinguish between the same.
In case you want the format as FileName_20082104_121211, use the dynamic configuration and create the file name inside the mapping itself and pass it across.
To get an idea about the same, ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - an usage of the same.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm -
Encoding failed in "file name" with error: -43
Hi!
I've tried everything but still, after about 20 hours of encoding DVD Studio Pro just stoppes, saying "encoding failed in "file name" with error: -43". The movie is in DV PAL format and made in Final Cut Pro version 5. I'm using DVD Studio Pro 4.0. The movie is about 1 hour and 30 minutes long and I'm trying to put it on a double layer DVD. I've tried to shorten it (it was nearly 2 hours before), but that didn't help. I also tried to shorten it even more and put it on a single layer DVD, but still the same message.
So if somebody has any idea of how I can solve this problem, please let me know as soon as possible!
Thank you!Error -43 means "File not found." If you are compressing from a reference movie, make sure that all referenced movie clips are present on the disk and that permission settings are not preventing DVD Studio Pro from accessing them.
Error -1309 means "Out of bounds." This means that the source file is pretending to be bigger than it actually is.
So it sounds like there are issues with your source movie.
P.S. Compressor has a much better MPEG-2 encoder and I would recommend using that instead. -
Shared photo-stream, makes long file names with 42 random characters
Windows icloud 3.1, in a shared photo-stream, makes file names with 42 random characters long. It didn't do this in iCloud 2. I have installed iCloud 3.1 on a windows 8.0 and 8.1 machine and two Windows 7 machines. They all do the same thing. It used to give me file names like "IMG_0001.jpg" now it gives me random file names like "01a9fc3363330464233a142486180f0c1622eb9fca.jpg" all the pictures are out order.
Does anyone have fix for this? Does any one else have this problem? I have posted this before and know one else that uses windows seams to have this problem exect me. I did call Apple and they did some research and bumped me up to senior techs and eventuality Apple told me this is working the way it was designed to. This is extremely stupid, I need the sequential file names so the pictures will sort correctly.I have never found a solution for this.
I did find a Work Around. What I do when I receive a folder full of pictures from another ios iPhone user, I copy all the photos as a batch from the PhotoStream folder into a free Windows program called "FastStone Photo Resizer" from www.FastStone.org. This program allows you to resize the photos as a batch to what ever size you wish. In my case I resize them to 2560 x 1440 which fills my 27" monitor and reduces the file size of each picture from 2MB or 3MB down to about 450 KB without degrading the picture as far as what you see on the screen.
This program will also within the same batch operation, allow you to sort the pictures by "Date Taken" which is the Date and Time the picture was taken. It gets this information from the EXIF data in the jpg file. This program will then rename the files with different numbering format options including date, time, alphanumberic and with just simple numbers starting at what ever number you wish to start with. I can get files that look like this again "IMG_0001.jpg" and have all the pictures in the correct order that they were taken. At this point, I save the pictures directly to a folder on my PC. The cool thing about this is, all the EXIF data is preserved as well. I can process a 100 pictures in less that 60 seconds. I hope this helps. For me, I can now live with this iCloud numbering defect. -
Camparing file name with a value of the field in the source
Hi All,
I have a file sender. I need to compare the file name with the value of a field in the source and then map to the target.
For example:
<Record>
<Date>20071103></Date>
<name>abcd</name>
</Record>
the name of the file would be 20071103. i need to check this file name with value in 'date' field , if its true then we need to map it to target
please suggest some way to meet the reqirement
thanks
jhansiHi,
Here is the reason i need to do this:
The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter, so that the system would not recognize requests as "overlaping requests".
So, where is the information about shown in the field Selection Options is stored? In which tables?
Thanks
Tigr_Z -
Generating file name with date
Hello,
I try to create via ABAP a file name with date in it. Normaly my script must run but the script won't run. Please help. Thanks.
data = sy-datum. " = data set to sys date
data+6(2) = '01'. " = first day of month
data = data - 1. " = last day of last month
file name creation
p_filename+0(21) = '/sapio/flatfiles/xxx/'. " = first part of file name
p_filename21(6) = data0(6). " = second part of file name
p_filename+27(15) = '_XXXX_XXXXX.csv'. " = last part of file name
p_subrc = 0.
Regards, ThomasHi again!
Now I try it with your hints but now I got a save error.
program conversion_routine.
* Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
* Global code used by conversion rules
*$*$ begin of global - insert your declaration only below this line *-*
* TABLES: ...
* DATA: ...
data: data like sy-datum.
*$*$ end of global - insert your declaration only before this line *-*
form compute_flat_file_filename
using p_infopackage type rslogdpid
changing p_filename like rsldpsel-filename
p_subrc like sy-subrc.
* Insert source code to current selection field
*$*$ begin of routine - insert your code only below this line *-*
* Datum wird gebaut
data = sy-datum. " = data set to actual date
data+6(2) = '01'. " = first day of month
data = data - 1. " = last day of month before
v_date = data+0(6).
* Dateiname wird gebaut
p_filename = '/sapio/flatfiles/XXX/'v_date'_XXXX_XXXX.csv'.
p_subrc = 0.
*$*$ end of routine - insert your code only before this line *-*
endform. -
CC Illustrator files (v17.0.0) won't reopen from the desktop. How can this be fixed?
Hmmm, the problem appears to have disappeared once I deinstalled Dreamweaver CS6. Coincidence?
Also our IT department sent me this, but no need for it at the moment:
Deleting the preference folder (in osx it's in "user/library/Preferences/Adobe Illustrator 17 Settings").
Illustrator will then create new preferences.''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote> -
Change file name with oreilly servlet
I am using oreilly servlet package and I want to change the file name to the file I am uploading, is this possible ?
How ?
Thanks.
here I post the servlet code:
package com.reducativa.sitio.servlets;
* DemoParserUploadServlet.java
* Example servlet to handle file uploads using MultipartParser for
* decoding the incoming multipart/form-data stream
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import com.oreilly.servlet.multipart.*;
public class DemoParserUploadServlet extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
PrintWriter out = response.getWriter();
response.setContentType("text/plain");
out.println("Demo Parser Upload Servlet");
File dir = new File("f:/");
if (! dir.isDirectory()) {
throw new ServletException("Supplied uploadDir " + "f:/ " +
" is invalid");
try {
MultipartParser mp = new MultipartParser(request, 10*1024*1024); // 10MB
Part part;
while ((part = mp.readNextPart()) != null) {
String name = part.getName();
if (part.isParam()) {
// it's a parameter part
ParamPart paramPart = (ParamPart) part;
String value = paramPart.getStringValue();
out.println("param; name=" + name + ", value=" + value);
else if (part.isFile()) {
// it's a file part
FilePart filePart = (FilePart) part;
String fileName = filePart.getFileName();
if (fileName != null) {
// the part actually contained a file
long size = filePart.writeTo(dir);
out.println("file; name=" + name + "; filename=" + fileName +
", filePath=" + filePart.getFilePath() +
", content type=" + filePart.getContentType() +
", size=" + size);
else {
// the field did not contain a file
out.println("file; name=" + name + "; EMPTY");
out.flush();
catch (IOException lEx) {
this.getServletContext().log("error reading or saving file");
}Hi there,
I am facing the same problem that you have stated in your Feb 26, 2002 10:28 AM message regarding "change file name with oreilly servlet", I would like to change the file name to include a unique identifier upon upload, did you ever find a solution to your problem?
Thanks!
Todd
[email protected] -
I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20 - how can I change this?
Click on the below link :
https://get.adobe.com/flashplayer/otherversions/
Step 1: select Mac OS X 10.6-`0.`0
Step 2 : Safari and FIrefox
Then click on " Download Now" button. -
MimeBodyPart.getFileName() returns file name with directory path.
Hi
The documentation says getFileName() returns filename ,not including directory components. But it is returning
path like Eserv generic/mails/a.html. Can it return a full path in some mail servers?
Please respond.
ThanksThe documentation says getFileName() returns filename ,not including directory components.I think you must be misinterpreting the documentation. Where did you read that?
The getFileName method returns whatever the sender sent as a file name. The send should
send only a simple file name, with no directory components, but they can send anything, and
you should protect against abuse before using such a file name. -
Using the regex to match the file name with date time
Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it. However in the current application i need to parse the file name and get the current date time to check if it is matched. Does anyone have good idea?
{code}
testfile10-08-09-2008-08-21-04-24-0443.zip
testfile11-08-09-2008-08-22-04-24-0441.zip
{code}
thanks in advanced!lauehuang wrote:
Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it.That regex doesn't make a lot of sense:
- with "\\\\w" you probably meant "\\w";
- "\\w+|.+" doesn't make sense: you can simply do ".+" in that case;
- ".(zip)" will also match the string "%zip" or "Ezip".
However in the current application i need to parse the file name and get the current date time to check if it is matched. I don't know what you mean by that. -
when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?
Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''
Maybe you are looking for
-
Can no longer enlarge or shrink the screen.
-
Trim QuickTime movie in space, not time?
I know that the QuickTime X player can trim a movie in the time dimension, but is there any way to trim in the space dimension? For instance, if you do a screen recording, you may not really want the whole screen, just one window.
-
TS1702 Asking for security question to be answered that I don't know the answer to.
Itunes is asking fo security questions to be answered that I don't seem to know the answers to. Need help fixing this problem.
-
SQL Developer Data Modeler: Can you adjust the layout of FK relationships?
First day using the tool and I can't seem to figure how to do this or if it is even possible. I've looked in model properties and constraint properties. The only way I can get them to move is by moving the associated tables. I really just want to cle
-
Hyperion Financial Reporting Studio Functions Ussage Very Urgent....
Hi All, I have to get all the Accounts data from the Balance Sheet but not the subtotal information. If I select the Descendant function I am getting the subtotals of Current Assets and Current Liabilities. but I dont want that ... I want only the bo