File named "client node" appears on desktop
I was have some problems earlier with a very, very slow MacBookPro which wouldn't shut down. Every program interrupted Log Out. When I finally restarted, a file named "client node" appeared on my Desktop. It's a quite large file (1.23G). I tried to trash it, but Trash won't accept it. Is it important, can it be thrown out?
razzman wrote:
I was have some problems earlier with a very, very slow MacBookPro which wouldn't shut down. Every program interrupted Log Out. When I finally restarted, a file named "client node" appeared on my Desktop. It's a quite large file (1.23G). I tried to trash it, but Trash won't accept it. Is it important, can it be thrown out?
If you still have that file you might find useful advice in this older discussion thread:
http://discussions.apple.com/thread.jspa?threadID=2137621&tstart=-1
Similar Messages
-
After updating to Mac OS X 10.6 a new file "client node" appeared on my desktop. This file cannot be moved or delete. Does anybody know what this file is?
Thanks in advance !!!Yep, same here. Had one. Went away on a restart. Today, on power up, two "client node" files on the desktop. Argh!
-
IMac HD icon became "client node" then disappeared
I noticed a few days ago that the iMac HD icon renamed itself “client node” on my desktop then the icon disappeared completely after restarting. I was able to put an iMac HD alias on my desktop so I can access my HD files, but now Time Machine is not backing anything up. It goes through the backup process every hour as set, but there is nothing being backed up on Time Machine since the iMac HD disappeared from my desktop.
What is this “client node” thing (what happened???) and where is my HD icon?
So far I’ve run Cocktail, repaired permissions, relaunched the Finder, restarted my iMac, shut my iMac down overnight and booted it up in the morning. Still missing the HD icon (and HD files).
When I click on the HD icon in the sidebar, the HD alias shows a grayed-out HD icon in the list of HDs (my iDisk, iMac HD alias, Network, & Time Machine). I can access the HD files through the HD alias, but where did the actual HD icon go, and how do I get it back?I think what may have happened is that your HD somehow acquired a "hidden" flag, making it invisible to Finder. I have seen a "client node" icon appear on the Desktop transiently when I have deliberately made a disk volume invisible using a Terminal command. The "client node" icon disappeared if I then relaunched the Finder. I'm not sure what it represents - it may just be a transient Finder "ghost" of an object which has just become "hidden".
To restore visibility to your startup disk, I would try the following:
Launch the Terminal - it is /Applications/Utilities. Next copy-paste the following line into the Terminal window, followed by typing <Return> :
sudo chflags nohidden /
Enter your admin password at the prompt (it will not echo on the screen) and again type <Return>.
Do you now see the HD icon? -
Excel file named 114d8000 appeared on my desktop and I can't move or delete it. What is it?
Excel file named 114d8000 appeared on my desktop and I can't move or delete it. What is it?
At the top of the iPad on the right. Here is a link to a diagram with the various buttons marked:
http://comp.uark.edu/~ssstalli/Instructional%20Website/ipad%20diagram.jpg
Cheers,
GB -
I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.
-
Files that i save to my desktop do not appear on my desktop
I am trying to save files to my desktop. The files appear under desktop in finder but not on my desktop. Can you please advise
Did you save your bookmarks in the bookmarks bar? Check there.
-
Files appears on desktop with delay.
Hello! All my files that I save to the desktop and screenshots appears on it with delay. It takes more than 10 minutes for them to appear. But if I copy/paste an existing file on desktop or empty the trash can the screenshots appears immediately.
I have a lots of free RAM, no app running, and I have any idea1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My new 27" iMac has two icons that appeared on my desktop and I have no idea where they've come from. Both are labeled "Client node", neither have any info associated with them, and both are un-deleteable. One is a file and the other appears to be a drive of some sort. Any ideas?
If you restart, or just log out and log back in, do they still appear? There was another thread mentioning the same "client node" thing. The poster said it went away after a restart or logout (something that restarts Finder so you could also try a Force Quit of Finder).
-
I have been using Firefox on my Desktop PC with Windows XP for a long time. However, today possibly due to some virus (I attached an infected flash drive to my PC) a suspicious change in homepage (www.delta-homes.com) of my firefox occurred. Simultaneously an error message of "WinZip" appeared on screen. I figured that there must be some software in "C:\Program Files\" which is also causing problem to my firefox. I opened Program Files and removed that folder named WinZip. (Tried to uninstall it but it won't happen so I had to use "Unlocker" to kill processes this folder was associated with and then deleted the folder.)
From that point onward, My FireFox started to behave weird. Whenever I click on Firefox icon or access firefox.exe from any source (start menu, quick launch, program files, Run Command), it starts but appears only in "Task Manager Processes Tab". In that Processes Tab, firefox.exe is continuously using 50% of CPU but it does not appear on Desktop at all.
To go a step further, I uninstalled firefox and tried to re-download from Firefox official website but the download fails in the start saying "Download is interrupted". (See attached Image). So I downloaded a previous version of Firefox (v 34.0) from www.filehippo.com and installed it but the same problem is happening with this version too.
I am confused and surprised what might be causing this problem. Everything else on PC running fine. Kindly help me restore my Firefox so that I may not lose any precious Bookmarks, Settings and other Data. thanksStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Aperture's file naming. Am I doing something wrong?
I hate Aperture's file naming with every ounce of my being. It is so frustrating and this simple item kills my workflow. I am hoping it's me and I'm doing it wrong. Any suggestions would be appreciated.
1. I import the originals. File name is _dsc.0450.nef
2. On import, I change the name to lapresle200909260450 and sort by image date.
3. I edit.
4. I move images around and group them visually by subject: the details, the groomsmen, etc...
5. I rename the files sequentially. So file #450 might now be #575. The new name might be iconex090926prf0575 and sort by version name.
The proofs go up and the client orders #575. I open the image in A2, edit with Photoshop and save. I go back to A2 and the stack now has two images, iconex090926prf0575 and lapresle200909260450. I export the client's retouched image to a folder on my desktop. My file naming presets are "version name_custom name" with the custom names being 4x6, 5x7, 8x10. When I'm ordering from my lab, each image has the print size in the name so I can keep big orders straight.
After each image that gets an external edit, I have to go into the folder on my desktop and rename the file. Is there any way to have A2 export the image with the name that is visible? Going back in and highlighting and renaming every file to match the proof is so time consuming.
Any help or suggestions would be appreciated.
Cheers-KevinI import files as they are, no renaming. Then when I'm completely finished editing and organizing them within folders/projects/albums, + any additional editing in PS or other external editors, I relocate masters to my desk top and rename them then. A few seconds later I consolidate those same files back into the Aperture library and there they sit with new "file names." This method works for me but it helps to have tons of free space on the desktop and 16 cores rockin.
Now why can't aperture export "file names" not version names but files names makes absolutely no sense! There is no preset for this and that needs to be fixed. I export custom name and index using the same exact name as the file name to put the images online or where ever. As long as nothing was moved or deleted this method sends images out matching the file names. You need to make sure that all your editing is done before you relocate and consolidate masters. My invoice from Paypal matches the files in my library. Perfect work flow if you never mess up the rough edit, if no body ever wants additional changes-lol, it's really a linear process, and is very limited*
Editing images in apertures external editor or aperture dodge and burn is just stupid because they both create a additional tiff file in an attempt to force nondestructive editing. Where is the switch to turn this off! Please, we're professionals, lets' go manual.
No switch, so I don't use it. It's a failed system like most other "round trip editing" attempts from apple like fcp, soundtrack, and others. I've used them all for years and they only work about half the time, removed from my work flow, end of story.
Instead, prior to relocating and consolidating, I just export out the raw file as a 16 bit tiff and reimport it into aperture when editing is done in PS. Again, my computer does this in under a second, so it works for me.
*Okay, rwboyer, has a very good approach to the problem. Do it the programs way instead of our way. Renaming the masters on import and only adding extensions later is really the way to go. All your searches will always hit the master name so all the extra stuff after the master name can personalize your client without ever changing the master name. He is also right regarding the use of metadata, it's really the reason why I'll forever be a aperture guy.
Having said all that, I still think my way could be the fastest for all kinds of reasons with just two fixes.
Add preset to export file names
toggle switch, for editing raw files in Photoshop raw instead of creating new tiff files.
Rwboyer, makes perfect sense, great approach.
Message was edited by: Solved -
How to add folder/project name to a File Naming preset
Here's a tip to automatically add the name of the Project or its parent Folder to the filename during Import or Batch Change.
I always used a custom field for adding my client's name to the filename upon Import or Batch Changing versions or masters. But often I would forget to change the custom name, and since it's auto-populated with the previous entry, I'd end up with a bunch of files with the wrong client's name on them. That looks kind of bad. So once I saw with Aperture 3 you can add the Project name or Folder name when relocating referenced files to the new folder structure, I was excited to be able to do the same for the filenames at import. Well, no such luck. They're not an option when you create a custom File Naming preset.
However, I recently decided to poke around inside some plist files, and found a workaround. I discovered the format string for Folder Name is %F and Project Name is %P. The trick is getting the code into the Format Field where you create the preset.
Create a new File Naming preset by choosing "edit" from the Version Name menu during Import or Batch Change. Drag everything you want in the name into the Format field, and enter %F or %P where you want the Folder or Project name. The tricky part is that you can't insert it between two existing criteria. It only works at the very end. After you have it in place, you can drag the criteria around to get it in the order you want.
The alternative method is to insert the code directly into the plist. PLEASE, always make sure you're working with a copy and have a good backup when you're poking around in such things. If you have trouble getting the code to take from within Aperture, you can try this. Same as above, create a new preset, but this time, enter an F or P where you want the Folder or Project name. Give it a unique preset name and save it. Then Quit Aperture. Navigate to ~/Library/Application Support/Aperture/FileNamingPresets.plist, and make a copy of the file, then open with Property List Editor. Dropdown the plist and then dropdown the item you want to edit. You should recognize it by the preset name. Now the easy part. Click in the FormatString field and insert the % character before the F or P you entered in the Format field. Save and you're done.
I discovered later that while the Folder and Project name works just fine during import, for some reason only the Project name works during Batch Change. The Folder name simply creates a "-" in the filename.
In case this is seen as a hack and gets deleted, I'm also submitting it to http://www.macosxhints.com/ and I suspect if anyone from MacCreate sees it, they'll steal it too, as they're known to do.I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:
-
Items not appearing on desktop
I am having problems with items not showing up on the desktop.
The main problem I am having is that I have a Moto Q Cell phone, which I use Missing Sync software with. It was mounting on the desktop and then stopped. Everything else works with it on my Mac. To make a long story short, I have written the company, they have looked at the logs and everything appears fine. So I am at a loss.
Then I started thinking about how I will download a program or file to the desktop and it does not appear. However, if I do a search, it shows it is there. The only way it will appear is for me, is to search for the file, then drag it onto the desktop from the search results.
So, my thought is it isn't the phone or the software, but a bug in the OS. Thinking back to pre OS X days, I used to rebuild the desktop. Is this still something that is available in OS X? It has been so long since I had to do that, I have forgotten how.
Any other ideas on what I might do to make sure things are appearing correctly on the desktop?
Thanks in advance.
RandyAdrian Clarke1 wrote:
Hi Randy, This sounds like two separate issues. For the cell phone to mount check in Finder preferences under the General Tab and select the items that you want to appear. Presumably the cell phone would be seen as a disk(?)
It should be seen as a disk, you are correct. However all three items are checked in the Finder preferences. I already checked that.
For downloaded files, that is a browser specific thing. If using Safari, open Safari Preferences, select the General Tab and against "Save Downloaded Files to..." choose Desktop. For other browsers there will be a similar setting in its Preferences.
Good luck,
Adrian
That isn't the problem. They ARE already set download to the desktop and are doing so. They are just not always appearing on the desktop as they should when downloaded. In other words. I should see them there after I have downloaded. But as I stated in my earlier post, the only way I can make them visible on my desktop is by searching for them, and dragging the found file (which IS LISTED as being on the desktop) onto my desktop again and then it appears.
Good try, but neither of these were solutions.
Message was edited by: Randy Traylor
Message was edited by: RT -
Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext: VNC extension running!
vncext: Listening for VNC connections on port 5901
vncext: Listening for HTTP connections on port 5801
vncext: created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul MuqeetHi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK -
How do I install a file named "firefox_plugin_2.1.1.0720.fzip" ?
Hi,
I am trying to install a firefox extension from Foxit software (PDF reader) but firefox always comes back and says it is unable to start anti-virus program
Then when I get past that the file: how do I install a file named "firefox_plugin_2.1.1.0720.fzip" will not unzip or load into firefox. How do I get the program/extension to load?
Thank you
Jsteff
[email protected]Hi and thanks for getting back to me.
Normally I am able to do most things with Windows and most programs..
However, I am not able to open the file with Firefox as it wants me to tell it which program to use.
I have the file on my desktop, but Notepad will not open it.
Firefox also asks me which program to use when Firefox is asking me "what should firefox do with this file?" That happens after I have gone to Firefox/File/Open file and it gives me the question of what do you want Firefos to do with this file.
The only choices are to open it or save it.
My problem is I do not know which program to select to open it.
So which program should I use?
Very sorry and thank you again.
Jsteff
[email protected] -
Drive Enclosure hard drive won't appear on desktop
I just recently bought the Tekserve Aluminum FireWirk 400 Drive Enclosure.
I had an internal hard drive on my G3 that I tock out and installed into the
enclosure. The hard drive seems to start up and the blue enclosure light is on but the drive dose not appear on my desk top of my Mac mini.
Machine Name:Mac mini
Machine Model:PowerMac10,2
CPU Type:PowerPC G4 (1.5)
I tried disk utility and got the following.
Disk Utility
74.5 GB macpower
Disk Description :Macpower
Total Capacity :74.5 GB (80,026,361,856 Bytes)
Connection Bus :FireWire
Write Status : Read/Write
Connection Type :External
S.M.A.R.T. Status :Not Supported
Connection ID :512384776805421
I TRIED RUNNING A DISK REPAIR.
BELOW IS THE LOG REPORT
Mac OS X Version 10.4.6 (Build 8I127)
2006-07-17 14:02:47 -0400
2006-07-17 14:02:48.378 SystemUIServer[76] lang is:en
Jul 17 14:04:53 michael-coynes-mac-mini diskarbitrationd[35]: unable to repair /dev/disk1s6 (status code 0x00000008).
Disk Utility started.
Verify and Repair disk “X”
Invalid Volume Header
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
Rebuilding Catalog B-tree.
The volume X could not be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped repairing “X” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Verify permissions for “Macintosh HD”
Determining correct file permissions.
parent directory ./Users/Shared/SC Info does not exist
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Mount of “X” succeeded
Mount of “X” succeeded
Verify and Repair disk “X”
Invalid Volume Header
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
Rebuilding Catalog B-tree.
The volume X could not be repaired.
Error: The underlying task reported failure on exit
Any suggestions?
Thanks
-MikeHey Mike,
If you need the data off the drive then you'll have to purchase another disk utility program like Disk Warrior.
If you don't need the data then I suggest you just partition it and start fresh. I have "fixed" a few drives by just partitioning them. Please note: you will loose everything on the drive!
Greg
Maybe you are looking for
-
Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restor
-
How to trace whether member of an attribute is selected or not in cube browser by using mdx
Suppose I have an attribute "District" under "Country" dimension. When dragging this attribute in the cube browser I want to trace which member(s) is/are selected and unselected. I want this to reflect the country total. For example, Country Z has A,
-
Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.
-
Two computer set up ..... music and slideshow issue
I have my Apple TV set up to stream my music from my main computer and stream my Aperture photos that are on another computer. I can access both my swapping the source on the Apple TV.... but i want to be able to play my music while having a slidesho
-
Problems installing Java JRE 7 on Mac OS Lion
I have problems installing jre-7u6 on Mac OS Lion 10.7.4. Downloaded the latest version for this OS from the following link http://jdk7.java.net/download.html. Installation is normally and correctly. But when I try to see in the terminal with the com