File names disappear, move, swap and are not clickable in finder when connected to a server

It only happens with one of the two user accounts setup on this iMac.
I've deleted and recreated the user account but the problem still occurs.

Hi Barak--
Since I don't have as much experience as Dale has, I never faced such an issue.
You could try the following:
Open Ms Project not connected to Project Server
Open and save the local file as an XML file and close Ms Project
Open again MS Project connected to Project Server
Try to open the local XML file
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Similar Messages

Nano 3rd will not unlock and is not visible in iTunes when connected to computer.

My 3rd Gen Nano is stuck in locked position with the screen lit. Additionally it does not show up on the computer or in iTunes when connected. I can't restart or repair myself. I suspect the locked switch may be broken. Any ideas?

First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
Still no joy? See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try it in disk mode.
Putting iPod into disk mode.

After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

Was it EVER jailbroke?

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email a

Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?

Obviously your download was not successful.
What is your operating system? How exactly do you download such files?

What are shortest file names for outlook express and PSE11 to import photos pls

what are shortest file names for outlook express and PSE11 to import photos pls

Hi, Troubled. The size of the file name is pretty much irrelevant here to PSE, but to answer your question directly, you will be able to import a file that has only a single character as its file name (plus the file name needs to have the required extension, such as .jpg)

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

How to insert the file name to the start and the end of a SQL file by a powershell script

I just began to learn powershell script and I have a problem that I cannot figure out. I have a lot of .sql files. I need to insert its file name to the beginning of the file (After USE statement) and the end of the file (before the last END statement). Is
there anybody knowing how to do this?
Thanks so much
Regards

Actually, I want to add a insert SQL statement to the beginning of the file and the end of the file. Only the file name is a variable and different among
different files. All the other sql statements are the same and can be hard coded. Hopefully it helps –
The problem I think is that I want to add the same thing (except the file name) to hundreds of sql files and only the file name is different. I do not want
to add it manually and want to use a script to add it –

Adobe FLME Error Message "Please check if video devices are connected properly and are not used by any other application."

Hello, I'm trying to use my MAC Book Pro with Adobe FMLE. Once I select either my internal or external camera and microphone, in the live encoder I get this error message. "Please check if video devices are connected properly and are not used by any other application." The Facetime HD camera works in Photo Booth. Can someone assist me in what to do please, Thanks in advance!

Hi all ,
We found the solution for this issue .
We have installed the crypto library in global executable directory and any way it will replicate those binaries to individual application servers.
But the parameters are still looking for global executable directory for loading crypto library during time.
So all application servers are trying to load crypto library files from global "exe" instead of local directory, which was clustered .Sometimes during heavy network load it may cause some delays to load the libraries to individual application servers and in turn is causing the license key issues.
Note 982056 - The license key library has not been initialized yet..
SAP Recommend option for all SSF parameters should be instance profile parameters not in default parameters..This was mentioned in below note:
Note 662340 - SSF Encryption Using the SAPCryptolib --- .
But in our Environment SSF and SEC parameter were set in DEFAULT profile instead Instance profile.
Recommendations:
o ssf/ssfapi_lib = <Path and file name of SAPCRYPTOLIB>
o sec/libsapsecu = <Path and file name of SAPCRYPTOLIB>
This was mentioned in the below SAP HELP.
http://help.sap.com/saphelp_nw04/helpdata/en/3d/bf463c6796e61ce10000000a114084/frameset.htm.

Getting this error when saving: Names longer than 31 characters are not supported on the destination volume

I've just tried to save a document in Pages and got this error
Names longer than 31 characters are not supported on the destination volume
Never had a problem like this before. I haven't changed disks or formatted disks. Running latest Yosemite 10.10
The only reference I can find to this error on the internet says that it's for applications prior to OS X which I think we can discount.
The only other reference I can find in the support community relates to one person with problems saving attachments in Mail and dates from early 2014.
Can anybody give me a suggestion on what I might need to do?
Thanks

What format are you saving to?
Where are you saving the files to and what is that volume formatted as?
Have you tested with files from other applications, such as TextEdit?
Peter

Why can't I delete mp3 files from my Trash? They are not locked.

Why can't I delete mp3 files from my Trash? They are not locked. I compressed them into a zip file and then couldn't delete that file either. I've restored them and tried deleting again but no luck. Can anybody please help? iOS 10.8.5

You can't empty the Trash or move a file to the Trash
Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:
Open the Terminal in the Utilities folder and paste the following at the prompt:
sudo rm -Rf ~/.Trash/*
Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

Clendenen02 wrote:
2) It would be equally helpful if there was something that would take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments with the same name but obviously has different extention. For an example
In a Pictures folder
Name: Dark Knight, The.jpeg       Comment: (2008) Genre: Action...             <- copy comment
In a Movie Folder
Name: Dark Knight, The.m4v       Comment:                                               <- paste
and do this for all 700 files
This Bash script will do it.
Edit "PicDir" and "MovDir" to the location of your Folders
(Note: The comment is written to the m4v file using xattr, so the Spotlight comment field appears blank in Finder, but the comment metadata is still indexed by Spotlight (If you add a Spotlight comment from Finder, it is stored both as an extended attribute and in a .DS_Store file)
#!/bin/bash
PicDir=$HOME/Desktop/Pictures
MovDir=$HOME/Desktop/Movies
for f in $PicDir/*
do
     if [ ! -d "$f" -a "${f##*.}" == "jpeg" ]; then
          comment=$(mdls -raw -name kMDItemFinderComment "$f")
          if [[ $comment != "(null)" ]]; then
               picname=${f##*/}
               movname=${picname%.*}.m4v
               if [ -e "$MovDir"/$movname ]; then
                     xattr -w com.apple.metadata:kMDItemFinderComment "\"$comment\"" "$MovDir"/$movname
               fi
          fi
     fi
done

File names disappear, move, swap and are not clickable in finder when connected to a server

Similar Messages

Maybe you are looking for