File not being picked by adapter
My Source file name is xml_a1_en.xml
the test files are of name xml_a1_02_en_2010.xml , xml_a1_03_en_2010.xml
the files are not being picked up by adapter..Is the naming convention wrong for the test files or any reason?
Hi Mr.King,
I am assuming your OS is Unix system right?
If yes -> check the file permission?
if Only Reading: permission should be 664
Move the file after reading: 775
Regards,
Senthilprakash
Similar Messages
-
Large files not being picked by FTP adapter
Hello,
In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
Thank youPlease provide a J2EE trace at logging severity "Debug" for the location
"com.sap.aii.adapter.file". Please do the following:
- increase logging severity to "Debug"
- set log levels to ERROR for all components
- ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
- reproduce the problem and gather the defaultTrace.trc immediately
after you reproduce
- remember to reset the logging severity after you have reproduced as
leaving it on "Debug" can cause performance problems in your system.
Also the ftp server logs will be needed in this case. -
SOLVED: Some files not being picked up with File: protocol
Hello all,
I'm doing some testing of the B2B server on a laptop and seeing some weird behaviour. I have the B2B server set up much like the 850 inbound scenario for the tutorial, except that I am using AS2 over generic exchange with a FILE: transport server. I have "Shoppers" set up as the remote trading partner.
Now for the weirdness. If I put a file in the incoming directory called "ACME_850_4010_1_12345.edi" (it's the one I used for the tutorial, it is picked up fine by the B2B server; it errors out (as expected) because I don't have a trading partner called "ACME" in my setup. However, if I drop a file in the incoming directory called "Shoppers_850_4010_1_12345.edi" with the same exact content as the ACME file - the B2B server never picks up the file to process it. The other weird thing - after putting the Shoppers file in the directory, the B2B server just stops picking up files from that directory altogether until I restart the B2B server.
Any ideas?
DOH - files were not exactly the same. Missing carriage return at the end of the file. Adding it seems to have solved the issue.
Best regards,
JohnHello John,
Trading Partner identification by default is based on the Exchange protocol and in your case of Generic Exchange , it is based on name of the file or the Directory name depending on the following property.
Property: oracle.tip.adapter.b2b.allTPInOneDirectory
Type: boolean
Default Value: false
Description:
If set to true, enables the identification of all files dropped into a particular directory with the trading partner name identified by the directory name: Example: E:\Partners\Acme
The default is to identity each file by prefixing the file with the Trading Partner name Example: Acme_orders.xml
To debug this issue, please enable transport trace and go through the log.
Rgds,Ramesh -
File not getting picked with Sender Adapter
Hello Experts,
i have configured file sender adapter which is polling configured directory every 60 sec. But i could see file not getting picked up. when looked into Communication channel monitoring i could see following error:
Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException : Message ID aa2ec9a0-44b3-11dc-9c5b-0003baa19669(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPDX1DB.SYS_C00120924) violated.
is this due to adapter cache. we are on SP20.
has anybody faced this problem earlier?
Thanks in advance.
Regards
RajeevHello
actually there was small problem in file generation and hence it was failing in message mapping which is resolved. but still that problem is there when it is attempting to delete the file. hence it is not able to delete that file.
can we manually clear the send queues or should we refresh CPA cache?
Thanks
Rajeev -
How to know if file is being picked up by XI through sender file adapter -
Hi
How can I check if the file is being picked up XI through sender file adapter? Can you please help.
Thanks in advanceHi Rajiv,
Select teh File processing mode as
1. Read only -> After reading the file it will change the read only property of the file. Just right click on the file, select properties.If the file has been read then ReadOnly check box will be enabled. If u are testing several times then it will be more useful.
2. Archive -> Then u need to give some other folder name where u want to archive it.
3.Delete -> It will delete if the file has been successfully read.
regards,
Gowtham K.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm -
Alert for file not getting picked up
Hi,
how to create an alert when the file is not picked by adapter..consider a file adapterr...
i mean the file is at the location...for some reasons the file is not being picked up....how to trigger an laert based on this.Aamir,
its not an error...its just a requirement i need to fullfill.
do you have any idea how to go ahead.......
one more thing ..
can you brief me what u said here....if file is not picked up due to some network connectivity issues and you get error in AE then alerts will be triggered
u said only AE and IE errors are captured..then how about the above line u said....how will we trigger alerts...
Edited by: Harsha reddy on Jun 24, 2008 8:03 PM -
File not getting picked by File CC
Hi Experts,
Q1)An issue in files not getting picked up by communication channel in an inbound scenario R/3<XI<-File Port
Retry interval started. Length: 120.0 seconds
7/24/09 1:33:14 PM Error occurred while connecting to the FTP server "XXX.XXX.XX.webdti.com:21": java.net.SocketException: Connection timed out:could be due to invalid address
7/24/09 1:32:00 PM Processing started
Any Quick helps highly appreciated.
Q2)How can i restart an file adapter?
Thanks,
SudhansuHi Sudhanshu,
Regarding your first question, check if you are able to access the file port manually typing the ftp address in internet explorer or any browser.
Regarding your Q2, read this:
http://help.sap.com/saphelp_nw70/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/content.htm
(CTRL+F for "To restart the adapter")
Regards,
Ravi -
Agreements Not Being Picked For SFTP Protocol in Oracle 11G
Hi Anuj ,
PFB the Details of the Issue :
Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
Error Code : B2B-50547
Error Description Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
Patch Level : 14114625
Regards,
RohithHi Anuj ,
Thanks for the reply .
Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
Regards,
Rohith -
Delivery document not being picked while creating shipment document
Dear All,
Issue is regarding creation of shipment document.
As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
I have created a sales order, picking is completed n saved, PGI not yet been done.
Am unable to create a shipment document due to delivery document not being picked.
i/p's will be of great help.
with regards,
VijayashreeDear all,
The issue is solved.
As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
Route determination setting was not correct.
Regards,
Vijayashree -
Item in sales order not being picked into picking list
Hi Gurus,
Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
Many Thanks
ChoudryHi
Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
Try by changing the schedule lines in sales order in VA02
there you try to change the delivery date to past
It might be possible if you had enough stocks at that time
Regards
Raja -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933 -
In Production Order Old Raw Material Batch No. not being picked (FIFO)
Hi,
We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
We have not done any changes into the Master Data nor the config during this period.
Can anyone help what can be the issue ?
Thanks in advance,
Harris PanchalHi,
Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
For that the MM Consultant has configured the following Charac:
1. Stock Determination: Priority
2. Value Assignment Type
3. Batch Number
Which I am feeling should be changed and to be as per the following:
1. Created On
2. Batch Number
In OMCV, Classification is active with following option:
4 Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
3 Classification always in foreground (all batches) for the following movements: 321, 501
Requesting your valuable inputs,
Thanks and regards,
Harris -
What's the error? Longtime site not being picked up by Google
This site has been up for a year and is not being picked up by Google. What is the problem?
Any suggestions much appreciated.
www.elspethcameron.com+(sorry for my english, it usually is better than that I think/hope)+
Ok... Let's see...
www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
The real website is, at least partially, on google with its content as you can see here
http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
Regards,
Cédric -
Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?
Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file. -
I ran into the issue of the 32-bit file not being recognized in LR 5.6
I ran into the issue of the 32-bit file not being recognized in LR 5.6 after it has been saved in PS. I tried every type of file I could save a file as in CC but none of them would be recognized or said it was corrupt. I had exported 3 files to Merge in HDR Pro Photoshop as 32 bit files. I then saved in PS and returned to LR 5.6, but it said the bit depth was not supported . Is this a known issue with LR 5.6 / PS CC?
Hi,
this might help: Video Tutorial – 32-bit HDR TIFF files in LR 4.1 « Julieanne Kost's Blog (Only 32 bit TIFF is supported).
Maybe you are looking for
-
Require help in understanding exporting and importing statistics.
Hi all, I am bit new to this statistics. Can anyone please explain me in detail about these commands. 1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE); 2) exec DBMS
-
Auto numbering issue works fine in IE8 but not works in IE7 word apps plugin
Hi, I have uploaded a word template on Share Point 2010 environment. In the view mode I am able to see the automated numbering however when I am trying to select the edit mode, I cannot see the same behavior in IE7 means that the number format is
-
PDF -- link to web page--- in new tab??
Hi! I´m making a PDF that will be seen in browsers and when I put the links to open web pages they always open on the same tab as the PFD... How can I make them open on a new page o tab?? Is there a Javascript code? Thanks!!!
-
Revision: 10570 Author: [email protected] Date: 2009-09-24 07:53:33 -0700 (Thu, 24 Sep 2009) Log Message: Bug: BLZ-428 - pinging endpoint Returns a HTTP: Status 200 in ie8 QA: Yes - please make sure IE8 works with AMF. Doc: No Details: AMF does
-
Installing 10g R2 on Windows 2000, installer not starting
Hi all, I am installing Oracle 10g R2 on Windows 2000 Compact ProLiant ML570 with 4 CPUs (x86 Family 6 Intel 701 Mhz), 1 Gb of memory, eight disks and one disk controller.). It has 9i already installed. I downloaded the 10g software and extracted the