File not found after importing from external hard drive

I have been importing music from an external hard drive into my Itunes account. Some of the songs transfer fine, but some of them show up in Itunes as being imported, but when I go to listen to them I get a file not found message because the original file cannot be found. If I have the hard drive plugged in there is no problem, but without it I get that message.
Any advice? I"d really like to get all music set up in Itunes.

Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
The iPhoto Help section is very helpful
Reading this forum will teach you a lot about iPhoto
If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
Make mistakes and fix them - that's the way I do it
LN

Similar Messages

Disk utility recovery of files after deleting from external hard drive?

I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all, any help is appreciated.

The files are still on the drive, and will remain unless and until you overwrite them with new data. So don't write anything more to the drive in addition to the two files you added after reformatting it, and do download the free trial version(s) of one or more data recovery utilities:
Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Each is offered in a free demo version that will show you exactly what the full version could recover before you have to pay for anything. There are others on the market, but these are the ones I'm familiar with.
To recover data using any such utility, you must have another drive available on which to save the recovered files. Saving them on the same drive they're being recovered from would just overwrite other files that haven't yet been recovered.

MOV. files will not import from external hard drive to iMac.

Do I have to convert MOV files somehow to be able to import them into an iMac from an external hard drive?
The files were moved from MacBookPro to hard drive. They play fine on external hard drive but won't import into iMac which says file format not recognised.

The file plays on my desktop and from the external hard drive, but I converted one file to an MP4 which then imported to iPhoto. Any recommendations on how to convert to MP4 files in bulk?

How can I change the source file so it is direct from external hard drive?

I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

Hi Bengt, Thanks for your input, much appreciated.
I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

Audio problems after transferring from external hard drive.

I've transferred an unfinished movie from an external hard drive back onto my mac but now when I play it the audio jolts and is crackly for lack of a better word. How can I fix this?
It's a birthday present for someone that I need to give today so help would be much appreciated!

Is your external drive formatted for Mac? Should be Mac OS extended or Mac OS extended (journaled). If it's not, you will need to reformat using the Utilities/Disk Utility app on your Mac -- but reformatting will erase all data on the drive.
The bad playback may just be an iMovie playback display problem that might not appear on your final project. Quickly share your project to iDVD and play it there to see if the sound acts up. If it doesn't, then it's just a playback display issue in iMovie. That can be caused by overlapping sound tracks or too many audio clips or effects, although you didn't mention whether you were talking about audio embedded in your video clips or separate audio clips in your audio track.
The most favored audio format is .aiff, so if you have separate audio clips check your format to see what you have got, and if not .aiff try converting it to .aiff. You can do that in iTunes or by exporting it under Expert Settings as an aiff file to your desktop and then dragging it back in to your movie.
You could try the old standby of closing iMovie and trashing the file com.apple.iMovie.plist found in User (your name)/Library/Preferences. Then do a permissions repair using the Utilities/Disk Utility app on your Mac. Make sure you have at least 15GB of free space for iMovie to work efficiently.
If you are using iTunes music, you might try first burning the music to a music CD, and then importing it from there into your iMovie project.
Hope this helps. Perhaps others will have more suggestions.

Importing from external hard-drive without all the clutter

greetings...i need to import my saved iphoto library from my external hard-drive back to my new computer's iphoto library...how can i best do this without bringing along all the clutter (copies or originals i don't want)...i dropped my entire saved library into my computer's library but ended up with thousands of versions i do not want (i just want the versions i last had-complete with typed information or labeling)...certainly one doesnt' have to go through the whole imported library and delete all the copies and originals they no longer want (that would take a week!)
thanks,
here's what i see on my external hard-drive:
(what should i drag over?)
AlbumData.xml
Data (Folder)
Dir.data
iPhoto.ipspot
iPhotoLock.data
iPod Photo Cache (Folder)
Library.data
Library.iPhoto
Library6.iPhoto
Modified (Folder)
Originals (Folder)
Thumb32Segment.data
Thumb64Segment.data
ThumbJPGSegment.data

(what should i drag over?)
All of it, as a unit.
To restore an iPhoto Library drag the iPhoto Library Folder to the Pictures Folder and start iPhoto. There's no importing involved.
All of the "clutter" is necessary for running iPhoto. If you don't want it, use a different app.
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
Regards
TD

How do I restore backup1.swm files created during system recovery from external hard drive.

On my hp dm1 with windows 7 In full detail, this is what I did. I clicked to do a system recovery, it asked if I wanted to backup the files, I said yes. It said it backed up my files on the external hard drive. I continued the system recovery. It set my computer back to factory settings. I tried to recover my backup, it acted like it was restoring the files and showed them going into the c: area in a folder. I open the folder and it says the folder is empty. I hit properties and the folder contains 10mb+ of data. I go back into my LaCie drive, there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else. Have a 12 page research paper in these back ups that is due in a few hours so any help will be greatly appriciated.

@Daniella1985,
If the standard procdure of locating the program launcher (a .exe file) on the first backup media (disk 1 or the external storage device) is not working, then you can manually extract the files using 7-zip.
7-zip can be found here.
Once 7-zip is installed, open it and navigate to the first .swm file of the backup. Right-click the .swm file and select 7-zip>open archive. Once that opens, it should reveal the contents of the .swm files. If the file contains something you want to keep, you can either extract each invidual file or extract the entire directory. If you want to extract each individual file, highlight the desired file and click the extract button at the top. If you want to extract the entire directory, make sure no items are highlighted and click the extract button at the top.
This is a manual process and it can be a large task depending on how many files were backed up, but it is one method to get the backedup files when the standard procedure is not working.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Importing from external hard drive to iphoto 08 error message

Help im very new to mac. I have iphoto 08 i transfered photos from an external hard drive to iphoto. When I open the photos I transfered I get the following error message..the volume for "cimg0000.jpg" cannot be found insert the disk or connect to the server volume and try again. When I close out of that I get a ! mark on the screen...Like I said Im very new to mac and have absolutely no clue what Im doing any help would be greatly appreciated. M

Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
The iPhoto Help section is very helpful
Reading this forum will teach you a lot about iPhoto
If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
Make mistakes and fix them - that's the way I do it
LN

When importing from external hard drive, photos appear as thumbnail size. How do you edit. Working on imac- snow leopard

I have photos on an external hard drive. When I try to import them to iphotos they appear as a thumbnail (?), small in size. How is the photo restored to its original image. If I try to print, it comes out pixelated. I have many photos on hard drive and would like to restore to original size. Using Leopard OS

and the only time I see the pixellation problem is when the original photo's file size is small.
What did you expect? Of course if the file size is small it won't print well. There isn't enough data to create a reasonable quality print.
Web Photos are - typically - very heavily compressed to speed up downloading. I've seen Facebook photos - for instance - lose 90% of their file size after being "processed". There is no way that a 20kb file is going to print well at any size greater than a postage stamp.
So, basically, the problem you have is the photos you are importing, I'm afriad.
Regards
TD

IMac cannot find library after moving from external hard drive?

After transferring my library from an external hard drive to my new imac the library cannot be found by itunes, although i can see the content in the folder I selected in advanced preferences and the content appears to br there

In Preferences set the loaction of the library that should do the trick.
I have about 1TB of content on an external drive and it works sweetly ( drive needs to be turned on before launching iTunes ).

When importing from external hard drive, creating double songs

I just used the add to library to add lot of songs from an external hard drive. They were in various formats. I-tunes created copies of many of them. This hard drive had 80g worth of music, it would take me forever to go through i-tunes and delete the duplicates.
Why did it do this only to some and how do I correct the problem?

No I tried both neither seems to be working on my system. I used Duplin version 2.5 because 2.6 requires Leopard and I am running tiger.
this is a mess, and I haven't done anything but import the files, I don't want to start setting up play list until I can figure out one of two things.
Why it did it in the first place, I could delete everything and reimport.
Or how to clean it up with doing it one track at a time.
Thanks

Importing FROM external hard drive to new internal hard drive

How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

lksj wrote:
How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
assuming you moved the whole iTunes folder to your new internal HD, try this:
launch iTunes with the options key pressed. this window will appear
click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
any luck ?

I can not find my photos from external hard drive

I installed seagate external hard drive as my back up and time machine is on. I went to iPhoto and I am not able to see my albums. Did I lost all my pictures? How can I retrieve it and put them back on my iPhoto? The external HD is being used as the main portion and it shows that there is no photos. I am using iPhoto 9.6.1.

No idea what you mean by "main driver". Are you saying that you copied/backed up your internal hard drive to the Seagate and are now using that as your boot up?
Also do not know what you mean by "drag/copy master to iPhoto".
Your photos should be contained in your iPhoto library (your Home folder > Pictures)
To make it clear for us:
are you using your regular internal hard drive to work with?
do you have iPhoto there and is it working with your photos?
did you use Time Machine to back up your system to the Seagate?

Events and Projects not opening after Restoring from broken Hard drive.

Hi all!
I have a major problem. After almost 3 months editing 6 projects within the same library the hard drive died. These projects are for a very important client and are worth a lot of time and money. We always backup all the raw material on 3 hard drives so we do have all the raw material, however FCPX for some reason had stopped making backups of the projects after it was updated to 10.1.2. (The loss of these projects could mean the downfall of my production company.) We had a professional data recovery company recover all the data to a new hard drive without any problem, we can see the libraries and open them, HOWEVER the events and projects within the libraries DO NOT OPEN OR SHOW UP.
I have entered into the library in the finder and everything seems to be there, all the events files show up. But FCPX wont recognize them.
Any help would be much appreciated,
Thanks, Tom
You can see here that everything is inside the library folder.
But they don't show up in FCPX.
P.S
Also this file is showing up only after the data was restored.

The journal files are something that've been generated by the data recovery. It's completely hosed the data base.
I don't know if this will work. Try carefully removing all the journal files. Put them somewhere else in folders with the location where they came from. Also move out the currentversion.flexolibrary file. Hopefully without the flexolibrary file the application will generate a new one. Then launch the application.
WHy did you continue to operate when there were no backups, without even a hard drive backup?
Wwhat version of the software are you using? 10.1.2?

IPhoto library chaos after importing from eksternal hard drive

Hi
I just got my first Mac Book pro and started to import my 15.000 photos which are stored on a consumer NAS-disk by via old windows PC.
The pictures are originally organized in folder by year and months.
The result is absolutely chaos..... The number of pictures is quadrupled.
After (a looong time) I get one "event"-folder where I see my original files and one event (or folder?) named with a bunch of letter and numbers, ( ie "7gdaskk5klj3mjll54kj4lk6j4k4") where the same pictures are stored THREE times. It seems to be one version as the original, one low-resolution and one version with a different aspect or view.
It's absolutely impossible to navigate through all this. I thought managing pictures was one of the advantages with Mac - I am not sure any longer
Am I doing something wrong or is there a trick that can streamline my picture library?
I have tried both to import with and without copying pictures to library. Same result.
BR
Andre

The result is absolutely chaos..... The number of pictures is quadrupled.
After (a looong time) I get one "event"-folder where I see my original files and one event (or folder?) named with a bunch of letter and numbers, ( ie "7gdaskk5klj3mjll54kj4lk6j4k4") where the same pictures are stored THREE times. It seems to be one version as the original, one low-resolution and one version with a different aspect or view.
It's absolutely impossible to navigate through all this. I thought managing pictures was one of the advantages with Mac - I am not sure any longer
How are you browsing your imported photos? This looks like you were browsing the iPhoto library using the Finder and not using iPhoto's user interface in the main application window.
When iPhoto imports photos it will store them in the iPhoto library and also additional files to speed up the browsing. It will create a preview of the edited version to share with the Media browser and a thumbnail to be used in the browser. All these files will be stored in subfolders of the library with cryptic names. Browse your photos using iPhoto's interface and don't access them directly in the Finder. You are risking to corrupt the library this way. After all, it is iPhoto's job to manage and to retrieve the photos for you.

File not found after importing from external hard drive

Similar Messages

Maybe you are looking for