File not found error and playlist probs

Sorry if this is a re-post, I had a look though but couldn'r find the answers I'm looking for.
I just upgraded to iTunes 7.
first all my playlists dissapeared, and after many hours I recreated them.
Now, suddenly everytime I try and play a track I get "orriginal file could not be found" if I locate it when given the option it plays it, but I dont want to do this for all 3000 songs. I reimported all my files from my iTunes music folder, bu now I just have 2 copys of everything, one with an ! symbol and one without. I don't really want to go through and delete the bad file, aswhen I do that it goes out of my playlist and I would have to start those all over again, again. Whats going on and how do I fix it?
cheers, kath x

i deleted itunes off the computer and reinstalled it. worked ok apart from i had to recreate all my playlists again!

Similar Messages

Startup screen displays a "File not found" error and I can't lack in a startup or home page.

When I startup Firefox, I get:
File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/browserconfig.properties.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
When I go into Tools>Options to set my home page, it works one time and then reverts back to : resource:/browserconfig.properties
I can't go to Firefox 9 because applications I need are not supprting it, yet.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Problems with cached previews and File Not Found errors in preview and build

I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Apache plug-in prob : when trying to access '/weblogic/' URL , "404 : file not found" error is shown

On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server HTML
page, welcome file, or default servlet, as defined for the default Web Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not found" error.
What other configuration is needed ? Do I have to specify '/weblogic/' name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
S

Forgot to mention , I've also added following configuration in httpd.conf :
LoadModule weblogic_module modules\mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7501
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
"S" <[email protected]> wrote:
>
On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when
I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on
apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory
to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to
the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server
HTML
page, welcome file, or default servlet, as defined for the default Web
Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not
found" error.
What other configuration is needed ? Do I have to specify '/weblogic/'
name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
S

Most search engines are not working, only Google Search works and I get 404 file not found error when clicking the links.

I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

"file not found" error in VI Logger when running an imported VI Logger task

I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
Jake

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

Finding a "file not found" error in a sub vi

I have a vi which includes about two layers of sub vi's. Various sub vi's read data from files. When I run the main vi, I get a file not found error, but the error message does not identify either the file nor the sub vi within which the error occurs. Shor of manually going through each vi, how can I find the error source?
Solved!
Go to Solution.

eearle wrote:
I don't kow where all of the read file vi's are.
You don't need to - that's the whole point of searching for a VI. Are you getting an error dialog? If so, does it tell you the name of the VI as the source? If so, just use the Find tool to find all instances of that VI and use the probes as Darin mentioned to track down where the error is occurring.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File not found error and playlist probs

Similar Messages

Maybe you are looking for