File not found if No Hit along time to Serevr

Hi guys ,,
Am using Shaepoint2013 with Serevr2012.
I have an Issue with SharePoint Site If there is no Hit on the server after some times it show me error with "File Not Found"
and after a while everything is going OK .
Is there any setting in IIS i have to do .

Do you mean that if no-one uses your site for a while then it tries to load a page but times out?
If so this is probably due to the sites falling out of the cache. Whilst you can muck about with some settings there it's not a great idea. A much safer option is looking into why it takes so long to spin up. There's a stage that SharePoint goes through
before starting the application pool called the Certificate Revocation List checks (also known by some as CAPI2 errors), this can take a long time if you don't have internet access from your servers and can slow down application pool starts.
https://support.microsoft.com/KB/2625048?wa=wsignin1.0
Sir ,, I dont have internet access , my Site in Intranet
The users connect to real Server through DNS there where I have my Own Custom Site Name.
in the Morning when the First User try to connect it give "File Not found" for Some time, But if I change the Url goes to Direct to reall Serevr One Time , there every thing is fine Even through
DNS

Similar Messages

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Hypervisor: Create Standalone Real-Time Application (Error at deploying: File not found)

Hello,
I am using Hypservisor. With "Build Specifications" in the project explore I want to create a standalone real-time application.
In my first try I only want to print some texts onto the real-time console (HyperTerminal) using the function "RT Debug String.vi". I built the real-time application successfully and got the rtexe-file locally on the windows system. But as I tried to deploy the application to the target system, I got the error: "File not found". Please check the attached file "error.txt" for details.
I don't understand which file is not found. Or I used "\" as path separators. Is it wrong? I'd appreciate if you'd have any idea of the problem. Thank you very much.
Regards,
Scarletice
Solved!
Go to Solution.
Attachments:
ERROR.txt ‏1 KB
builds.zip ‏153 KB

Hello Casey,
Thank you very much for your reply and your interest in our project. We are using Real-Time Hypervisor for the setup of our test stand. We use the Windows system to show the GUI and the Real-Time system for the real-time machine control and online data storage. We use shared variables and shared memory for the data exchange between the two systems.
The system works generally quite fine now. But we still have to face new problems at each step forwards. I'm sure, I'll have more questions. I'd appreciate your advices. Thanks sincerely.
Best regards,
Scarletice

I am having a terrible time trying to convert my Quick Time file to an AVI file to use in a powerpoint presentation. Any suggestions? I am getting Error .43 file not found?

I am having a terrible time trying to convert my QT file to an AVI file so I can use in PowerPoint. I am getting Error 43 File not Found, any suggestions?

Hi Jenna,
The error your getting suggests a file path problem.
How are you embedding the movie in PP and where is the movie file located relative to the PP file? Are you getting this error within PP when the slide containing the embedded video is displayed?
If you embed a movie and then move it or change its name then PP will generate this error.
Alastair.

Run-time error 53 File not found (makes BI Publisher quite unuseable!)

Upgraded to BIP v 10.1.3.3.2
Open a template with the template builder
Load a source XML file
Proceed to choose Insert-> Field....
Microsoft message pops up:
Microsoft Visual Basic
Run-time error '53':
File Not Found.
This error, according to Microsoft and other technical sources SHOULD actually tell you what the file is that isn't found, however when run through the template builder, it never tells you any file name, just the above error message!
I saw one other post on this forum about this problem, and it was related to the Java Home, so I went to TOOLS-> OPTIONS and my java home there is:
C:\Program Files\Java\jre1.5.0_12
So this should be high enough JRE version.
ANy suggestions? What file or *.DLL can it not find? We have many people at a client (and me!) that have this issue.
-Greg

Pradeep,
I am not trying to utilize the desktop template builder to log onto BIP enterprise.
I am using it in an E-business suite environment, not a standalone BIP enterprise reporting environment. I simply use it right now to develop templates when I have valid XML to work with.
Many other features are working, but any features that seem to be new such as repeating group, conditional region, conditional format, the insert field palet, among others.
ANY feature that requires a .net service to be kicked off works only 10% of the time.

Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

Hey Podieboy,
Thanks for the question. It sounds like you are receiving a message about missing files when you start iTunes. The following resource may provide more information:
iTunes: Finding lost media and downloads - Apple Support
http://support.apple.com/en-us/TS1408
If the file/song is not important, you can simply delete it from your library to avoid this error message in the future:
iTunes 12 for Windows: Delete songs, playlists, or other items
http://support.apple.com/kb/PH20391
Thanks,
Matt M.

JBO:33001 bc4j.xcfg file not found in class path

Hi,
I am yet another victim of the age-old error JBO:33001 bc4j.xcfg file not found in class path, When i have my BC4JApp.jar in Tomcat Web-inf/lib directory. All the other jar files and class files in my webserver-application web-inf classes and lib directory works.
But Tomcat server is not able to read this bc4j.xcfg file. I can see in my jar file that this bc4j.xcfg exists and in the specified package directory. still the problem persists. My BC4JApp.jar is perfectly working when i use JDeveloper. but not when i use tomcat4.0 and call a JSP using BC4JApp.jar from browser (My environment is Jdeveloper3.2, Tomcat4.0+IIS in middle tier and oracle 8i as DB, everything on windows2k)
I have gone through almost all the threads possible that relates to this error in this form. None of them have a answer except to say "put the file in classpath". and last reply is "will fix in jDeveloper 9i. So what happens to us who are working in Jdeveloper 3.2?
1. I have this file in my jar file.
2. I also tried creating a seperate directory manually, with the same name as my package under web-inf/classes, web-inf/lib , just under web-inf directory and atlast under approot directory also. I tried having my package directory containing bc4j.xcfg in these folders one at a time and also tried having this directory in all these folders at the same time.
Still no solution.
Itz frustrating that neither proper documentation nor a right url page nor i am aware of available addressing this. page links given in above threads only gives me the wonderful page of ie's "Page cannot be displayed".
Is there a answer to this error and my problem. If this doesn't work, then i have to all the way develop from scratch creating my jsp using JDBC calls and Stored packages etc.
I don't want to give up on this Jdeveloper at this final moment because if this bc4j.xcfg file is found, my application will work perfectly. on these final moments, if this doesn't work, i am frightened to imagine to develop my application in standard way. Atlast, if thatz the option left,we have to do that bcos our production date is close by.
Please can some one in this forum or Jdeveloper help me to solve this problem. I am desperate and very urgent.
Waiting for a reply from Jdev team very much...
( I just posted in the other thread which is pretty old, dated backto May 2001, which was relevant to this error. Just to make sure it is noticed, I am posting it seperately too)
Thanks
Hari(2/3/02)

Hi All,
For those who are following this thread, I got a solution for this error with the help of Jdev Team.
This solution may work, if you have deployed your application in Tomcat4.0.1. This is the environment in which I work and tested.
As you may be aware, Tomcat ignores value in CLASSPATH variable.
To see any files that are existing or newly deployed, it has it own way of detecting it.
Addition information on Tomcat working, you can follow this link,
http://jakarta.apache.org/tomcat/tomcat-4.0-doc/index.html
Coming to point, Tomcat has got five classloaders and each classloader invoked, looks in their related directories for files in following order.
1. /WEB-INF/classes of your web-application
2. /WEB-INF/lib/*.jar of your web application
3. BootStrap classes of your JVM (Tomcat's $JAVA_HOME/jre/lib/ext)
4. System class loader classes($CATALINA_HOME/bin/bootstrap.jar,CATALINA_HOME/lib/tools.jar)
5. $CATALINA_HOME/common/classes
6. $CATALINA_HOME/common/lib/*.jar
7. $CATALINA_HOME//classes
8. $CATALINA_HOME/lib/*.jar
So All your individual application related files should be deployed in your application's WEB-INF/classes or WEB-INF/lib directory accordingly.
If your application files are unpacked, they should be deployed or copied under WEB-INF/classes directory
if the files are within a jar, they should be under WEB-INF/lib directory.
If your Jar-files contains bc4j components, then those jar files should be deployed under WEB-INF/lib directory. Also,do the next step to copy all relavant BC4J runtime libraries under lib directory.
IMPORTANT: Please remember to copy and paste all the required BC4j runtime libraries in the Same WEB-INF/lib directory along with your application jar files. This is the real reason which can solve this JBO:33001 to disappear. It worked for me.
To configure your directory for tag-lib uri's, use web.xml to set the taglib-uri attribute.
Put your web.xml and DataTags.tld in the WEB-INF directory.
Your simple web.xml may look like as follows.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <taglib>
          <taglib-uri>
               /webapp/DataTags.tld
          </taglib-uri>
          <taglib-location>
               /WEB-INF/DataTags.tld
          </taglib-location>
     </taglib>
</web-app>
You may then modify this web.xml to suit further requirements of your application.
Remember to stop and restart the Tomcat Server (service) by using shutdown and startup scripts after updating any jar files/class files/ JSP or source files deployed in Tomcat.
Sometimes, only this helps even though your context's reloadable attribute is set to true in Tomcat Server's server.xml file.
Hope this above information helps you to solve this error in Tomcat environment. My Sincere thanks once again to Juan and Jdev team for their help and efforts to solve this problem.
Thanks
Hari

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File not found error 43 message. What is this?

I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
Any ideas?
Thanks

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

Deployment utility gives file not found warning, but build completes succesfully.

When running the deployment utility, I am able to analyze source files successfully; no problems there. When I go to build, all appears to go well until I click the popup that has the message: "The build is finished." After closing the popup, I get the following warning:
"Warning: This problem will cause an error when building a deployable image or an installer. The following file(s) were not found:"
It's followed by a list of dozens of files. However, I verified that all files are included in the search directories.
I installed the deployment as-is and it seems to run ok; it finds the files it's supposed to. However, I'm going to have a hard time selling this procedure off to QA if the deployment shows a 'file not found' message.
My question is: why do I get the 'file not found' warning during the deployment build process, yet the 'analyze source file' step finishes ok and the deployed files work ok?

These files are all relative and are part of the workspace. I did find a
workaround to the problem.
In the search directories selection box, the top-level entry is "Current
sequence file" with subdir search enabled. The next entry is the workspace
directory with subdir search enabled; all files are in subdirs of the
workspace directory. The remaining entries are unchecked or not
user-defined (ie.: other NI directories on my computer). In order for the
deployment to work, I had to enable the third entry on the list: "Initial
directory" along with subdir enabled. However, the initial directory is
the same as the workspace directory (since I opened teststand by
double-clicking on my .tsw file). What I don't understand is why should it
matter that I have initial directory on the path if it's the same as the
entry before it?

Logic X EXS24 - audio file not found

I know this question crops up often and is usually a Garageband/missing downloadable contents issue but that's not the case here.
I'm a long time Logic user (pre Apple) and can usually work my way around issue or find answers online, but I'm completely stuck with this one.
I've been running my current setup for about eight months now (new Mac Pro, latest versions of Logic Pro and OS) with no problem at all.
I have an extensive sound library stored on external drives (Pegasus2) via Firewire and everything has been zipping along, then yesterday for no know reason EXS24 suddenly gives me the "audio file not found" message when trying to create a new instrument.
All previously created EXS24 instruments load just fine as the audio files were copied onto the project drive, but Logic no longer sees the library on my external drive.
The external drive is working just fine (troubleshooting shows no errors or issues) and I can access it just fine, load sounds into other applications etc), I can also manually drag individual samples into my EXS24 instrument so that it "sees" them, but very impractical to do this with so many audio files, and obviously that's not how it's supposed to work.
I thought I had found a workaround yesterday by making an alias of the folder containing the sound library and copying the alias to User/Music/Audio Music Apps and that worked while I was working yesterday, but on loading Logic today the problem is back.
I've reindexed the drive in question with Spotlight..
As mentioned, this setup has worked for months (and for years on my previous hardware) but suddenly Logic can no longer see those files via EXS24.
Any suggestions as to why this suddenly happened, and more importantly, on a permanent fix?
B.

It doesn't really matter where you put the samples, as the EXS will search for them when you try to load an instrument that references them.
The reason why the "davidfelton" bit is in there, is that the location of the samples is stored inside EXS files. At load time, if the samples are not at that location, the EXS will search for them, and once found, will write the new location back to the EXS file so it doesn't have to search next time.
If the EXS cannot find your samples, then open the EXS preferences and make sure your default search locations will find the files (ie you don't have it set to look on one drive, when the samples are on a different one).
Or you can use the project managers "resolve" function to update the sample locations to all the EXS files in one go.
Any probs, post back...

"BIOS ME update....file not found " since a P67A-GD65 bios update failed

Hi everyone,
I've decided to post this little message after looking for a solution over the web and over the MSI forum because I've got a problem since the BIOS update of my P67A-GD65 MB.
I've followed the update process for the 4.32 BIOS using an USB key, the update started but did not continue after reboot, and since My PC is out of order
The "BIOS ME update....file not found " message is displayed after lots of booting tries, using plenty of methods.
I've looked and tried all the techniques I could find over the web, I've tried :
-PC with and without SATA drives connected
-the last 4 versions of the bios found on-line, even the original version of my MB before updating (1.19)
-4 different usb keys (from 128 Mb to 4 GB)
-all front and back usb ports
Each time, on each usb key, there were several bios versions, even one renamed to AMIBOOT.ROM for testing the recovery method.
I've also tried to make the keys bootable by using the “MSIHQ USB Bootable” tool with the 1.19 bios (after the boot fix), the usb key appears in the F11 boot menu but when I select it, the PC boots but still shows me the "BIOS ME update....file not found " message.
I've also tried a clear CMOS with several power off.
I've also tried to burn a CD containing only a AMIBOOT.ROM file, and to boot on it, but same problem occurs.
In brief, it seems that my PC does not recognize my Key's content, whatever it is.
I've you got an idea to help me ?
Last precision, the update process that failed was using the 4.3 bios version, but my CPU is a not an IvyBridge .
thanks for your help

HI
I've tried with your file , that's better but not solved
the "BIOS ME update....file not found" has gone but my bios is still inacessible.
I put the usb key (with the decompressed file) and the PC starts, displays the MSI boot logo, and then shows a message for hitting F1 or F2 bla bla bla...
Whatever the key that has been hit (F1 or F2, and only the first time), the pc boots again and again after displaying the boot logo, followed by a 30 seconds black screen.
If I remove the key, I've got a message that says I have to put a key on an usb port, and when I put back the usb key , the PC starts to boot again and again.
Once again , I'm stuck.
thanks for your help

ITunes: "File not found"

I have been having a problem for quite some time with iTunes and I can't seem to get an answer as to how to resolve it. On many of my songs listed in the iTunes library, when I click on the song I get an error message to the effect of "File not found. Would you like iTunes to try to locate this file?", and when I say "yes" to this, I get my "iTunes Music" folder (where my music files are stored) and I have to search around and find the file (which I am usually able to do) and then it plays. However, when sometime later I may try to play the song again, I get the same error message and have to go through the same process. Can anyone explain why this may be happening and how I can prevent it from happening again? What is the simplest way to store your music files on your hard drive to ensure iTunes captures everything and does not have difficulty locating files? Many thanks for your help and advice!

This really shouldn't happen. There are no setting in iTunes to prevent it.
If you want to do a bit of detective work, you find out where iTunes this the missing file is located.
If you want to try this, identify a track or two with exclamation marks.
Open iTunes Library.xml with WORDPAD. (it's in the iTunes folder)
Use search to look for the track or album name. If you know the actual file name you can use that but watch out for spaces, the space character is represented by %20.
WHen you have found a track or album you need to scroll to the line starting:
<key>Location</key>
This contains the path and file name.
Is it correct, or something different?
That might give you clue about files being moved or renamed.
If it is all correct them something odd is happening with iTunes.
Message was edited by: polydorus

How to embed audio to my website using quicktime when I get "file not found

hi,
i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be..
but even just linking to audio (mp4) files won't work...
everything is o.k. with non-audio links on my website - only the mp4 audio can't be found.
can anyone help me? or post the correct code?
I've tried using these formats..
<EMBED SRC="anymovie.mov" HEIGHT=176 WIDTH=136>
<embed
src="http://www.crossandthrone.com/.samples/qt/sample-reference2.mov"
width="242" height="199" autoplay="false" loop="false"
controller="true" bgcolor="#666666"
pluginspage="http://www.apple.com/quicktime/"></embed>
the pages that should play audio just have a quicktime file with a question mark on them
help would be much appreciated!

Start here:
http://www.mediacollege.com/video/streaming/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"subdued2u" <[email protected]> wrote in
message
news:gbg2th$r13$[email protected]..
> Hello ,guys, i have a website,, and i would like to add
upload vidoes on
my
> website i have tried but did not work can anyone please
tell me how to
embed my
> videos in my website using dreamwever ?
> thank so much
>

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

File not found if No Hit along time to Serevr

Similar Messages

Maybe you are looking for