File not found in my media player but yes it's fou...

Yup so, I got my Nokia C6 phone about two months ago, and everything has been working perfectly until these past weeks.
When I connect my phone with the USB-cabel to my PC, everything is still working alright. Then I go to Windows Media Player, and it recognizes my phone correctly. Although, When I press Synchronize, it seems like everything is going on well but then I disconnect my phone from the computer and the files are not found in my media player, just in my File manager! Is there any chance to fix this because it really bothers me?

http://perian.org
Free. Try it.

Similar Messages

  • EA4500 Windows 7 cannot index files so files not seen by Windows Media Player

    I have setup a disk on the USB port of the EA4500 and have 4 folders.  One being music.  I want to access this folder via my Wireless laptop with Windows Media Player but I only get a handful of the 3000+ songs on the disk.  A hard wired PC can access the files but not a wireless laptop.  I'm not sure where the issue is.  If I use the drive via //host/Music the Star ratings are not available but I get all music,  if I map a drive then I get star rating but only a handful of songs.  I have tried to change permission but I cannot change the file permissions on the Linksys.
    Solved!
    Go to Solution.

    You should be able to change the permissions in the router page. Are you using the Classic Firmware or the Linksys Smart Wifi? If you are using the Linksys Smart Wifi firmware, it is under USB Storage > Folder Access. If you are using the Classic Firmware, it is under Storage > Administration. The laptop should be able see all files just like the desktop.

  • [SOLVED] == ERROR: file not found: `/sbin/dmsetup'

    [EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
    pacman -Syu --ignore linux
    Then explicitly update the kernel alone:
    pacman -S linux
    [EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
    [EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
    I've read the news item...
    Changes to LVM
    2013-02-12 - Thomas Bächler
    With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
        The lvm2 initramfs hook now requires the udev hook.
        The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
        You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
        If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
        The lvmwait kernel command line option is no longer needed and has no effect.
    If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
    ...and I do get the message...
    ==> ERROR: file not found: `/sbin/dmsetup'
    ...but after a full system update with...
    pacman -Syu
    ...when I execute...
    mkinitcpio -p linux
    ...this is what I get...
    Building image from preset: 'default'
    /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
    Building image from preset: 'fallback'
    /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
    So of course if I reboot I get the dreaded 'No volume groups found' message.
    I should mention that I use the systemd path and service to move the kennel after it has been updated.
    Last edited by KairiTech (2013-04-07 02:45:12)

    With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
        The lvm2 initramfs hook now requires the udev hook.
        The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
        You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
        If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
        The lvmwait kernel command line option is no longer needed and has no effect.
    Just to confirm. You did all these steps, right?
    EDIT: I just noticed something:
    KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
    Replace
    mdadm
    with
    mdadm_udev
    . Maybe this is nothing, but it is recommended to use this one instead of the other.
    NEW EDIT: Expecially this one
    The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
    Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

  • My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

    I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

    Hi Applefan 6968,
    If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    - Brenden

  • Playback Failed  This media file format is invalid or not supported by Adobe Media Player.

    What is this? i've installed air and media player and most of the content ends with this alert:
    Playback Failed
    This media file format is invalid or not supported by Adobe Media Player.
    what is wrong? do i need some codecs or something?
    please, HELP!
    kynades
    PS day after i've tried play regular flv and got this mesage:
    Playback Failed
    There was an error while playing this video.
    Some video errors can be fixed by clicking the back button and playing the video again.
    i assume this Adobe media player is just another piece of ****. sad.

    "DITTO".
    JUST ABOUT EVERYONE IS HAVING THE SAME PROBLEMS WITH ADOBE MEDIA PLAYER (AMP) AND OTHER RELATED PRODUCTS!
    INSTALLATION ERRORS!
    UNINSTALL ERRORS!
    SOMETHING IS SERIOUSLY GONE AMUCK AND GOOFY WITH THIS OUTFIT.
    IT IS JUST THE LOUSIEST AND SHABBIEST WAY THE ADOBE MAKES ITS SHAMEFULLY LOW QUALITY (SOFTWARE???) PRODUCTS.
    MOST EVERYTHING, ALMOST NEVER WORK RIGHT.
    JUST A TERRIBLE WASTE OF EVERYONE'S TIME AND EFFORTS.
    ADOBE SEEMS TO HAVE BECOME JUST ANOTHER VENUE PUSHER FOR INTERNET SPAM AD-PUSHERS.
    SAD.
    VERY SAD.
    I AM GOING TO DE-INSTALL EVERY DAMNED ADOBE SHABBY SOFTWARE PRODUCT.
    TOO MUCH HASSEL.
    TOO MUCH WASTE OF EVERYONE'S TIME AND EFFORTS.
    ** NOTE **
    FIND OTHER RELIABLE SOFTWARE FIRMS THAT HAVE DEVELOPED *.FLV FILE PLAYERS -- FOR THE TIME BEING -- UNTIL ALL *.FLV FILES HAVE BEEN CONVERTED TO *.MWV OR SOMETHING THAT WORKS FLAWLESSLY.
    THE *.FLV FILES SHOULD BE BANNED FROM ALL OF THE INTERNET WEBSITES AS UNSTABLE AND SHABBY.
    AND SAY GOODBYE TO ALL SHABBY, LOUSY, ROTTEN ADOBE PRODUCTS.
    IT IS QUITE EVIDENT THAT LAZY, DEAF, DUMB, BLIND FOLKS (WITH PANTS AROUND THE ANKLES) AT THIS SHABBY OUTFIT ARE NOT GOING TO WORK HARD ENOUGH TO EVER PRODUCE QUALITY PRODUCTS.
    SO, SAY GOODBYE TO IT AND ITS SHABBY PRODUCTS AND FIND ALTERNATE RELIABLE, QUALITY SOURCES THAT MEET OUR, THE CUSTOMERS, NEEDS.
    IF YOU READ THIS OUTFIT'S GOOFY LICENSING TEXT, IT CLEARLY STATES THAT: ". . . IT DOES NOT WARRANTY THE OPERABILITY, OR MERCHANTABILITY, FOR ANY INTENDED PURPOSES . . .".
    MEANING, EVEN THIS OUTFIT ITSELF DOESN'T BELIEVE IN THE QUALITY OR PERFORMANCE OF ITS OWN SHABBY PRODUCTS.
    IMAGINE THAT, FOLKS.
    WHAT OTHER PROOF ANYONE NEEDS THAT THIS OUTFIT MAKES THINGS THAT YOU THINK WOULD WORK.
    WHAT A JOKE.
    ACTIONS:
    WEB SEARCH FOR:
    *.FLV PLAYERS, OTHER THAN ADOBE.
    *.FLV FILE CONVERTERS.
    WHAT A GOOFUS.
    +++++++++++++++++++++
    +++++++++++++++++++++
    7-ZipeMuleAzureusAres Galaxy
    http://www.UberDownloads.com
    Batch Convert any File Format
    Convert many files at the same time.
    You can convert any audio or video file format into any other audio or video format.
    Convert many files at the same time.
    Quickly Convert to Mobile Device Formats.
    Add video clips to your DVD by dropping them onto DVD styler.
    Organize and change the order of the video clips too!
    Convert files and put them on your iPod, Apple TV, Zune and PSP!
    Convert Audio Files to Other Formats with:
    Convert any video or audio file to another format.
    Convert files for iPod, Zune, PSP, & Apple TV!
    Free Open-Source Version,
    Free Unlimited Use and Updates!
    Clicking this Download button starts InstallIQ, it will manage your installation.
    Learn More.
    What is MediaCoder?
    MediaCoder is a FREE universal batch media transcoder!
    This means MediaCoder can convert any audio or video file format into any other video or audio file format.
    You can use MediaCoder to convert your .AVI files to .MPG files.
    You can convert your .WMA files to .MP3 files.
    Why would anyone ever need this?
    Well certain audio and video players may only play certain formats.
    Let's say you have a great movie you want to watch on your iPod while at the gym.
    But your video is in .WMV format, and your iPOD doesn't play this type of movie!
    Well you can use MediaCoder to convert your .WMV file to a MPEG-4 file, then just sync to your ipod.
    You can do this for your iPod, Zune, PSP and Apple TV; all through a simple interface.
    Supported Formats:
    MP3, Vorbis, AAC, AAC+, AAC+v2, MusePack, Speex, AMR, WMA, RealAudio, mp3PRO*,
    FLAC, WavPack, Monkey's Audio, OptimFrog, AAC Lossless, TTA, WAV/PCM, Waveform,
    H.264, XviD, DivX, MPEG 1/2/4, Theora, Flash Video, Dirac, 3ivx*, RealVideo*, Windows Media Video (*.WMV), AVI,
    MPEG/VOB, Matroska, MP4, PMP, RealMedia*, ASF, Quicktime*, OGM*, CD, DVD, VCD, SVCD, CUESheet*, HTTP*, FTP*, RTSP*, UDP*
    Requirements
    Windows 98/Me/NT/2000/XP/2003 Server/Vista
    About MediaCoder
    MediaCoder is open source software and is made freely availble for personal use.
    Source code and license information for DVD styler can be found here:
    MediaCoder Project Page
    http://www.UberDownloads.com
    © 2008. All Rights Reserved.

  • 'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK.  Help, please!

    Hi Again!
    I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
    Here are the details:  I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it).  I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box!  Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue. 
    Here's how this problem began:  I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black.  I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam.  When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message.  The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites!  They didn't have a solution, either.  I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible.  Here are the sites that receive the error message:
    http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
    http://cbslocal.com/eagles
    http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
    http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
    http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
    Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere.  Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time!  I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
    Thanks for taking the time to read my post.
    All suggestions/solutions are gratefully accepted.
    Thanks in advance for your help!
    DogPal 

    File Not Found Error in Welcome Screen
    07-Nov-2013 10:25
    Tags: #dreamweaver_cs6_update
    Help please!
    Live preview also not working.
    I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
    "On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
    Thanks,
    Martin Bond
    [personal information removed by moderator]

  • File Not found, but music is on iPod

    OK, this is strange. I just added some more music to my iPod. But it said that 27 songs hadn't been added. But, they ARE on my iPod, and in my iTunes library and the preferences is pointing in the right direction for the library of all my music. So why do I keep getting file not found?

    I think you misunderstood the problem. Music is on my computer in my iTunes folder under the correct file name and when i try to play the file using itunes there is an error message 'original file cannot be found, would you like to locate it?' If you locate the file where it is supposed to be, it will play the song. It seems to just be losing information about where files are stored on my computer randomly. Could this be because my files are stored on an external hdd?

  • [Solved] grub2: file not found but booting fine

    I just ran grub-mkconfig to update my grub.cfg because I installed E4rat. But now I have a problem: Every entry in grub2 can be booted and E4rat really boosted my boot process so actually everything is fine. But while grub2 is loading it says something like:
    Grub 2 is loading...
    Welcome to Grub 2!
    error: file not found.
    error: file not found.
    error: file not found.
    Now grub shows up and everything is as it should be. When I select Arch it again says "error: file not found." three times and continues with a normal boot process. So basically it's nothing that would brake my system but something seems not right and that's just a huge annoyance.
    Here's my grub.cfg just in case:
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=light-blue/black
    set menu_color_highlight=light-cyan/blue
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
    else
    search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=1440x900x32
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_GB
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
    else
    search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
    fi
    insmod png
    background_image -m stretch /boot/grub/archlinux.png
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
    else
    search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch Linux GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-f7960d1a-77ab-4230-ab43-ff931f0b2175' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos5'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 --hint='hd0,msdos5' f7960d1a-77ab-4230-ab43-ff931f0b2175
    else
    search --no-floppy --fs-uuid --set=root f7960d1a-77ab-4230-ab43-ff931f0b2175
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=UUID=f7960d1a-77ab-4230-ab43-ff931f0b2175 ro init=/sbin/e4rat-preload quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    menuentry 'Windows 7' {
    set root='(hd0,1)'; set legacy_hdbias='0'
    parttool "$root" boot+
    chainloader '+1'
    ### END /etc/grub.d/40_custom ###
    And my /etc/default/grub:
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch Linux"
    # Default:
    #GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    # Splashy boot:
    GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 logo.nologo console=tty1 splash=silent,fadein,fadeout,theme:arch-black"
    GRUB_CMDLINE_LINUX="init=/sbin/e4rat-preload"
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    # GRUB_GFXMODE=auto
    GRUB_GFXMODE=1440x900x32
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    GRUB_BACKGROUND="/boot/grub/archlinux.png"
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="light-blue/black"
    GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    I haven't updated my grub.cfg in a while because there was no need to.
    Thanks in advance for advices.
    Last edited by retzu (2012-04-16 14:16:02)

    I have the same error message as in the first post.  "error: file not found" listed three times when I first choose Arch from the Grub2 menu.  The solution linked to by the.ridikulus.rat would not seem to apply as I do not have the locales en* in /boot/grub/locale  BTW, I am in the US.  The system does boot though.
    I just fixed this a few seconds ago and was going to post how, basically I just did "cp /boot/grub/locale/[email protected] /boot/grub/locale/en_US.mo" which seem to do the trick, the reason I didn't fix this sooner is the error only stays up for a very small fraction of a second making it hard to read.
    # ls /boot/grub/locale
    ast.mo da.mo fi.mo hu.mo it.mo nl.mo ru.mo uk.mo zh_CN.mo
    ca.mo de.mo fr.mo id.mo ko.mo pl.mo sv.mo vi.mo
    EDIT:  I get the same three "error: file not found" messages when I boot Fedora (a multiboot system).  This is with grub2 installed from Arch Linux.
    Last edited by David Batson (2012-05-02 20:03:41)

  • I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not sure what to do.

    I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.

    I have been noticing videos on hulu, youtube and even itunes have been downloading slow and pausing in the middle of watching them. Does anyone have any suggestions on what I should do? Someone told me its my media player, but I am not very good at computers and don't want to download the wrong thing.

  • A video clip that works fine in windows media player but not in Premiere

    I have an AVI video clip file that I recorded from an old VHS tape many years back. The file plays just fine in Windows Media Player but when I import it into the latest version of Premiere Pro CS6 the video portion shows nothing but a green screen. The audio track plays fine. I've tried using Adobe Media Encoder to change it into a variety of different formats. Some don't even produce a file and some do but don't work any differently than the original within Premiere. Any suggestions?
    thanx a bunch,
    mike

    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • I am trying to install livecycle trial version, but i get Error 13:11 Source file not found

    Why do they even offer a free trial version of livecycle es4,  when its obviously not free??????
    i have tried from two different computers, windows 7 and windows 8, and before it can finish installing,
    a messsage pops up saying Error 13:11 Source file not found verify file exsist.  what does that even mean?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • New Nano shows in source but file not found

    This is really frustrating. My new nano starts to sync in I-tunes. IT will start to download my library then about a third of the way into it an error comes up that says "Nano can not be updated the required file can not be found". I've updated i-tunes, restored the Nano, even though it's new. It shows up on the I-tunes source list and in device manager. Then after I get the error of "file not found" I-tunes says update complete. When I disconnect the ipod, it's frozen on do not disconnect and I have to reset it.
    Any ideas?

    Hi,
    Did you updated Latest CR_content  and Cimsap?
    If not download from SAP marketplace and update in SLD.
    Regards,
    Manivannan P

  • On certain news web sites, the front page displays ok, but click on a story, it displays and then I get the popup file not found.

    On the Boston Globe web page, for example, their home page displays just fine. When I click on any news title, the page displays for an instant and then this pops up:
    File not found
    Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/chrome/en-US.jar!/locale/browser-region/region.propertieswd.sharethis.com.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.
    I click on the "Try Again" button and nothing happens.

    Vuze installs ask.com's tool bar also. Check for a Vuze plug in. Thanks for the fix.

  • Deployment utility gives file not found warning, but build completes succesfully.

    When running the deployment utility, I am able to analyze source files successfully; no problems there.  When I go to build, all appears to go well until I click the popup that has the message: "The build is finished."  After closing the popup, I get the following warning:
    "Warning: This problem will cause an error when building a deployable image or an installer. The following file(s) were not found:"
    It's followed by a list of dozens of files.  However, I verified that all files are included in the search directories.
    I installed the deployment as-is and it seems to run ok; it finds the files it's supposed to.  However, I'm going to have a hard time selling this procedure off to QA if the deployment shows a 'file not found' message.
    My question is: why do I get the 'file not found' warning during the deployment build process, yet the 'analyze source file' step finishes ok and the deployed files work ok?

      These files are all relative and are part of the workspace.  I did find a
    workaround to the problem.
    In the search directories selection box, the top-level entry is "Current
    sequence file" with subdir search enabled.  The next entry is the workspace
    directory with subdir search enabled; all files are in subdirs of the
    workspace directory.  The remaining entries are unchecked or not
    user-defined (ie.: other NI directories on my computer).  In order for the
    deployment to work, I had to enable the third entry on the list: "Initial
    directory" along with subdir enabled.  However, the initial directory is
    the same as the workspace directory (since I opened teststand by
    double-clicking on my .tsw file).  What I don't understand is why should it
    matter that I have initial directory on the path if it's the same as the
    entry before it?

  • File Not Found error message

    I keep getting this message when I try to view my coldfusion
    page in my web browser. How do I fix this? I've tried saving it
    somewhere else and recreating the file but I still get the message.
    Here is the message:
    The web site you are accessing has experienced an unexpected
    error.
    Please contact the website administrator.
    The following information is meant for the website developer
    for debugging purposes.
    Error Occurred While Processing Request
    File not found: /reviews.cfm
    Resources:
    Check the ColdFusion documentation to verify that you are
    using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.
    Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
    .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
    InfoPath.2; Windows-Media-Player/10.00.00.3990)
    Remote Address 127.0.0.1
    Referrer
    Date/Time 06-Mar-08 12:31 PM
    Stack Trace (click to expand)
    coldfusion.runtime.TemplateNotFoundException: File not found:
    /reviews.cfm
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:89)
    at
    coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
    at
    coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
    at
    coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at
    coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.CfmServlet.service(CfmServlet.java:175)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
    at
    coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
    at
    coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at
    jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    Debugging Information ColdFusion Server Developer
    8,0,0,176276
    Template /reviews.cfm
    Time Stamp 06-Mar-08 12:31 PM
    Locale English (US)
    User Agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
    .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
    InfoPath.2; Windows-Media-Player/10.00.00.3990)
    Remote IP 127.0.0.1
    Host Name localhost
    Execution Time
    No top level page was found.
    Exceptions
    12:31:43.043 - coldfusion.runtime.TemplateNotFoundException -
    in : line -1
    File not found: /reviews.cfm
    Scope Variables
    CGI Variables:
    AUTH_PASSWORD=
    AUTH_TYPE=
    AUTH_USER=
    CERT_COOKIE=
    CERT_FLAGS=
    CERT_ISSUER=
    CERT_KEYSIZE=
    CERT_SECRETKEYSIZE=
    CERT_SERIALNUMBER=
    CERT_SERVER_ISSUER=
    CERT_SERVER_SUBJECT=
    CERT_SUBJECT=
    CF_TEMPLATE_PATH=C:\ColdFusion8\wwwroot\reviews.cfm
    CONTENT_LENGTH=
    CONTENT_TYPE=
    CONTEXT_PATH=
    GATEWAY_INTERFACE=
    HTTPS=
    HTTPS_KEYSIZE=
    HTTPS_SECRETKEYSIZE=
    HTTPS_SERVER_ISSUER=
    HTTPS_SERVER_SUBJECT=
    HTTP_ACCEPT=*/*
    HTTP_ACCEPT_ENCODING=gzip, deflate
    HTTP_ACCEPT_LANGUAGE=en-us
    HTTP_CONNECTION=Keep-Alive
    HTTP_COOKIE=
    HTTP_HOST=localhost:8500
    HTTP_REFERER=
    HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT
    5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
    InfoPath.2; Windows-Media-Player/10.00.00.3990)
    PATH_INFO=
    PATH_TRANSLATED=C:\ColdFusion8\wwwroot\reviews.cfm
    QUERY_STRING=
    REMOTE_ADDR=127.0.0.1
    REMOTE_HOST=localhost
    REMOTE_USER=
    REQUEST_METHOD=GET
    SCRIPT_NAME=/reviews.cfm
    SERVER_NAME=localhost
    SERVER_PORT=8500
    SERVER_PORT_SECURE=0
    SERVER_PROTOCOL=HTTP/1.1
    SERVER_SOFTWARE=
    WEB_SERVER_API=
    Debug Rendering Time: 62 ms

    No CFINCLUDE, unless I'm not seeing it. Here's my code:
    <!--- Get ratings --->
    <cfquery datasource="PFB" name="Ratings">
    SELECT *
    FROM Ratings
    ORDER BY RatingID
    </cfquery>
    <!----get ages----->
    <cfquery datasource="PFB" name="Age">
    SELECT *
    FROM Age
    ORDER BY AgeID
    </cfquery>
    <html>
    <body>
    <cfform action="insertnewreview.cfm">
    <table>
    <tr>
    <td>Age:</td>
    <td> <select name="AgeID">
    <cfoutput query="age">
    <option
    value="#AgeID#">#Age#</option></cfoutput>
    </select>
    </td>
    </tr>
    <tr>
    <td><cfoutput
    query="question">#Question#</cfoutput></td>
    <td><select name="RatingID">
    <cfoutput query="ratings"><option
    value="#RatingID#">#Rating#</option>
    </cfoutput></select></td>
    </tr>
    </table>
    </cfform>
    </body>
    </html>

Maybe you are looking for