"File not found" when double clicking an .ai or .eps file

Hello.
I have Adobe DesignWebPremium_CS6_LS6 ME.
When I double click an illustrator fornat file (.ai .eps .pdf) or right click and open with illustrator - I get the following error: "File not found".
I tried to uninstall and install again - but it's still has this bug.

lee gal,
Presuming nothing is wrong with the file(s) you try (can you open it/them in Acrobat/Reader?), you may try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Similar Messages

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

I cannot click on the menu, the beachball is rotating on my desktop, none of the files appear, and when I click on the Finder, the files are there but inaccessible. All applications open. How do I fix this?

hi there,
try booting into safe mode, by pressing the Shift button once you hear the startup sound.
Hope this helps,
Chris

File not found when clicking public links to share files through Creative Cloud

Only getting File not Found page from links made to share CC filles.
Can see them if I'm logged in but I dont need to share them with myself obviously! So no good for sending / sharing with clients as described in the features?
Please advise because this is maddening.

@aw804 - I am not signed in for links I shared and they are displaying correctly. For example http://adobe.ly/PoBzeB resolves to:
A few questions:
Which OS version and browser version are you using?
Did you create these links recently or some time ago?
Would you share an example link with me via a private message (or reply here if public viewing of the link is ok).

404 File not Found when accessing Video Web server

I am trying to access a Video Web server remotely. Everything works fine on a PC and also on Internet Explorer for Mac.
When I login using Safari I get the error message "404 File not Found" "The requested URL was not found on this server"
I have been successful twice through Safari but after that it doesn't seem to work for days.
I have removed all cookies, emptied the Cache, reset safari, deleted all keychain access references to the website.
It seems to be a security issue but I am not sure what else to do.
Any ideas would be greatly appreciated

Try using open DNS:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)

"File Not Found" When opening a file in illustrator CS3

I having issues where when I click on a file it launches illustrator but then I get prompted with file not found. I then open illustrator and browse to the file and am to open it....any ideas? This one has me stumped.

I think I found the problem. I am using Illustrator CS5 (15.0.02) running on MacOS (10.7.5).
In my script, Folder.selectDialog function was returning "file:///Users/alex/Apps/temp", when I selected the temp folder from the dialog box. I want the function to return "/Users/alex/Apps/temp". If I hardcode the path (as shown below), the javascript runs fine.
// Select the source folder.
//sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files', '~' );
sourceFolder = Folder("/Users/alex/Apps/temp");

Jar file not executing on double-click

Hello,
I have a .jar file that I would really like to execute using a double-click in win xp.
I can execute the jar file witha java -jar command on the command prompt and the program runs but when double-clicking i get the error: cannot find the main class: program will exit
I had win rar installed on my computer which changed itself to the default app to open jar files.
So this is what I've tried
I tried modifying the registry command to run java -jar, javaw -jar but they don't work.
I have created several manifest.mf files with this in them
Manifest-Version: 1.0
Created-By: 1.4.2_07 (Sun Microsystems Inc.)
Main-Class: MyClass
I know that a carraige return needs to be at the end though I don't know really how to check for it (I assume its there because I have a few extra lines after the last text peice). I've read through some other threads but nothing seems to work. It's getting really annoying always having to go through the runline. Thanks for the help.

I don't understand why Netbeans has such a hard time creating working jar's for applications. This is the second time I've written an application that just will not work when trying to execute using the jar. The last time this happened I used Eclipse and imported everything (including the layout) and Eclipse got it working the first time.
This time, I thought I'd go back to Netbeans since they released a newer version 4.0 (I haven't gone to 4.1 yet). Apparently nothing has changed as my application, once again will not run from the jar. What's the deal with Netbeans?
I think I'll, once again bring my project into Eclipse and have that make the jar.
Kurt

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder.<br />
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the <b>browser.cache.disk.enable</b> pref on the <b>about:config</b> page to verify that the disk cache is enabled (should be true).

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
'''File not found '''
Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
* Check the file name for capitalization or other typing errors.
* Check to see if the file was moved, renamed or deleted.
TRY AGAIN.
<nowiki>****************************************************</nowiki><br />
This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
[EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

Thank you for your response, Cor-el.
I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

File Not Found when calling a Servlet in Portal

We've developed a JSP/servlet application within JDeveloper 9.0.3 also using the Portal add-in.
Upon submission of form within the JSP, a servlet is called using a url based servlet mapping. Everything works great in Jdeveloper, but once we deploy to the app server through OEM and try to submit the form on the JSP (through a basic submit button), we get a 404 File Not Found error.
All of the code is set up in the basic j2ee structure. (I think) DrugInter is the name of the provider and the application.
applications/DrugInter/DrugInter/WEB-INF/classes/src/com/whatever/ServletName.class
Our web.xml has the correct servlet name and mapping to this servlet. I'm assuming this is the case only because everything works fine within JDev.
Any ideas?
Thanks!
Teri Kemple

I think I found the problem. I am using Illustrator CS5 (15.0.02) running on MacOS (10.7.5).
In my script, Folder.selectDialog function was returning "file:///Users/alex/Apps/temp", when I selected the temp folder from the dialog box. I want the function to return "/Users/alex/Apps/temp". If I hardcode the path (as shown below), the javascript runs fine.
// Select the source folder.
//sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files', '~' );
sourceFolder = Folder("/Users/alex/Apps/temp");

"File Not Found" when addCourse through iTunesU web service.

I have problem to add Course to my institute's iTunesU site through Web Service.
I was able to get the xml doc back through showTree operation and here is part of it:
<Site>
<Name>my institute's name</Name>
<Handle>123</Handle>
<AggregateFileSize>63057465318</AggregateFileSize>
<Section> <Name>Your Classes</Name>
<Handle>456</Handle>
<AggregateFileSize>57423912007</AggregateFileSize>
<Course>
<Name>course 1</Name>
<Handle>111</Handle>
</Course>
</Section>
<Section>
I was able to get the uploadURL back too. The URL to get the uploadURL request:
https://deimos.apple.com/WebObjects/Core.woa/API/GetUploadURL/myInstitute.edu.45 6?type=XMLControlFile
The uploadURL I got back looks like:
https://deimos2.apple.com/WebObjects/Files.woa/Upload/myInstitute.edu.456/X_1371095208_1a.43c06fa3.467dc4f2/%5Banonymous1371095208%5D/0046e71254900a071aa9241221a469d98ff1ef6fa973544c45ef9 5260dac6c64f05b10aefc
But when I use the uploadURL above and post the addCourse.xml:
<ITunesUDocument>
<AddCourse>
<ParentHandle>456</ParentHandle>
<Course>
<Name>Jing Test iTunesU Web service Course</Name>
<ShortName>Jing Test</ShortName>
</Course>
</AddCourse>
</ITunesUDocument>
The response I got
<error>File Not Found</error> File Not Found
I used myInstitute.edu.456 to get the uploadURL and set it to ParentHandle on addCourse.xml since 456 is the section handler in whoch I want to add the course.
I tried to remove 456 from the myInstitute.edu to get the uploadURL and then use it to add course, got the same error.
Is there something wrong with the URL I used to get the uploadURL?
here is the code and the values pass to the methodI used to send addCourse request:
url = uploadURl on above
name="file"
fileName="file.xml";
data=addCourse xml on above
contentType="text/xml"
public String invokeAction(String url,
String name,
String fileName,
String data,
String contentType) throws MessagingException {
// Send a request to iTunes U and record the response.
StringBuffer response = null;
System.out.println("xml doc: ---" + data);
try {
// Verify that the communication will be over SSL.
if (!url.startsWith("https")) {
throw new MalformedURLException("ITunesUFilePOST.invokeAction(): URL \""
+ url + "\" does not use HTTPS.");
// Build the multipart data.
MimeMultipart multipart = new MimeMultipart();
MultipartFormBuilder.addMultipartFormBody(multipart,
name,
fileName,
data,
contentType);
// Create a connection to the requested iTunes U URL.
HttpURLConnection connection =
(HttpURLConnection) new URL(url).openConnection();
connection.setUseCaches(false);
connection.setDoOutput(true);
connection.setRequestMethod("POST");
connection.setRequestProperty("Content-Type",
"multipart/form-data; boundary="
+ MultipartFormBuilder.getMultipartBoundary(multipart));
String multipartData = MultipartFormBuilder.getMultipartData(multipart);
// Send the multipart data to iTunes U.
connection.connect();
OutputStream output = connection.getOutputStream();
output.write(multipartData.getBytes("UTF-8"));
output.flush();
output.close();
// Read iTunes U's response.
response = new StringBuffer();
InputStream input = connection.getInputStream();
Reader reader = new InputStreamReader(input, "UTF-8");
reader = new BufferedReader(reader);
char[] buffer = new char[16 * 1024];
for (int n = 0; n >= 0;) {
n = reader.read(buffer, 0, buffer.length);
if (n > 0) response.append(buffer, 0, n);
// Clean up.
input.close();
connection.disconnect();
} catch (UnsupportedEncodingException e) {
// ITunes U requires UTF-8 and ASCII encoding support.
throw new java.lang.AssertionError("ITunesUFilePOST.invokeAction(): UTF-8 encoding not supported!");
} catch (IOException e) {
// Report communication problems.
throw new java.lang.AssertionError("ITunesUFilePOST.invokeAction(): I/O Exception " + e);
// Return the response received from iTunes U.
System.out.println("response from ITunesUFilePOST: " + response.toString());
return response.toString();
}

I'm having a similar "File Not Found" error, but it's happening for any API request other than GetUploadURL. I'm sending a POST request to the GetUploadURL, and that part is working correctly, as I get a URL such as the following:
https://deimos2.apple.com/WebObjects/Files.woa/Upload/wvu.edu/X_1372071795_4d9433be.4c3fdd3d.4c3fdd3e/%22Chris%20Scharf%22%20%3Ccbscharf%40mail.wvu.edu%3E%20%28cbscharf%29%20%5B3258 7%5D/0046eaaaf078cf5d6b60f18926106a50a5050cf8f9c91a7608074e6d2949a8759017969ece
Then, I've tried using curl (within 90 seconds) to submit a simple XML document containing a ShowTree request:
<?xml version="1.0" encoding="UTF-8"?>
<ITunesUDocument>
<ShowTree>
<KeyGroup>most</KeyGroup>
</ShowTree>
</ITunesUDocument>
The command executed is "curl -F file=test.xml URL" (where URL is the URL retrieved from GetUploadURL. But I simply get "<error>File Not Found</error>"
I'm correctly sending credentials, since I'm getting upload URLs. And it's not an issue with the XML document, since it's not even getting to the server.

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

"File not found" when double clicking an .ai or .eps file

Similar Messages

Maybe you are looking for