File not opening error code - 2147024873
I'm not able to open the captivate file which was working one hour before. It giving a error saying
1. Insufficient space in hard disk
2. File has damaged etc.
Please let me know how shall i fix it.
Were you working on this file on your local hard drive or over a network?
Similar Messages
-
Error accessing file template file not found (error code 2)
We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
ThanksWe have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks -
PSD File Not Opening - Error When Opening
Hi there! I have been working on this PSD file for a long time... it's a design for my organization's next website.
Now recently I went to open up the file and got this error (images... shows what happens when I click ok at each popup).
I have tried anything I could find online on recovering PSD files and all that, but no luck. Now one thing though that did stand out for me was that when I go to File - Open, the preview of the file when I last edited does show up.
Does this mean there is hope and a way to fix this file? I REALLY need the file up and running.
I would greatly appreciate any help. Also I will be more than happy to send the file to anyone who could repair it for me.
Thanks!Does this mean there is hope and a way to fix this file?
No. If it is a persistent thumbnail in the file, it is a separate data chunk and this does in no way imply that while this partt is intact, other parts would be.
I REALLY need the file up and running.
You know, people use versioning/ incremental saving and backup copies so they can always go one version back and avoid such problems. I just need to look at your file opening dialog and get nightmares. Work files don't belong unorganized on your desktop. They go into an individual folder on a separate partition/ drive and then you save a new version with every siginificant step. I mean, you could have accidentally deleted the file while cleaning up your desktop and then what? Really, you need to work on the fundamentals here and straighten out your workflow. Other than that it's probably more effective to simply re-create the file from scratch instead of wasting time trying to find a fix for something that very likely can't bve fixed at this point...
Mylenium -
?
That's a licensing error. You can read through several possible solutions here. Also, you can download the Adobe Licensing Repair Tool, which is suggested in the first solution.
-
File not found error when tried to open Document ID settings page
Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adilHi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer -
File not found error when opening securedoc.html
We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in. -
Hello
When I try to start the SQl server service i get the following error:
Event id 17058
Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
Thank youHi,
Try running:
SELECT SERVERPROPERTY('ErrorLogFileName')
Then verify that the account being used to run the SQL Server service account has access to the path output above. If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
Thanks,
Andrew Bainbridge
SQL Server DBA
Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you -
Hi guys,
I am working on issue with SQL Server 2008 R2 .. we rebooted the server and after that all SQL services is not coming up. below is the error from eventlog...
SQL Server running under NetworkService account and has full control on this files..
from Config Manager ....
The request failed or the service did not respond in a timely fashion....
From Event log..
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(Access is denied.).
Any idea or workaround..?
Thanks..
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachFinally I found solution and was able to bring back online the SQL Services...
I had a very similar issue with the following error (event log):
Description:
The SQL Server (MSSQLSERVER) service terminated with service-specific error 17058 (0x42A2).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17058
Date: 19/05/2012
Time: 10:20:14
User: N/A
Computer: NSQLXX
Description:
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
Operating system error = 5(error not found).
In this case the ERRORLOG file had been marked as read only. This was following a scheduled automated boot. -This
was culprit
MSSQL wouldn't not start until this file had been changed.
http://www.experts-exchange.com/Database/MS-SQL-Server/Q_23951723.html
Thanks everyone for your kind replies and time...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach -
Error code "File not found Result code = -43" PLEASE HELP!
I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.
So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening? -
Help opening file - file not found error message
When I try to open an excel file that shows up in the finder, excel opens but then I get a "file not found" error message.
Any ideas what is going on?Hi Ceeblee,
SOLVED
How ?? This is a forum for sharing solving problems. So even you solved your own issue it would be helpful for others who read your topic to know how you solved. This could be helpful for future problems for other users.
Thanks ...
Dimaxum -
"Cannot open File Extension. Unknown file extension. Error code: 40003-5"
Good Afternoon Everyone,
I am getting an error message when the user is trying to access the link on their activity.
"Cannot open File Extension. Unknown file extension. Error code: 40003-5"
Can someone help?Please go to administration ->system initilization->general settings> path tab and define all the paths.
i.e you must specify the path of each & every folder from where you are going to open the file.
Hope your problem would be solved
Regards,
ShriX. -
Getting Message as "File not open", when I ran background Job
Hi,
I developed a Migration Program, Which reads the data from Application serever and procced with further process in back ground mode.
Same program is workind fine in Development System in Back ground mode (SY-BATCH = 'X', Scheduled a batch Job). So I transported to Quality system.
Now When I run the program in background mode (SY-BATCH = 'X', Scheduled a batch Job), getting Message as "File is not Open" at Quality system. So I debugged the Batch job through "JDBG", and found file opening and reading the content sucessfully.
But its not working without debugging mode and getting message as "File not open".
Is there any Authorizations required for background mode (without debugging).
So can you please help me on this how to solve this issue.Try this code:
DATA: PATH_NAME(80) TYPE C,
LV_FILENAME TYPE STRING.
DATA: LW_XSTRING TYPE XSTRING,
X_LEN TYPE I.
DATA: FILE_AUTH_ERR TYPE REF TO CX_SY_FILE_AUTHORITY,
FILE_OPEN_ERR TYPE REF TO CX_SY_FILE_OPEN,
FILE_OPEN_MODE_ERR TYPE REF TO CX_SY_FILE_OPEN_MODE,
FILE_CLOSE_ERR TYPE REF TO CX_SY_FILE_CLOSE,
FILE_CONVERSION_ERR TYPE REF TO CX_SY_CONVERSION_CODEPAGE,
FILE_TOO_MANY_ERR TYPE REF TO CX_SY_TOO_MANY_FILES,
MESS TYPE STRING,
W_TEXT TYPE STRING.
DATA: L_RC TYPE INT4.
concatenate pathname lv_filename into lv_filename.
TRY.
OPEN DATASET LV_FILENAME FOR INPUT IN BINARY MODE MESSAGE MESS.
CATCH CX_SY_FILE_OPEN_MODE INTO FILE_OPEN_MODE_ERR.
W_TEXT = FILE_OPEN_MODE_ERR->GET_TEXT( ).
L_RC = 1.
CATCH CX_SY_FILE_AUTHORITY INTO FILE_AUTH_ERR.
W_TEXT = FILE_AUTH_ERR->GET_TEXT( ).
L_RC = 2.
CATCH CX_SY_CONVERSION_CODEPAGE INTO FILE_CONVERSION_ERR.
L_RC = 3.
W_TEXT = FILE_CONVERSION_ERR->GET_TEXT( ).
CATCH CX_SY_TOO_MANY_FILES INTO FILE_TOO_MANY_ERR.
L_RC = 4.
W_TEXT = FILE_TOO_MANY_ERR->GET_TEXT( ).
CATCH CX_SY_FILE_OPEN INTO FILE_OPEN_ERR. "File already open
L_RC = 5.
W_TEXT = FILE_OPEN_ERR->GET_TEXT( ).
ENDTRY.
IF L_RC = 0.
L_RC = SY-SUBRC.
ENDIF.
IF L_RC <> 0 OR SY-SUBRC NE 0.
Issue Error message in open file.
CONCATENATE MESS 'Open dataset failed' w_text INTO MESS SEPARATED BY SPACE.
message Exx(yyy) with mess.
ELSE. "file exists and can be opened
ENDIF. -
File not found error on some computers running the same program
Dim pList As System.Diagnostics.Process
retval = 0
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
System.Disgnostics.Process.Start(PTRName)
pList = System.Diagnostics.Process.GetProcesses
For each proc As System.Diagnostice.Process in pList
If proc.ProcessName = "myprogram" Then
retval = proc.Id
Exit For
End If
Next
If retval > 0 then
'continue
Else
'error message
End If
End If
PTRName = "F:\myprogram.exe"
If My.Computer.FileSystem.FileExists(PTRName) Then
Retval = Shell(PTRName,4)
If Retval > 0 Then
'Continue
Else
'Error message
End If
End IF
I have created a program which:
opens a file
reads the records and massages the records
writes the records to a new file
Launches a program that uses the resultant file.
The program was written on Windows xp MCE using Visual Studio 10. The resulting program works fine.
I places The executable and the input file onto a flashdrive, and then tested it on other machines.
Two of the machines are both Win 7 Pro 64bit with .Net 4. On one machine it works great. On the other I get a "File not found" error when starting the second process. This is the failing code:
The problem is with the Shell command. When I rewrite it as:
it works on both machines
So my question is: Why does exactly the same code (The same flashdrive was used on both machines) work on one machine and not the other (when both machenes appear to be at the same level)?
In both cases I verify the file exists in the correct place before I try to start it.
Any help would be appreciated.
Thanks in advance
JohnThe use of F is just an example. I use:
OutputPath = My.Application.Info.DirectoryPath 'Where app is run from (root)
'Make sure the path ends in \
If VB.Right(OutputPath, 1) <> "\" Then
OutputPath = OutputPath & "\"
End If
to get the correct information.
Then
PTRName = OutputPath & "myprogram.exe"
BTW "myprogram.exe" is not the correct name it is just an example.
Sorry if this caused confusion
However all of this is not the point. If:
My.Computer.FileSystem.FileExists(PTRName)
is true then the file is in the right place. Therefore:
Retval = Shell(PTRName,4)
must also work. However it does not on some machines.
Is the problem in .Net, VB or VS because it is not in my code.
I have also used a routine similar to you (in VB6) to find a particular volume, but used the volume label. That worked better in my case.
John -
We recently upgraded from JBoss 4.2 to JBoss 5.1. Our Crystal reports were working fine in JBoss 4.2, but we've had several issues in 5.1.
after resolving several issues, I have reached a point where the application iis unable to locate the .rpt file. See error below. Here is my configuration:
1. .rpt files in the WEB-INF/classes folder
2. CRConfig.xml - reportLocation tag is removed. It is placed under WEB-INF.
3. My code is as below:
private void init() {
String report = "MyReport.rpt";
IReportSourceFactory2 rptSrcFactory = (IReportSourceFactory2) new JPEReportSourceFactory();
try {
this.reportSource = (IReportSource) rptSrcFactory
.createReportSource(report, l);
} catch (ReportSDKException e) {
log.error(e.getMessage());
e.printStackTrace();
4. My .ear file has the following files in the lib folder:
antlr-runtime.jar
commons-beanutils.jar
drools-api.jar
drools-compiler.jar
drools-core.jar
janino.jar
core.jar
jboss-el.jar
jboss-seam-remoting.jar
jbpm-jpdl.jar
mvel2.jar
richfaces-api-3.2.2.GA.jar
webreporting-jsf.jar
webreporting.jar
CrystalCommon2.jar
CrystalReportsRuntime.jar
jrcerom.jar
logging.jar
keycodeDecoder.jar
commons-configuration-1.2.jar
commons-lang-2.1.jar
5. My .war file has the follwing files in the WEB-INF/lib folder
commons-digester.jar
jboss-seam-debug.jar
jboss-seam-ioc.jar
jboss-seam-ui.jar
jboss-seam-pdf.jar
jboss-seam-excel.jar
jboss-seam-mail.jar
jsf-facelets.jar
richfaces-impl-3.2.2.GA.jar
richfaces-ui-3.2.2.GA.jar
DatabaseConnectors.jar
JDBInterface.jar
QueryBuilder.jar
XMLConnector.jar
com.azalea.ufl.barcode.1.0.jar
commons-collections-3.1.jar
commons-logging.jar
cvom.jar
icu4j.jar
jai_imageio.jar
keycodeDecoder.jar
logging.jar
pfjgraphics.jar
xpp3.jar
mvel2.jar
jxl.jar
jfreechart.jar
jcommon.jar
jboss-el.jar
logging.jar
xpp3.jar
jrcerom.jar
6. Error from server.log
2011-09-15 19:42:07,139 ERROR [com.businessobjects.reports.sdk.JRCCommunicationAdapter] (http-127.0.0.1-8080-1) The report file was not found
2011-09-15 19:42:07,186 ERROR [edu.cmu.heinz.hcis.view.bean.ReportsBean] (http-127.0.0.1-8080-1) Report file ParameterNew.rpt not found
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report file ParameterNew.rpt not found---- Error code:-2147215356 Error code name:fileNotOpened
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.businessobjects.reports.sdk.JRCAdapterSDKException.a(SourceFile:92)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2299)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:275)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
2011-09-15 19:42:07,186 ERROR [STDERR] (http-127.0.0.1-8080-1) at com.
Where is the Java Reporting Component looking for the files?
Thanks.Help me ...
Ambient:
Crystal Reports Viewer 14.0.0.0
java.vendor = Sun Microsystems Inc.
java.version = 1.6.0_37
os.name = Windows NT (unknown)
os.version = 6.2
os.arch = amd64
Exception:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects.sdk.erom.jrc.ReportAgentFactory---- Error code:-2147215357 [CRSDK00000026] Error code name:internal
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(ReportSDKException.java:112)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.createDefaultAgent(RemoteAgent.java:1000)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.initRemoteAgent(ClientDocument.java:770)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(ClientDocument.java:961)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.open(ReportClientDocument.java:226)
at src.HelloWorldSwing.createAndShowGUI(HelloWorldSwing.java:54)
at src.HelloWorldSwing.main(HelloWorldSwing.java:24)
Source:
import java.awt.BorderLayout;
import javax.swing.JFrame;
import com.crystaldecisions.ReportViewer.ReportViewerBean;
import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
import com.crystaldecisions.sdk.occa.report.application.OpenReportOptions;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.IConnectionInfo;
import com.crystaldecisions.sdk.occa.report.reportsource.IReportSource;
public class HelloWorldSwing {
* @param args
public static void main(String[] args) {
HelloWorldSwing pgm = new HelloWorldSwing();
try {
pgm.createAndShowGUI();
} catch (Exception e) {
e.printStackTrace();
//JOptionPane.showMessageDialog(null, e.toString());
* @throws Exception
public void createAndShowGUI() throws Exception {
// Make sure we have nice window decorations.
JFrame.setDefaultLookAndFeelDecorated(false);
// Create and set up the window.
JFrame frame = new JFrame("HelloWorldSwing");
frame.setTitle("Titolo del Report");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
ReportViewerBean viewer = new ReportViewerBean();
viewer.init(new String[0], null, null, null);
ReportClientDocument rpt = new ReportClientDocument();
rpt.setReportAppServer(ReportClientDocument.inprocConnectionString); // inproc:jrc
rpt.open("Report.rpt", OpenReportOptions._openAsReadOnly);
IReportSource rptSource = rpt.getReportSource();
viewer.setReportSource(rptSource);
frame.getContentPane().add(viewer, BorderLayout.CENTER);
frame.setSize(1930, 1030);
frame.setVisible(true);
viewer.start(); -
File Not Found Error running JSP demos
I'm not sure what is going on, but it appears that every time I try to run a jsp, the server looks in the document root where it errors out with a file not found error. I've seen others with this type of problem but I haven't seen a solution. Anyone have any ideas?
Thanks.1: Double check the port number that your Tomcat Server is using. (TOMCAT_HOME/conf/server.xml).
2: check you IP. This is not the 'localhost' IP (not sure if it is LAN or real IP). So it may change dynamically.
3: Check for Firewalls. Also, since you are not using localhost, you will have to make sure you traverse all the firewalls built around your system. If you have a router (home), windows XP, or some other firewall, make sure the appropriate ports are opened. If you are behind a corporate firewall, or your ISP closes ports... your kinda out of luck until you find a way to cheat around them.
2: Try just using just "/ValidateUser.jsp" as long as it is one the same domain as the Form. This will make it less likely to break, should your IP change.
Maybe you are looking for
-
Nomad Jukebox Zen NX Durability--W
I have a Nomad Jukebox Zen NX 20 Gig player and it has served me well. But heres a testimony to that claim that is unsurpassed in my mind-- I have a radio in my bathroom that i listen to when i'm getting ready, so i brought my player in with my radio
-
Why can't I see any of my ichat buddies when I log on?
When I log onto ichat, I cant see any of my buddies or add anyone to my list. My buddy list is just blank, and sometimes theres one name on there and when I add a buddy that name starts flashing but then nothing happens. However, I can hear the buddi
-
How to generate .fmt file
-
Ip phone and pc VLAN security issue - ISE 1.0
Hello there. We are about to implement IP phones to our current network and during testing I have found 2 issues. 1- ip phone connects to a protected port using ISE mab authentication for the data network. The voice VLAN is set up static on the port.
-
Open the Reader with the same instance
Hello, we need the possibillity to open different PDF files in the same Window. We use A-Reader XI