FIle not picked up by File Adapter

Dear all,
File adapeter is not picking the files from the source directory by the PI system.
We could see that the files are available in the source system, kindly suggest me in this regard.
Thanks for the support.
Best Regards,
Piyush

apart from the above options you can try some of the below:
1. STOP and RESTART the channel. since some time the file chanel becomes isolated and the handshaking doesn't happen properly.
2. you should always give a "time out" in the sender channel.
3. check the folder RIGHTS, you can try making it 777 (full READ,WRITE and EXECUTE) for the time being. Later you can customize
    your rights as per the requirement.
Edited by: SANJAY BADHAI on Nov 24, 2010 3:41 PM

Similar Messages

  • Xi server not picking up the file

    Hi,
    My Scenario is flat file to xml.I have declared all the file content conversion parameters and placed the input file in server.But the thing is XI server is not picking up the file.What could be the error.Does any error in content conversion has to do with XI-Server not picking up the file.
    Thanks,
    Srinadh

    Hi Bhargav,
    go to SXMB_IFR -> Runtime Workbench -> component monitoring -> adapter engine -> adapter engine monitoring or to communication channel monitoring to see the error in your sender file adapter..........rectify this error in comm channel in ID.......set filemode to delete..........then activate yur comm channel.........then your source file will  be picked by XI........
    Thanks,
    Rajeev Gupta

  • Import Server not picking up the file

    Hello,
    I have 2 repositories running on the same server. Import server picks up file for one repository, but not for the other. What could be the reason? Also, for the repository, import server not picking up the file, workflow also does not send an email notification.
    Please help
    Subhash

    Hi Subhash,
    Hope you are not using the same Import Server for both the MDM Servers. If yes then you need to mention the MDM Sevrer name in the MDM Server parameter of MDIS.ini. Check the parameter list of MDIS.ini file.
    If your repository has password for Admin user then you need to specify the same in MDIS.ini file under your repository section for User = Admin and Passowrd = [Admin password]. Remove the E from the PAsswordE and give the password for Admin user. Once done restart the Import Server and check again, parameter Password would have converted to PasswordE.
    For Email Notification two things you need to check:
    1. You should have specified the mail server address in MDS.ini file under your repository section for parameter Mail Server.
    2. Workflow owner should have entry in Email address field of the user. Check this in Console under Admin -> Users.
    Regards,
    Jitesh Talreja

  • Weblogic Server not picking the jar files in WEB-INF/lib folder

    we are facing a strange problem where Weblogic App Server is not picking the jar files present inside the WEB-INF/lib folder if we update the jar file path in the classpath of the start script then the classes get loaded properly.
    Is there any specific setting which I need to do in weblogic to pick these jars ?

    Class loaders associated with a Web application can be configured to locate local classes first. To enable this we have to set the <prefer-web-inf-classes> to true in the deployment override weblogic.xml, for example
    <container-descriptor>
    <prefer-web-inf-classes>true</prefer-web-inf-classes>
    </container-descriptor>
    http://blog.transfer-solutions.com/2010/12/weblogic-class-loading/

  • [svn:fx-trunk] 13687: Add in osmf and flash-integration localized files not picked up in the previous commit  (13686)

    Revision: 13687
    Revision: 13687
    Author:   [email protected]
    Date:     2010-01-21 07:25:58 -0800 (Thu, 21 Jan 2010)
    Log Message:
    Add in osmf and flash-integration localized files not picked up in the previous commit (13686)
    Added Paths:
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/de_DE/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/fr_FR/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ja_JP/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/ru_RU/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/docs/
        flex/sdk/trunk/frameworks/projects/flash-integration/bundles/zh_CN/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/de_DE/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/fr_FR/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ja_JP/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/ru_RU/docs/packages.dita
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/org.osmf.media.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/org.osmf.net.xml
        flex/sdk/trunk/frameworks/projects/osmf/bundles/zh_CN/docs/packages.dita

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • Stranger error:Old file not found.However,a file of the same name was found

    Hi All,
    I appologise if its not the right forum...
    I am a bit baffeled here by the following error when I am trying to install Java SDK or just JRE.
    I upgraded my windows 2000 box to win XP home edition, installed the latest updates etc and then tried to install java....
    and got the following error
    bin\appletviewer.exe:
    Old file not found.However, a file of the same name was found.No updates done since file contents does not match.
    I have removed everything from system that I could imagine might be using Java directly or indirectly. No JRE on the system, no old java folder under C: drive etc, But I still get the same error. I have never come accross a stupid error like this before. Any help will be appreciated. Thanks
    Message was edited by:
    Khalid.Ali

    hunmm..thanks for the reply, I will try to find appletviewer.exe, however, my guess is that file should be there cus I am just trying to install it from standard java SDK installation.
    Yes I did not do checkdisk and I will do that and post my findings

  • Encode Video Files not working for avi files

    Hi,
    I've been trying to convert some .avi files to apple format using Lion's native 'Encode video files' function however keep getting a 'avconvert: source file not found for source file://fileparthhere avconvert: failed to create an export session. Check setup
    I can't work out why as this has worked before in Lion and works fine for other video formats. The only thing I've done is remove Final Cut Express HD and can't add it again as I don't own it anymore
    Suggestions? Is there a encoder to make this work or should it work anyway?
    Thanks

    If you click Yes the project file will be updated when you save it. That has nothing to do with the media.
    Are the Lesson and Media folders still in the Book Files folder (or whatever it's called)?
    Select one of the clips in the browser and use Edit>Item Properties. One of the first lines is Source. That gives you the file path for where your media is supposed to be located. What does it say? If nothing is there, use the File>Reconnect function and point the application to where the media is located.

  • Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Hey Podieboy,
    Thanks for the question. It sounds like you are receiving a message about missing files when you start iTunes. The following resource may provide more information:
    iTunes: Finding lost media and downloads - Apple Support
    http://support.apple.com/en-us/TS1408
    If the file/song is not important, you can simply delete it from your library to avoid this error message in the future:
    iTunes 12 for Windows: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH20391
    Thanks,
    Matt M.

  • File to Idoc - File not picked up

    Hi experts,
                   In the file to idoc scenario when i post a file in the file server it is not picked up by the file adapter. But in the communication channel monotoring it reports <b>'Process finished sucessfully'</b>.
    Help me out in this issue.
    Regards
    Santhosh Kumar V

    HI Santhosh
    if you are using NW latest version.check in Communication channel monitoring
    otherwise in Adapter monitoring.
    Check u r Sender Communication channel working or not... in RWB->Component monitoring->Communication channel monitoring..
    in which color it is displaying u r Sender Communication channel?? If it is in RED color then u r sender cc is error one.
    Check the following:
    1. Name of the input file and the filename in communication channel should match.
    2. The communcation channel is activated
    3. The folder path is correct.
    4. The Processing mode is "Delete"
    5. XI server is up when u try the scenario
    6. The adapter has status green in RWB Adapter Monitoring
    7. Sender Agreement is properly configured
    As explained above
    See ,,
    --Check the FTP server details
    --Check the User.pwd and authorisations -- to read file,
    --Check the File name sapecified in sender CC, and check the file i spicked by CC or not in RWB channelmonitorservlet
    by http://host:port/mdt/channelmonitorservlet
    --Also see the below links
    /people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
    OS Command on FTP
    OS command line script - Need help
    FTP - Run OS Command before file processing
    /people/sravya.talanki2/blog/2005/08/23/sender-xi-ftp-adapter-with-regular-path-expression-150-abap - Sender XI FTP Adapter with Regular Path Expression – ABAP
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • File not picked up strange problem

    Hi all,
    I am doing File to file tranfer .
    my source dir is AL11 and i am ftp the file to reciver system .
    I am encountering strange problem .
    Some times my file adapter pick the file  and tranfer the files sucessfull  and sometimes  it does not pick the file . i trying to pick same files always  i.e *.txt
    in RWB cc it show no error . it gives message  polling sucess but no message id in it .
    i tried to deacitve and active the adapter , but it is of no use .
    if anyone  faced this type of problem please reply
    Thanks

    Hi,
    Some times file adapter will not pick the file it will be strange u cant find any error regarding it..........i thnik u have proper authorization for AL11 because file adapter is picking the file...
    check the processing parameters what is the mode of trasfer is it test or delete.....
    better to have NFS at both the ends or take NFS at sender side...
    Regards,
    Phani

  • Attachment file not picked - File to Mail scenario

    Hi,
    I'm just trying out the file to mail scenario as suggested in blog:
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
    I created a xml file as the main mail content(main.xml). And I also have an attachment file(txt) placed at the same location. The file adapter picks the mail.xml, but not the attachment txt file. I can see the mail in my inbox, with the mail.xml added as an attachment..
    I have added the "additional files" in the File adapter configuration. Also in mail adapter configuration, I have checked "Keep attachments"
    Are there any other configurations I'm missing out???
    When I check in XI ABAP engine, sxmb_moni, I see the following error:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_Mail_MM_</SAP:P1>
      <SAP:P2>java.lang.NullPointerException</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_Mail_MM_:</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Hi,
    Thanks for the quick response...
    Prateek,
    the mapping is fine in IR.
    Sanjeev,
    Making the optional parameter created a failure in the communication channel.
    the error the file sender returns in XI runtime workbench is
    "Error: java.lang.Exception: Add attachment: Mandatory additional payload file 'main.txt' not found!" though my attachment name is  "Attachment.txt" . I renamed the attachment file to "main.txt", and made necessary changes in Additional file configurations too...
    I have the attachment in the same location as the main content xml file. Should I specify somewhere the location of my attachment file too?
    Gabriel,
    Very useful link. but I dont see the failure in sxmb_moni now, may be because the failure occurs at the Communication Channel level itself????
    -Ajitha

  • Why the file not picked by PI

    Hi mates:
           I tried to implement a XML-to-XML senario by XI, it is like picking the file from one folder to another .  and I have created and configurated everything for senario in ID and IR. and activated everything. but the file won't be picked up by XI, 
          I used two computers for the senario, one for Xi, one for the business system.
          Could you please tell me why the file can't be picked up by XI. do I have to installed any FTP server
    on the business system?
          Thank you very much!

    Hi Jingying,
                  There is some reasons are happended for the file is not picking.
    1) If use FTP , Check your FTP Connection working or not
    2)If not pick the file to XI , Check data from source end, if it wrong its shows the error in RWB->Communication Channel Monitoring--> File adapter..
    3)Check the sender Communication channel configured properly or not.
    Regards,
    Sateesh N.

  • File not picking up in FTP server

    Hi SAP-XI experts,
    2 different files are send to same FTP server but one file was picked but other was not picking.
    Error that came while monitoring CC is as below:
    "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration / structure 'row.': More elements in file csv structure than field names specified!".
    Seeing the error we cross check the content of file present at FTP server. But everything was fine,it contain same no.of fields present in Content conversion and even same length.
    Solution: I added a extra row in Content conversion "row.additionalLastFields   ignore".After that i stop and restart the Communication channel it start picking the file but the Communication channel is still in red.
    Can u please tell me ASAP the reason why the file was not picked first and then after adding extra row it started picking.
    Thanks & Regards
    Vijji

    Hi,
       it is related to some problem with the data only...because i too faced the same issue...i was also not able to see the new line when i try to open the same in notepad++ ... may be some other paramters or data of excel/CSV which is avoiding to display the same..in notepad++
    also try one more thing...enable the new line characters and see if there is any difference...between the processes and failed files...
    HTH
    Rajesh

  • EDI  X12 scenario,deq.bat file not generating any trace file.

    hello,
    i have worked on the EDI X12 over internet(AS2) Transaction,everything is working fine until the creation and deployment of configurations on both Acme and GlobalChips servers.But During the Verification of Purchase Order Transactions when i am running deq.bat file on both Acme and GlobalChips servers the dq script is not generating any t1.trc trace file.
    There is no problem with the Trading Partners on both servers they are on upstate,can anyone help me with this issue please,its very urgent.
    note: where will be the web.xml file for transportServlet located,can anyone provide me with the file path.
    thnx
    sunny

    Hello Sinkar,
    Thanks for your reply,Finally i have managed resolve the issue(deq.bat file is generating t1.trc file) successfully.But there are certain other issues regarding this topic in which i need your help.
    When i am running the deq.bat file in command prompt on both acme and globalchips servers it is showing the following status
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;deq.bat
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;java oracle.tip.adapter.b2b.data.IPDeq
    ueue ipdequeue.properties
    IPDequeue start...
    Dequeue from IP_IN_QUEUE
    and it also generated a t1.trc file on both servers,but the prompt in which i have run deq.bat is not giving any further message
    i.e some thing like IPDequeue end.
    and not even coming back to the original path i.e
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;
    and even if close the prompt it is not showing anything in t1.trc file and if i am running the enq_850.bat in acme server it is showing following stat
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;enq_850.bat
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;java oracle.tip.adapter.b2b.data.IPEnq
    ueue enq_850.properties
    IPEnqueue start...
    IPEnqueue end.
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;
    and its didn't showing anything in the t1.trc file generated on the globalchips server and same thing is happening when i am running enq_855.bat file on the globalchips server its not showing up anything in the trace file generated on the acme server.
    I have tried one thing that u have suggested for such kind of issue(t1.trc empty) in your forums
    1.) I have applied the patch #6673231 and it is showing the Document Routing Id Field in the B2B UI,but when i am completing all the process in B2B UI and running deq.bat file the result is still the same,the IPDequeue is not ending
    But a certain change has taken place after applying the pat
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;java oracle.tip.adapter.b2b.data.IPEnq+
    ueue enq_850.properties+
    IPEnqueue start...+
    Action Name = null
    IPEnqueue end.+
    D:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;+
    C:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;enq_855.bat+
    C:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;java oracle.tip.adapter.b2b.data.IPEnq+
    ueue enq_855.properties+
    IPEnqueue start...+
    Action Name = null
    IPEnqueue end.+
    C:\oracle\OraJ2EE\ip\tutorial\X12\runtime&gt;+
    I Think that no action is taking place in both the cases
    bcoz its showing this Action Name = null+
    if that is the case what is the problem here
    I have also set oracle.tip.adapter.b2b.DocumentRouting=true.
    but the situation is still the same,please read the above problem carefully and suggest a solution which would be fruitful for my further progress.
    thanks
    sunny
    Edited by: user10470973 on Dec 16, 2008 10:43 AM
    Edited by: user10470973 on Dec 16, 2008 10:44 AM

Maybe you are looking for

  • Calling mysql-procedure from labview

    Hi All I am using Mysql for my labview application. I have to use procedure.I successfully used procedures without parameters by calling the procedure using DB tools execute query. But i have to use paramatrised procedures also .That is i have to pas

  • Error exporting MAX Task to file

    Hello I would like to export NI Task to file. However, I am getting this error  Error -2147220444 occurred at nisyscfg.lvlib:Import.vi: Under the Possible errors, i get this message: Possible reason(s): NI System Configuration: (Hex 0x80040424) The o

  • How to format html output of a servlet

    Hello. My servlet/JSP is processed by custom tags and XSL Translation. After all its HTML output looks not formatted. How to format it? It is possible in a standard way (using a web.xml'd directive)? What roughly I want: <html>   <body>   <body> <htm

  • Elements 13 will not open slideshows from Elements 11

    Upgraded to Photoshop/Premiere Elements 13 and when I try to open slide shows created in Elements 11 and edit them I get a message "Please select some media." Slideshows still open and work in Elements 11.  Thanks

  • Inivitation link for collaboration room fails

    Hi, I installed a SAP Netweaver Portal 7.0 (SP18) with KM & Collaboration. The URL of a added collaboration room is: /irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/<roomid>/workset If I try to