File numbers change after exporting

When I edited my pics and then exported them to a CD the file numbers change so that when I look at wedding pics, I see the reception with the rehearsal pics. I still have the right numbers attached to the master file in the backup section of my hard drive. Did I do something to change the data?

You probably renamed them on export. It's an option in the export dialog.

Similar Messages

Color change after exporting from Lightroom

I noticed a drastic color change after exporting a file from Lightroom to a JPEG file today. I have been using Lightroom for a while, and it never happened before. I am assuming that I changed the setting somehow and I cannot find how to fix it.
Here is the original.
After exporting to a JPEG. The color is so drastically different. I tried both sRGB and AdobeRGB and they turn out to have the same problem.
It is not as clear as JPEG files, but edited files with Photoshop CS5 also looks slightly different viewed on Lightroom.
I would appreciate it if anyone could help me. Thank you so much for your help!

Thanks everyone for looking into my problem!
>Can you upload a sample of each
>* Raw File
>* XMP Sidecar
>* Exported JPEG
I somehow can't find XMP sidecar files in my folders.... So instead, I exported the JPEG file to the 2nd JPEG file, hoping you can compare those two JPEG files.
The colors get lighter and lighter every time I export the files. I uploaded those files (RAW, 1st JPEG, 2nd JPEG) on line. I also changed the file samples from the original post because I can't add watermarks.
I checked my flles, but there is no preset applied to the JPEGs.
I am thinking of unistallng Lightroom and reinstalling it and see what happens.
Thanks!
1. The data of the RAW file: http://yuko-hirao-photo.hechtmail.com/others/DSC00530.ARW
2. Data of the GPEG exported from the RAW: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01.jpg
3. Data of the JPEG exported from above JPEG: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01test_upload_01.jpg

Set word file read only after exporting through mail merge

Hello,
I am exporting the ALV report to word file using standard functionality using mail merge.
But my requirement is after exporting to word ,file should be protected or read only.
Plz Help me to solve this issue.
Thanks,
Paresh.

you can do that by calling class method CL_GUI_FRONTEND_SERVICES=>FILE_SET_ATTRIBUTES exporting parameter READONLY
note: this will work only in the foreground, it is not possible to do it in a background job

CS5 indd files occasionally change after saving and reopening

Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?

There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Why is the color changed after export?

Hi
The colors of my movie change after i export them.
I tried to find the anser on all kind of forums but i believe i'm the only one with this problem.
My settup:
Mac 24GB 1333MHz DDR3
Eizo CG221

Here are some screenshots.
I've made no color correction.
If you look at the preview, you see it's saturated and the colors are off. And after the export it's back to the origanal colors.
Here are some more specs:
Footage: Proress 422
Sequence settings:

Word file ownership changes after edit/save.

This may be a server issue more than Office, but I've come across some articles relating to this problem in Samba, and thought it might be similar.
I'm the Network Admin for a school district. We have a file server that is setup with a file and folder structure that allows students and teachers to access and share documents. One teacher came to me with a problem. Students are able
to create and save Word documents to an assignment folder. The teacher then goes into the document, makes changes and enters notes, then saves the document back to the folder, overwriting the original. The problem is that once she has done so,
the student can no longer access the document.
After investigation and testing, I've found that ownership of the file is changing from the student to the teacher. This is a problem based on the way that the ACL is set on the folder. The students' access is based in the creator/owner attribute.
The fact that the ownership is changing once the teacher opens and edits the document is causing the student to no longer have access to the file.
My question is, is there a setting or other change that can be made to Office so that ownership is not transferred to the teacher? Giving each user explicit rights to each file and/or folder isn't really an option when I have 3000 students to
deal with. Again, this may be a server side issue, but I've not seen this problem with other programs.

I'm picking this up because I have the exact same problem.
Students are given Write access to a folder (So they can save their work)
Teachers are given Modify acccess to a folder (so they can add comments, etc)
CREATOR/OWNER is given Read/Execute so students could read teacher comments, but not make changes to the document once it has been saved.
When I test it with my admin account, it works great. I can update the document and the student can open it to see my comments, but not change the document anymore without saving to a different location.
When I test it with a teacher account, the document changes ownership as soon as the teacher saves. Once the ownership changes, the student no longer has permissions through CREATOR/OWNER and they can't open the document to see the comments anymore.
I can't see why this works when my account makes the changes, but not when a teacher account does. We are doing the exact same things in Word.
Here is an example of the permsions as they exist on a sample document. In the example, my admin account (which works fine) gets it's permissions through BUILTIN\Administrators:
PS H:\> $acl = get-acl "L:\TeacherShare\S2 3(A) Study Hall - Half Year\Submissions\StudentWork.docx
PS H:\> $acl.access
FileSystemRights : ReadAndExecute, Synchronize
AccessControlType : Allow
IdentityReference : SCHOOL\StudentAccount
IsInherited : True
InheritanceFlags : None
PropagationFlags : None
FileSystemRights : Modify, Synchronize
AccessControlType : Allow
IdentityReference : LPS\TeacherAccount
IsInherited : True
InheritanceFlags : None
PropagationFlags : None
FileSystemRights : ReadAndExecute, Synchronize
AccessControlType : Allow
IdentityReference : LPS\School Principals
IsInherited : True
InheritanceFlags : None
PropagationFlags : None
FileSystemRights : ReadAndExecute, Synchronize
AccessControlType : Allow
IdentityReference : LPS\School Document Administrators
IsInherited : True
InheritanceFlags : None
PropagationFlags : None
FileSystemRights : FullControl
AccessControlType : Allow
IdentityReference : BUILTIN\Administrators
IsInherited : True
InheritanceFlags : None
PropagationFlags : None

Photo quality change after exporting

Hello
I'm working on a short film project that should be made from photos not videos (so photos are critical in this iMovie project), but after exporting the movie ( in HD) I found out that the photos' quality were reduced?
Most of the photos are darky, with dark backgrounds, they look good enough in iMovie but after exporting they look lighted up, which ruins my movie.
What should I do??
Thanks in advance

That is odd, I have not been aware of any drop in camera quality via an update with this model. With this being the case I would advise running the update again and choosing the "Repair" option.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Export Document to PNG file. Change default export settings.

Hi All,
In my plugin I need to export active document to png file with specific options. And sometimes I need to export definite pages from the document, but not all.
In standard UI of InDesign there are several basic steps of export:
1."File"->"Export";
2. Choose the location and filename to export to;
3. Customize export options.
In my plugin I need to have the possibility to set options from 2 and 3 steps.
I have found out that there are some bosses, which deal with PNG:
kPNGErrorStringServiceBoss
kPNGExportCommandBoss
kPNGExportPrefsScriptProviderBoss
kPNGExportProviderBoss
kPNGExportSetPrefsCommandBoss
kPNGExportUIDialogBoss
kPNGFilterConversionBoss
kPNGIconButtonWidgetBoss
kPNGImageReadFormatBoss
kPNGImageWriteFormatBoss
kPNGPrefsDialogBoss
Also, there are some interfaces and widget id's in the following headers "PNGFilterUIID.h", "PNGPrefsUIID.h", "PNGFilterID.h", which deal with png export process.
One of the ways to solve my problem is to create png export dialog (maybe IDialogMgr::CreateNewDialog), iterate over all widgets and set necessary values, but I don't know how to create this ExportDialog.
Any ideas how to solve this are of great value.
Thanks in advance.

I have already tried this method from the SDK example:
    // Load the plug-in's resource.
        PMLocaleId nLocale = LocaleSetting::GetLocale();
        RsrcSpec dialogSpec
            nLocale,                    // Locale index from PMLocaleIDs.h.
            kBscDlgPluginID,            // Our Plug-in ID from BasicDialogID.h.
            kViewRsrcType,                // This is the kViewRsrcType.
            kSDKDefDialogResourceID,    // Resource ID for our dialog.
            kTrue                        // Initially visible.
        // CreateNewDialog takes the dialogSpec created above, and also
        // the type of dialog being created (kMovableModal).
        IDialog* dialog = dialogMgr->CreateNewDialog(dialogSpec, IDialog::kMovableModal);
        if (dialog == nil)
            ASSERT_FAIL("BscDlgActionComponent::DoDialog: can't create dialog");
            break;
When I use kSDKDefDialogResourceID, it creates dialog, which was defined in my plugin resource file not a standard export dialog
What shoul I use instead kBscDlgPluginID and kSDKDefDialogResourceID?

JPG files become corrupt after Exporting in LR 3

Does anyone have any idea what would cause
my JPG files to be corrupt after I export my edited Raw images in LR3? There are no problems with the Raw file, but once I edit them, apply what ever settings to them in LR I need, I export them as JPG to the same hard drive but in a sub folder where the raw files are, they will not open in photoshop or anywhere else. They are corrupt or lacking data???? When I upload them to my proofing website, there are colored streaks all through the image. Now, I noticed that when I go into that folder of RAW images, and delete the .xmp files, I have to start over, but it fixes the problem. So, now, I can't use .xmp sidecar files to save my editing. I'm fairly new to LR, so any suggestions would be great. I did recently upgrade my system to OS windows 7. Everythign was fine till I had to reinstall everything on my computer...and I also changed hard drives. I upgraded to a Terabyte drive moving all my images from a 500G to the terabyte. Could that cause my sidecar files to be corrupted?????
Thank you!!!!!

I doubt that the XMP files have anything to do with this, as Lightroom doesn't use these files when it creates an exported file.
It sounds like your hardware may be the culprit; these types of corrupt files are often caused by a failing hard drive. Some corruption may have happened in the transfer from one hard drive to another; or the new hard drive has some sort of problem.
Can you hook up the old hard drive again and see what happens to the photos there? Open one of them and compare it to the photo on the new hard drive.

Question - Histogram changes after export?

When I export to a jpeg file from Lightroom, whether I choose sRGB or ProPhotoRGB, often but not always, the histogram changes dramatically.
In the worst cases, pictures that looked good and were well balanced are suddenly over-exposed with blown highlights (and I'm not talking fractions!)
Can anyone explain why this should happen and what is the best way of controlling results as I send the shots to magazines for publication?
p.s. I have just discovered that if I export to a Tiff file first, then export that Tiff to a jpeg, all in sRGB, it works and the histogram is barely altered. This has to be a bug, surely?

My comment was not directed at anyone particularly, but rather at Adobe.
I am tired and weary, after having paid thousands of pounds for their products to have absolutely no sensible recourse to help.
Their FAQ section is a joke and, like so many large companies that charge very high prices for their products, they abrogate responsibility and leave it to members of forums to provide the answers.
Indeed, it is something of a miracle to even arrive at anything approaching relevant in this area as their search engine seems to throw up just a very few and mostly obsure results when used. I entered 'altered histogram' and got a sum total of 14 hits, none of which were remotely appropriate. This, I have to say, is far from a new experience for me either, which begs me to ask just how unique is it to process RAW Sony files and convert to JPEG? That's all I do!
Certainly, I do admire those who are willing to offer their help freely. You, presumably, are one such individual.
Unfortunately, when all I want to do is work hard and earn a little money, to find software behaving inexplicably and then discover that I seem to be the only person in the whole wide world ever to have seen this effect, despite the millions of others doing pretty much exactly the same thing, I find it very hard to be bouyant and positive.
To get back to the issue at hand, I understand the basic mechanics of colour space (including the understandable but limiting fixation with ProphotoRGB in Lightroom).
It would, however, appear that I have now resolved the issue myself by reinstalling just about everything. Of course, I will likely never discover the cause, so pity the next individual who has been overcharged by Adobe and finds themselves in the same boat, when the only solution is a few hours of uninstalling, cleaning registries, reinstalling, etc.

File size changes after importing photos

Quick question here. I've been using iphoto (now using iphoto 8)for a couple years and just noticed that after importing photos (I use a variety of original formats, usually jpeg or raw) the file size in iphoto is a lot smaller than the original (roughly half). First of all, why is this? Is there any way for iphoto to retain the original size? If I try copying a photo out of iphoto, say onto my desktop, the file size remains the same as it was in iphoto. In other words, it doesn't revert back to the original.
Any idea as to why it would do this?
Some help would be much appreciated.
Ads

Welcome to the Apple Discussions. When a raw file is imported iPhoto creates a jpg version so if you're looking at that and comparing to the size of the raw file, yes it will be smaller.
If you edit a photo the resulting file will be slightly smaller since there will be one level of jpeg compression added to the file. All subsequent edits will not cause any more compression because the edit instructions are saved in the database file and applied to the file for viewing, printing and exporting. That's why iPhoto calls it nondestructive editing.
If the photo is portrait oriented and comes from a camera which has the auto-rotate feature iPhoto will create a rotated version and that will contain some jpeg compression.
Dragging the photo to the desktop will bring the edited version which will be smaller. To get the original file export using the Format=Original setting as Larry has already pointed out.
If you're worried about image quality unless you will be printing a very large photo you'll be hard pressed to see any degradation in the image.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Font Changes after export

Hi there,
   am going with a small problem here,
   in my report am displaying some HINDI fonts which is displayed perfectly during the report load, but when i export it to PDF and WORD formats the font is changing to square boxes,
   but its coming fine when i export it into excel file....
can anybody get me some solution for this
any help will be greatly appreciated
Regards
Nayeem.....

Hi Nayeem,
You need to use a UNICODE font and one that is not Licensed, CR will not embed licensed fonts into PDF files. Odd that it doesn't work in Word though.
Not sure what OS you are using but in XP go into Control Panel, Regional and Language Options and click on the Advanced tab and check on the option to Apply all setting to.... in the default user account area. Then go to the Languages tab and check on the option to Install Files for east asian languages. We have a dependency on that option as of R2. It adds about 10 meg of files so you'll need your Windows CD.
Thank you
Don

[SOLVED] Permission for a file is changing after reboot

I know it may seem to you like a silly question, but it's a terrible problem for me. I tried to change permission for a file using chmod 660 and it changed of course ( I did it as a root ), but after reboot it resumed to the previous state. It's rather critical file form /proc/acpi/video/... and I need it for brightness manipulation. It's a file with a direct access to my hardware, so I think there's somewhere protection mechanism in Arch and I don't know what should I change.
Thanks in advance
Last edited by Gooru (2010-10-25 17:43:03)

Although this works, surely changing the permissions on every boot is a little backwards.
As far as I'm aware it's permissions are set like that for a reason - it's a hardware control and as such should only be touched with privileged permissions (root). The 'real' way to do this would probably be to use sudo and set up the sudoers file such that you don't need to use a password as a regular user.
That's just my two cents though... and if I'm honest, it's just me being really pedantic you can do it how you like!

IMovie sound quality changes after export and is terrible

when i export my imovie the sound quality becomes bad and sounds like my speakers are blown but their not, it sounds perfectly fine in imovie but after its exported it changes to worse, anyone know how to fix this?

Check your audio levels. and if necessary, reduce the levels so that the audio stays under the 0 DB line. If you have audio that is yellow or red, reduce the level. This video shows an example of how to do this. Click on the video All New Audio Editing."
http://www.apple.com/ilife/video-showcase/

PDF files turns white after exporting from InDesign CS5

Hi all
When I export PDF files fom inDesign CS5 they turn out all white when I open them in Acrobat Reader (I´ve tried both in version 9 and the latest version). When I first open the PDF it seems to be ok but as soon as I zoom out it turns white. Anyone have a clue or have experienced the same issues?
Thanks a lot
/warpig

Is this something you can share? Put the PDF on a server someplace and post a link here, if you can. If you don't have your own server, you can use a service like YouSendIt.com.
What settings are you using for the export? What happens in ID if you go to Preview mode?

File numbers change after exporting

Similar Messages

Maybe you are looking for