File Open - Connection Failed

Hi,
I recently bought 1TB TC. I was able to setup the network and everything works fine.
I manually created folders and copied files on to TC (I didn't want to use backup).
Whenever I open a file from TC, It gives me an error "Connection Failed...".
After I press Ok, it opens the file properly.
The message keeps showing for every file I open. Its very annoying.
Kindly help me.
Thanks and regards
RK

Exactly same problem here!!

Similar Messages

File Sharing "Connection Failed"

Hi
I have a newly purchased MacMini and a year old MacBook Pro, both running 10.6.6.
When I turn on File Sharing (with the afp option set) on the MacMini
it appears in the Finder sidebar on the MacBook.
When I try to connect to the MacMini from the MackBook it says "Connection Failed"
and the MacMini disappears from the Finder sidebar.
After that, when I look at System Preferences on the MacMini, File Sharing is off.
Any ideas?
MANY THANKS!
Mike

I seem to have found a solution to my problem.
After more experimentation I found that not only was File Sharing not working neither was Printer Sharing. However printer sharing worked if both computers were connected to my Netgear router by ethernet but not when the laptop was connected wirelessly.
This indicated a wireless problem and as both could access the internet however connected to the router it looked as though the router was not passing an incoming wireless message from the laptop out to the iMac via ethernet.
Consequently I switched everything off, unplugged it all from the mains power supply and left it for 25 minutes. On reconnecting and rebooting everything the printer sharing now works properly again with the MacBook Pro connected wirelessly and the iMac via ethernet to the router an, for printing, the iMac via USB to the printer.
Long may it last!
I hope this info might help others with a similar problem

TCP/IP open connection fails

Hi,
I can't establish a TCP/IP connection between my host machine and another PC. I'm using the "Simple Data Sever" and "Simple Data Client" VIs that ship with LabVIEW. Error message is below
The example VIs work finw when I use them only on my host machine.
I can confirm the following;
Correct port set
Correct address set
Firewall on both PCs is OFF
Any troubleshoot ideas?
Solved!
Go to Solution.

Try a port number over 50000. You are using port numbers in the user space. Port 2055 is assigned to the Iliad-Odyssey Protocol and 5001 is assigned to commplex-link. Not sure what eith erof these are or how widely they are used but you could be runnin ginto a conflict. Ports 49152-65535 are reserved for dynamic/private use. You can get more information here regarding IP ports. It is worth a try. The other thing you could do is install Wireshark on each PC and see if the packet (TCP-SYN) is getting through the client and server.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

FormsGraph: open HTTP connection failed

I have the forms 9i demos installed and they work fine. However when I put my own form into the bigraph\forms directory and try to run it, the form itself runs but I have no chart. The implementation class is the same as in the FormsGraph demo.
I have copied the [bigraph] config information in forms90demo.cfg to my own config, changing only the fmx name and the userid. However, the java console shows
..java.lang....open HTTP connection failed
followed by a number of java classes.
What could be going wrong?
Adrian

Frank, this is from the java console
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 90290
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
and this is the forms90demo.cfg, which I have
modified to make sure I hadn't missed anything
for FormsGraph capabilities
(I have stripped out the other named configs)
# Forms 9i Samples and Demos Configurations
# Generic settings for the Demos and Samples
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
baseHTML=demo90base.html
baseHTMLie=demo90baseie.html
baseHTMLJInitiator=demo90basejini.html
HTMLdelimiter=%
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
envFile=forms90demo.env
# The next parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x.
# The Demos want to use JInitiator as we ahve many demos that need a 1.3 JVM
IE=JInitiator
# These settings support running and debugging a form from the Builder:
otherparams=debug=%debug% buffer_records=%buffer% debug_messages=%debug_messages% array=%array% query_only=%query_only% quiet=%quiet% render=%render% host=%host% port=%port% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
debug=no
buffer=no
debug_messages=no
array=no
query_only=no
quiet=yes
render=no
host=
port=
record=
tracegroup=
log=
term=
# Values for the Forms applet parameters:
serverURL=/forms90demo/l90servlet
codebase=/forms90demo/java
imageBase=DocumentBase
formsMessageListener=
recordFileName=
serverApp=default
# General Shared settings which define the Look and feel of the Demos
width=675
height=480
separateFrame=false
splashScreen=no
lookAndFeel=oracle
colorScheme=blue
background=/forms90demo/images/blue.gif
logo=/forms90demo/images/Forms9i.gif
# Other settings
scripting=false
# Default JARs
archive=f90all.jar,/forms90demo/jars/demo90.jar
archive_jini=f90all_jinit.jar,/forms90demo/jars/demo90.jar
archive_ie=f90all.cab,/forms90demo/jars/demo90.cab
# Jinitiator and iAS general settings
# Number of times client should retry if a network failure occurs. Only
# change after having read the documentation.
networkRetries=0
# 4) Parameters for JInitiator (used with Windows clients)
# Page displayed to Netscape users to allow them to download JInitiator.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90demo/jinitiator/us/jinit_download.htm
# Parameters related to the version of JInitiator.
jinit_classid=clsid:CAFECAFE-0013-0001-0013-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,13
jinit_mimetype=application/x-jinit-applet;version=1.3.1.13
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
[qt]
userid=capel/james@bond
form=portfoliomanager.fmx
#width=960
#height=1200
#baseHTML=qtbase.htm
#baseHTMLjinitiator=qtbasejini.htm
#baseHTMLjpi=qtbasejpi.htm
#baseHTMLie=qtbaseie.htm
archive=f90all_jinit.jar,/forms90demo/jars/demo90.jar,/forms90demo/jars/FormsGraph.jar
archive_jini=f90all_jinit.jar,/forms90demo/jars/demo90.jar,/forms90demo/jars/FormsGraph.jar
#background=NO
#look-and-feel=Generic
#logo=NO
imagebase=codebase
# End
Even when I replace graph90.fmx in the [bigraph] named configuration with my portfoliomanager.fmx I still get these errors. This leads me to think there is something wrong with the form itself. The demos work fine.

Open HTTP connection failed

Hi all.
The environment is J2SDK4 + Tomcat4.0.4
I tried to implement the WebClient.java in SUN/Marty Hall's book "Core Servlets and JavaServer Pages".
Everything compiles okay. All the java and class files are in a package under the /examples folder in tomcat.
When I invoke WebClient.html in "http://localhost:8080/examples/" I got this error:
load: class com.omh.utilities.WebClient not found.
java.lang.ClassNotFoundException: com.omh.utilities.WebClient
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
...etc...
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
...etc...
Other servlets okay.
Can someone point me in the right direction please.
TIA :-)

Oops, forgot about the dukes.
Here is a more detailed description of my problem:
My environment is j2sdk4 and TC404. I am trying to implement SUN/Marty hall's WebClient for administering host, port and requests. The code uses java.net's SocketUtil. e.g.
(NetworkClient.java)
Socket client = new Socket(host, port);
handleConnection(client);
protected void handleConnection(Socket client){
PrintWriter out = SocketUtil.getWriter(client);
BufferedReader in = SocketUtil.getReader(client);
etc
I'm not sure whether this is TC4 or a java related problem, but all java code compiles to class file okay.
My path is $CATALINA_HOME/webapps/examples/
In the server.xml I've uncommented the example Context, like this:
(server.xml)
<Connector className="...Ajp13Connector" ...etc...>
<Connector className="org.apache.catalina.connector,http.HttpConnector
port="8080" minprocessors="3" maxProcessors="10"
enableLookups="true" acceptCount="3" debug="0"/>
<Engine jvmRoute="blurb" name="blurb" defaultHost="localHost" debug="2">
<Logger...>
<Realm...>
<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true">
<Valve...>
<Logger...>
<Context path=/examples" docBase="examples"
debug="0" reloadable="true" crossContext="true">
</Context>
In my TC log, I've this error:
"GET /examples/com/omh/utilities/WebClient.class HTTP/1.1" 404 675
On the java console, I have these errors (they tend to be very long and tedious):
load: class com.omh.utilities.WebClient not found.java.lang.ClassNotFoundException: com.omh.utilities.WebClient     at sun.applet.AppletClassLoader.findClass(Unknown Source)     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)     ...etc...Caused by: java.io.IOException: open HTTP connection failed.     at sun.applet.AppletClassLoader.getBytes(Unknown Source)     at sun.applet.AppletClassLoader.access$100(Unknown Source)
...etc...
Other demo and example servlets and jsp that come with the standard install work find. Other stuff I put in examples work find as well.
Is this a TC setup error on my part???
TIA

Db tools open connection.vi does not get password from dsn file

I am

The database is a Microsoft SQL server database. Again, my IT group does not want the password hard coded into the application. Their preference would be for the password to be extracted from the dsn. I have tried both a file dsn and a system dsn which were created in the data sources app in control panel --> administartive tools. Neither dsn works (unless I wire the password to the databse tools open connection vi). Both dsn's work fine from the windows data sources application. I have not been able to figure out how to attach graphics to a post on the board here, so I 'm not sure how to attach the error message (or my block diagram). The text from the error message is below. Wiring in the password causes the error to go away.
Error -2147217843 occurred at DB Tools Open Connec (String).vi->DB Tools Open Connec (Path).vi->FindShiftNumber.vi
Possible reason(s):
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'eslprodsproc'. in DB Tools Open Connec (String).vi->DB Tools Open Connec (Path).vi->FindShiftNumber.vi

Could not open a connection to host on port 23 : Connect failed

Hi,
I am using Oracle Unbrakeable Linux 5, when i try to connect to the server from the client machine using TELNET, i get the following error
c:/> telnet 192.168.6.184
Connecting to 192.168.6.184...Could not open a connection to host on port 23 : Connect failed.
regards,
Charan

Hi,
i did the following but still doesn't work
# mv /etc/securetty /etc/securetty.bak
The following is the Hosts file
=====================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1     localhost.localdomain     localhost
192.168.6.184     vision12.dsrc2.com     vision12
#::1          localhost6.localdomain6     localhost6
192.168.6.181     prod20.dsrc2.com     prod20
============================================================
When i try to connect to other server using TELNET from this server, i am able to connect. and when i try to connect to this server from other server using TELNET i am able to connect. But, when i try to connect from the CLIENT Machine, i am not able to connect, the client machine is Windows 2000 Professional.
SERVER to SERVER communication using TELNET is working.
CLIENT to SERVER communication using TELNET is not working.
regards,
Charan

Java.io.IOExcetion :open HTTP Connection Failed

Hi Everybody,
I'm getting the java.io.IOExcetion :open HTTP Connection Failed error when I'm trying run a html page with an embedded Applet in it.
We are having a proxy server and all our network traffic have to be done through proxy.
But in Browser we give exemption to local host.
When I run the html file outside JDeveloper keeping it in the same directory in which the Applets class file is : I'm getting the Applet running.
But If I run the html page From JDeveloper , I'm getting the above said error.
My JRE is configured to use Browser settings and the browser is set to use the proxy.
Why are applets not able to connnect to the sever?
How to make Jdeveloper connect to proxy?
Thanking you for the answer?
Samba

Oh ! I thought i could change in my pc control panel settings for rectify the error (java.io.IOException: open HTTP connection failed.)..
Ok now my name is displayed in forum..
Which trigger i have to call when a form is loaded? (Instead of When-New-Form-Instance ).
I am running samples which i downloaded from your website only.(A java input dialog box)
Input Dialog box is not displayed?
and also java.io.IOException: open HTTP connection failed error is displayed...

[Forms6i - PJC/BeanArea] java.io.IOException: open HTTP connection failed.

Hi,
I'm using a pjc on my forms but on runtime i received an error: open HTTP connection failed.
The output of my java console is :
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = D:\documents and settings\OFV7600
Proxy Configuration: Automatic Proxy Configuration
JAR cache enabled
Location: D:\documents and settings\OFV7600\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://do040001334/forms60java/f60all.jar from JAR cache
Loading http://do040001334/hsd65-java/hst65.jar from JAR cache
Loading http://do040001334/forms60java/classes12.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest.jar.sig from JAR cache
Loading http://do040001334/forms60java/browser_jpkg.jar.sig from JAR cache
Loading http://do040001334/forms60java/TutoFichier.jar.sig from JAR cache
Loading http://do040001334/forms60java/stip.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_scroll.jar.sig from JAR cache
Loading http://do040001334/forms60java/client.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_geosoft.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest20060320.jar.sig from JAR cache
connectMode=Socket
serverHost=DO040001334
serverPort=9000
Forms Applet version is : 60824
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Where is my problem ?
How to resolve my problem ?
Thanks

thanks,
I had do the classpath
Now, I have another problem
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = D:\documents and settings\OFV7600
Proxy Configuration: Automatic Proxy Configuration
JAR cache enabled
Location: D:\documents and settings\OFV7600\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://do040001334/forms60java/f60all.jar from JAR cache
Loading http://do040001334/hsd65-java/hst65.jar from JAR cache
Loading http://do040001334/forms60java/classes12.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest.jar.sig from JAR cache
Loading http://do040001334/forms60java/browser_jpkg.jar.sig from JAR cache
Loading http://do040001334/forms60java/TutoFichier.jar.sig from JAR cache
Loading http://do040001334/forms60java/stip.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_scroll.jar.sig from JAR cache
Loading http://do040001334/forms60java/client.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_geosoft.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest20060320.jar.sig from JAR cache
connectMode=Socket
serverHost=DO040001334
serverPort=9000
Forms Applet version is : 60824
_____START CADViewerWrapper() constructor_____
Running CADViewer 8.0.6d
Exception =java.security.AccessControlException: access denied (java.io.FilePermission viewer.cfg read)
java.security.AccessControlException: access denied (java.io.FilePermission viewer.cfg read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkRead(Unknown Source)
     at java.io.File.isDirectory(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at com.cadviewer.be.a(Unknown Source)
     at com.cadviewer.be.do(Unknown Source)
     at com.cadviewer.e0.m(Unknown Source)
     at com.cadviewer.e0.a(Unknown Source)
     at com.cadviewer.ViewerAWT.<init>(Unknown Source)
     at cadtest20060320.CADViewerWrapper2.<init>(CADViewerWrapper2.java:78)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
Netscape security model is no longer supported.
Please migrate to the Java 2 security model instead.
Netscape security model is no longer supported.
Please migrate to the Java 2 security model instead.
protocol=file,fileURL.getHost()=,fileURL.getPort()=-1,fileURL.getFile()=/d:/acad_B/es/cat/STIP/Extract/410009.dwf
FileToArray url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
longName=dummy.dwf
java.lang.NullPointerException
     at java.awt.Container.addImpl(Unknown Source)
     at java.awt.Container.add(Unknown Source)
     at cadtest20060320.CADViewerWrapper2.<init>(CADViewerWrapper2.java:84)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
__START CadWrapper public void init
__END CadWrapper public void init
What about

Webutil - Open HTTP Connection failed error

Hi all,
I am trying to setup webutil on 9iDS. I have configured all the necessary files & the registry as per the manual & the read me.html.
I have doubts on the \ (slash) used for the virtual path in orion_web.xml and forms90.conf. Is it supposed to be
C:\webutil\lib or C:/webutil.lib ?
Should WebUtilArchive be set to /forms90/webutil/webutil.jar or /webutil/webutil.jar?
Can someone please help me with the foll. error.
Console message
WARNING: Unable to cache http://houwdisndgd01:8888/forms90/java/=/forms90/webutil/webutil.jar
Loading http://houwdisndgd01:8888/forms90/webutil/jacob.jar from
JAR cache
Loading http://houwdisndgd01:8888/forms90/java/f90all_jinit.jar from JAR cache
load: class oracle.forms.webutil.common.RegisterWebUtil not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
BTW I don't get this error on the apps. server but my call to CLIENT_WIN_API_ENVIRONMENT.READ_REGISTRY or WRITE_REGISTRY still raises the When Others exception on the apps server.
Please help !
Thanks
Kalpana

Check the entries pointing to webutil
I see an '=' in your path.
cache http://houwdisndgd01:8888/forms90/java/=/forms90/webutil/webutil.jar
my entries for webutil.jar (on windohs) looks like this
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar

Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'

Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Jun 22 11:56:40 2009                             110 0.000
110
4 ETW000 [dev trc     ,00000] db_con_init called                                    27 0.000
137
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             62 0.000
199
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              77 0.000
276
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000                                                                            8142 0.008
418
4 ETW000 [dev trc     ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              43 0.008
461
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000                                                                              61 0.008
522
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000                                                                             421 0.008
943
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000                                                                              46 0.008
989
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000                                                                              75 0.009
064
4 ETW000 [dev trc     ,00000] New connection 0 created                              48 0.009
112
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              53 0.009
165
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         55 0.009
220
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              53 0.009
273
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              49 0.009
322
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000                                                                             521 0.009
843
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         84 0.009
927
4 ETW000 [dev trc     ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000                                                                              65 0.009
992
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          2033 0.012
025
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPVAP's password           49 0.012
074
4 ETW000 [dev trc     ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000                                                                              57 0.012
131
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C
      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              49 0.012
180
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000                                                                              58 0.012
238
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       48 0.012
286
4 ETW000 [dev trc     ,00000] Allocating server context handle                      42 0.012
328
4 ETW000 [dev trc     ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000                                                                              95 0.012
423
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000                                                                            4556 0.016
979
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000                                                                              59 0.017
038
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 12541        39 0.017
077
4 ETW000 [dev trc     ,00000] Try to connect with default password                 184 0.017
261
4 ETW000 [dev trc     ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000                                                                              46 0.017
307
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C
      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              48 0.017
355
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000                                                                              48 0.017
403
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000                                                                              54 0.017
457
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000                                                                              54 0.017
511
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x1113b99f8        42 0.017
553
4 ETW000 [dev trc     ,00000] Allocating server context handle                      33 0.017
586
4 ETW000 [dev trc     ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000                                                                              54 0.017
640
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000                                                                            2547 0.020
187
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000                                                                              45 0.020
232
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 12541        28 0.020
260
4 ETW000 [dblink      ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000                                                                             220 0.020
480
4 ETW000 [dblink      ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000                                                                              42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank Shekhar

Hi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Mon Jun 22 15:54:42 2009                             109 0.000
109
4 ETW000 [dev trc     ,00000] db_con_init called                                    27 0.000
136
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             61 0.000
197
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              79 0.000
276
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000                                                                            8174 0.008
450
4 ETW000 [dev trc     ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              43 0.008
493
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000                                                                              61 0.008
554
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000                                                                             430 0.008
984
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000                                                                              46 0.009
030
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000                                                                              76 0.009
106
4 ETW000 [dev trc     ,00000] New connection 0 created                              48 0.009
154
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              53 0.009
207
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         57 0.009
264
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              54 0.009
318
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              49 0.009
367
4 ETW000 [dev trc     ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000                                                                             526 0.009
893
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         84 0.009
977
4 ETW000 [dev trc     ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000                                                                              64 0.010
041
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000                                                                            1464 0.011
505
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code -1           40 0.011
545
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000                                                                              58 0.011
603
4 ETW000 [dblink      ,00428] ***LOG BY2=>sql error -1     performing CON [dblink#3 @ 428]
4 ETW000                                                                              74 0.011
677
4 ETW000 [dblink      ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000                                                                              55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar

Telent:could not open connection to the host on port 23 connect failed

Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSM

user9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access).

Failed to update table name (location): Failed to open connection.

Folks,
ENV : SQL Server 2005, CR 2008 SP3, Windows Server 2003
All the reports are working fine except for 4 of them. All of them demonstrate the same symptoms.
Failed to print/preview report with the error 'A Crystal Reports job failed: Failed to update table name (location): Failed to open connection. Failed to open connection. COA.rpt
All the reports use OLE DB connection. I have verified the the DB Connection Information. It's the same across all the rpt files.
Please help.
Regards,
Balaji K

Hi,
Additional Info:
CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
Balaji K

Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
Thanks

Hi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

JPS-06514: Opening of file based keystore failed.

I have a fresh install of JDeveloper 11.1.2.3.0 (Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1). When I try to start the integrated WebLogic Server from the Application Servers explorer tab, it fails and crashes with "JPS-06514: Opening of file based keystore failed." The entire output console content is pasted below for your reference. I am under time pressure, so the sooner somebody can help, the better. Thanks in advance!
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~3\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\xqrl.jar;.;c:\oracle\middleware\wlserver_10.3\server\lib;M:\dommgr\DomainManager\classes;M:\3rdparty\wls_10.3\weblogic.jar;M:\3rdparty\wls_10.3\wlfullclient.jar;M:\3rdparty\wls_10.3\wljmxclient.jar;M:\3rdparty\wls_10.3\wlclient.jar;
PATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\native;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~3\jre\bin;C:\Oracle\MIDDLE~1\JDK160~3\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\IBM\RationalSDLC\ClearCase\bin;C:\Program Files\IBM\RationalSDLC\common;M:\etc;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\FCOCA~1.COR\AppData\Local\Temp\trustStore7654511046496503013.jks -Ddmsc_config_file=M:\etc\dommgr.properties -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=C:\Oracle\MIDDLE~1\JDK160~3/jre/lib/endorsed;C:\Oracle\MIDDLE~1\WLSERV~1.1/endorsed -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
<19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<19-Dec-2012 2:37:24 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>
<19-Dec-2012 2:37:24 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050 >
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
19-Dec-2012 2:37:26 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<19-Dec-2012 2:37:26 o'clock PM EST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:148)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
     at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     Truncated. see log file for complete stacktrace
>
<19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
<19-Dec-2012 2:37:26 o'clock PM EST> <Warning> <Security> <BEA-090922> <Certicom SSL is available, however JSSE is being used for SSL, since JSSE has been selected by attribute SSLMBean.JSSEEnabled, either explicitly or by default.>
Process exited.

I believe you can chmod back to your app user and correct the issue.
-ryan

File Open - Connection Failed

Similar Messages

Maybe you are looking for