File opening as Placed smart object layer, instead of separate file

how to open an image in photoshop cc like photoshop cs3?
in cc it is automatically open as smart object on the other photo which is already open..i want to open 2nd image as a different window

I don't believe there's an option to change whether dropping an image on another image places it as a new layer, no. I think you'll need to get used to doing things a little differently than you have been. I'm sorry to have to bear that news, but it only takes a week or two to build new habits.
This behavior isn't too new, by the way. I think the "drag to workspace to place file on top of open document" behavior changed back in Photoshop CS5, if memory serves.
-Noel

Similar Messages

Photoshop smart object layer will not open in ACR when I double click

I have a raw file opened up in photoshop, duplicated it, made them smart objects, when I click the smart object icon on the file, i get another copy of the file in photoshop, the file doesn't open up in acr, is there a setting i'm missing?
Message was edited by: Rodwf

If you dupe that smart object layer you still have one smart object change one the other also changes. If you want two smart object for the save image so you cab have two versions of raw conversions you need to use menu Layers>smart Object>New smart object via copy..

Automating RAW file conversion to Photoshop with Smart Object Layer

Hi
Can anyone tell me if it is possible to automate an action (and the steps) to open a series of photos from their raw file state to a Photoshop file with a smart object layer. I have tried **** this... recording an action without success... it ends up creating a photoshop file with a background layer, no smart object layer.
Am i missing something obvious? Thanks for your help!
Regards bruce

Hi
Can anyone tell me if it is possible to automate an action (and the steps) to open a series of photos from their raw file state to a Photoshop file with a smart object layer. I have tried **** this... recording an action without success... it ends up creating a photoshop file with a background layer, no smart object layer.
Am i missing something obvious? Thanks for your help!
Regards bruce

How do i open my multiple smart objects in my psd in one illustrator vector file?

HELLO
I have created a psd.
It contains multiple smart objects which when double clicked link you to illustrator.
I would like to open all the vector images from this file in one illustrator file.
Is this possible?

I guess it might be (almost) possible with Scripting in principle but probably not practically.
To elaborate:
One could open all the Smart Objects with a Script and with BridgeTalk it should be possible to have Illustrator perform tasks on those.
But one can not, as far as I know, directly access scale, rotation, skew of a placed Smart Object with a Script, so that information would have to be determined with work-arounds or (partially) neglected.
If you need vector output why did you make the arrangement in Photoshop?

Smart object layer from PS to AI. how to use??

I successfully work AI vector objects as placed objects into PS by copy pasting or file/place into a smart object layer in PS, I find value in making changes to my vector object dimensions in AI and seeing them updated in PS,
but I don`t know how to do it the other way, meaning a PS jpeg on a layer to AI as smart object, I choose an image on its own layer in PSCS4 and convert to smart object, I (right click) export the contents as jpeg smart object, and then back in AI go file/place the smartobject jpeg, when I make changes to the PSsmartobject in PS like colour shift or dimensions change nothing happens in AI,
I would like to have an image pasted from PS into AI whereby I can change colours and dimensions or add pixels like paint on that smartobject layer in PS and then have it update in AI...

To my knowledge Illustrator does not support smart objects. However it does support image linking. Which means if you update a image in photoshop, Illustrator will know the file has changed.
When placing the file, you will see a checkbox at the bottom of the open dialog box for link, make sure it is checked. When you update the file when Illustrator is running with that file opened, you will get a promt telling you the file has changed and asked you if you want to update the image.
If you choose not to update the image at that time, you can click on the linked file text in the top tool bar and update the image from there.
If the file is not open or Illustrator is not running then the file will update the next time you open the file.
Also you will find a edit original button in the top tool bar to take you back to what ever image editor is assigned to that file format.
To assign a file format to photoshop:
For this example we will use jpeg extention
1) Open windows explorer
2) Menu options tools>folder options>File types tab>scroll to jpeg and click on it
3) Click the advanced tab
4) see what actions are listed odds are only open and printo are listed
5) If Edit is not listed, click on the new button
6) For the action type EDIT
7) For the application used to perform action click the browse button
8) Browse for photoshop.exe
9) The following should now be in the application used to perform action box:
"C:\Program Files\Adobe\Adobe Photoshop CS3\Photoshop.exe" %1
The above file location is assuming you have CS3 and you used the default installation edit original button in Illustrator and the right mouse button menu in windows explorer will take you to photoshop to edit the file.
10) After you click OK you will see the new EDIT action in the list
11) Click OK and then click close to get out of all the dialog boxes
The action can be removed at any time or edited to use another application.

Extracting an .xmp sidecar from an ACR-edited RAW smart object layer...

Hello all. Given the following situation:
Several thousand TIFF files, each containing two RAW files embedded into separate Smart Object layers. The RAW files were named with sequential numbers prior to being composited into the TIFF files via a script, and the TIFF filenames correspond to those of the embedded RAW files. The RAWs have subsequently been edited in ACR from within the TIFF files.
I've done a little digging, but I can't seem to turn up answers to several related questions:
A) Should I wish to re-extract the RAW files from the smart object layers with the edits that have been applied, is there a method of PerLayerMetdata that can be used to extract a complete .xmp sidecar that will be recognized by ACR and associated with the exported RAW?
B) Should I wish to change the sequential-naming of the parent TIFF files, is there any method to correspondingly change the filenames of the embedded RAWs directly within the smart object layer? In other words, using PerLayerMetdata, can the filenames of the RAWs be changed without exporting the RAWs using a different filename and then replacing the contents of the smart object layer?
C) I would ultimately like to be able to save the embedded RAWs as DNGs with their ACR edits applied, if necessaray. Given a way to accomplish A), above, it would be a fairly simple to export the RAWs and associated .xmp files and then run the DNG converter on the lot. However, does anyone know of a way to save a DNG directly from the smart object layer?
Any ideas or pointers to existing documentation are much appreciated.

Thank you kindly, Michael. I see now that the example I was viewing had done exactly what you describe, writing ACR settings into the SO layer's metadata at the time of embedding. I was only looking at the portion which later accessed those settings using PerLayerMetadata, and I had mistakenly assumed that CS5 was automatically embedding xmp data in this manner, now, when opening or placing a RAW file as a SO.
I don't see a direct way to get at the ACR settings of a camera raw file embedded in a smart object.
This is sort of what I was afraid of. They're in there, somewhere, but I'm having no luck figuring out how to access them.
If the ACR settings for a RAW smart object are, indeed, not exposed to automation in some manner, I think I must change my workflow such that either: A) No edits are performed in ACR after object embedding; or B) the RAWs are converted to DNGs prior to smart-object embedding so that the ACR settings can be exposed in the exported file.

Invoking script using smart object layer - fails in Windows

I have recently encountered in what seems to be a bug in Configurator in Windows. The same example works on a Mac.
The scenario is the following: a document with a smart object layer on top.
A configurator button executes the script app.activeDocument.activeLayer.resize(133.33333, 133.33333, AnchorPosition.MIDDLECENTER);
This causes an error message as below:
If I instead invoke the script manually, using File > Scripts > Browse... it works fine.
The button works fine if the smart object is rasterized.
I'm running Configurator 2 (052610), CS5 and Windows XP. Any help is greatly appreciated!

In sure if this is all you need to correct the error but the function below will return the active smart object contents type.
// returns either "vectorData" ( AI ) or "rasterizeContent" ( PS or ACR ) if smart cbject layer
// or undefined if not smart object layer
function getSmartObjectType(){
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    var desc = executeActionGet(ref);
    if(desc.hasKey(stringIDToTypeID('smartObject'))){// is smart object?
        var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('smartObject')).getEnumerationValue(stringIDToTypeID('placed'));
        return typeIDToStringID(desc);

Created Vector Smart Object layer from Ad Illust. to PS, can't see it, why?

I am creating a postcard for mail out and I am new to the CS5 group of products. I followed tutorial to drag an Adobe Illustrator file into Photoshop creating a vector smart object layer of my logo and saved it. I closed the file and re-opened it thinking I would see my logo where I placed it but all I can see is the "X" box that allows you to adjust the size of the object. Could anybody tell me the step to get the object to appear in my Photoshop file? When I click on the vector layer it takes me back to AI so I believe they are connected the way they are supposed to be. Thank you in advance for the help. If I am way off could you explain how?

I want to thank you for your responses and help.
I inadvertently figured out what I was doing wrong while talking with a friend. I didn't understand what layers really were and that they stacked on top of each other. When I placed the vector smart object I left it's position under another layer which was blocking it or my logo so that even though the resize box was showing up the logo or vector smart image was under the other layer. Once I clicked and dragged it's layer to the top of the layers the image was visable and the postcard done. Yeah!
Thanks again.

How open and copy smart object

Hi,
I read topics about smart objects but i not found solution on my problem.
1. I need open smart object layer
2. copy all layers from the smart object to another file
Thanks

I think you may be better off just copying the smart object layer from the source document into the target document. There may be several different resolutions involved and other complexities. Within a smart object layer there is a copy of the original object. So how the smart object layer was created determines what the imbedded object is. A smart object may be many thing. Could be a copy of a raw file, a copy of a layered file, contain a group of layers created from within the source document. There is a transform associated with smart object layers. When you open a smart layer into Photoshop so you can edit the embedded smart object it opens at the resolution and size of the object which may be different then the document its a layer in. The transform is only associated the layer not the object. Once open into Photoshop you can of course dupe the layers into the target document. It may be a bit complex for some layers may have layer mask and perhaps other layers clipped to it or be within a group then there is the layers visibility state. If you have both the source document and target document open in Photoshop it is easy co copy a layer from the source document to the target document. If the source layer is a smart object the associated transform will also be copied to the target document however it easy re transform the smart object layer in the target document. In the source document target the smart object layer the use menu Layers>Duplicate Layer... in the Duplicate Layer dialog in the destination section use the pull down menu to select the target document You can use the scriptlistener plugin to capture the action manager code to do that.
// =======================================================
var idDplc = charIDToTypeID( "Dplc" );
    var desc24 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref14 = new ActionReference();
        var idLyr = charIDToTypeID( "Lyr " );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref14.putEnumerated( idLyr, idOrdn, idTrgt );
    desc24.putReference( idnull, ref14 );
    var idT = charIDToTypeID( "T   " );
        var ref15 = new ActionReference();
        var idDcmn = charIDToTypeID( "Dcmn" );
        ref15.putName( idDcmn, "Untitled-2" ); <====================================== target document
    desc24.putReference( idT, ref15 );
    var idVrsn = charIDToTypeID( "Vrsn" );
    desc24.putInteger( idVrsn, 5 );
executeAction( idDplc, desc24, DialogModes.NO );

Smart object layer format

Hi,
in previous discussion you helped me open a smart object. It works, but I have another problem.
Script throws "general photoshop error", because smart object layer format can not be opened in photoshop.
So I want to ask how to get a Smart object layer format??
Thank you Domaneni

In sure if this is all you need to correct the error but the function below will return the active smart object contents type.
// returns either "vectorData" ( AI ) or "rasterizeContent" ( PS or ACR ) if smart cbject layer
// or undefined if not smart object layer
function getSmartObjectType(){
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    var desc = executeActionGet(ref);
    if(desc.hasKey(stringIDToTypeID('smartObject'))){// is smart object?
        var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('smartObject')).getEnumerationValue(stringIDToTypeID('placed'));
        return typeIDToStringID(desc);

How do i drag and drop onto a smart object layer in Photoshop CS 5.5

I recently bought a 3d mock up Photoshop file as I want to mock up my designs such as business cards and other 3d items. The file notes said With a simple drag and drop on the smart object layer your design will be presented in a realistic and striking way.
Can you tell me how I do what they are telling me to do as I have played around with the file till the cows come home and can't work out how to do it. Do I need to do the old fashioned mock up way by skewing the image to fit or is there an easier way such as the drag and drop...?
Any help will be gratefully received,
Thanks

Hi here is the template PSD and then I want to put my business card design over and it says you can drag and drop as per my previous message ...

Transforming a Smart Object Layer

Plain ordinary photograph..... Start with a background layer. Add a layer for doing non-destructive cloning. Add a couple layers for adjusting curves and hue/saturation.
Then do a merge visible to create a new layer from all the underlying layers and still keep all the underlying layers.
Convert this layer to a smart object and apply Smart Sharpening.
All the above works fine.........................
Now I want to do a transform - free, scaling, whatever..... I can select the marged layer but all the transforms are grayed out.
How do I do a transform on a smart object layer?

Hi Noel. Your questions are valid... This isn't my normal post-processing.
NORMALLY, I have a couple layers for dodging and burning, probably something for other fiddling, my normal adjustment layers for curves and hue/saturation, then a "stamp visible". Depending on whether or not I wind up converting to b&w I may have a couple other layers for that.... Then I save the psd, and afterward crop and sharpen as needed. Generally,
my sharpening is to use the Smart Sharpen on my merged layer, OR to duplicate thelayer and do a high-pass sharpening.
Recently, I've seen two presentations by well-regarded Photoshop experts extolling the virtues of doing as much as possible in non-destructive ways. For sharpening, as I understand it, this means either opening the original image as a smart object, or converting to a smart object prior to sharpening. SO, I've been trying this on some images, just to see if there are some real advantages, or if it's just a big pain-in-the-neck way to do something that's pretty standard.... Frankly, I"m still not sure.
In THIS particular case, I had an image that had been edited, and the sharpening applied through the smart filter PRIOR to cropping. My wife requested a non-standard resizing, not a crop, that meant using a transform to change the aspect ratio of the image. That's when I found that the transforms wouldn't work on my smart object..
Unfortunately, as it turns out, I was right - it was an error on my part. I SELECTED part of the image on the layer with the marque tool... Had i NOT done the selection, the transform would have worked fine.....
So, the bottom line is yes, I agree that it's easy to get caught up in trying to make everything non-destructive and flexible, but sometimes it's more trouble than it's worth.

Want to apply poster edges to a smart object layer, but Filter Gallery is greyed out?

Working a Photoshop tutorial on an image. I want to apply poster edges to a smart object layer, but Filter Gallery is greyed out. Filter Gallery is also greyed out for all other layers in this project. (PhotoShop CC)

Hi Filter Gallery,
Please click on the image tab at the top and choose mode from 16bits/channel to 8bits/channel.
Then check if the filter gallery is still grayed out.
Thank you for posting on Adobe Forums.

Opening a Photoshop smart object file in Illustrator looks horrible (antialiasing problem)

Hello all,
This problem is killing me and I really wish I had done this logo in Illustrator, but I didn't now I have to suffer. Help!
I am doing a freeland job for a friend so I am not all that and a bag of chips with Illustrator. I am better at Photoshop but I need the vector, so I did my logo in photoshop and created a smart object out of it. I saved a version as a tiff and one as a jpg. My friend is creating his own leaflet in Word and the logo works beautifully there. I am creating a flyer for him in Illustrator and the logo is aliased in Photoshop but when I put it in Illustrator it looks antialiased and bad. He also has a little cheapy yahoo sitebuilder website until I create a website for him and the same logo(jpg) will not open in the yahoo site for him. I work and go to school so I don't have the time to recreated the logo in illustrator. It looks really good the way it is until I put it in Illustrator. Any ideas? please?
Thanks to anyone that answers this question, and kudos for taking time out of your busy day to calm my angst( or add to it)please don't add to it...

Hello Noel and c,
I created the logo in photoshop
( to make vector in photoshop, I need the scalability, I made the logo a smart object)
I then saved a copy as a jpg(for web) and a tif for print. I am creating a flyer in Illustrator, so I have to bring the logo into illustrator, when I do it looks like an aliasing problem. I had that aliasing problem in photoshop, but I still had text.... so I could antialias the text. In Illustrator the logo is just a tif, or jpg(I have tried both) It is not a text, but an image and it looks antialiased. In some programs the logo looks good, in some programs the logo looks bad. The only layer I have in the good photoshop file that I saved as a jpg, and as a tif is one layer that has text and the logo on it- this is a smart object. I have additional work files that have multiple layers, but I do not want multiple layers on my final print, web file. When I open up my laptop, I will save a screenshot.
Thanks so much

Open as linked smart object

Hello,
iam looking for a solution to open files in a folder
and copy then into a document.
Its working good, but i need the files to be linked smart object.
Anyone knows a solution ?
Here my Code so far:
See in line 33. Convert to smart object: ?
var file = new File('C:/User_MY PATH.PSD'),
docRef = open(file);
// Use the path to the application and append the samples folder
var samplesFolder = Folder('C:/USERS_MY FOLDER');
//Get all the files in the folder
var fileList = samplesFolder.getFiles()
// open each file
for (var i = 0; i < fileList.length; i++)
// The fileList is folders and files so open only files
if (fileList[i]instanceof File)
open(fileList[i])
// use the document name for the layer name in the merged document
var activeDocName = app.activeDocument.name;
var targetDocName = activeDocName.substring(0, activeDocName.lastIndexOf("."));
// Copy the Document
app.activeDocument.selection.selectAll()
//convertToSmartObject(); THIS ISNT WORKING - CONVERT IT ?
app.activeDocument.selection.copy()
// don’t save anything we did
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES)
//Select specific layer to paste the copy, this is to make sure the layers are in a specific position
var doc = app.activeDocument;
doc.activeLayer = doc.artLayers.getByName("bgr");
//Paste Document
app.activeDocument.paste()
app.activeDocument.activeLayer.name = targetDocName

Use scriptlistener:
var idPlc = charIDToTypeID( "Plc " );
    var desc2 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    desc2.putPath( idnull, new File( "C:\\Photos\\myPhoto.psd" ) );
    var idLnkd = charIDToTypeID( "Lnkd" );
    desc2.putBoolean( idLnkd, true );
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc3 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idHrzn, idPxl, 0.000000 );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
    var idOfst = charIDToTypeID( "Ofst" );
    desc2.putObject( idOfst, idOfst, desc3 );
executeAction( idPlc, desc2, DialogModes.NO );

File opening as Placed smart object layer, instead of separate file

Similar Messages

Maybe you are looking for