File overwritten by upgrade tool EHPI during upgrade configuration step
Hello,
During upgrade using EHPI the upgrade pauses with an error that says to replace R3trans with a newer version into the EHPI/abap/exenew directory. After copying the file and continuing with the upgrade it pauses again with the same error.
I see in the log that after continuing that the upgrade kernel file is unpacked again and thus overwites the new R3trans file with an older version.
My solution has been to restart the upgrade and simultaneously copy the file multiple times with the cp command so that a new R3trans is in exenew directory after the extraction and before the check.
I know similar errors have occurrd in previous upgrades, migrations etc.
Regards,
Robert
You could always copy the new files over to exenew ahead of time right at the start of the upgrade.
exenew is not looked at until the new exes are copied
Pravin
Similar Messages
-
Problems opening documents (zip files, excel) after upgrade to Snow Leopard
Since upgrading to Snow Leopard I have not been able to open a lot of files. Mainly, zip files and excel documents (which I had no problem opening before the upgrade. It seems that when I save the files down (from my email or whatever) the files go into the "Archive Utility" program, I try to open them from the Finder but they still won't open (or unzip).
When I go to open an excel document (most likely from a PC user), I get a msg that the file isn't formated for excel. However, before the upgrade to Snow Leopard I had no issue opening this same file in Mac Office-Excel.
Thanks in advance for your help/advise.
-KatherineHello Katherine:
I have not experienced those problems, but I do not receive Excel spreadsheets via E-mail. My Stuffit Expander version is 13.0.2.
You might want to check your Excel preferences to see if there is a setting that needs to be changed (compatibility?). I use Office 2004 so your version may be different.
You could also trash preference files to see if something happened during the install.
Barry -
File conflict while upgrading initscripts
Hi,
in order to update udev, which shows these errors (files already existing)
systemd-tools: /usr/share/man/man5/hostname.5.gz existiert im Dateisystem
systemd-tools: /usr/share/man/man5/locale.conf.5.gz existiert im Dateisystem
systemd-tools: /usr/share/man/man5/vconsole.conf.5.gz existiert im Dateisystem
I'm upgrading initscripts first, as mentioned in another posting relating to the same problem. But this gives those errors (files already existing)
hwids: /usr/share/hwdata/pci.ids existiert im Dateisystem
hwids: /usr/share/hwdata/usb.ids existiert im Dateisystem
Upgrading hwids alone still creates the same error. So what to do?Seems the proper thing to do would be to upgrade everything at once with pacman -Syu
https://bbs.archlinux.org/viewtopic.php?id=142507
https://bbs.archlinux.org/viewtopic.php?id=142508 -
Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!
Before this update of what software from what version to what version using which OS?
-
How do I upgrade CS5 to read RAW files from my upgraded camera Canon 70D. It reads my 550D
How do I upgrade Photoshop CS5 to read RAW files from my upgraded camera Canon 70D. It reads my 550D with no problem
Photoshop CS6 will run ACR 8.7.
Use the DNG converter: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7
Benjamin -
During receipt validation; the first step ie, adding the files generated by asn1c tool causes errors.. especially with the #include statements
--No such directory or file..
Why this is happening??I am adding one more thing..
Do we need to mention any linkage or frameworks or such while we are adding a .c file to
Cocoa Mac OS Project -
How do I get the "File, Edit, History, Bookmarks, Tools & Help Bar to appear on my browser. I also need my "Previous Page & Next Page" arrow... and my "Start" button to appear at the bottom of my screen. I can't navigate without these.
Be sure you are not in Full Screen Mode. The F11 key will toggle Full Screen Mode on or off. If you have no Firefox toolbars, tab bar, etc., you are probably in Full Screen Mode; your Windows Taskbar (with the "Start" button) will also not be visible.
*See --> http://kb.mozillazine.org/Netbooks#Full_screen
You can choose to use the Menu Bar (''File, Edit, History bookmarks, tools & help'') or the Firefox button menu in Firefox 4 and newer versions.
*See --> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36
The Back/Forward button (''Previous Page & Next Page" arrow'') are on the Navigation Toolbar; be sure the Navigation Toolbar is checked (to be displayed)
*See --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
Windows Start button and Windows Taskbar:
*Be sure that "Auto-hide the taskbar" is '''''not checked''''' (if checked, moving the cursor pointer to the bottom of your monitor screen will cause it to slide up; it will disappear again when the cursor pointer is moved up from the bottom
*It is best to '''check''' "Keep the taskbar on top of other windows" so that application windows like Firefox cannot cover it.
*See --> http://windows.microsoft.com/bs-Latn-BA/windows-xp/help/keep-taskbar-visible
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
ScottHi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started? -
BO XI 3.1 installation and Upgrade activity Steps
Hi Experts,
Right now we are using BO XI R2 Version, Planning to uninstall XI R2 and do a fresh installation of BO XI 3.1 with SP3.
Do I need to install the Java latest version for XI 3.1? Right now we have the following setting,
j2re1.4.2_04
j2re1.4.2_16
jre1.5.0_14
Since the up gradation of Reports, user, groups, universe events etc are from XI R2 version to XI 3.1.So Is it enough to
install BO XI 3.1 with SP 3, or do I have to go for FixPack inorder to avoid problem after this upgrade activity.
Could you please tell me about the BOXI R2 to XI 3.1 installation and Upgrade activity Steps.
Regards,
SridharanHi,
you dont need a special JRE version on the Server. With the installation of BO a own JRE will be installed for BOE. Only for developing WebI reports the developer need a 1.6.x JRE later on.
There is already FixPack 3.1 out but installing "only" SP3 should be sufficient.
I would recommend you check the upgrade guide from Rel.2 to XI 3.1:
https://websmp208.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
You need a S-User to Login.
Regards
-Seb. -
How do I change the size of file menu's and tool icons in Photoshop' opening page.
How do I increase or change the size of file menu's and tool icons on the opening page/worksheet of Photoshop? The File Menu drop down commands read properly at a comfortable size. I am not sure how I accomplished this, but everything I have tried has no effect on the other page items.
Hello, you can change most of Photoshop's interface text by going to preferences>interface>UI font size.
For the size of the top menus and the whole interface, there is no function to do that for the moment. I suggest to vote on this thread: http://feedback.photoshop.com/photoshop_family/topics/problem_with_hi_res_monitors -
Can not open new blank tab window from file, new tab.In Tools/Options/Tabs I have ticked open new window in new tab?
The Ask Toolbar is probably causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.
-
View log file via third party tool
Hi All,
Using Oracle EBS 11.5.10.2
Database 10g
How can I show the oracle log file through third party tool like Java.
PS
Edited by: PS on May 28, 2012 9:21 AMHi,
Once a concurrent request is completed, Log and Output file is created and details can be fetched using below query,
SELECT OUTFILE_NAME,LOGFILE_NAME
FROM fnd_concurrent_requests
WHERE request_id = <Your Request ID>
This will tell you the file name along with completed path.
You can copy this files to other locations and need third party tool to read this files.
I hope this helps, how to view log files from other tools.
Regards,
Saurabh -
I can't restore my file,edit,history,bookmarks,tools and help
my file,edit,history,bookmarks,tools and help is missing
Hit the '''Alt''' key ''(Cmd for Mac)'' to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.
-
I have opened files in photo shop and illustrator and in previously saved files only the last tool u
I have opened files in photo shop and illustrator and in previously saved files only the last tool used can be used even though I have changed the tool in the tool bar. In new files onyly the pencil with the strike thru is available even though I try other tools and create new layers.
xyz33 wrote:
I have opened pdf files from the web in ibooks and so have presumably saved them on the ipad.
If you see the PDF files in iBooks, then you have saved them. If you don't see them in iBooks, they are not on the iPad.
Try transferring purchases before you sync with iTunes. Bit follow this with a sync, if iTunes does not sync on it's own.
Transfer purchase.
http://support.apple.com/kb/HT1848 -
I have had mozilla on my desktop for 2 months. Last week I lost the arrows to go back, file,edit,viewhistory,bookmarks,tools,help on the open page. I tried the f11 button. I can't navigate without the address bar. Any help would be appreciated.
Does this help ?
* [[Back and forward or other toolbar items are missing]]
Maybe you are looking for
-
Old computer died - need to get itunes songs/apps on new computer
Our old computer has died. Repair guy is able to retrieve files from hard drive. My kids have an ipod nano and ipod touch. How do we get the new computer set up and get all of the songs/apps/movies onto the new computer? Should I ask repair guy to lo
-
i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do
-
Automate finder window properties in subfolders with AppleScript?
Automator can set window view all the way down to the subfolders. But I have to use AppleScript to set the window's position and columns' widths one at a time. This is the AppleScript I use: tell application "Finder" activate set bounds of Finder win
-
Hi. I'm trying to make an insert into the backing map of another cache inside the EntryProcessor, but get the following error: An entry was inserted into the backing map for the partitioned cache "another-cache" that is not owned by this member; the
-
Has anyone updated their 9300 curve 3G to the latest OS 6 ver 6.0.0.723?
Let us make this thread for evaluation of the OS 6 updates for 9300 users.