File Panel Directory Problem

I'm running Dreamweaver 8 on Mac OS X accessing a connected
samba file share. In the file panel, I noticed something strange.
Some directories do not show as folders, but as an unknown file
type. Refreshing the list produces the same. I began looking at the
pattern of strange directories. Every one that has a problem
contains a subdirectory named the same as the parent. By renaming
the subdirectory to something different, and then refreshing the
file panel, they appeared normally. Since I cannot rename all of
the subdirectories, I need a better solution. Any suggestions would
be appreciated.
Thanks.

Have you seen if this same problem occurs on another site?
Just to be sure
I understand, you have a folder named "foo", and if it
contains a folder
named "foo" you see an unknown file type?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"WPPRob" <[email protected]> wrote in
message
news:elseer$3ad$[email protected]..
> I'm running Dreamweaver 8 on Mac OS X accessing a
connected samba file
> share.
> In the file panel, I noticed something strange. Some
directories do not
> show
> as folders, but as an unknown file type. Refreshing the
list produces the
> same. I began looking at the pattern of strange
directories. Every one
> that
> has a problem contains a subdirectory named the same as
the parent. By
> renaming the subdirectory to something different, and
then refreshing the
> file
> panel, they appeared normally. Since I cannot rename all
of the
> subdirectories, I need a better solution. Any
suggestions would be
> appreciated.
>
> Thanks.
>

Similar Messages

  • Problem with File panel and Local files

    I am having a couple of problem using Dreamweaver  (which may be related) and can’t find any appropriate help on the web site.
    I have created a small website and have it up and running.    I’m now trying to do some minor modifications.     But Dreamweaver seems to have lost the address of my local files on my home computer (although files are still there in the same place.)      In the on-line training material it shows how to define where the root directory is when you start developing a site,  but I can’t find where these setting are so I can check and if nessessary amend them.   If I go to Define Site from the Site drop down options,  this does not allow me to check or define the root directory.
    Secondly,  in the File panel (lower right on the screen) the address bar at the top only shows the remote files and the icons to the right (“put”, “get”, etc) have disappeared and I can’t seem to get them back.   Also that lower panel seems to be floating rather than being fixed like it was.     I have tried clicking on Classic View in the Workspace layout options but this doesn’t move things back to how they were when I first started using Dreamweaver (just a few weeks ago).
    Can you offer any advice on what the problem is and how to manage it?  Many thanks.   I'm  using Dreamweaver CS4 and an iMac.

    Immediately below the Tabs saying "Files" and Assets" is a small box 
    with arrow on the right to show the drop down list.        In the box 
    on the right there's an icon of two networked computers.  Then it 
    says, "ftp://Hill farm Web Site"  which is the name of my website.     
    If I click on the arrows to pull up the drop-down box,  I get four 
    options divided by a line.   Above the line the options are Computer, 
    HD and ftp://Hill farm Web Site.  Below the line it says manage sites.
    Below this is list of files that make up my website in a directory 
    structure.   The header for the first column reads, "Local Files",  
    which appears to be untrue, because the top line in the directory 
    structure below reads,  "ftp://Hill farm Web Site".
    Does this help?
    regards
    David

  • Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory

    Dear Experts,
    Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server 
    Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
    [root@test .vnc]#  cat xstartup
    #!/bin/sh
    # Uncomment the following two lines for normal desktop:
    unset SESSION_MANAGER
    exec /etc/X11/xinit/xinitrc
    gnome-session &
    [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
    [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
    xsetroot -solid grey
    vncconfig -iconic &
    #xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
    twm &
    [root@test .vnc]#  cat /etc/sysconfig/vncservers
    # The VNCSERVERS variable is a list of display:user pairs.
    # Uncomment the lines below to start a VNC server on display :2
    # as my 'myusername' (adjust this to your own).  You will also
    # need to set a VNC password; run 'man vncpasswd' to see how
    # to do that.
    # DO NOT RUN THIS SERVICE if your local area network is
    # untrusted!  For a secure way of using VNC, see
    # <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
    # Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
    # Use "-nohttpd" to prevent web-based VNC clients connecting.
    # Use "-localhost" to prevent remote VNC clients connecting except when
    # doing so through a secure tunnel.  See the "-via" option in the
    # `man vncviewer' manual page.
    # VNCSERVERS="2:myusername"
    # VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
    VNCSERVERS="1:oracle"
    [root@test .vnc]# ls
    passwd test.oracle.co.zm:1.pid  test.oracle.co.zm:3.log  test.oracle.co.zm:5.pid  test.oracle.co.zm:6.pid
    test.oracle.co.zm:1.log test.oracle.co.zm:2.log  test.oracle.co.zm:5.log  test.oracle.co.zm:6.log  xstartup
    [root@test .vnc]# more test.oracle.co.zm:1.log
    Xvnc Free Edition 4.1.2
    Copyright (C) 2002-2005 RealVNC Ltd.
    See http://www.realvnc.com for information on VNC.
    Underlying X server release 70101000, The X.Org Foundation
    Tue Mar 11 11:18:37 2014
    vncext:      VNC extension running!
    vncext:      Listening for VNC connections on port 5901
    vncext:      Listening for HTTP connections on port 5801
    vncext:      created VNC server for screen 0
    Could not init font path element unix/:7100, removing from list!
    localuser:root being added to access control list
    No profile for user 'root' found
    SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
    Window manager warning: Log level 32: could not find XKB extension.
    ** (eggcups:13671): WARNING **: IPP request failed with status 1030
    ** (eggcups:13671): WARNING **: IPP request failed with status 1030
    ** (nm-applet:13697): WARNING **: No connections defined
    Initializing nautilus-open-terminal extension
    Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
    Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
    Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
    Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
    [root@test .vnc]#
    Regards
    Mohammed Abdul Muqeet

    Hi,
    Try these 3 solutions
    1. Did you start vncserver services as:
    service vncserver start
    2.Check that port 5901 has not been blocked by a firewall:
    # nc -vz localhost 5901
    You should get a connection and a termination. If you get an error, fix the firewall.
    3. service iptables stop
    Hope This Helps
    Regards,
    -DK

  • Newbie problem - enlightenment: No such file or directory

    Hi, I'm new in Archlinux and I've found a ridiculous problem after install enlightenment.
    I have put:
    exec /opt/e17/bin/enlightenment_start
    on ~/.xinitrc, but drops the error:
    -bash: /opt/e17/bin/enlightenment_start: No such file or directory
    but the file IS there!! I can see it in the directory, and I can tab the command, but bash don't found it...
    I tryed others binaries in the directory and works, but only the *-config, the others don't work, no one.
    Please, anyone know why can happen this?? I'm getting mad trying to find a solution...
    PD.: Sorry for my poor english ^_^

    Sorry for the mistake
    [terseus@terseus-pc ~] ls -l /opt/e17/bin/enlightenment_start
    -rwxr-xr-x 1 root root 8908 Mar 11 14:55 /opt/e17/bin/enlightenment_start
    I think the permissions are right, I tryed with root but doesn't work.
    PD.: The webpage of Archlinux is really great! The site and the forum work perfectly even from links

  • (solved)screen problem "reopen fifo blabla: no such file or directory"

    i cant start screen. it just says "reopen fifo /tmp/screens/S-ramoneur/<random number>.pts-1.arch: no such file or directory"
    ive searched google but cant find anything.
    ive looked and the folder is there, the permissions is right, and yes i have free space on my /tmp.
    i remember having a similiar problem to this before, and solved it just by doing screen -wipe. that doesnt work now.
    it seems screen just cant create the file "/tmp/screens/S-ramoneur/<random number>.pts-1.arch" which is weird.
    screen has worked perfectly before and i have a fully functioning config which ive used a long time.
    anyone know whats wrong?
    Last edited by ramoneur (2007-10-05 11:08:36)

    ah i figured it out now, i was looking for a script that would show my current ram usage in my hardstatus line, which i totally forgot i put in my .screenrc some hours ago. guess i havent started a new screen session since then
    well the script obviously fucked everything up xD
    does anyone know a simple script that will show my total available ram, and free ram in my hardstatus line?
    it doesnt hurt asking one more question i hope...
    i want my harddrives info (available gb and free gb) displayed in my hardstatus line aswell
    Last edited by ramoneur (2007-10-05 00:33:17)

  • Samba: No Such File or Directory ? Strange Problem..

    Hello,
    I'm using Arch Linux for a while and liked it so much.. I was using Debian GNU/Linux before this distro.. Any way; I have a /pub directory which is a partition on my hd.. It's always mounted to the system and I'm always using it..
    I've configured Samba to share my music let's say.. Here's my conf file:
    [01:54] (tunix@penguix ~)$ cat /etc/samba/smb.conf
    # penguix Samba Configuration File
    [global]
      workgroup = WORKGROUP
      netbios name = TUNIX
      server string = Arch Linux
      security = share
      socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
      hide unreadable = yes
      hide dot files = yes
      log file = /var/log/samba/log.%m
      max log size = 5
      log level = 0
      encrypt passwords = yes
      guest account = nobody
    [Muzik]
      comment = Muzik
      path = /pub/Muzik
      guest ok = yes
      force user = nobody
      read only = yes
      writable = no
      browsable = yes
    I can see other computers on the network.. Other computers can see my computer and access on it.. But whenever they want to access to the directory Muzik, it says there's no such file or directory.. But the directory exists:
    [01:54] (tunix@penguix ~)$ ls -l /pub/Muzik/
    toplam 128
    drwxr-xr-x  32 tunix users 65536 2006-05-08 01:42 Yabanci
    drwxr-xr-x  30 tunix users 65536 2006-05-23 01:05 Yerli
    I've looked in the log files and it says something like these:
    [2006/05/11 03:03:56, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 03:20:42, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 03:20:44, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 03:20:45, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 13:22:10, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 13:22:12, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    [2006/05/11 13:22:12, 0] smbd/service.c:make_connection(846)
      10.0.0.212 (10.0.0.212) couldn't find service muzIk
    Any body have an idea here what this problem is about ?
    Thanks a lot..!

    Actually the problem is with the nobody account I guess... This is my new smb.conf file:
    [global]
            netbios name = TUNIX
            workgroup = WORKGROUP
            server string = Arch Linux
            hosts allow = 10.0.
            security = share
            encrypt passwords = no
            socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
            hide unreadable = yes
            hide dot files = yes
            guest account = nobody
    [Muzik]
            comment = muzik
            path = /pub/Muzik
            guest ok = yes
            read only = yes
            browseable = yes
    [emule]
            path = /emule/
            guest ok = yes
            browseable = yes
            read only = yes
    emule works fine but when somebody tries to enter Muzik directory there's the problem.. The difference between them is, emule is on an ext3 partition and Muzik on a fat32 partition...
    I'm trying different things almost 3 hours and found nothing.. I've done lots of Google research and again found nothing useable.. Please help me, I'm really stuck here...

  • Bursting Problem - A file or directory in the path name does not exist

    I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
    [042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
    at java.io.FileOutputStream.open(Native Method)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
    at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
    at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
    at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
    at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
    at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
    at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
    at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
    at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
    at PIreportburst.bEngine(PIreportburst.java:24)
    at PIreportburst.main(PIreportburst.java:51)
    -Below is the java code I'm using
    public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
    try {
    DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
    dp.process();
    catch (Exception e) {
    System.out.println(e);
    }

    Thanks Ike
    Where do you suggest setting the temp directory:
    DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
    or in the xdo.cfg:
    <property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
    ..and thanks for the link to the BIPublisherIDE
    Cheers, Mike

  • Problem right after running runInstaller - No such file or directory

    Right after I run "runInstaller" while trying to install 9.2 on a Linux machine, I get the following error:
    ./runInstaller
    Initializing Java Virtual Machine from /tmp/OraInstall2004-08-11_12-49-38PM/jre/bin/java. Please wait...
    /tmp/OraInstall2004-08-11_12-49-38PM/jre/bin/i386/native_threads/java: error while loading shared libraries: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
    Can someone please help me with this?
    Thanks,
    Michael

    Could you check the note 252217.1 on metalink?

  • Missing buttons on file panel

    Hi There,
    I have just switched from MX to 8 and am having trouble
    puting files to the server. When I go to Window, File, the file
    panel comes up with out the buttons to up load the files. When I
    click on the box to expand file, the butons show up but are not
    working. I've been through the preference box, and can't find
    anything to adjust the preferences. Any suggestions?

    Thanks for the information. I have been through the trouble
    shooting papers...several times. There is a lot of information with
    a lot of things I don't understand. Is there a troubleshooting
    tree? That way I don't have to sift through information that does
    not apply. (It is overwhelming and confusing)
    I did not mention that 1.) I switched from a PC to a Mac the
    same time I upgraded to DW8. And 2.) I downloaded the trial version
    of DW8, so I could use it until I got the DW8 cd. I am pretty sure
    I did not have this problem with the trial version.
    The following is a copy of my current log:
    < 220---------- Welcome to Pure-FTPd [TLS] ----------
    < 220-Local time is now 11:32. Server port: 21.
    < 220-This is a private system - No anonymous login
    < 220-IPv6 connections are also welcome on this server.
    < 220 You will be disconnected after 15 minutes of
    inactivity.
    > USER hus185K
    < 331 User hus185K OK. Password required
    > PASS
    < 230-User hus185K has group access to: webpage_
    < 230 OK. Current restricted directory is /
    > PWD
    < 257 "/" is your current location
    > PWD
    < 257 "/" is your current location
    > CWD /
    < 250 OK. Current directory is /
    > MKD MM_CASETEST4291
    < 257 "MM_CASETEST4291" : The directory was successfully
    created
    > CWD /
    < 250 OK. Current directory is /
    > RMD mm_casetest4291
    < 250 The directory was successfully removed
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > PWD
    < 257 "/public_html" is your current location
    > CWD /
    < 250 OK. Current directory is /
    > PWD
    < 257 "/" is your current location
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > MKD xyiznwsk
    < 257 "xyiznwsk" : The directory was successfully created
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > PWD
    < 257 "/public_html" is your current location
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > PASV
    < 227 Entering Passive Mode (216,183,98,26,208,67)
    > TYPE A
    < 200 TYPE is now ASCII
    > LIST
    < 150 Accepted data connection
    < -rw-r--r-- 1 hus185K webpage_ 14261 Jul 25 15:43
    TSHIRTS.htm
    < -rw-r--r-- 1 hus185K webpage_ 2725 Jul 25 15:43
    contactus.htm
    < drwxr-xr-x 3 hus185K webpage_ 102 Jul 25 15:43 css
    < -rw-r--r-- 1 hus185K webpage_ 4235 Jul 25 15:43
    goal.htm
    < -rw-r--r-- 1 hus185K webpage_ 4668 Jul 25 15:43
    goals.htm
    < drwxr-xr-x 37 hus185K webpage_ 1258 Jul 25 15:43 images
    < -rw-r--r-- 1 hus185K webpage_ 3362 Aug 5 01:01
    index.htm
    < -rw-r--r-- 1 hus185K webpage_ 1885 Jul 25 15:43
    inner_template.htm
    < -rw-r--r-- 1 hus185K webpage_ 12579 Jul 25 15:43
    learn.htm
    < -rw-r--r-- 1 hus185K webpage_ 3987 Jul 25 15:43
    links.htm
    < -rw-r--r-- 1 hus185K webpage_ 4505 Oct 10 16:01
    sendmail.php
    < -rw-r--r-- 1 hus185K webpage_ 3677 Jul 25 15:43 us.htm
    < drwxr-xr-x 2 hus185K webpage_ 68 Dec 4 11:32 xyiznwsk
    < 226-Options: -l
    < 226 13 matches total
    > CWD /
    < 250 OK. Current directory is /
    > PWD
    < 257 "/" is your current location
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > RMD xyiznwsk
    < 250 The directory was successfully removed
    > CWD /public_html
    < 250 OK. Current directory is /public_html
    > PWD
    < 257 "/public_html" is your current location

  • [SOLVED] mkfifo: cannot create fifo '': No such file or directory

    Hi, I'm trying to get Bar working on bspwm but I'm getting an error whenever I try to load it.
    mkfifo: cannot create fifo ‘’: No such file or directory
    At first I fiddled with it a bit and it didn't work. I figured I was making some syntax errors or whatever but the example code gives me the same errors.
    I've tried to read up on mkfifo but I'm a bit lost now. I hope someone can push me in the right direction. :)
    Last edited by Mnk (2014-08-29 16:24:37)

    I'm guessing you are running the panel script without the PANEL_FIFO environment variable set, so the script is trying to open an empty file name.
    Use the profile script to set the PANEL_FIFO variable, or set it explicitly in the panel script.
    If this is not the problem, please provide more information about exactly what you are doing.

  • Missing toolbar on Files Panel

    In the 'Files Panel' I have only the 'Files' Tab together
    with the small left window underneath it which drops down to enable
    you choose your site. The right window which normally gives you the
    choice of 'Remote' or 'Local 'view has gone and in its place the
    hyperlinked text saying 'Manage Sites'. So have the radio buttons
    on the second line where you can connect to the server and 'put' or
    'get' files.
    On the 'Site' drop down menu at the very top of the screen
    all the middle section containing the 'put' and 'get' options are
    greyed out.
    If I 'save' an updated page on our website it gets uploaded
    and the server tests ok.
    I have uninstalled Dreamweaver 8 and re-installed it - hoping
    that it would solve the problem but it made not difference and I am
    left with the same problem.
    Any help will be greatly appreciated.

    Please go to SITES | Manage Sites..., select the site name,
    and click on
    Edit. Click on the Advanced tab at the top. Tell me the
    following -
    Under LOCAL INFO
    The contents of "Local root folder:"
    The contents of "Default images folder:"
    Under REMOTE INFO
    The contents of "FTP Host:"
    The contents of "Host directory:"
    Let's see what you have first.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "DustinZ" <[email protected]> wrote in
    message
    news:fe3obv$bn0$[email protected]..
    > Thanks Murray, I just moved all the files over to a new
    site and
    > everything
    > appears normal. Now I am back to what I was having
    trouble with before I
    > started click around like an idiot. I have uploaded my
    files to my
    > server.
    > When I go to my site url I get:
    >
    > Index of/
    > Parent Directory
    > cgi-bin/
    >
    > I have refreshed my browser many times, but have the
    same result. If you
    > click on the Parent Directory nothing happens. When you
    click on cgi-bin/
    > you
    > get: Forbidden
    > You don't have permission to access /cgi-bin/ on this
    server.
    >
    > Additionally, a 404 Not Found error was encountered
    while trying to use an
    > ErrorDocument to handle the request.
    >
    > Could you please give me some ideas of trouble shooting
    this?
    >
    >

  • TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

    Brand new Mac Book Pro
    Purchased in Mexico's Department store Liverpool on June 20th 2012
    Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
    Upgraded memory from 4Gb to 8Gb on June 28th.
    Tried to write on my external HD (previously written on a windows based PC) with no success.
    Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
    Then formatted my external HD and copied back all my information to it.
    deleted all the  information from my MacBook Pro HD.
    Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
    Looked in the trash bin and there it was, all the information previously deleted..
    Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
    Could not get enough space released, after several attpempts the trash bin was finally emptied.
    All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
    Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
    "Perform a Safe Boot
    Simply performing the Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
    see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    The following is the script that appears on the screen upon safe boot. and halt after the last line.
    AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
    AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
    calling mpo_policy_init for TMSafetyNet
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Sandbox
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    calling mpo_policy_init for Quarantine
    Security policy loaded: Quarantine Policy (Quarantine)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
            The Regents of the University of California. All Rights Reserved.
    MAC Framework Succesfully initializad
    using 16384 buffer headers and 10240 cluster IO buffer headers
    IOAPIC: Version 0x20 Vextors 64:87
    ACPI: System State [SO S3 S4 S5] (S3)
    PFM64 (36cpu) 0xf10000000, 0xf0000000
    Aplconsole relocated to 0xf1000000
    PCI configuration changed (bridge=16 device=4 cardbus=0)
    [ PCI configuration end, bridges 12 devices 16 ]
    Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
    Pthread support ABORTS when sync kernel primitives misused
    com.apple.AppleFSCompressionTypeZlib kmod start
    com.apple.AppleFSCompressionTypeDataless kmod start
    com.apple.AppleFSCompressionTypeZlib load succeeded
    com.apple.AppleFSCompressionTypeDateless load succeeded
    AppleIntelCPUPowerManagementClient: ready
    BTCOEXIST off
    wl0: Broadcom BCM4331 802.11 Wireless controller
    5.100.98.75
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
    rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
    Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
    storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
    BSD root: disk0s2, major 14, minor 2
    Kernel is LP64
    com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
    com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
    Running fsck on the boot volume...
    ** /dev/rdisk0s2 (NO WRITE)
    ** Root file system
       Executing FSCK_HFS (version diskdev_cmds-540.1~25).
    BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
    launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
    launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
    Any help or suggestions on what to do next would be welcomed.
    I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
    Best regards
    Sergio Ramos

    Reinstalling MacOS does NOT fix the problem for me.  I'm still searching a solution !
    Bernard

  • Getting `No such file or directory` error while trying to open bdb database

    I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
    I am making use of Berkeley DB 4.7.25 for testing out these applications.
    The four application names are as follows:
    Writer 1
    Writer 2
    Reader 1
    Reader 2
    The application description is as follows:
    &lsquo;*Writer 1*&rsquo; owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, &lsquo;*Writer 1*&rsquo; will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well &ndash; 8 separate environments and so on.
    Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
    Writer 2 and Reader 2 processes share the environments created by Writer 2
    My DB_CONFIG file is configured as follows
    set_cachesize 0 104857600 1   # 100 MB
    set_lg_bsize 2097152                # 2 MB
    set_data_dir ../../vol1/data/
    set_lg_dir ../../vol31/logs/SUBID/
    set_lk_max_locks 1500
    set_lk_max_lockers 1500
    set_lk_max_objects 1500
    set_flags db_auto_commit
    set_tx_max 200
    mutex_set_increment 7500
    Has anyone come across this problem before or is it something to do with the configuration?

    Hi Michael,
    I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
    From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
    ) following parameters are passed to db-&gt;open function call:
    DB-&gt;open(DB *db,                    
    DB_TXN *txnid,          =&gt; NULL
    const char *file,          =&gt; file name (absolute DB file path)
    const char *database,  =&gt; NULL
    DBTYPE type, =&gt; DB_HASH
    u_int32_t flags, =&gt; DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
    int mode); =&gt; 0
    Also, DB_DUP flag is set.
    As you have rightly pointed out, `No such file or directory` is occuring during truncation.
    While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
    Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
    <ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
    </li>
    <li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 &gt; t1)</li>
    <li>After truncation, writer process closes the database and joins the environment 'Y'</li>
    <li>After this any writes to database X is not visible to the reader process</li>
    <li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
    </ul>
    Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
    Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
    Thanks,
    Magesh

  • "No such file or directory" errors on Time Machine backup volume

    I remotely mounted the Time Machine backup volume onto another Mac and was looking around it in a Terminal window and discovered what appeared to be a funny problem. If I "cd" into some folders (but not all) and do a "ls -la" command, I get a lot of "No such file or directory" errors for all the subfolders, but all the files look fine. Yet if I go log onto the Mac that has the backup volume mounted as a local volume, these errors never appear for the exact same location. Even more weird is that if I do "ls -a" everything appears normal on both systems (no error messages anyway).
    It appears to be the case that the folders that have the problem are folders that Time Machine has created as "hard links" to other folders which is something that Time Machine does and is only available as of Mac OS X 10.5 and is the secret behind how it avoids using up disk space for files that are the same in the different backups.
    I moved the Time Machine disk to the second Mac and mounted the volume locally onto it (the second Mac that was showing the problems), so that now the volume is local to it instead of a remote mounted volume via AFP and the problem goes away, and if I do a remote mount on the first Mac of the Time Machine volume the problem appears on the first Mac system that was OK - so basically by switching the volume the problem switches also on who shows the "no such file or directory" errors.
    Because of the way the problem occurs, ie only when the volume is remote mounted, it would appear to be an issue with AFP mounted volumes that contain these "hard links" to folders.
    There is utility program written by Amit Singh, the fella who wrote the "Mac OS X Internals" book, called hfsdebug (you can get it from his website if you want - just do a web search for "Mac OS X Internals hfsdebug" if you want to find it ). If you use it to get a little bit more info on what's going on, it shows a lot of details about one of the problematic folders. Here is what things look like on the first Mac (mac1) with the Time Machine locally mounted:
    mac1:xxx me$ pwd
    /Volumes/MyBackups/yyy/xxx
    mac1:xxx me$ ls -a
    . .DS_Store D2
    .. Documents D3
    mac1:xxx me$ ls -lai
    total 48
    280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 .
    282780 drwxr-xr-x 12 me staff 442 Jan 17 14:03 ..
    286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
    135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 Documents
    729750 drwx------ 104 me staff 7378 Jan 15 14:17 D2
    728506 drwx------ 19 me staff 850 Jan 14 09:19 D3
    mac1:xxx me$ hfsdebug Documents/ | head
    <Catalog B-Tree node = 12589 (sector 0x18837)>
    path = MyBackups:/yyy/xxx/Documents
    # Catalog File Record
    type = file (alias, directory hard link)
    indirect folder = MyBackups:/.HFS+ Private Directory Data%000d/dir_135
    file ID = 728505
    flags = 0000000000100010
    . File has a thread record in the catalog.
    . File has hardlink chain.
    reserved1 = 0 (first link ID)
    mac1:xxx me$ cd Documents
    mac1:xxx me$ ls -a | head
    .DS_Store
    .localized
    .parallels-vm-directory
    .promptCache
    ACPI
    ActivityMonitor2010-12-1710p32.txt
    ActivityMonitor2010-12-179pxx.txt
    mac1:Documents me$ ls -lai | head
    total 17720
    135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 .
    280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 ..
    144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
    145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
    146 drwxr-xr-x 2 me staff 68 Feb 17 2009 .parallels-vm-directory
    147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
    148 drwxr-xr-x 2 me staff 136 Aug 28 2009 ACPI
    151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
    152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
    So you can see from the first few lines of the "ls -a" command, it shows some file/folders but you can't tell which yet. The next "ls -la" command shows which names are files and folders - that there are some folders (like ACPI) and some files (like A.txt and A9.txt) and all looks normal. And the "hfsdebug" info shows some details of what is really happening in the "Documents" folder, but more about that in a bit.
    And here are what a "ls -a" and "ls -al" look like for the same locations on the second Mac (mac2) where the Time Machine volume is remote mounted:
    mac2:xxx me$ pwd
    /Volumes/MyBackups/yyy/xxx
    mac2:xxx me$ ls -a
    . .DS_Store D2
    .. Documents D3
    mac2:xxx me$ ls -lai
    total 56
    280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 .
    282780 drwxr-xr-x 13 me staff 398 Jan 17 14:03 ..
    286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
    728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 Documents
    729750 drwx------ 217 me staff 7334 Jan 15 14:17 D2
    728506 drwx------ 25 me staff 806 Jan 14 09:19 D3
    mac2:xxx me$ cd Documents
    mac2:Documents me$ ls -a | head
    .DS_Store
    .localized
    .parallels-vm-directory
    .promptCache
    ACPI
    ActivityMonitor2010-12-1710p32.txt
    ActivityMonitor2010-12-179pxx.txt
    mac2:Documents me$ ls -lai | head
    ls: .parallels-vm-directory: No such file or directory
    ls: ACPI: No such file or directory
    ... many more "ls: ddd: No such file or directory" error messages appear - there is a one-to-one
    correspondence between the "ddd" folders and the "no such file or directory" error messages
    total 17912
    728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 .
    280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 ..
    144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
    145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
    147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
    151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
    152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
    If you look very close a hint as to what is going on is obvious - the inode for the Documents folder is 152 on the local mounted case (the first set of code above for mac1), and it's 728505 in the remote mounted case for mac2. So it appears that these "hard links" to folders have an extra level of folder that is hidden from you and that AFP fails to take into account, and that is what the "hfsdebug" shows even better as you can clearly see the REAL location of the Documents folder is in something called "/.HFS+ Private Directory Data%000d/dir_135" that is not even visible to the shell. And if you look closely in the remote mac2 case, when I did the "cd Documents" I don't go into the inode 135, but into the inode 728505 (look close at the "." entry for the "ls -la" commands on both mac1 and mac2) which is the REAL problem, but have no idea how to get AFP to follow the extra level of indirection.
    Anyone have any ideas how to fix this so that "ls -l" commands don't generate these "no such file or folder" messages?
    I am guessing that the issue is really something to do with AFP (Apple File Protocol) mounted remote volumes. The TimeMachine example is something that I used as an example that anyone could verify the problem. The real problem for me has nothing to do with Time Machine, but has to do with some hard links to folders that I created on another file system totally separate from the Time Machine volume. They exhibit the same problem as these Time Machine created folders, so am pretty sure the problem has nothing to do with how I created hard links to folders which is not doable normally without writing a super simple little 10 line program using the link() system call - do a "man 2 link" if you are curious how it works.
    I'm well aware of the issues and the conditions when they can and can't be used and the potential hazards. I have an issue in which they are the best way to solve a problem. And after the problem was solved, is when I noticed this issue that appears to be a by-product of using them.
    Do not try these hard links to folders on your own without knowing what they're for and how to use them and not use them. They can cause real problems if not used correctly. So if you decide to try them out and you loose some files or your entire drive, don't say I didn't warn you first.
    Thanks ...
    -Bob

    The problem is Mac to Mac - the volume that I'm having the issue with is not related in any way to Time Machine or to TimeCapsule. The reference to TIme Machine is just to illustrate the problem exists outside of my own personal work with hard links to folders on HFS Extended volumes (case-sensitive in this particular case in case that matters).
    I'm not too excited about the idea of snooping AFP protocol to discover anything that might be learned there.
    The most significant clue that I've seen so far has to do with the inode numbers for the two folders shown in the Terminal window snippets in the original post. The local mounted case uses the inode=728505 of the problematic folder which is in turn linked to the hidden original inode of 135 via the super-secret /.HFS+... folder that you can't see unless using something like the "hfsdebug" program I mentioned.
    The remote mounted case uses the inode=728505 but does not make the additional jump to the inode=135 which is where lower level folders appear to be physically stored.
    Hence the behavior that is seen - the local mounted case is happy and shows what would be expected and the remote mounted case shows only files contained in the problem folder but not lower-level folders or their contents.
    From my little knowledge of how these inode entries really work, I think that they are some sort of linked list chain of values, so that you have to follow the entire chain to get at what you're looking for. If the chain is broken somewhere along the line or not followed correctly, things like this can happen. I think this is a case of things not being followed correctly, as if it were a broken chain problem then the local mounted case would have problems also.
    But the information for this link in the chain is there (from 728505 to the magic-135) but for some reason AFP doesn't make this extra jump.
    Yesterday I heard back from Apple tech support and they have confirmed this problem and say that it is a "implementation limitation" with the AFP client. I think it's a bug, but that will have to be up to Apple to decide now that it's been reported. I just finished reporting this as a bug via the Apple Bug Reporter web site -- it's bug id 8926401 if you want to keep track it.
    Thanks for the insights...
    -Bob

  • 'A file or directory doesn't exist' error during java stack update

    Dear All,
    I've done a fresh installation of solution manger system on IBM iseries box (OS400 & DB2 combo).
    As part of post installation activity, I've updated the kernel patch, updated the ABAP stack to sp4, and am currently doing the java stack update.
    I'm struck with one error. The log file shows:
    Feb 23, 2012 7:54:35 PM  Error: /usr/sap/SLM/SYS/global/j2eeclient/META-INF/SAP_MANIFEST.MF (A file or directory in the path name does not exist.)
    Feb 23, 2012 7:54:35 PM  Error: Error deploying Fileset Complete to /usr/sap/SLM/SYS/global/j2eeclient
    Feb 23, 2012 7:54:35 PM  Info: ***** End of File-System Deployment com.sap.engine.client *****
    Feb 23, 2012 7:54:35 PM  Error: Aborted: development component 'com.sap.engine.client'/'sap.com'/'SAP AG'/'7.0209.20110628100654.0000'/'1', grouped by :
    Deployment was not successful
    I've checked the file system and found that the directory META-INF is not present in /../../global/j2eeclient
    Please suggest a solution.
    Thank You.
    regards,
    vin

    Hi,
    This is an easy solution:
    From the OS command line, do WRKLNK, go to /usr/sap/SLMS/global/j2eeclient,  at the top where it shows the directory, do a copy on this. Then at the command line type MD, do F4, paste the directory name in the first line, then after j2eeclient add /META-INF'
    IMportant*** Make sure the full directory name is in single quotes.*
    *On the next 2 lines change INDIR to RWX.  Then press enter and re-run your job.  If you have any problems let me know.

Maybe you are looking for