File Path seems messed up

I am not sure how it happened, but my directory or file path to my Applications folder is not right.
It is in my Hard Drive Folder...
but when I open that folder I can't see 'Applications' folder
I get to the Application Folder by clicking application in the sidebar

Try modifying the script posted in this thread to set the visibility of the Applications folder to true.
(15348)

Similar Messages

External hard drive -- old file path from a previous laptop is still where to find my songs, how do I change?

My iTunes library is a mess, it is stored on an external hard drive. My old laptop died unexpectedly and I didn't have a problem resetting the file path for the library on my new laptop. The other day my son was trying to update his iPod when I wasn't home and I don't know what he did.... GRRRR Any songs I purchased on my old laptop are now not able to be found. When I click on 'get info' on a song it shows the old file path from the old laptop. Songs that I purchased since the new laptop are still playable and great. I know my songs are still there but I can't seem to get the file path to reset on the old music. HELP!!! PLEASE

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or an external drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

The temporary file path is not valid. Lightroom cannot start

Windows XP, SP3, Lightroom 2.5.
External hard drive starts acting funny. Round here we expect hard drive failure, so I order a new drive and when it arrives copy the backup onto the new drive. The new drive has the same drive letter as the old one, but not the same name. When I try to open a catalog I get: "The temporary file path is not valid. Lightroom cannot start." The catalogs seem to be fine, as when I open lightroom directly, not by clicking the .lrcat file, catalogs look normal. If I copy the lrcat file to my internal hard drive it opens. If I create a new catalog on the external drive I get the same problem.
I have tried deleting the preferences file. I have tried deleteing and reinstalling lightroom. I have used the external HD on another computer with lightroom and it opens normally.
All I can imagine is that there is some setting, somewhere in the registry which does not get erased when the lightroom gets re-installed. Any guesses?
I am at a loss! Please hope me!

Could be your Windows tempfile path is messed up. You could try going to Control Panel/Advanced and pushing the Environment Variables button.See what the TEMP and TMP variables are set to.
Under "User Variables", both of mine are set to C:\Documents and Settings\<my name>\Local Settings\Temp.
Under "System Variables", both are set to C:\Windows\Temp.
Make sure that the directories referred to are legal and on accessible drives. Make sure they aren't read-only. It wouldn't hurt to create them if they don't exist.
It's worth a try, I think.
Hal

How to Print File Path and File Name at the bottom of the Report?

Hi guys,
I have situation where i have to display my file path where i save my file. For example: U:\Reports\Monthly_Reports\Compay_xyz.jsp
also, after the file path line if its possible i would like to display the date where the last modification done on the file.
I read one of the post and some one suggested that use srw.get_report_name() but since i am a new to Reporting i am not sure how to use it.
Can anyone describe me little bit in detail please?
Thank You.

Hi,
Your logic seems to be fine and you should put it in the additional plsql code section "After displaying the page". But you may have to check you syntax by compiling it. You cannot use "LINEFEED". It should be '<br>'. This is the line break in html. Please check your type declaration. Also some ';' is missing after some statements.
Hope that helps.
Thanks,
Sharmila

How to force the File Path Control Browser button to the RT Target instead of the host machine?

I am building an application on a RT PXI system, and for one of the functions I would like the user to be able to use the browser button of the File Path Control to choose a directory on the PXI. However the browser button seems to only want open a file on the host PC, even though the application is fully deployed on the target. Note that I am controlling the PXI from a host PC.
If anyone has any suggestions that would be great. Thanks.

Hi,
Unfortunately, there is not a VI to do this. Are you browsing to these files from your host VI? In order to access the files on your PXI RT target, you'll need to FTP in and browse to them that way. You could programmatically do this, but there is not a simple VI to do so.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

[SOLVED] Can't boot Windows 8 using grub2. invalid EFI file path

English is not my native language. Please excuse typing errors.
I have just successfully installed Arch linux with grub2 as its boot manager. I
followed the arch beginner guide. I've used grub before and I'm familiar with
it, so chose to use grub instead for efistub. I installed os-prober and
ran grub-mkconfig to create the grub.cfg file. The problem now is that I recieve
an error when I try to boot windows 8. I have two drives (/dev/sda and /dev/sdb)
and I believe both are EFI-systems.
However, it's not very important for me to use grub, so if booting into windows
8 is easier using efistub, I will try that.
The computer is ASUS ux32vd with a hybrid disk with 25GB on the SSD and 500GB on
the hard drive. I believe the SSD part is used by Windows.
This is the first error I recieved when I tried to boot windows.
error: can't find command `drivemap'.
error: invalid EFI file path.
Press any key to continue...
Then I tried to follow this post
https://bbs.archlinux.org/viewtopic.php?id=150183 and made a new boot
entry "Windows 82". And I got a new error:
error: unspecified search type.
error: file '/EFI/Microsoft/Boot/bootmgfw.efi' not found
Press any key to continue...
Here are some command line outputs.
~ ᐅ sudo blkid
/dev/sdb1: PARTLABEL="HFS" PARTUUID="4613ee39-4727-4347-8134-173f590f716f"
/dev/sdb2: LABEL="INTELRST" UUID="BA5E-7431" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="304f2630-89b2-4632-a566-e8c6db9df3a9"
/dev/sda1: LABEL="SYSTEM" UUID="90FA-5332" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="5a60fff2-384a-4168-ad7b-7ba25c03c910"
/dev/sda2: LABEL="Recovery" UUID="ECE43E9AE43E674C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="5da02b32-607a-4c63-88ef-00499bd6e05c"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="6c501a91-71a5-45d8-a9ee-2e2a1c427258"
/dev/sda4: LABEL="OS" UUID="DE4241E84241C5CD" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6e182189-b0e3-479a-ac74-8e69452d7c66"
/dev/sda5: LABEL="DATA" UUID="B05448EC5448B6BE" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="be7e04ac-fb01-44fd-9571-e0b001652322"
/dev/sda6: LABEL="Restore" UUID="B8D84520D844DDEE" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="4d42c26d-2c85-4ebf-88ec-7a83a4814a61"
/dev/sda7: LABEL="ROOT" UUID="0d63036d-b624-4596-a296-1db457c068d5" TYPE="ext4" PARTUUID="707f4bca-18b4-4340-838f-ec3a39e9338a"
/dev/sda8: UUID="bcaa2c5f-150d-47c9-9a58-9a7b7ec7bed2" TYPE="swap" PARTUUID="1da43668-418c-4883-810b-e1c3dee75e61"
~ ᐅ sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 300M 0 part /boot/efi
├─sda2 8:2 0 600M 0 part
├─sda3 8:3 0 128M 0 part
├─sda4 8:4 0 186.3G 0 part /mnt/windows
├─sda5 8:5 0 190.1G 0 part /mnt/data
├─sda6 8:6 0 20G 0 part
├─sda7 8:7 0 66.5G 0 part /
└─sda8 8:8 0 1.9G 0 part
sdb 8:16 0 22.4G 0 disk
├─sdb1 8:17 0 18.4G 0 part
└─sdb2 8:18 0 4G 0 part
~ ᐅ sudo cat /boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 ECE43E9AE43E674C
else
search --no-floppy --fs-uuid --set=root ECE43E9AE43E674C
fi
drivemap -s (hd0) ${root}
chainloader +1
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-DE4241E84241C5CD' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
else
search --no-floppy --fs-uuid --set=root DE4241E84241C5CD
fi
drivemap -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
#menuentry "Microsoft Windows 8 x86_64 UEFI-GPT NTFS" {
#insmod part_gpt
#insmod ntfs
#insmod search_fs_uuid
#insmod chain
#search --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
#chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8-2" --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
~ ᐅ sudo grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
90FA-5332
~ ᐅ sudo grub-probe --target=hints_string /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
--hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1
bootinitscript
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/arch-grub/grubx64.efi /efi/Boot/bkpbootx64.efi
/efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /boot/grub/grub.cfg /etc/fstab
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 616,447 614,400 EFI System partition
/dev/sda2 616,448 1,845,247 1,228,800 Windows Recovery Environment (Windows)
/dev/sda3 1,845,248 2,107,391 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 2,107,392 392,816,639 390,709,248 Data partition (Windows/Linux)
/dev/sda5 392,816,640 791,449,599 398,632,960 Data partition (Windows/Linux)
/dev/sda6 934,809,600 976,773,119 41,963,520 Windows Recovery Environment (Windows)
/dev/sda7 791,449,600 930,902,015 139,452,416 Data partition (Windows/Linux)
/dev/sda8 930,902,016 934,809,599 3,907,584 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 24.0 GB, 24015495168 bytes, 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sdb1 ends after the last sector of /dev/sdb
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 8,392,704 46,903,295 38,510,592 -
/dev/sdb2 2,048 8,390,655 8,388,608 -
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 90FA-5332 vfat SYSTEM
/dev/sda2 ECE43E9AE43E674C ntfs Recovery
/dev/sda3
/dev/sda4 DE4241E84241C5CD ntfs OS
/dev/sda5 B05448EC5448B6BE ntfs DATA
/dev/sda6 B8D84520D844DDEE ntfs Restore
/dev/sda7 0d63036d-b624-4596-a296-1db457c068d5 ext4 ROOT
/dev/sda8 bcaa2c5f-150d-47c9-9a58-9a7b7ec7bed2 swap
/dev/sdb1
/dev/sdb2 BA5E-7431 vfat INTELRST
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda4 /mnt/windows fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda5 /mnt/data fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda7 / ext4 (rw,relatime,commit=600,data=ordered)
=========================== sda7/boot/grub/grub.cfg: ===========================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 ECE43E9AE43E674C
else
search --no-floppy --fs-uuid --set=root ECE43E9AE43E674C
fi
drivemap -s (hd0) ${root}
chainloader +1
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-DE4241E84241C5CD' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
else
search --no-floppy --fs-uuid --set=root DE4241E84241C5CD
fi
drivemap -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry 'Windows 82' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda7/etc/fstab: ================================
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda7 LABEL=ROOT
UUID=0d63036d-b624-4596-a296-1db457c068d5 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1 LABEL=SYSTEM
UUID=90FA-5332 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
LABEL=DATA /mnt/data ntfs-3g uid=sighol,gid=users,dmask=022,fmask=133 0 0
LABEL=OS /mnt/windows ntfs-3g uid=sighol,gid=users,dmask=022,fmask=133 0 0
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
5850cbb887c11947baf0379ca2d4c97e
Unknown GPT Partiton Type
dee2bfd3af3ddf11ba40e3a556d89593
Unknown BootLoader on sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 5e 1b |.X.MSDOS5.0...^.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 60 09 00 51 02 00 00 00 00 00 00 02 00 00 00 |.`..Q...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 32 53 fa 90 4e 4f 20 4e 41 4d 45 20 20 |..)2S..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|[email protected]|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |[email protected]|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
Unknown BootLoader on sdb2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 2e 20 |.X.MSDOS5.0.... |
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 80 00 e9 1f 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 31 74 5e ba 4e 4f 20 4e 41 4d 45 20 20 |..)1t^.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|[email protected]|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |[email protected]|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdc {
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-wSbit3X4/Tmp_Log: No such file or directory
/dev/sdc: open failed: No medium found
No volume groups found
mdadm: No arrays found in config file or automatically
EDIT:
I gave up trying to make grub work, so I uninstalled grub and deleted all the grub files I could find.
# pacrem grub-efi-x86_64
# rm -fr /boot/grub
That last one I came to regret later on. So I installed rEFInd using the archlinux beginners guide. When I then tried to boot into windows It told me that /boot/grub/x86_64-efi/normal.mod was not found. I then reinstalled grub-efi-x86_64 and copied /usr/lib/grub/x86_64 to /boot/grub. Now everything works fine.
Last edited by sighol (2013-06-08 21:47:49)

sighol wrote:However, it's not very important for me to use grub, so if booting into windows
8 is easier using efistub, I will try that.
The EFI stub loader is a Linux-only boot loader; however, it is possible to use the EFI stub loader in conjunction with a separate boot manager, such as rEFInd or gummiboot. In such a configuration, you'd use the boot manager to select the OS to boot (Windows or Linux, and possibly the specific Linux kernel), and the boot loader (the Windows loader or the EFI stub loader built into a specific kernel) will then take over booting the OS. In Arch, this is often easier to configure than is GRUB, since GRUB is very complex and its automated tools to help with setting things up often get it wrong.
This is the first error I recieved when I tried to boot windows.
error: can't find command `drivemap'.
error: invalid EFI file path.
Press any key to continue...
The "drivemap" command in GRUB is generally used when booting a BIOS-mode boot loader, and in fact your "Windows Recovery Environment (loader) (on /dev/sda2)" and "Windows 8 (loader) (on /dev/sda4)" GRUB entries are both built as for BIOS-mode Windows installations -- but the fact that your disks both use GPT means that Windows won't boot in BIOS mode on your computer. (This is one of the many things that the GRUB setup scripts can get wrong.)
Then I tried to follow this post
https://bbs.archlinux.org/viewtopic.php?id=150183 and made a new boot
entry "Windows 82". And I got a new error:
error: unspecified search type.
error: file '/EFI/Microsoft/Boot/bootmgfw.efi' not found
Press any key to continue...
Both your "Windows 8" and "Windows 82" entries refer to an EFI boot loader file called EFI/Microsoft/Boot/bootmgfw.efi on your EFI System Partition (ESP). This should be correct, but your Boot Info Script output doesn't show any evidence of such a file. Sometimes Boot Info Script misses such things, so you may want to check it just to be sure. Your ESP is /dev/sda1, and it looks like it's being mounted at /boot/efi by default, so check for the /boot/efi/EFI/Microsoft directory tree, and for /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi in particular. If that file isn't present, then something is wrong -- perhaps you mistakenly erased the ESP when you installed Linux, thus wiping out the Windows boot loader; or perhaps the file was accidentally deleted somewhere along the way. (Note that on FAT, which the ESP uses, case is irrelevant, and in fact case varies between the filenames reported by Boot Info Script and what's recorded in your configuration files.)
You do have another boot loader file that may be a duplicate of the Windows boot loader: EFI/BOOT/bkpbootx64.efi. This filename is generally created by Ubuntu's "Boot Repair" tool, which IMHO can do as much harm as good, especially on a system that's not booting Ubuntu. If you ran this tool, though, it's conceivable that bkpbootx64.efi is a copy of the Windows boot loader, so copying it to EFI/Microsoft/Boot/bootmgfw.efi might get things working. OTOH, the Windows boot loader relies on other files to do its job, so if they're not present, copying the Windows boot loader to its original location won't be sufficient.
If you can't get things working based on the preceding suggestions, I recommend you run a Windows repair tool. These are accessible from a Windows recovery disc. Such disc images are readily available on the Internet, but I don't happen to have any links handy. Try Microsoft's own site; images obtained from random third-party sites might contain malware. Once you've done this, chances are the computer will boot directly into Windows. You'll then need to either restore GRUB as the default boot loader or install another boot loader or boot manager. You can use the Windows "bcdedit" command to do the former, as in:
bcdedit /set {bootmgr} path \EFI\arch-grub\grubx64.efi
You'll need to type this from an Administrator Command Prompt window.

Packager fails with "Maximum file path name exceeded" on InCopy

Attempting to build the full suite with CCP 1.5.0 Build 83, running on Window 8.1 update 64-bit.
When building a 32-bit package it reaches InCopy it always stops and provides the so helpful "Maximum file path name exceeded error". This appears to only happen when building the 32-bit package, building the 64-bit package caused no issues, and even in building the 32-bit package after the 64-bit package when everything is already downloaded the same error occurs.
Tried it with:
Cache path: C:\Users\iholmes\AppData\Local\Adobe\CCP\
Destination path: F:\ISO\Adobe\Cloud\Working\CreativeCloud-06192014x86
Also tried:
Cache path: g:\Adobe\CCP
Destination path: f:\cc\x86
These are all local paths, not mapped network drives.

Same here. From: C:\Users\<user>\AppData\Local\Temp\PDApp.log:
<errorType>LongPathError</errorType>
<filePath>C:\Users\<user>\AppData\Local\Temp\{839FDA1E-684B-4164-A8A0-AC83A4D37D3F}\AICY\ LS20\10.0\InCopy_10_LS20_Win32
I can manually extract the zip file from: C:\Users\<user>\AppData\Local\Adobe\CCP\AdobeCCPCache\AICY\LS20\InCopy_10_LS20_Win32.7z to the above path (which I think is what it's trying to do) with no error, so it seems to be something Adobe is going to have to fix.
Someone else worked around it by creating a local user with a single character as the user name: Creative Cloud Packager Keeps Failing on InDesign: "Maximum File Path Name Exceeded"

File path too long when collecting??...

Hi all,
REALLY hope someone has some wisdom on this! I've searched forums and the web and not yet found an answer....
I've got a MASSIVE project on an external drive that's on the way out, so I want to collect the project that's on it to another new healthy drive. The current file structure leaves alot to be desired (several years of updating the same project and splitting it into managable portions then importing them back together several times, files still on there that aren't in use in AE anymore but have been kept 'incase we need them again later', etc...you can imagine the mess!)
SO, I'm getting the 'file path too long' error when trying to collect it. Now, I could manually go through every folder and sub folder and tidy things up within AE - this would days about a week I reckon! - but I'll do it if that's the only way. What I'm wondering is this: -
A) is the problem AE is having with the deep structure *WITHIN* ae project, or with the actual folders/files on the disk itself?
B) if I tidy it up in AE only will that fix it?
C) is there an easier way to do this rather than manually going through everything and looking for the offenders???
Thanks guys,
Jim.

GULP....so I have to reorganise my assets OUTSIDE of AE and then relink it all WITHIN AE afterwards?? With 3 x 430GB projects and thousands of assets that is going to take a looooooooonng time.
What I don't understand (or like) is how AE will let you get this far without any warning and still operate/save, etc but then when you come to collect is goes 'urr urrrr, computer says no'.
Is there really no way of automating some of this then? I mean even a script that highlighted items in the project that are over the maximum path length would save a hell of a lot of manual searching and counting.
Thanks for your replies guys but.....AAAARRGGHH!!!!!

How to use XSJS file path in Controller.js file

Hi Experts,
Regarding How to use XSJS file path in Controller.js file.
I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-services article.)
Seems to be there is no information about the same. May be the article is targetted for Beginners and above. As I am a learner I am not able to do the same.
var aUrl = '../../logic/demo_main.xsjs? (highlighted)
Suppose my XSJS file is at http://ipaddress:8000/newtest/Func.XSJS.
Can I use like below
var aUrl = 'http://ipaddress:8000/newtest/Func.xsjs?
or
var aUrl = '../../newtest/Func.xsjs?
I tried with multiple options but not able to get the expected output.
Can you please provide more details on this?

Dear Thomas,
I am a abap developer , recently we meet a problem on our webdynpro report performnace issue. As in the development, we use SALV_WD_TABLE to design a ALV. and verything work correctly in our DEV system.
But after when our QAS system, there are more records for the ALV, one of them has 21000 records. And in the layout, we have a column as checkbox.
If we click any one checkbox, then the layout will respond almost 1~2 minutes. With debug I found the most time cost in the standard program.
And with search I found that you have solution to solve it as 1,000,000 rows.
So is it possible to provide some idea or solution to us?
Many thanks for your help!
BR
Vincent Chen

How to set default file path for save

Hello all,
I'm currently blocked on the below issue and is hoping to gain your help and insights.
We have recently upgraded to InDesign CS6. Now when an INDD file created in an older version of INDD is opened in CS6, all the save dialogs would not default to the location of the original INDD file. Though if the same file is opened in the version of InDesign that created it, the save dialog goes to the proper location by default.
Debugged using our custom plugin as a gate way, and found out that after InDesign CS6 performed the document upgrade/convert, the database for the converted document loses file information. i.e. IDataBase::GetSysFile() returns nil. I think we can figure out some way to get the original file path. For example, we can intercept "kAfterOpenDocSignalResponderService", and get the original file path of the opened file from IDocumentSignalData. Though I haven't yet able to figure out a safe way to set this file path to the document, so that the save dialogs would by default point at this path.
Utils<Facade::IWorkgroupFacade>()->InitDocumentAssetManagement(docRef, filePath) seems to do the right thing, but it seems to be quite intruding, and I'm afraid that it is overkilling and will cause bad side effect for the use case I'm looking for.
So I'm wondering if anyone has any suggestions to achieve this without implementing/overriding the file save dialog.
Thanks.
-Jeff

You should be able to avoid writing your own open-doc trap by using kDocBoss's IOpenedFileInfo to obtain the original file's path. It seems fairly reliable; the only time I've seen it come up empty is for an opened QuarkXPress document.
I'm afraid I don't know of a sanctioned way to change IDataBase::GetSysFile() without going through the database's SaveAs machinery. Overriding this behavior might only be possible by replacing the regular Save dialog with your own.
But if InitDocumentAssetManagement() is helping, maybe the workgroup/asset management approach is worth pursuing. Have you tried spying on that call in the debug app? You might be able to isolate and use one of the commands that it's invoking (IAMSPManager::BindAsset() / kSetAssetAttributesCmdBoss?) without all of the side-effects of the higher-level call.

Dynamic file path problem....

Hello & thanks for your attention
I am trying to modify the action script(2) of a XML photo slideshow
I want to make it pull the photo array from a dynamic XML file
Yet nothing I try seems to be working - I was hoping someone could look at these snippets and tell me if I'm doing something incorrectly
Objective:
To make the swf file - pull its photo array - from a dynamic XML file path
Scenario:
http://www.reallivingtours.com/tours/viewTour.php?id=2092
When that URL is called by a browser
An XML file called 2092.xml is created in a /tmp/ directory
viewTour.php passes the ‘dynamic’ file path to the swf via the params
<param name="movie" value="slideshow.swf?file=tmp/<?php echo $tourID; ?>.xml">
<param name="flashvars" value="&file=tmp/<?php echo $tourID; ?>.xml">
The original AS2:
var xml:XML = new XML();
xml.ignoreWhite = true;
_root.xmlPath == undefined ? xml.load("settings.xml") : xml.load(_root.xmlPath);
The modified AS2 - I've done:
var filePath:String = new String();
filePath =_root.file;
var xml:XML = new XML();
xml.ignoreWhite = true;
_root.xmlPath == undefined ? xml.load(new URLRequest(filePath)) : xml.load(_root.xmlPath);
Can you see anything I'm doing incorrectly?
Thank you very much for your time and attention
Benn

Thanks to webqa - I've gotten a little closer to resolving this
my debugging tells me that i have an undefined error
I'm thinking - xml.load(filePath)
is not recognizing the string as a file path to the XML
Does anyone have any suggestions? thank you
var filePath:String = new String();
filePath =_root.file;
var xml:XML = new XML();
xml.ignoreWhite = true;
_root.xmlPath == undefined ? xml.load(filePath) : xml.load(_root.xmlPath);

File path control - browse button colour/color

I can't change the colour of the browse button on a file path control. I'm using LV 8.5, but I think I have the same problem on 7.1
Is the only way to change the colour to customise the control? Every other part of it seems to take colours from the tools palette.
Thanks for any pearls of wisdom.
Jon.

I am able to change the path browse button color in 8.51 are you trying to change the button color or the color of the folder on the button. To change the buttoin color use the paint tool and make sure you hit the space bar so you are painting the left color (Background color I cant remember which is which). This probably doesnt work on system buttons.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

File Path in Bridge Contact Sheet?

Does anyone know how to add the complete file path to the caption in Bridge/InDesign contact sheets? I'm using Bridge & InDesign CS3 for Windows. I know I can get all the files in subfolders by using the flattened view in Bridge to make my contact sheet, but I still need to know each image's location once it's on the contact sheet. It seems like this should be pretty a pretty basic task. Any help?

Hi DeNoveau,
I was struggling with this same issue. I found a solution that is somewhat helpful. Not ideal but better than nothing.
1. Create the InDesign contact sheet as you normally would.
2. Choose Window > Automation > Scripts
3. In the Javascript folder, find LabelGraphics.jsx
4. In the panel that comes up, choose File Path
That should do it. As I said, not ideal but better than nothing.

FIle path between iTunes and music files broken

Somehow I've managed to lose the file path connecting my songs on an external hard drive with iTunes. I've checked the advanced aoptions to make sure that iTunes is pointing to F: (instead of C:) but no dice.
Obviously I can go through and reconnect them all individually but for 16,000 songs that's not an option. I also don't want to reload the song files (by opening them directly from the drive) and lose all my play count information.
I've had this happen before when upgrading PCs or when the EHD was renamed and been able to fix it but this time nothing seems to work.

Yes it has. I recently changed from laptop to PC and managed to load iTunes on PC, copy across playcount and album artwork information and have the EHD connected and showing the correct pathways. Everything was working fine for about 3 days. When launching iTunes a couple of days ago, it asked me to go through the setup screens again (which I did) and since then the file paths have been missing. I've been into the xml file of the iTunes library and it shows everything pointing to the default c: drive location. This may be because I read that consolidating the library (under the advanced tab) would help but it didn't.

File path error1

I'm getting file path error when I run my VI. It seems that there are control characters in my filepath that are causing the error. However, I'm not sure how to fix this error. I've attached a screenshot of the error message and my VI.
I'm using the VI as a subvi in another application.
Thanks
Attachments:
file error1.png ‏40 KB
PM2_FileNamePathDialogBoxCSVFile.vi ‏30 KB

The error message also says that the command requires GPIB controller blah blah blah, but I assume it's clear to you that that's not the issue. The error you got is error 1, which the description says quite clearly is invalid input. If you look at the message you will also see that the error was at the CLOSE file function. The only relevant input you give to the close function is the reference, so that's what you need to look at.
Do you know how to debug in LV? You need to place probes on the relevant wires and then run the code. Do that for the input to the close function. My guess is that you will find out that the reference was already closed somewhere.
Try to take over the world!

File Path seems messed up

Similar Messages

Maybe you are looking for