File plays in fastforward

I am trying to add a file from itunes into my podcast. It is a voice recording done on my ipod and imported to itunes. It plays fine in the media browser, but when I drag it into the track, it compresses it and plays REALLY fast. I thought it would be OK if I exported it to iweb, but no luck.
What am I doing wrong or missing??? Everything else in the GB podcast is working fine.
thanks for any suggestions,
cianna
Mac OS X (10.4.8)

http://www.bulletsandbones.com/GB/GBFAQ.html#toofast

Similar Messages

Html files play in main stage of flash

How can macromedia flash play html files?
I have a problem my friends! First of all I should say that I
know flash is not a browser!!! I have lots of internal and external
html files next to my main swf movie and I made lots of botton for
each html files and a window next to the bottons on the left side
of my stage now the question is: how can I tell macromedia flash by
pressing each botton its especial html file play in the left
window?(and not anywhere else) I tried "get url" but html files now
are playing in a browser and not in my window!!
Maybe I made the window in the wrong way so how can I create
this window for html files?
I am not a professional user of macromedia flash –
thank you for your coaporation
In the following path you can find an example this is where I
installed my flash
C:\Program Files\Macromedia\Flash 8\Samples and
Tutorials\Samples\Text\ TextEnhancements
Here is a link that maybe show my question better
Its just 120 kb
http://scorpionsofhack.googlepages.com/html.zip

Set the sample rate higher in MainStage and you'll get lower latency.

I have now transfered my files of ripped CD's to my iTunes library three times. On each occassion, the conversion seems to occur fine, the files play, but when I close my computer and return the next day, iTunes says it cannot locate any of those files.

I have now transfered my files of ripped CD's to my iTunes library three times Since upgrading to iTunes 11 and Windows 8. On each occassion, the conversion seems to occur fine, the files play, but when I close my computer and return the next day, iTunes says it cannot locate any of those files. Three times. Beginning to lose my temper. Advice? Suggestions? Could the fact that my original library is located on a network drive have anything to do with it? Thanks for your help, all.

Repair security permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7/8 shouldn't be too different.
Repeat for the media folder if it isn't a subfolder of the iTunes folder.
tt2

*.mov files play on ipad without audio

I have recently transferred some *.mov files from my PC to iPad. These files play perfectly well on PC in both Quicktime Player and Windows Media Player. However, when I try to play them on iPad, I get video only (no sound). I have latest versions of all softwares so cannot figure out why iPad is not playing audio of only these files. I had some old *.mov files on my iPad which play perfectly well (both video and audio) so how can I fix this problem.

I had some WMV files which I had converted to *.MOV using AVS Video Converter. I have compared the properties of old *.MOV files which play on iPad perfectly well (using QuickTime Player) with the properties of the newly-transferred files and they are exactly the same in every aspect. Is it possible that because of low memory (about 4GB) left on iPad after the new files' transfer, the audio is not playing on iPad?

Why doesnt my swf file play on the server?

why doesnt my swf file play on the server? but it plays on my computer.
what do i need to do to make it work?

It easier to see why the file might not be playing on the server if you provide a link to the file on the server. That allows for checking if files are where they should be.
In your case you may want to do some repairs on the html file that you linked. It appears as though the tags are out of whack and possibly the embedding is as well. What you should do is let Flash generate the html page when you publish the swf. You are normally going to get the best results letting Flash create the embedding code.

Sonata Library Files Playing only internet connection time

Hi everyone.
My Problem ; Sonata Library Files Playing only internet connection time.When Internet connection not available sonata not playing my library files.
Thank you for helping.
MPD Conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "~/music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/Playlist"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "~/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "~/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "~/.mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "ceyhan"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
## device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "MASTER" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
Last edited by SYSTEMEDIC (2010-07-10 06:36:03)

What is dropping I guess is the question? Is it wireless? Is it your WAN connection? You need to identify where the problem is.
To do that you need to try a few things.
1. If you use wireless then bypass it and use ethernet if that is possible.. even just drag things around so you can test if ethernet fixes it. If so and wireless is in fact the problem.. then you can do a few things.
2. Wireless issues with the 7.6.4 firmware are common. Did you upgrade about the time the problems started? I am afraid the bad news is, downgrading is not like in the past where it fixed things.. 7.6.4 seems to have some permanent effect on the TC and it is never quite the same again. How this is even possible I have yet to determine.
The usual fix is factory reset.
Set wireless with short names, no spaces and pure alphanumeric. Different name for 5ghz.
Make sure security is WPA Personal with pure alphanumeric password of 8-20 characters.. unless you are more paranoid.
Fix the wireless channels and test in order. 11, 8, 6, 1
And for 5ghz try the lowest channel, 36 and then a high one, around 150.
3. No improvement factory reset again.. downgrade to 7.6.1 or even 7.5.2 if it is an older Gen4 .. at 18months it might be old enough.. no harm trying. Factory reset again after the downgrade to see if we can get rid of the memory effect.. then try the above steps again.
No luck.. whatever the upgrade did it did permanently.. no fix is available until Apple pushes out a new firmware to fix what they did in the last one. Buy a different wireless router for now and use the TC in bridge just for TM backups.

HDV file plays in VLC but not Quicktime?

I have a 3 minute video, shot in 30fps HDV and exported to an HDV (1080i60) Quicktime File (.mov). The file plays great with VLC, but Quicktime tells me a component is missing. It plays the audio, but no video shows. Even if I download whatever component I need (I am not sure what I would need), this is for a client, and they would have to do the same thing, presumably. Could it have been something in my Compressor settings?

If you have FCP, you should have the HDV codecs. If you do an they won't play this, then it is possibly some other odd format. The non-standard image size points to something wacky going on.
x

Call a external SWF by press the button within another SWF file but the second SWF file play Externely

Hello Guyz.
i am working on Macromedia Flash 8 and i just want to call a external SWF when i press the button within another SWF file.......but the second SWF file play Externely............can any one knows the code.... AS2

try this
http://www.actionscript.org/forums/showthread.php3?s=&threadid=28123

Why don't some audio files play back in enhanced iBook?

I recently bought an enhanced iBook in iTunes for my iPad and most of the audio files play. A few do not when I click on them. The player goes blank (disappears) and nothing happens. Does anyone have a solution?

In iTunes, select all the songs/files you want to stay where they are.
Right click - get info.
Tick *Remember position* and set it Yes.
You can do individual songs or a bunch at once.

Random audio file playing

Hi! I've been having random audio files playing on my RAZR. It sounds like a video that automatically starts playing on websites. However, I'm not on the browser, have windows open, or even using the phone. I unlock the phone and there's nothing in the notification bar. No apps are open on the home screen.
My Alarm Clock Plus app will sometimes play an alarm after I've turned it off. Because there's nothing in the notification bar to stop the music, I have to shut down my phone to stop it. This may be an app bug but has anyone had random audio files playing?

Hi Es80
It sounds like that phone is possessed! Let's get this fixed! It sounds like it may be an application error. Please power the device on in safe mode and retest. Here's how:http://bit.ly/QfA8MZ
Please let me know if the issues persists.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

How do I make 1 video file play alone or as part of a sequence of videos

how do I make 1 video file play alone or as part of a sequence of videos and only have it on the disc once.
My problem is that I am short of space on my disc due to the amount of content, and all of the files appear separately on the menu to play invividualy, but i would like to have a play all function aswell without putting the files on the disc twicew. Am I being an idiot? Is this easy to solve?

Take a look at "stories" in the manual.

CS4 premiere Imported .avi files play too fast

Hi Guys
I have a problem. I'm new to CS4 having used Adobe Premiere 6.0 in the past and I have never had this issue when importing .AVI files. What happens is that the file play fine in my windows enviroment and on all my players VLC,DIVX, Windows media player.
But as soon as I import these files into my project at 29.97 frames the video plays really really fast and the sound plays at the normal rate. If I try to change the frame rate the sound also changes. Now here is the strange part. If I convert the files to MP4 they play fine! but the quailty of the video takes a massive hit as you know.
I tried to convert the files to .MOV, MPG (which the program won't play) and most other types of video files but MP4 seems to be the only one that works! When I really want the higher quailty .AVI. Again the files play fine outside of CS4 Premiere and I have already converted them from a Panasonic AVCHD encode format.
Please if anyone has any advise it would be great as I have to get this sorted for a x-mas present!
Richard
Running
Windows Vista Ulimate
4GB RAM
Quad core Intel chip
CS4 version 4.1.0

First, work through all of the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of that link
PS you are in the wrong forum http://forums.adobe.com/community/premiere/premierepro_current

Captivate created file playing with time delay

I have an issue with some machines in the Company where Adobe Captivate files are not playing as created via Flash Player ie where a slide should move onto another slide after a 3 seconds interval , this interval takes over 15 seconds.
I am not getting any error messages and the files play as required but with the serious time delay between slides.
The files created from Captivate are exe files.
The strange thing is that this issue only occurs in some machines in the Company and I am unable to determine a pattern as to this issue.
I have updated the Codec driver and the Graphic drivers on the affected machine but did not solve the issue.
I have tested an affected file on 2 of the same model machines (HP Desktop machines) both running Windows XP SP3 with Adobe Flash Player 10.3 and IE8.0 .
The file played successfully on one of the machines but on the other machine there was a 10 second time lag between slides.
I have checked Task Manager and the process is only using 2-3% of the CPU so the machine has enough CPU to run the file .
I updated to Flash 11.1 on one of the machines and IE 9 but still encountered the same issue.
I have disabled the Anti Virus software (McAfee) while testing on one of the affected machines and this did not solve the issue.
All Machines have the latest approved Microsoft updates installed as required.
The files are created using Adobe Captivate 3 and are stored locally on the affected machines
The files created were created in captivate with a standard 30 fps option
Can you please advise on this issue

Welcome to our community
As I understand things, when you launch an EXE file created by Captivate, it decompresses and temporarily installs a runtime version of the Flash Player. So I'm wondering if perhaps on these machines where the delay is occurring, if it would help to perform the following steps:
1. Clear all temporary files
2. Perform a defragmentation of the hard drive
I'd try step one first and see if anything improves. Perhaps that's all that is needed. The second step is simply a good habit to get into.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop.

HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop. I have made sure that the latest sound driver is installed and this makes no difference. The laptop is new so there is no other software on it other than the pre-installed stuff operating on windows 7. In sound options all looks well and the device is said to be working properly. Even the sound test in device manager sometimes works and sometimes doesnt.

karl6792 wrote:
HP G56 intermittent sound problem - e.g you tube/MP3 files play for 10 seconds then stop. I have made sure that the latest sound driver is installed and this makes no difference. The laptop is new so there is no other software on it other than the pre-installed stuff operating on windows 7. In sound options all looks well and the device is said to be working properly. Even the sound test in device manager sometimes works and sometimes doesnt.

Files play in iPod_Control but skip once coppied to computer

'm running 10.4.10. iTunes cannot read the data off of my iPod. However, I do not have the music backed up anywhere else and so it's imperative that I recover it. I've made the iPod_Control directory visable via the setfile -a v command. The music is playable from the iPod via the preview option in Finder. However, when I copy the music to the computer, it's not playable by iTunes, quicktime VLC etc. If I drag the file directly to iTunes, the file will play, but it is fragmented, skips. The file plays fine while on the iPod, but something happens to it when it's copied from it. Please help me, I couldn't stand to loose all 50 GBs!

I'm having the same trouble too. Sometimes when it does connect it wipes the iPod. The only way I can get songs on there is to plug in the iPod when the computer is off and then turn it on. But it still isn't working properly and does still freeze if I do this sometimes.

File plays in fastforward

Similar Messages

Maybe you are looking for