File property - "do not send (ignore) subscription event"?

Hi experts!
Do you know a property/solution to setup a file inside a subscription structure that will be ignored from the subscription-service?
e.g. I have a folder "test" with subscription (every event, all objects) enabled, inside this folder I've got one file "donotsendnotification.txt", which should be ignored from the subscription service... is this possible?
Thanks for your hints and ideas, have a great week.
Cheers, Benny

Hi,
Yes, you can do.
Select ur file, Goto Details>Settings>Subscription-->Cancel Subscription and save it.
More info
http://help.sap.com/saphelp_nw04/helpdata/en/6e/798e04b33b11d5993800508b6b8b11/frameset.htm
Regards,
Senthil K.

Similar Messages

IPad will not send new Calendar events to MobileMe

My iPad will not send new or edited changes to MobileMe.
I have turned off syncing through iTunes to prevent multiple listings of the same event. When I add or change an event on my computer it is changed on my iPad thru MobileMe without any problems, but when I change or add an event on my iPad it is not sent back to MobileMe or to my computer.
(in Settings, Push is set to 'on' on the iPad)
How do I fix this?

daleq1,
Is your iPad updated to IOS 4.2, or later?
You may have to turn Calendars off/then back on. Apple - MobileMe - Set Up MobileMe
Make sure that you do not choose to remove any calendars from your iPad when turning it off. When turning it back on be sure to choose "Merge with MobileMe" to ensure that you do not lose any calendar data which has been already entered on you iPad.

ICal will not send email of event

When I create an event in iCal, and I add invitees, iCal will not send an email to the specified people. This only happened after I updated to Mountain Lion. Starting to get frustrating.

Greetings w0lverin3,
It seems you are not receiving alerts while using the Calendar app on your Mac. The following article provides some steps that may help you find a resolution:
Calendar (Yosemite): If you’re not receiving alerts
If you’re not receiving Calendar alerts
If you set an alert to occur before a Calendar event but aren’t receiving the alert in Notification Center, there are several possible solutions.
Make sure alerts aren’t turned off in Calendar preferences. Choose Calendar > Preferences, click Alerts, then deselect “Turn off shared calendar messages in Notification Center” and “Turn off invitation messages in Notification Center.”
Make sure alerts aren’t turned off in Notifications preferences. Choose Apple menu > System Preferences, click Notifications, click Calendar, then make sure None isn’t selected as the alert style.
Make sure Do Not Disturb isn’t turned on in Notification preferences. Choose Apple menu > System Preferences, click Notifications, click Do Not Disturb, then make sure Do Not Disturb is not set to turn on when you want to receive alerts.
Make sure you set up the alert properly. See Set event alerts and receive notifications.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

"Delete and Empty" not sending a CMDID_DELETE event

I'm writing a pretty simple C3PO to do some integration. If a user
opens an email and selects delete, I get the eGW_CMDID_DELETE event,
which is great. However if they select "delete and empty" I don't get
the event. I'm staring at the list of events in the C3PO docs and I
can't figure out what other event I might get.
Anyone know what event I should register for in order to handle the
"delete and empty" command?
Thanks,
James
System specs:
Windows XP
C++ C3PO
Groupwise 6.5.4

Just to update my question with a bit more data... I decided to
register for every event listed in the C3PO documentation. Turns out
that "delete and empty" doesn't send me any events at all (I put a
breakpoint in CCommandFactory::WantCommand and it was never touched). I
would definitely appreciate any info anyone has on this. Specifically
some info on a fix or workaround.
Thanks,
James
James Wells wrote:
> I'm writing a pretty simple C3PO to do some integration. If a user
> opens an email and selects delete, I get the eGW_CMDID_DELETE event,
> which is great. However if they select "delete and empty" I don't get
> the event. I'm staring at the list of events in the C3PO docs and I
> can't figure out what other event I might get.
>
> Anyone know what event I should register for in order to handle the
> "delete and empty" command?
>
> Thanks,
> James
>
> System specs:
> Windows XP
> C++ C3PO
> Groupwise 6.5.4

Send.Asp File error does not send html form

Hi,
on my site I have a "contact us" page that contains an html form which I would like to be sent to a specific email once the user clicks on "send".
I'm trying to do so with POST action connected to send.ASP file. but I keep getting this erro:
CDO.Message.1 error '800401e4'
Invalid syntax
/send.asp, line 15
Here is the Send.ASP code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Message from site"
myMail.From="[email protected]"
myMail.To="[email protected]"
myMail.CreateMHTMLBody "Name: " + Request.Form("Name") + " tel no: " + Request.Form("Tel_code") + Request.Form("Tel") + " Cell no: " + Request.Form("Cell_code") + Request.Form("Cell") + " Email: " + Request.Form("Email") + " Subject: " + Request.Form("Subject") + " message: " + Request.Form("Substence")
myMail.Send
set myMail=nothing
%>
</body>
</html>
here is my html form code:
שם פרטי ומשפחה
דואר אלקטרוני
טלפון
02
03
04
08
073
077
נייד
052
054
057
נושא
תוכן ההודעה

Hi,
on my site I have a "contact us" page that contains an html form which I would like to be sent to a specific email once the user clicks on "send".
I'm trying to do so with POST action connected to send.ASP file. but I keep getting this erro:
CDO.Message.1 error '800401e4'
Invalid syntax
/send.asp, line 15
Here is the Send.ASP code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Message from site"
myMail.From="[email protected]"
myMail.To="[email protected]"
myMail.CreateMHTMLBody "Name: " + Request.Form("Name") + " tel no: " + Request.Form("Tel_code") + Request.Form("Tel") + " Cell no: " + Request.Form("Cell_code") + Request.Form("Cell") + " Email: " + Request.Form("Email") + " Subject: " + Request.Form("Subject") + " message: " + Request.Form("Substence")
myMail.Send
set myMail=nothing
%>
</body>
</html>
here is my html form code:
שם פרטי ומשפחה
דואר אלקטרוני
טלפון
02
03
04
08
073
077
נייד
052
054
057
נושא
תוכן ההודעה

Why is IMAQdx property node not sending/receiving? Please take a look!

Hi!
Im trying to control FPS but with no result. Whats wrong with this code?
thanks!
Attachments:
pic.JPG ‏95 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

TS3276 when I re-send an e-mail with an attachment it does not send the attachment just the name of the file what can I do to have it re sent complete??? thanks

Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks

In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu.

Call using Skype Dial pad is not sending outgoing ...

Hello,
We are using Desktop API’s to get the events from Skype to our application. When we are doing an outgoing call using Skype dial pad, we are not getting an outgoing call event from Skype in our application.
But when we do call from skype contact list we are able to get outgoing call event and process it.
Is there known issue with dialing with Dial pad does not send outgoing call event?
//Sanju

Fixed my own problem, IT was my Host file under Windows>System32>drivers>ectThe file was made in such a way that I did not relize I chound't edit it with Notepad without permissions. Also I don't remember adding anything to it, oh well. Long story short, if any of you internet searches want my advice on what to do. Copy the entries in your host file maded by programs "Example: Uncheacky and SpyBot (It will be listed which ones are made by who)." Copy wanted entries to a regular text file on your desktop. Delete your real host file in the director above, deal with readding your wanted entries latter and enjoy talking to your friends again.

Firefox does not send a crash report.

Mac OS 10.6.3 Firefox 3.6.7
Firefox does not send an error report after it crashes. It crashes consistently when accessing certain pages when Shockwave Flash 10.1 r53 10.1.53.64 is enabled, but never sends a crash report.
== This happened ==
Every time Firefox opened
== I noticed the problem in early July 2010 after upgrading Shockwave.

More information:
Firefox produces a crash file, but does not send it.
There are 19 July 2010 reports in /Users/me/Library/Logs/DiagnosticReports/ including 5 from today.
A plist file was created or modified at the same time that the as the last crash report. It contains OS and Firefox versions.
The directory /Users/tvd/Library/Application Support/Firefox/Crash Reports/pending is empty. The permission are 700. I am the owner.
The last report submitted was Mar 4, 2010:
tail -1 /Users/me/Library/Application\ Support/Firefox/Crash\ Reports/submit.log
[Thu Mar 4 22:03:14 2010] Crash report submitted successfully

Why can I not send a file?

I signed in but can not send my document without upgrading. I've paid thru September. any suggestions?@@

I received the following last year and then renewed.
Dear Marcia Cuttler,
Thank you for purchasing a subscription for <https://sendnow.acrobat.com/SignIn.html> Adobe SendNow.
<https://sendnow.acrobat.com/SignIn.html> Get started now >
With SendNow Plus, you can:
checkmark Know when files are downloaded
checkmark Add a logo to personalize what recipients see
checkmark Send files up to 2GB with confidence
checkmark Set time limits on file downloads
checkmark Convert files to PDF before sending
checkmark Store 4 times more files than with SendNow Basic
Customer Support
With your Adobe SendNow subscription you can also receive premium 1-on-1 phone/chat support. Get help from Adobe on the <https://www.acrobat.com/sendnow/en/faq.html> Support Center.
<https://www.adobe.com/go/sendnow_welcome_survey_plus> Rate your Experience with SendNow >
"Adobe, and the Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are property of their respective owners."
<https://acrobat.com/redir/tou_acrobatcom> Terms of Use | <https://acrobat.com/redir/privacy> Privacy Policy
Send and track large files online with confidence using <https://sendnow.adobe.com> Adobe SendNow ( <https://sendnow.adobe.com> https://sendnow.adobe.com)
© 2013 Adobe Systems Incorporated. All rights reserved. 345 Park Avenue, San Jose, CA 95110 USA

ICal server not sending events older than 10 days

Have just discovered an issue with our iCal Server that I hope someone can help me resolve. It seems that sometime in the last few days, or past week. the iCal Server (running on a Snow Leopard Server 10.6.8 setup) has stopped sending out any events older than 10 or so days for 6 of the 7 calendar calDAV accounts that we all subscribe too. All future events on each calendar appear to be visible. The situation is consistent across of all of our Desktop's, MacBook Pro's and iPhone's so it is not localized to any single machine. It is also consistent when I subscribed through a third party calnedar application (BusyCal).
I have gone into the ~/Library/CalendarServer/Documents and although I could not access the folders directly, I did copy the folder and its contents to another hard drive where I was able to view what was inside. It appears that all of the individual event .ics files for each account are in their respective subfolders, but they are not being served out to the subscribers.
Any ideas on how to get these older events to become visible again would be very much appreciated. I am not very well versed on this type of thing and am learning on the fly.
Shawn

I'm having this same issue and I'm really ticked off.
When I upgraded today, I received a message saying that because I had so many events in the past that it would take longer to upgrade everything. It said that all my current and future events had been updated, but the past events would be available in 1 hour. Well, it's been a lot of 1 hours since then and nothing. All my events have been deleted from my MacPro, MacBook Pros, and iPhone. I'm holding out hope for them to reappear in the morning.
I know this isn't part of this thread, but I thought I'd throw it out anyway. Why are my subscribed calendars NOT visible online. Apple made an announcement in the past celebrating the ability to view subscribed calendars online when they once could not. Now with a new ADVANCEMENT, we've regressed and I cannot view subscribed calendars online. I hate to break it to Apple, but I use these subscribed calendars in my scheduling and planning, too. I still need to see them online just as I do on my computer and phone. So with all the updating and wonderful features, the lack of this one makes MobileMe online calendars useless to me and others.
One step forward, two steps back.

FCC Send File Adapter - missingLastFields not working

Hi
I have a flat file to capture using the sender File adapter
Parameter as follows:
Header_fieldNames : Key,Name,StaffID,Telephone
Header_fieldFixedLengths : 2,12,10,8
Header_endSeparator : 'nl'
Line_fieldNames : Key,Address,Company,LineText
Line_fieldFixedLengths : 2,20,20,40
However there are times where last field come in missing.
Hence I use the Header_missingLastFields : error
                          Line_missingLastFields : error
However it does not seem to be working as the adapter fails to pick the file from the FTP folder
but if I replace error with ignore, the sender adapter picked the files and process and send to the receiver adapter.
I need to flagged error in sxmb_moni if last field or last few fields are missing....any advise how could this be achieve ?
Regards
Fred

Hi Freddy,
I think you might like to specify missingLastFields = add. then it will add the missing fields as empty. you can further check if these are empty in mapping and then fail the message or create an alert.
If you specify "ignore" then you will not get those fields in your structure and if you specify "error" then the file will not be picked up.
have a look here
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
missingLastfields
If the inbound structure has less fields than specified in the configuration then the XML outbound structure is created as follows:
○       ignore
Outbound structure only contains the fields in the inbound structure
○       add
Outbound structure contains all fields from the configuration; the fields missing in the inbound structure are empty.
○       error
Conversion is terminated due to the incomplete inbound structure. An error message is displayed
regards,
francis

How can I send a file that CAN NOT be printed or saved by the recipient?

How can I send a file that CAN NOT be printed or saved by the recipient?

Impossible. PDF files don't stream, so they cannot be opened until they've been saved.
You can truly prevent printing by using DRM, or ask nicely by using a permissions password (though that's ignored by non-Adobe software).

Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured

Today I tried to configure JAVA APM on a CentOS 6.4 server with tomcat6 installed through the normal RPM package. Adding this server to SCOM was no problem and it shows itself as a 'Deep Monitored Configuration'. The last part of enabling
JAVA APM fails. I have followed the following process:
1. Imported the JAVA APM MP's
2. Extracted the JAVA APM Files
3. Copied those files to my CentOS server
4. Added the JAVA_OPTS to my tomcat configuration file
5. Restarted Tomcat
When I look for the log file which needs to be created through the installation of the APM agent it cannot be find. When I look into my Catalina.out file I see the following errors:
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
com.microsoft.ManagementServices.APMAgent.Exception.ApmException: SEAgent.config.xml does not have a valid event sender configured
 at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
 at java.lang.reflect.Method.invoke(Method.java:601)
 at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
 at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
 ... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
 at java.lang.reflect.Method.invoke(Method.java:601)
 at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
 at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
 ... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
 ... 19 more
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
java.lang.reflect.InvocationTargetException
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
 at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
 at java.lang.reflect.Method.invoke(Method.java:601)
 at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
 at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.InstantiationException: Monitor initialization failed: SEAgent.config.xml does not have a valid event sender configured
 at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
 ... 12 more
Does anyone have seen this error before? Can someone help me with this one?
Thnx,

I'm running tomcat on a CentOS release 6.4 (Final) server. I installed Tomcat 6 through an RPM from the CentOS sources. I have installed Apache Tomcat/6.0.24 wit JVM version 1.7.0_09-icedtea-mockbuild_2013_01_16_18_52-b00, the JVM Vendor is Oracle Corporation.
My tomcat configuration needs to be done in '/etc/tomcat6/tomcat6.conf'
I installed the APM Agent in the path '/opt/apm/' with the rights 40755 (root/root). The files have the following rights:
-rw-rw-r-- 1 root tomcat 32046 Mar 3 15:38 apm_facade.jar
-rw-rw-r-- 1 root tomcat 244819 Mar 3 15:38 apm_monitor.jar
-rw-rw-r-- 1 root tomcat 38110 Mar 3 15:38 apm_producers.jar
-rw-rw-r-- 1 root tomcat 207006 Mar 3 15:38 asm-all-3.3.1.jar
-rw-rw-r-- 1 root tomcat 4157 Mar 3 15:38 ASM_Third_Party_Notices.txt
-rw-rw-r-- 1 root tomcat 241368 Mar 3 15:38 DispatcherStub.dll
-rw-rw-r-- 1 root tomcat 36880 Mar 3 15:38 pmonitor.config.xml
-rw-rw-r-- 1 root tomcat 2625 Mar 3 15:38 SEAgent.config.xml
-rw-rw-r-- 1 root tomcat 830 Mar 5 15:19 Starter.properties
The above rights are equal to the /etc/tomcat6 directory with the tomcat configuration files.
In the tomcat6.conf I have added the following entries:
#Microsoft SCOM APM
JAVA_OPTS="${JAVA_OPTS} -Djava.library.path=/opt/apm"
JAVA_OPTS="${JAVA_OPTS} -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar"
When I look into the running tomcat process I see the following:
tomcat 17401 1 0 Mar05 ? 00:00:39 /usr/lib/jvm/jre/bin/java -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar
-Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar -Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory
-classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp
-Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start
My Starter.Properties looks like this:
# Jars to load by inner classloader.
# Use semicolons to separate the JAR entries
ClassPath=apm_monitor.jar;asm-all-3.3.1.jar;apm_producers.jar
# Path to pmonitor.config
MonitorConfigFileName=pmonitor.config.xml
# Path to SEAgent.config
AgentConfigFileName=SEAgent.config.xml
# Log file name
# Example for full-path location:
# LogFileName=c:\\tracelog\\apm-java-agent.log
# Example for relative path (to agent jar files):
# LogFileName=apm-java-agent.log
LogFileName=apm-java-agent.log
# Log level (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST)
# A level of FINER or FINEST may expose Personally identifiable
# information (PII) in the log file. The levels below INFO are
# intended for debugging and diagnostic use only.
LogLevel=FINEST
The 'apm-java-agent.log' is not created on the system. The only logging is done in the catalina.out. When restarting tomcat I see the following entries in te log file:
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading succeeded (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger warning
WARNING: Failed registering the COUNTER MBean
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Hope this gives your some more background around my problem, I double checked the permissions..

The File name property is not valid. The file name is a device or contains invalid characters

I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing.
Issue:
The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination.
The path and name of the raw file is passed to each of the data flows via the same variable.
The raw file resides in a folder on the server in the same path that the dtsx resides in.
The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
What we have done to troubleshoot:
1. I ran the task successfully on my local machine so it is definitely a server issue.
2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always".
3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
6. The dba looked at the directory and the account that performs the task has full control.
7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
Summary:
The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

Hi Whalensdad,
Based on my research, the issue can be caused by the following reasons:
There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
May be it changes to others at run time.
The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

File property - "do not send (ignore) subscription event"?

Similar Messages

Maybe you are looking for