File-proxy-file

hi friends,
scnario is file to proxy and proxy responce to a responce file.
now is it possibl with out bpm. and i have given a bapi at server side how to make use of it in updating and getting responce..
Regards
Vijay

Hi vijaya,
I have refered the blog.. i have a doubt in it please clear ..
This is where a few differences lie, so let me take some time.
1. The Receiver Determination , Interface Determination will be the same as in HTTP - RFC synch scenario. Create the Sender File Adapter, Receiver RFC Adapter and Receiver File Adapter.
in this step from filesender to rfc
and filesender to filereceiver
rfc to filereceiver
i need more clear how to createt this objects Receiver Determination and Interface Determination please clarify this two..
in my case i have 2 Message interface objects..is it enoufgh and required more...
Regards
vijay

Similar Messages

IIS Proxy SAR file needed

Hi all:
   I would like to implement the IIS Proxy SSO solution. Is there anybody can send me the IIS Proxy SAR file ?
   I cannot find it in service.sap.com/patches
   my mail : [email protected]
   I will give you the reward points.
   thanks.

Hi,
To my knowledge IISProxy is not supported/delivered by SAP anymore. See the OSS note 886214 for details. You can use WebDispatcher as reverse proxy and SPNego for SSO authentication. They are supposed to be replacements for what you could do with IISProxy.
So I doubt you will find IIS Proxy inside Service Marketplace. Doesn't mean that you cannot get it anywhere else though.
Regards,
Mike

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

My proxy service (messaging) with sftp protocol is not picking up the file

Hi ,
I have proxy service , which polls for a file in a regular interval , this has stopped working suddenly . The bad part is i am not able to find any log related to the service in either the domain logs or the server logs.
I tried to disable the service and re-enable it , but it was of no use .
Please help me in this , what can i look for next ?

Bala,
I just extracted the entire B2B setup as a ZIP file and imported the setup in a DEV UT01 enironment. The B2B was able to successfully pick up the B2B messages using the same ftp channel.If from one env B2B is able to pick the message using same settings then it must be a network issue. You may like to change the B2B log level to debug and then try to disable and enable the channel. See if you get anything in the log.
You may also try to create an outbound agreement and see if you are able to send message to that FTP location from the same environment.
Regards,
Anuj

Adobe Reader 9.0 has delay when downloading PDF file through proxy server

There is an issue with the Adobe Reader (and Acrobat) 9.0 PDF Link Helper ActiveX control for Internet Explorer (6 or 7) on Windows computers with respect to proxy servers. Due to this issue, there is a 2 minute delay for any Internet Explorer web browser on the Deere network before any PDF file will open from the Internet within the IE web browser if In-Place activation (Display PDF in Browser) is enabled in Adobe Reader 9. This problem does not affect Adobe Reader 8.
What we are seeing is that when someone on the Deere network clicks on a links to a PDF file in the Internet, the PDF file downloads immediately. But then, after the PDF file is downloaded, the Adobe Reader 9 PDF Link Helper ActiveX control tries to talk directly to the Internet web site. The Adobe Reader 9 PDF Link Helper ActiveX control does not know how to negotiate our proxy server. So after a minute or two, the Adobe Reader 9 PDF Link Helper ActiveX control times out (gives up) and allows the IE browser to display the downloaded PDF file in the IE browser.
We work around this issue by disabling In Place Activation for PDF files in IE (uncheck Display PDF in Browser). But we would like a fix for the PDF Link Helper ActiveX control.
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals]
"bBrowserIntegration"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Originals]
"bBrowserIntegration"=dword:00000000
Here's what our proxy people see when they do a trace of a PDF file download through their proxy server with IE 7 and Adobe Reader 9 with Display PDF in Browser checked.
The browser tells the proxy to download the pdf, it does and sends it to the browser. Before the browser opens it something in Acrobat ( or I.E. ? ) tries to make a connection back to the content server that hosted the pdf. Unfortunately this agent does not ask the proxy to make the request for it, but rather asks local DNS to resolve the Internet server name. This request dies because our internal private network does not know anything about the Internet. Only the DNS used by the proxy can resolve Interent names. After two unsuccessful DNS queries into the private network, the agent tries to resolve the same Internet name with NBNS ( netbios name service) queries again into the private network, with the same results. These requests persists for more than two minutes ( over 200 unresolved queries ). Then for whatever reason the agent gives up and the already downloaded pdf file loads into the browser.
I have a TCP capture file if you want it.

Hi,
I have the same problem with some specific PDF files. For more than 90% it hangs when opening the file, but sometimes it works (with the same file).
The workflows where it sometimes worked:
a) Loading the PDF, the reader is started the first time and displays license dialog.
b) The reader was already runing and file is loaded with Drag&Drop or File/Open in the Reader
But most times it does not load.
I could not find out which file is missing or trying to be opened. So I tried with the CP949.TXT.
I found no CP949.TXT in Reader 8 installation, so I took it from the link, pasted into notepad and stored in the respective directory
C:\Program Files (x86)\Adobe\Reader 9.0\Resource\TypeSupport\Unicode\Mappings\win\
Now it seems to work fine, opening PDFs with double click from exporer.
But why did Adobe Reader 8 not have the TypeSupport directory at all?
Even when having found a fix (hack?), I think I did not understand the cause of this problem.
Regards,
TheLastReader

Manage multiple versions(ID CS,CS2,CS3,CS4) of INDD files Indesign proxy for PC

Dear scripters,
I have multiple version of ID installed in my system. I have ID CS,CS2,CS3 and CS4. While I am opening (double click) the ID CS file, automatically the file opening in CS4. For solving this problem I have searched in the forums I found there is a program called INDESIGN PROXY for MAC OSX. It manages the problems well.
Now I am in the process of developing the application same like that for windows using VB. Here is my observation about Indesign proxy.
1. While user double clicks the Indesign file the argument is not passing to the Indesign.exe, but the argument passes to the Indesign proxy. Something like this
"C:\Program Files\Adobe\Adobe InDesign CS4\InDesign.exe" "%1"
to this
"C:\Program Files\IDproxy\proxy.exe" "%1"
2. The proxy exe lists all the version of IDs in a dialog box. If user selects CS2, the proxy exe passes the command argument something like this
"C:\Program Files\Adobe\Adobe InDesign CS2\InDesign.exe" "%1"
3. Now the file will open in correct version.
I am comfort with VB forums and coding but I am struck getting the file path while user double click's the file. I short need to get the file path of "%1" argument.
I think I am detailed.
Kindly advice me how can I proceed more?
Thanks
regards
a r u l
vpublish.net

I don't think it's a mistake.
"InDesign CS4 (3.0)"
means: this is the OM for InDesign 3.0 (i.e., InDesign CS) that is contained in InDesign CS4.
Wait -- do you mean there might be a difference between "the OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS4" and, say, "OM for InDesign 4.0 (i.e., InDesign CS2) that is contained in InDesign CS5" ?
Why on earth would anyone need that? I imagine it's not because even with versioning the 'older' scripts may not behave the same -- there must be dozens of mails about versioning not working ... I mean, if Adobe knows what causes older scripts to stop working (because, if I understand you correctly, they retroactively change it in the documentation for older versions), wouldn't it be yet easier to not cause those changes?

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

How to use a file transport proxy service as trigger for a webservice

Hi,
I've implemented a alsb file transport proxy service. This proxy is watching a common directory and detects new files. After detection, the proxy move them in an archive folder.
After that I want call an external webservice with the filename as input parameter.
How can I comfigure that with the alsb console.
best regards
Oliver
with the to extract the filename after it was renamed by the proxy service.

How do you invoke/ instantiate the file based proxy service. Does it just run on activation in sb console? Does it continue to detect files or does it stop after detecting one file?
Also what is the format of the URL that points to the file folder.
For Ex: I have a folder named "TestFiles" on the C:\drive of the server.
Edited by premkumr at 10/31/2007 3:26 PM

How to track return message in file to proxy interface

I am using file to proxy scenerio, where i will get my file from FTP and updating it into a table , after updating i am calling a program to Run BDC, in my method for proxy, after that i dont how to track return message , anyone please tell me suggestion regarding for this
thanking you
Sridhar

Hi Sridhar,
What exactly you want to track????
my assumtion is the call will be of asyn mode, once the data reach the proxy method the XI job done and u can easly track that using monitoring.
Regards,
Phani

How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

Hello,
Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
But it didn't help me.
Regards,
Erik van Lisdonk

U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
SFTP vs. FTPS in SAP PI
Regards,
Prateek

BPM file to ABAP proxy

HI all
I´m developing a BPM, this has the following steps:
1º
Reciver Step: this is to read a file , comunication channel type file.
2º transformation Step: maps the MT of the file to a new MT
3º Send step: send syncronously the result of the the map.Using an ABAP proxy. XI adapter.
4ºSwitch step: compares de the value of the result of the syncronous call, with a constant.First branch Send Step to write a file
Second branch nothing.
My question is? Do i have to insert something before the switch. Because i cannot activate the BPM, In the SXI_CACHE i can see and error that says that the value that i´m using to compare the value it is not an object of the payload.
Any idea?
Many thanks
Noelia

Hi,
Last try...
salida_proxy./p1:MT_salidaproxy/row/valor = 0
In the condition editor:
When you do a f4 for the left operanfd text box:
The expression editor opens:
You need to click on the "Interface Variable" radio button and select your container salida_proxy and prove the correct xpath.
Make sure that the Type specified next to the xpath in the expression editor is String.
A f4 in the right operand text box opens a expression ediote, where:
You need to click on the constant radio button, and provide the constant 0.
Again make sure that the xsd trype is String.
In case all this has been done perfectly, then try deleting the switch and recreating it again. You never know, this might do the trick!
Regards,
Smitha.
Message was edited by:
Smitha Rao

Getting error when testing Proxy to File interface

Hi Guru's,
While I am testing a Proxy to File Interface, using SPROXY transaction i am sending a message from R/3 to PI.
the message showing successful in R/3 Moni,but in PI moni I am getting the following Error..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In this inreface, I am suppose to send the mesasage to only one Target system(ftp server) . i have checked in ID part also,
every thing is clear in ID. Can any body please tell where the mistake might exists...
Thanks in advance..
Regards
Raj

Hi,
No receiver could be found means Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
have you seen this threads,
NO_RECEIVER_CASE_ASYNC
No receiver could be determined
regards,
ganesh.

Problem creating a web service PROXY from a wsdl file/URL

Hi,
I am experiencing problems when I want to import a WSDL file for creating a proxy object.
When I import the WSDL file from URL I get an error like this: <b>404 Not Found
The requested resource does not exist.</b>
Then, I try to create it from a file, but I get other error:
<b>Document not found (path o:\BCS.WSDL, error code 7</b>
The error code 7 indicates <b>unknown error</b>
Any help?.
thanks in advance.
Eduardo.

Hi,
I've done the same from other ECC6.0 System and everything was working perfetly, why all this can happen?
I've ckecked the activation of the proxy objects, traces, etc... and it's the same in both systems, what more should i check?
Thanks in adavance.

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

File to Proxy Scenario using ABAP Class and DB Multi Connect

Hello Friends,
I have a scenario below and a proposed solution. I would like some input as to whether i am headed the right way.
Scenario: Thousands of records come in from the legacy accounting system. The fields of these records need to be mapped to SAP fields using cross-reference tables stored in DB2. Finally, summarize the records by deleting a few fields and feed to R/3.
Solution i proposed:
(1) File Adapter is used to send the file
(2) Although JDBC adapter comes first to mind but since i need to access the DB2 tables multiple times for each record i propose to use an ABAP class for the mapping. Within the ABAP class the intent is to open an database connection to DB2, read the relevant cross tables using native SQL and finally generate the output XML.
(3) Reciever is Proxy which feeds this generated XML to SAP for creating posting via BAPI_ACC_DOCUMENT_POST
Question: Is the above solution correct or is there a better method to implement this scenario?
Please let me know.
Thanks,
Minhaj.

Looks fine. Few observations -
1. Whether it is ABAP class or Mapping in RFC lookup, you are making multiple trips to the database.
2. It looks like PI is being used only for reading the file and converting it to XML.
3. If using PI is not mandatory, then a complete ABAP class on ECC it self would be faster than swtching between PI Java, PI ABAP then round trips to DB2 finally data push to ECC.
If you could look at something like fetching all the required RFC look up data in one go and then map the fields according, might save u on processor and network resources.
VJ

How to control File read Proxy Service when it is polling from folder?

Hello all,
In my current requirement we are receiving xml's through one folder(LOCAL) from source side.we are picking those xml's by proxy service PS1 as file transport for every 10 sec and configured that folder path.In PS1 message flow we put on routing action to one bussiness service,that business service sending those xml's to one MQ.
We already created this interface but the issue is source side they plan to change that folder and also they want to stop this service(folder to MQ) sometimes based on synarios.That folder will be delete or if exist proxy wont read messages from that folder.
But proxy is still looking for that folder in Test ENV on Unix system then it gives error beacuse of unix folder structure is different,proxy unable to create that folder in unix system.it is creating in windows.
Now we want to control that service when the folder is ready that time only proxy will activate otherwise not..i.e like if condition "if cndtion is satisfied PS1 starts the polling from that folder else condition should be work.
How can i control PS1 service?
Is there any chance to control by using another proxy?
Experts please guide me..
regards
venu

Hi Terry,
According to your description, my understanding is that you don’t want the yollow bar notification to display when you open Access documents.
This issue seems to be about the client application. Please compare the followings with the things that you did:
1.Open the documents
2.Click File->Options->Trust Center->Trust Center Settings
3.Click Protected View, unselect ‘Enable Protected View for originating from the Internet’
4.Click Message Bar, select ‘Never show information about blocked content’
5.Click Macro Settings, select ‘Disable all macros without notification’
In addition, as this issue is about Office, I commend you create a new thread in Office forum, more experts will assist you with this issue.
Office forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=officeitpro
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

File-proxy-file

Similar Messages

Maybe you are looking for