File recevier content conversion - 2 header lines

Hi all,
I have a receiver setup to append a csv file on ftp server with new data. The problem is that customer asked me to have 2 header lines on top of that file. According to receiver conversion parameters I can setup a headerLine parameter for my adapter, but only with one line. Is there any workaround for this solution? I cant put this header lines in mapping because I am appending or at least I do not know how to setup receiver adapter to get it done. Any ideas?
br
Dawid

Hey
just change ur message structure to the following
<?xml version="1.0" encoding="utf-8" ?>
<ns2:MaterialMsg xmlns:ns2="http://Workmanager/WorkmanagerPDM">
<Recordset>
   <record>
     <Codice>"11020693"</Codice>
     <Versione>"1"</Versione>
     <Revisione>"-"</Revisione>
     <Revlv>"-"</Revlv>
     <Descizione>"SPRING 4.2X13X0.5X9.5"</Descizione>
     <Nome_classe>"C_PARTICOLARI"</Nome_classe>
     <GenItemCatGrou>"ZERL"</GenItemCatGrou>
</record>
</Recordset>
</ns2:MaterialMsg>
Note:Occurence of <Recordset> is 1-1
and give the same parameters using <Recordset> instead of <record>.
see if i m not wrong the occurence of <record> is 0-unbounded or 1-unbounded.
so it will disply the header each time for every new record.
when u encapsulate the <record> under <Recordset>,then occurence of <Recordset> will be 1-1 and it will be displayed only once
thanx
ahmad

Similar Messages

Receiver file Content Conversion with Header line

Hi,
Here I am doing receiver file content conversion with header line.
I am able to get the output file correct, when I open the file in notepad the header line and data appearing in the same line (not accepted).
But when I tried to open the name file in internet explorer I can see the header line and data in two different lines (accepted).
What should I do I want to see the same output in the notepad?
Please help me out.
Thanks in advance,
Srikanth.

You can use NameA.addHeaderLine.
Specify whether the text file will have a header line with column names. The following values are permitted:
0 u2013 No header line
1 u2013 Header line with column names from the XML document
2 u2013 As for 1, followed by a blank line
3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
4 u2013 As for 3, followed by a blank line
The below weblinks will help you to know the other paramters.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/686e687f2a6d12e10000000a1553f6/content.htm

File Sender Content Conversion: Help needed

Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167     Y010122851 136086 43300007            E70115 1L2_96_1
12329660 25.01.09/07:02 157     Y010122851 136086 43390007            E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
      <Data>
        <field1>12329460</field1>
        <field2>24.01.09/07:01</field2>
        <field3>167</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43300007</field6>
        <field7>E70115</field7>
        <field8>1L2_96_1</field8
     </Data>
      <Data>
        <field1>12329660</field1>
        <field2>25.01.09/07:02</field2>
        <field3>157</field3>
        <field4>Y010122851</field4>
        <field5>136086</field5>
        <field6>43390007</field6>
        <field7>E711J5</field7>
        <field8>1L2_96_1</field8
     </Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris

> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh

...file Sender content conversion 'lastFieldsOptional' error

Hi All,
I am working on a File Sender content conversion--> flat file to XI.
it's fixed length field all the rows with same column.
090627 344535AFDFG+GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG+GBP45434 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG-GBP45434 ASDSSD GFD dFSSGFD 6757532
**EOF**
I am sucessfully able to handle the file if i remove "**EOF*" from incoming file. But i get "lastfieldsOptional" error with "*EOF**"
>
Parameters-
     Recordset Structure - ROW,*
     Recordsets per message - *
    ROW.fieldFixedLengths - 6,8,20,10,30,1,3,1,11,1,11,6,10,10,20,10,10,2,6,6,2,6,6,3
    ROW.fieldNames - INV_DATE,INV_NO,PAYMENT_REF,CUST_NO,CUST_NAME...etc etc
   ignoreRecordsetName - true
There are parameters available to ignore Last field(last column) of a Row/Rocerdset
but how to ignore the last row of the file.
Plz suggest some parameter to ignore the last row/field of the file.
Regs,
Ansh

Ansh,
.lastFieldsOptional is obselete and you cannot use. Please see sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
The best thing comes to my mind is use:
.keepIncompleteFields as YES
Also give a try with:
.missingLastfields as add
So with this I think your last line in the file will read into XI. But the value of last line is **EOF**. So the length is 9. Since your the first two fixed lengths are 6 and 8. You will have these values as ***EOF and ***. So while mapping you can use doesnot satrt with * and map it, so that your last line will be ignored.
Note: with this apporach you have to make sure your first two columns never start with *. If you have a doubt then you can use the condition doesnot equal to ***EOF for first field and doesnot equal to *** for the second field when you map. I hope it makes sense to you.
Regards,
---Satish

Problem in message mapping due to file sender content conversion

Hi all
basically i m using file sender content conversion and couldn't make file in a proper nested structure where weight was the nested field of detail as there is a limitation of content conversion in file adapter:
My file came out like this:
<header>
</header>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<trailer>
</trailer>
and i wanted it like:
<header>
</header>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<trailer>
</trailer>
so now the problem is i want to generate an idoc from it....but theres no way out to determine which weight is related to what detail except that the weight related to detail 1 comes after start and end of detail 1 tag and then weights of second detail comes after start and end of detail 2 tag in my source xml file.
The structure of the target idoc is
<header>
</header>
<Detail>
<Weight>
<flag>D1</flag>
</Weight>
<Weight>
<flag>D1</flag>
</Weight>
</Detail>
<Detail>
<Weight>
<flag>D2</flag>
</Weight>
<Weight>
<flag>D2</flag>
</Weight>
</Detail>
<trailer>
</trailer>
so i was wondering if i can make a user defined function in which i feed detail and weight and result a flag d1/ d2 inside the tag field. My logic is smth like
while detail is 1 make all the tag weights coming after detail 1 inside <detail1> tag then resultlist.CC for context change then while detail is 2 make a loop to fill the weight coming after detail 2 inside the <detail2>
Is this possible by any means. I really need help
Thnks
Naina

Hi
My sender file content conversion have this setting:
HEADER,1,DETAIL,*,Weights,*,TRAILER,*
And plz give me more idea of the adapter module ....is there any blog available which is related to my problem.
Naina

File sender content conversion 0..unbounded does not pull file

i am trying to map a flat file using content conversion to this xml structure:
<Header>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_date/>
<File_time/>
<Heb_code/>
<Claim_no/>
<Cont_no/>
<Remark/>
</Header>
<Claim_Header>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<License_no/>
<ODO_meter/>
<Claim_type/>
<VIN_code/>
<Claim_open_date/>
<Claim_fix_date/>
<N_code/>
<C_code/>
<Ejob1/>
<Ejob2/>
<Page_no/>
<Pre_conf_date/>
<Pre_conf_no/>
<Part_buy_date/>
<KM_prev_fix/>
<Bill_prev_fix/>
<Material_fault/>
<Damage_whole/>
<Damage_code/>
<Job_amount/>
<Towing_amount/>
<Parts_amount/>
<Hour_rate/>
<Cont_mark/>
</Claim_Header>
<job_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<shaaton_code/>
<job_finish_code/>
<amount/>
<job_time/>
<row_value/>
<color_code/>
</job_row>
<part_row>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<material_code/>
<amount/>
<unit_price/>
<row_value/>
</part_row>
<remark>
<Field_ID/>
<Filler/>
<Record_type/>
<Vendor_code/>
<Garage_no/>
<Data_code/>
<Year/>
<Job_no/>
<Cont_no/>
<page_no/>
<line_no/>
<remark/>
</remark>
<footer>
<Field_ID/>
<Filler/>
<Record_type/>
<File_name/>
<File_Record_no/>
<Claim_no/>
<Cont_no/>
<Remark/>
</footer>
job_row, part_row and remark are records that occur 0..unbounded.
when i write in recordset structure: Header,1,Claim_Header,1,Job_Row,1,Part_Row,1,Remark,1,Footer,1
and put file with one record each, the file is pulled, but when i change recordset structure to:
Header,1,Claim_Header,1,Job_Row,* ,Part_Row,* ,Remark,*,Footer,1
the file is not pulled.
can anyone tell me what i'm doing wrong?
thanx
Tomer

Hi,
Refer this links for FCC.
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

File sender content conversion

hello
I have a txt file sender content conversion in SAP PI.
I define in the content conversion 6 fields names(field1, field2, field3,field4,field5,field 6) but the fie that I am loading has only three field(field1,field2,field3). the file is still loading though there is a different in the structure between what I define in the PI to what is loading to the PI.
is there a way to send an error with out loading the file?
I read about the count function in the mapping. isnt there a build in function that suppose to load only the structure that is define?
Thanks
Kfir

If you define 6 fields and only 3 are present in the test file then you wont get an error (AFAIK)
However, if you define 3 fields and there are 6 present in the source file then you will get an error saying more number of parameters found.
isnt there a build in function that suppose to load only the structure that is define?
I dont think so....this may however be achieved using a custom adapter module.
Update:
Just remembered that SAP PI (7.1 and above) comes with inbuilt XML-validation function....check if that helps in your design.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 15, 2010 1:12 PM

Challenge in File Sender Content Conversion

Hi,
I have a real challenge concerning File Sender content conversion in SAP XI.
My flat file looks like this:
##H   300
MAR   206
KAS 1
DAT 01.03.08
ART 1.129
KUN 118
EAN 4.499
REL 5.0j 16.05.06
SER             1
##E   300
##H   301
DAT 01.03.08
ZEI 07:54
KAS 1
##E   301
Each row represents a data field and has two values: The first one defines the field name, the second represents the field value. E.g. 'DAT' stands for Date and has the value 01.03.08 in the example.
The fields belonging together in one data set are enclosed by a start qualiefier (##H)and an end qualifier (##E).
The value after these qualifiers (i.e. '300' and '301' in the example above) represent a certain record type, e.g. '300' represents Customer data and '301' represents Account Data.
Is it possible with file content conversion to create the following XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://sap.com/xi/account">
     <300>
          <MAR>206</MAR>
          <KAS>1</KAS>
          <DAT>01.03.08</DAT>
          <ART>1.129</ART>
          <KUN>118</KUN>
          <EAN>4.499</EAN>
          <REL>5.0j 16.05.06</REL>
          <SER>1</SER>
     </300>
     <301>
          <DAT>01.03.08</DAT>
          <ZEI>07:54</ZEI>
          <KAS>1</KAS>
     </301>
</ns0:MT_DATA>
If it is not possible with content conversion, what could be an alternative? Adapter Module? MultiMapping?
I'd really appreciate your input as I am working on this since several days without a solution.
Thanks in advance.
Alex

It is not possible thru adapter..
There is one blog to convert such files to XML sing java mapping. Search for any flat file to Idoc or xml in the forum.
VJ

File Reciever content conversion header line

Hi all,
I want to convert a XML to a CSV-file using file reciever adapter.
Doing this I want to add the
The parameter for content conversion:
recordset: ET_AWB,item
parameter list:
item.addHeaderLine = 1
item.fieldSeparator = ;
ET_AWB.addHeaderLine = 1
ET_AWB.fieldSeparator = nl
The file is created successfully but the header line is not writen. Could it be that the header line is only created if the recordset is a single type?
Can anybody help me?
Thanks a lot!
Florian

HI all,
thanks for the information!
My scenario is a RFC-Message with more than 1 table which is mapped into several RFC-Messages (Message split).
Because I use RFC-functions for mapping I do not want to change the XML because then I would need an own DT/MT.
Probably because the record type is not a single recordset it doesn't function.
Unfortunately also the option from Prakash with explicitely defined header names doesn't function. Has anybody one more idea? Or is this what I want to do impossible?
Thanks a lot!
Florian

Sender FILE Adapater Content Conversion: Header and Item Data

Hi
I need to pick a file and do the content conversion. The XML structure which should be formed should be in the below format. I have a CSV file which needs to be converted.
Kindly suggest how can I maintain parameters for Header and Item level data in Recordset structure.
How can I specify in Recordset parameter which is Header(Customerno, Doc type and Address) and Item level(Line Item) data.
<?xml version="1.0" encoding="UTF-8" ?>
<customernumber></customernumber>
<documenttype></documenttype>
- <Address>
        <name1></name1>
        <name2></name2>
</Address>
- <LineItem>
        <material>100016</material>
        <amount>1000</amount>
</LineItem>

Hi Swetank,
The file after conversion should have one Header and you can have any number of line items.
Once you choose File Content Conversion in the message protocol header while configuring the Sender File Adapter, you get the following enteries in the Content Conversion Parameters:
Document Name
Document Namespace
Document Offset
Recordset Name
Recordset Namespace
Recordset Structure
Recordsets per Message
Key Field Name
To maintain the Header information, Some entries are mandatory, i.e.
Recordset Name: Here please specify the name of the structure. It is included in the XML schema.
Recorset Structure: Here you need to enter the sequence and the number of substructures. Since Header is one but you can have many Line items, you will write:
customernumber,1,documenttype,1,Address,1,LineItem,*
this format is clearly explained in the link provided by Divya.
And in the Additional fields you need to write the name of fields corresponding to different Recorset Structures and also add some property to it, like fixed lengths, use some separators etc.
and Most important field is:
Key Field Name: If you specified a variable number of substructures for Recordset Structure, in other words, at least one substructure has the value *, then the substructures must be identified by the parser from their content. This means that a key field must be set with different constants for the substructures. In this case, you must specify a key field and the field name must occur in all substructures.
Here you need to enter LineItem as it is the only Recordset Structure with an *.
I hope this solves your problem,
Thanks and Regards,
Varun Joshi

Header Name in the output file using content conversion

Dear All,
I want to have a text file with a header in the output. I have given the following values for content conversion:
RecordSet structure = Record,Row
Record.fieldSeparator='nl'
Row.endSeparator='nl'
Row.fieldSeparator=','
Row.addHeaderLine=1
but still I am not getting header in the output file. Please tell me where I am making a mistake in getting the header.
Reg,
NJ

hi chirag,
thnx for replying.
i m getting the required output file without any error but i m not getting header. i hve added "addHeaderLine" parameter in content conversion but still i m not getting header in the output file.
reg,
nj

File-Sender: Probl. with Content conversion - Read whole line in singleTag

Hello,
I have a flat file that i read with the sender file adapter.
After content conversion I get not the result i wished to have...
The source flat file looks for example like this:
ABC;DEF;GHIJ
KLM;NOP;Q
RSTU;VW
After the Content Conversion I would like to have this result:
<Recordset>
     <Data>
          <Row>ABC;DEF;GHIJ
           <Row>KLM;NOP;Q
          <Row>RSTU;VW
          <>
What sounds very similar but didnt work for me yesterday.
I defined a data type that looked like this:
DT_TEST (Complex Type)
     Recordset (0..unbounded)
          Data (1)
               Row (type string / 0..unbounded)
During the file content conversion I just did this:
Recordsetname: Recordset
Recordset structure: Data, 1
Data.fieldNames = Row
Data.fieldSeparator = nl
This was also described in blog:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
But my result is always like this:
<Recordset>
     <Data>
          <Row>ABC;DEF;GHIJ
     </Data>
</Recordset>
<Recordset>
     <Data>
          <Row> KLM;NOP;Q
     </Data>
</Recordset>
<Recordset>
     <Data>
          <Row> RSTU;VW
     </Data>
</Recordset>
.And not like I wished.
Can anybody help me?
Greetings
Tobias

Hi,
I just gone thru the blog and as per the structure defined I have no idea how this works this way.
But if you modify the structure to
RecordSet - occurs 0-1
Data - occurs 0-n
Row - occurs 0-1
And in the Content conversion mentions Data,* instead of Data,1.
In this case you will be getting a output like
<Data>
<Row>ddf,sdfsd,sdf</Row>
</Data>
<Data>
<Row>fff,sdfsd,sdf</Row>
</Data>
You can achieve this but I don't have any idea how to generate that kind of output with the Structure and the conversion parameter mentioned in the blog.
Thanks,
Prakash

File Adapter content conversion delimited/possitional file format.

Hi,
I have the following file to JDBC scenario, but having some issues with the file content conversion due to the file structure.
Example:
=======
000038A020301
000038A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049572=BN01 =BOMETLSS_ML_STD_30A7
000038A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992427=AH10
OLRENDZZZZ
Example 2:
========
000040A020301
000040A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049570=BN01 =BOMETLSS_ML_STD_30A7
000040A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992425=AH10
000041A020301
000041A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049571=BN01 =BOMETLSS_ML_STD_30A7
000041A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992426=AH10
000042A020301
000042A020101=AA1=AC1=AD=AG1=AH1=AI1=AK3049572=BN01 =BOMETLSS_ML_STD_30A7
000042A020200=AA96=AB001=AC17000.000=AD1200=AF13021537=AE=AG8005992427=AH10
000043A020301
000043A020104=AA1=AC1=AD200619=AG1=AH1=AI1=AK3049568=BN01
000043A020200=AA73=AB001=AC3700.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB002=AC5500.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB003=AC1800.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000043A020200=AA73=AB004=AC5000.000=AD1300=AF13047285=AE200619=AG8005992423=AH10
000044A020301
000044A020104=AA1=AC1=AD200619=AG1=AH1=AI1=AK3049569=BN01
000044A020200=AA73=AB001=AC3700.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB002=AC5500.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB003=AC2500.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
000044A020200=AA73=AB004=AC5000.000=AD1300=AF10008536=AE200619=AG8005992424=AH10
OLRENDZZZZ
Example Explained:
==============
Position 1-9 is a "Transactional number".
Position 10-11 is "Record type".
Position 12-13 is "Line Item count".
Four record types exist:
03 = Location header
01 = Transactional Header
02 = Line Item
OLRENDZZZZ = EoF marker.
The equal sign "=" is a field separator/delimiter.
In each delimited field, after the first equal sign in the record, the first two characters represent a field qualifier/field name tag/identifier and there only the data begins until the following delimiter.
Each record is ended in a "CLRF"/'nl'.
The file is build up, but not locked and only completed until the EoF marker "OLRENDZZZZ" is inserted by the application on the last record of the file.
My solution so far:
=============
Record Structure: row,*
Record Sequence: Ascending
row.fieldNames: field1,field2,field3,ect.......
row.fieldSeparator: =
row.endSeparator: 'nl'
row.keyFieldInStructure: ignore
ignoreRecordsetName: true
This brings the file into the integation server as xml as follow:
============================================
<?xml version="1.0" encoding="utf-8"?>
<ns:SAPtoFuelFACS xmlns:ns="urn:engenoil-com:i_fuel_facs_sap">
     <row>
          <field1>000038A020301</field1>
     </row>
     <row>
          <field1>000038A020101</field1>
          <field2>AA1</field2>
          <field3>AC1</field3>
          <field4>AD</field4>
          <field5>AG1</field5>
          <field6>AH1</field6>
          <field7>AI1</field7>
          <field8>AK3049572</field8>
          <field9>BN01</field9>
          <field10>BOMETLSS_ML_STD_30A7</field10>
          <field11>BP0003049572</field11>
     </row>
     <row>
          <field1>000038A020200</field1>
          <field2>AA96</field2>
          <field3>AB001</field3>
          <field4>AC17000.000</field4>
          <field5>AD1200</field5>
          <field6>AF13021537</field6>
          <field7>AE</field7>
          <field8>AG8005992427</field8>
          <field9>AH10</field9>
     </row>
     <row>
          <field1>OLRENDZZZZ</field1>
     </row>
</ns:SAPtoFuelFACS>
So far, so good.
The problem I am having is that I have to check for the EoF marker "OLRENDZZZZ" to be present before picking up the file, else the file is not completed.
I have tried a script to rename files in msg pre-processing in the channel, but the problem is the file channel has to be triggered and the original file mask is necessary for this, but then this mask is a valid pickup file mask. So to me it seems the only way is to do this is during the content conversion process as the files not matching the file criteria, where a EoF "OLRENDZZZZ" definition is not present, will not be picked up and be ignored until it is present or totally independent with a batch job.
If someone has a more elegant way to solve this problem with just using the file channel configuration where every thing is pretty much apparent, I would greatly appreciate it if you could assist.
Regards
Willie Hugo

The problem I am having is that I have to check for the EoF marker "OLRENDZZZZ" to be present before picking up the file, else the file is not completed.
I suggest a script.
Say The files are dropped in FolderA. Have a script transfer a file to FolderB only if it finds the EoF marker in a file. Thus FolderB will be what XI will poll and that will always have the complete file.
Hope this sounds good!!!

Sender file adapter - content conversion question

Hi all
We have a .csv file to be passed to XI that has column headings as well. Is there a way of stripping the header using "Content conversion". We declared the RecordsetStructure as "header,1,item,*" but then it needs a keyFieldname and identifier which is obviously not available as the first line only has column headings.
Hoping for a reply soon.
Thanks
Salil

Salil,
In RecordsetStructure you define as header,1,item,9999999999. But if you have more than 9999999999 records then the extra records after this will come as a second file.
If you expect more item records then increase the number of 9's. Then we dont need to give the key field.
---Satish

File Adapter - Content conversion parameters at Receiver

Hi all,
I'm trying to translate a XML message to a text line file.
My XML message is this:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Proveedor_100011 xmlns:ns1="http://sap.com/xi/webservices/buyordint">
<config>
<directory>c:/tmp</directory>
<filename>dynamicFile3.txt</filename>
</config>
<root><string>Header;423423</string>
<lines>
<value>LINE;</value>
</lines>
</root>
</ns1:Proveedor_100011>
I only want to write to text file the "root" TAG content.
I try different "Content conversion parameters" in the integration builder (configuration)
For example:
RecordSet Structure: root
root.addHeaderLine 0
root.fieldSeparator ;
root.endSeparator ;
but the better result is all XML content.
Can someone tell me how to skip "Config" TAG and only write the "ROOT" one?
I'll apreciate any help.
Thanks in advance,
Diego.

Hi Sravya,
I've tried again without better luck.
I change the root element of my message from
Proveedor_100011 to Proveedor100011. (removed underscore)
I created the next message as in your weblog:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/webservices/buyordint" targetNamespace="http://sap.com/xi/webservices/buyordint">
<xsd:element name="Proveedor100011" type="Proveedor100011" />
<xsd:complexType name="Proveedor100011">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
54650790d48f11dab96c001438eb3b44
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="root">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f20d48e11dab854d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="head" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f21d48e11da8f1dd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="rows" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f22d48e11da894ad06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f23d48e11dab889d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="filenode">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f24d48e11daab91d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="filename" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f25d48e11da8becd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="filepath" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f26d48e11dac56cd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<Proveedor100011>
<root>
<rows>
<value></value>
</rows>
</root>
<filenode>
<filename></filename>
<filepath></filepath>
</filenode>
</Proveedor100011>
I've tried to set "Recordset Structure" in file adapter configuration to "root,filenode" and to "Proveedor110001, filenode" but no output is writed
We are using XI version: SAPKB64015, which version did you use in your weblog?
Thanks and regards,
Diego.

File recevier content conversion - 2 header lines

Similar Messages

Maybe you are looking for