File recovery from ipod to hard drive

I lost files on my hard drive, but still have them on my ipod. Is there a way to restore my hard drive from my ipod?

For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Similar Messages

  • File recovery from a "bad" hard drive?

    My macbook air was giving me the flashing-question-mark-folder. I took it into the apple store and they told me my hard drive "went bad" and has to be replaced. I don't have a back up (stupid, I know)- is there really NO way to get my files recovered? (the guy at the store was kinda rude and I got the feeling he wasn't trying very hard...)

    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod to a computer.
    For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
    Enable your iPod for disk use.
    See: iPod Disk Use.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.
    SharePod is also freeware.

  • Need instructions on restoring files from iPod to Hard Drive

    My ExHD went kaputz again so I need to restore all of my tunes and playlists from my iPod to the HD. I've seen instructions on here on how to do that but can't find them anywhere. Can someone give me the link to do this?

    There is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
    iGadget Windows Only
    iPodCopy Mac and Windows Versions
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only

  • Importing Songs from iPod after hard drive failed

    My hard drive failed. Fortunately all of my songs were backed up on my iPod. Got a new computer and can't figure out how to get the songs from my iPod back to my computer. Some songs were purchased from iTunes, some from CDs. I tried the import function and all it does is bring the titles into my library but cannot find them when I try to play them on my computer. The songs are still on my iPod.
    iPod 40g and Nano   Windows XP  

    The transfer of music is designed to be one way by default - from iTunes to iPod, however there are a number of third party utilities that you can use to retrieve the files from your iPod. This is just a selection.
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    PodPlus Windows Only
    Have a look at the web pages and documentation for these and pick one you are happy with, they are generally quite straightforward.
    There is also a manual method of accessing the iPod's hard drive posted in this thread: MacMuse - iPod to iTunes
    You may already be using the iPod in manual update mode in which case you can ignore the rest of this post. In manual mode, your iPod is safe from being accidentally erased. However if you are getting a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, click *No*. Your iPod should appear in the iTunes source list. Change the update setting in Preferences>iPod to "manually manage songs and playlists" Managing Your Songs Manually
    You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘) keys, on Windows, hold down Shift + Ctrl. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 3 and 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box.
    Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

  • How do you exports songs from ipod to hard drive?

    I just got a new computer and need to take the songs from my ipod and store them on my new computer....Also, is there an easy way to transfer my songs from my old computer to my new one???
    Thanks

    "I just got a new computer and need to take the songs from my ipod and store them on my new computer"
    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPod Access Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    TuneJack Windows Only
    iPod2PC Windows Only
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

  • Sync files to computer from iPod after hard drive crash

    My main hard drive crashed that had all of my music. I'm guessing only a few sectors failed since I was able to recover 95% of my music library but all of my songs had since been transferred to my 64gb gen 5 iPod touch.So now I want to pull all of my music off of my iPod and compare it to the songs I was able to recover (I have already added the recovered songs to itunes).
    My problem is that when I sync my iPod I don't see any music at all. When I first connect the iPod it doesn't even show any audio files on the device but when I backup the device it shows the correct size amount for the files (24.88gb). Even though the bar at the bottoms shows that I have 24.88gb of audio files nothing is shown when I click on Music under my device. *** is going on here. I refuse to believe that I can't get the songs FROM my iPod.
    Any help here would be much appreciated

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    or
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Move MP3 files from ipod to hard drive

    Hey,
    My hard drive dies and I have lost everything on it. Good news is that a lot of my music is stored on my ipod. How do I get the music files, which were mostly NOT purchased from itunes but my own MP3s, off of my ipod on on to my new hard drive?
    Thanks!
    Gregg

    Welcome to Apple Discussions!
    Here are a few options...
    YamiPod
    MacMuse: Computer Crashed
    You can also search the discussions or the Internet via Google for more options.
    btabz

  • My iPod reset itself and converted all of my music into files on the iPod's hard drive. How do I access them and get them back?

    I made the mistake of disconnecting my iPod from my computer without ejecting it and now all of my music, podcasts and other files are listed as "other" in the iPod summary section. I can't access the files outside of iTunes (when the iPod is just being used as an external hard drive), so I need to know if there's any kind of third party program or other technique I can use to get this stuff back.

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • I can't manually drag files to/from my external hard drive to my macbook air!

    My laptop is running on 10.9.4 (freshly installed, quite literally two days ago).
    I have all permissions to read and write on my hard drive, and it is formatted in MS-DOS (FAT32). It worked yesterday when I moved music on the laptop but now when I try to move other files (even within the hard drive itself) I can't. Help please! The only way I can move anything to and from the hard drive is to copy-paste is but I cannot manually drag anything.

    Can you drag files to or from any folder?

  • Data recovery from serially installed hard drives

    Like many other users on these boards, by X205 is refusing to boot.
    My question: How can I recover the data on my hard drives, since there are two of them?
    I ran a search to find all of the files I wanted (*.jpg in this case), and the search came back with hundreds of files (photos) that I am trying to recover....but it won't let me open them up.
    I'm guessing since the drives are installed in series in this machine, somehow I need to find a way to read them both to access these files?
    Any help is appreciated!

    > {quote:title=rok_hunter wrote:}{quote}
    > Like many other users on these boards, by X205 is refusing to boot.
    >
    > My question: How can I [recover the data on my hard drives , since there are two of them?
    >
    > I ran a search to find all of the files I wanted (*.jpg in this case), and the search came back with hundreds of files (photos) that I am trying to recover....but it won't let me open them up.
    > I'm guessing since the drives are installed in series in this machine, somehow I need to find a way to read them both to access these files?
    >
    > Any help is appreciated!
    You might be able to hook it up externally and run some data recovery software on the drive...
    That being said, you'd need probably need to buy the software, since this type of recovery is a little more advanced and will need to rebuild the control table/data.

  • Recovering music from Ipod after hard drive failure.

    My hard drive failed and was replaced. I had most of my music backed up, but not all of it. Can I recover songs from my Ipod and put them pack into Itunes? Can I also recover playlist? I did not have those backed up.
    Thanks,
    Mike

    SImpler solution, if your not too comfortable using terminal, Is to simlply download the trail version of Music Rescue.
    http://www.kennettnet.co.uk/musicrescue/
    The trails free forever, it just has an annoying popup every 50 songs you take off your ipod, it works exactly like a reverse iTunes.

  • Can I pull iWeb files back from MobileMe after hard drive failure?

    I suffered a recent hard drive failure and while I had my pictures backed up I didn't have my iWeb files back up and don't want to start the website from scratch if at all possible. Is there any way to save the files I uploaded to MobileMe back to my computer so I can continue my website?

    Welcome to the Apple Discussions. Chapter 2.3 of the iWeb FAQ.org site has tips on using some of the existing image, audio and/or video files in the published site in the reconstruction of the site.
    OT

  • HT201250 Data recovery from WD Elements Hard drive after Time Machine formatted it

    I plugged my brother in laws WD Elements hard drive into my MacBook Pro. It asked me if I wished to use this drive as my time machine back up to which I answered no. I was going to copy and paste some movies onto his drive. I  not sure how it occurred but Time Machine has now "partitioned or formatted " the drive and erased all data that was on it. The drive appears empty on my MacBook and is now unrecognisable on his PC computer. The drive had some important documents and I am praying that I somehow can recover them. Does anyone have Amy suggestions as to where to start ?? Please help !!!

    It probably got reformated to a Mac specification which is why the PC can't recognise it. I am not sure if any of the mac recovery programs would work but maybe someone else can advise you. One of the professional recovery businesses could help but are very expensive.

  • Slow file transfer from USB 3 hard drive connected to EA6300

    Hi,
    I have a 1T external hard drive USB 3 connected to my EA6300 and I have a transfer rate of 3MB/s on my macbook air (AC wifi).
    If I connect the HD to my imac and create a network share I go up to 25MB/s (from macbook air). So it's not a wifi issue, I suspect more an issue at the USB / resource management level.
    Did someone experience the same issue? 
    Thanks for you help

    Hi,
    What is the brand and model of your external hard drive? It might be a compatibility issue.
    I have a 1TB Seagate FreeAgent GoFlex (portable) and it doesn’t have a problem. I made sure that the firmware of my router is updated and did a reset  after the upgrade and configured it manually.  Also, I removed the hard drive before I did the router update.
    I used another hard drive and both of them have no issues with transfer rates.
    I do believe that your transfer rate concern is directly related to the usb hard drive compatibility of EA6300.
    You might need to check this website so you can see if your hard drive is compatible with your router.
    List of tested USB hard drives and printers for the Linksys Smart Wi-Fi Router, EA6300

Maybe you are looking for

  • Satellite A110: Graphic card is only at 64MB after traditional 1.70 Bios update

    Hi!! I have toshiba satellite A110. I've upgraded my bios to 1.70 version but now my video card is only at 64MB. What can I do to make my video card back to 128mb or where can I find the traditional bios update for this version of bios.Thanks

  • Change of  image in JLabel doesn't appear

    Hi! In my custom JPanel class, I add a JLabel with nothing in it. Then. When auser clicks a Button, I set an imageicon for this jlabel. but it doesn't appear until I force a repaint, e.g. by resizing the app. repaint(), validate() or invalidate() did

  • VMS Standard SAP reports

    Hi, Is there any standard reports, SIS standard analysis available for VMS module? Thanks and Regards Chidambaram

  • N96- How can it be made faster?

    I first had the factory firmware version 10. something. i updated it to version 11 which came out just recently. but now my mobile has become very slow. is there any way to make the mobile faster? thanks. What's Worth Doing, Is Worth Doing Well! All

  • Export as PDF question

    Hello guys, I have just created business card. It is created in Photoshop, using 300 dpi and CMYK setting. My printshop requires PDF file, so I hit save as PDF, but it asks me more questions about additional export setting and I am not sure which to