File references in Buttons

I have an InDesign document with over 300 buttons and use the feature that a mouse click can transfer to a named anchor point in another document (obviously this is after the conversion of both docs to pdf). I used a very long file name for the 2nd document and now find that my disc manufacturer (Lulu) can only write the archaic ISO 9660 format with 8-character file names.
To go through all 300 buttons and change the file name is tedious and requires many mouse clicks and several drop-down menu selections all the while remembering the specific anchor name that must be chosen. The probability of an error or two is substantial.
Is there some automated way to batch change the file name (to an 8-character name) for this second document? This could be in InDesign or in Acrobat. It would save a lot of work.
This would be a useful feature/addition to InDesign for times when you want to change a file name, e.g. add a new version number to the filename as you make progress.
Any suggestions would be appreciated. As always this comes up at the 11th hour.
Here's my system specs:
The exact version of InDesign you are running. 5.0.3
Your Operating System details. Windows XP Pro SP2
Amount of installed RAM. 2 GB
Amount of free disk space. 77 GB free
Make/Model of Video Card. NVIDIA GeForce 7300LE
Acrobat Standard 7.1.0

>I'm guessing someone could bang something like
out in a few minutes.
Presuming the filename truncating is handled by some standard algorithm, which is probably the case. What scares me about this is that until the filenames are actually altered, I don't see a way to test the buttons. Are you looking to permanently shorten your linked filenames on your hard drive? What will that do to other documents?
If you go that route, I'd package the file first so you have a copy of everything you need in one folder, then make changes to the packaged copies.
Peter

Similar Messages

  • File Reference and XML

    Hey everyone, i've been working on an mp3 player that runs
    off of xml i have it set up so that for each instance of a song it
    attaches movie clips onto the stage that serves as buttons. I'm
    trying to add a download button so when you click it it will
    download the file. I'm trying to do this with the file reference
    class but i've been working on it for a week with no luck what so
    ever. if anyone has any ideas it would be so greatly appreciated
    heres my code and xml.
    there may be some unnecessary code in there i was messing
    around trying different things.

    Sorry if it wasnt clear. But to be completely truthful i'm
    not sure what it is thats not working. I'm trying to populate the
    file reference by the xml. everything works except when i test the
    movie online when i click the download button the save file opens
    but it says undefined and clicking save does absolutely nothing.
    So my guess is that my problem lies in my file reference to
    the button.
    this part
    var url:String = "_global.download
    _root["downloadbut"+i].onRelease = function() {
    if(!theFileRef.download(url,_global.songname.mp3)) {
    trace("dialog box failed to open.");
    } else {
    trace("dialog box has open.");
    trace(_global.songname
    i was hoping to know if anyone knew how to properly populate
    the file reference with xml.
    Sorry. Hope that is more clear.

  • RoboHelp HTML 9 - CHM file The Back button works uncorrectly.

    Dear all,
    I am using RH HTML 9 to generate chm file from my project. The problem is when I click on topic 1, topic 2, topic 3 in turn in the Content pane. After that I click the Back button three times, topic 2 is highlighted on the Content pane, although the content of the topic 1 is displayed on the right pane. I think the topic 1 should be highlighed on the Content pane. Is it a bug of Microsoft HTML Help ?
    Please help me understand what Microsoft HTML Help does in generating .chm within RoboHelp 9 ?
    Thank you.

    Dear RoboColum(n),
    The following is the report from my machine. Please help me check it. I really don't have experience in this. Thank you so much.
    MJ's Help Report
    A common problem with HTML Help 1.x is DLLs not correctly registered during installation. This utility checks all components and registers DLLs if required. We also report if the RoboHelp DLL is registered, and if MS Help 2 components are installed and registered.
    After running the report, try running your program again to see if the fault has cleared.
    General Info
    Report EXE:            C:\DOCUME~1\nhanvt\LOCALS~1\Temp\7zOC4BF7DD4\MJsDiag.exe
    Report Run Date:       12/18/2012 9:38:11 AM
    Report EXE Version:    2.7.2.0
    Download URL:          http://helpware.net/downloads/
    Operating System:              Windows NT 5.1.2600
    SysLocale.DefaultLCID: 0x0409 (1033)
    SysLocale.PriLangID:           0x0009 (9)
    SysLocale.SubLangID:           0x0001 (1)
    DecimalSeparator:              .
    HH Installed:                  YES
    HH Version:                    5.2.3790.4110
    HH Friendly Version:           > 1.4a
    H2 Installed:                  NO
    H2 Version:                   
    IE Installed:                  YES
    IE Version:                    6.0.2900.5969
    IE Friendly Version:           Internet Explorer 6 (Windows XP SP2)
    NT Administrator
    NT Admin Check: Current user has full administor privileges: YES
    HTML Help Run-time Components
    File Registered OK: C:\WINDOWS\system32\hhctrl.ocx (Version: 5.2.3790.4110)
    File Registered OK: C:\WINDOWS\system32\itss.dll (Version: 5.2.3790.4186)
    File Registered OK: C:\WINDOWS\system32\itircl.dll (Version: 5.2.3790.2453)
    File Found: C:\WINDOWS\system32\hhctrl.ocx
            Version = 5.2.3790.4110
            Registry Info: {adb880a6-d8ff-11cf-9377-00aa003b7a11}
    ClassName = HHCtrl Object
    InProcServer32 = C:\WINDOWS\system32\hhctrl.ocx
    ProgID = Internet.HHCtrl.1
            DLL is Found and Registered OK = YES
    File Found: C:\WINDOWS\system32\itss.dll
            Version = 5.2.3790.4186
            Registry Info: {5D02926A-212E-11D0-9DF9-00A0C922E6EC}
    ClassName = Microsoft InfoTech IStorage System
    InProcServer32 = C:\WINDOWS\system32\itss.dll
    ProgID = MSITFS1.0
            DLL is Found and Registered OK = YES
    File Found: C:\WINDOWS\system32\itircl.dll
            Version = 5.2.3790.2453
            Registry Info: {4662DAA5-D393-11D0-9A56-00C04FB68BF7}
    ClassName =
    InProcServer32 = C:\WINDOWS\system32\itircl.dll
    ProgID = ITIR.WordWheelBuild.4
            DLL is Found and Registered OK = YES
    For HH Version Info See: http://helpware.net/htmlhelp/hh_info.htm
    HTML Help 1.x Registry Settings
    Description: If present this Key can disable HH Shortcuts and HH WinHelp commands on the local PC
    Reference: KB 810687, KB 323180
      Key: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System\
      Value: HelpQualifiedRootDir (string value) =
      -> Report: Policy is not enabled. HH Shortcuts are not restricted on local machine.
    Description: This key can be used to enable Hhctrl.ocx ActiveX Visual controls on servers
    Reference: KB 892675
      Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\HHRestrictions
      Value: UrlAllowList (string value) =
      Value: MaxAllowedZone (string value) =
      -> Report: Settings reported for information only.
    Description: This key allows MS programs such as iexplore.exe to open ITS file that do not have a .CHM file extension
    Reference: KB 873343
      Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\HelpRestrictions\AllowedExtensions
      -> Report: No special file extensions have been enabled on this PC.
    Description: This key can be used to allow access to remote ITS files
    Reference: Win 2003 SP1, KB 896054
      Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions
      Value: UrlAllowList (string value) =
      Value: MaxAllowedZone (string value) =
      Value: NestedProtocolList (string value) =
      -> Report: Settings reported for information only.
    For HH Registry Info See: http://helpware.net/htmlhelp/hh_info.htm#hh14
    HTML Help 1.x Workshop Components
    *** HH Workshop not found or not installed correctly. Try reinstalling.
    File not found: C:\Program Files\itcc.dll
    File Found: C:\WINDOWS\system32\hha.dll (Version: 4.74.8702.0)
    KeyHelp OCX by Keyworks.net - KeyHelp.ocx
    This is for information only. KeyHelp is a 3rd party DLL.
    *** KeyHelp.ocx is not registered or not installed!
    *** You can register your KeyHelp.ocx using the "Register a DLL" button.
    *** KeyHelp.ocx could be installed anywhere on your PC by normally resides in the Windows System folder.
    For More Info See: http://keyworks.net/
    RoboHelp DLL by eHelp/Macromedia - HHActiveX.dll
            Registration Info: {399CB6C4-7312-11D2-B4D9-00105A0422DF}
    Version = 9.0.1.262
    ClassName = HHComponentActivator Class
    InProcServer32 = C:\Program Files\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
    ProgID = HHActiveX.HHComponentActivator.1
            Dll Found and Registered = YES
    For More Info See: http://www.macromedia.com/
    MS Help 2 Run-time Components
            *** MS Help 2 NOT installed on this PC

  • Same data wire (source and sink are listed as "datalog file reference of") will not connect

    I am trying to write a short program that will convert a string spreadsheet file into a datalog file with the numbers turned back into numbers.  I have a case structure for each type of spreadsheet (different types per columns and different number of columns).  I use a 'for loop' to process all records (rows).  And I use a 'sequence structure' to individually process each column item into its original format (string or number), then group together into a bundle and then write the results to the datalog file format.
    The first two (case structures) worked but the second pair of case structures would not allow me to connect the datalog file reference number from the 'write to datalog file' to the 'close datalog file' through the 'for loop' wall.
    I am using 8.2
    I am sure it is an stupid issue, but the error message just did not point me towards a solution.
    con-fUsed, DogFace.
    Attachments:
    PROCESS SH TO DLOG.vi ‏84 KB

    The problem is that you are creating a different type of datalog file in cases 2 and 3 than you are in cases 0 and 1.
    The structure of a datalog file is the same as an array of clusters. All of the clusters must be of the same structure. Only the values of the individual cluster elements can vary.
    You are trying to write three different cluster structures to a single datalog file. You just can't this.
    You'll either need to write to three different files, or come up with a structure that everything will fit into.
    One other quick hint. NEVER use a variable to pass data when you can wire the terminal directly to the function.
    Ed
    Message Edited by Ed Dickens on 03-19-2007 11:39 AM
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • How to load PDF (HTML Loader) with File Reference (dialog box) [AIR]?

    Hi.  I'm trying to get my AIR application to load a PDF document from the dialog box using File Reference Class.
    With the code that I have if I use a regular Loader then I can get a PNG image to load into a container and display on the screen.  But PDF's require HTML Loader which seems not to accept event.target.data because it is expecting a String.
    This is the error I got
    TypeError: Error #1034: Type Coercion failed: cannot convert "[object FileReference]" to flash.net.URLRequest.
        at test_pdf_load_from_dialogfla_fla::MainTimeline/loadFile()[test_pdf_load_from_dialogfla_fl a.MainTimeline::frame1:61]
    [UnloadSWF] test_pdf_load_from_dialogfla.swf
    Here is my code:
    import flash.net.URLRequest;
    import flash.display.MovieClip;
    import flash.html.HTMLLoader;
    import flash.net.FileReference;
    import flash.net.FileFilter;
    var file:FileReference=new FileReference();
    var container:MovieClip=new MovieClip();
    addChild(container);
    var i:Number=1;
    // button is an object on the stage, not being called via actionscript
    button.addEventListener(MouseEvent.CLICK, showDialog);
    var myFile:FileReference;
    var myFileLoader:HTMLLoader;
    function showDialog(e:MouseEvent):void{
        myFile=new FileReference();
        var PDFFileType:FileFilter=new FileFilter("PDFs (*.pdf)","*.pdf");
        myFile.browse([PDFFileType]);
        myFile.addEventListener(Event.SELECT, selectFile);
    function selectFile(e:Event):void{
        myFile.addEventListener(Event.COMPLETE, loadFile);
        myFile.load();
    myFileLoader=new HTMLLoader();
    function loadFile(e:Event):void{
    myFileLoader.load((e.target).toString());
    (with the new forum selection I also can't seem to put this topic into the ActionScript location of the forum for Flash Pro.)

    Success!!
    I was pondering on this subject for several hours when I thought "perhaps the e.target declaration in the loadFile function might contain the "name" property.
    When I used a trace statement to test this, my thoughts revealed that to be accurate.  The e.target.name call does indeed populate the Output console with the correct file name.
    To be sure I did the following:
    myFileLoader.load(new URLRequest(String(e.target.name)));
    myFileLoader.width=[[set width to anything other than the default of 0 to display the PDF content of the HTMLLoader]]
    myFileLoader.height=[[ditto from previous line, the default is 0 which would make the PDF content invisible]].
    I am so pleased to have had this inspiration and also to the fact that the ActionScript documentation that I found had good examples to follow.

  • Broken file references

    I have been trying to "fix" my broken file references using the link "iTunes: Moving your iTunes Music Folder" but when I get to number 8 "Click Create" there is no "Create" button for me to click. If I hit "ok" it has my new folder listed under iTunes Folder Music Location. However, when I click "ok" it goes to Updating Music Library". I never get a message that says "Changing the location of the iTunes Music Folder requires updating the location of each of the songs in you music library. This update will not move or delete any of your song files."
    I have retried this several times. What am I doing wrong?!
    I have iTunes version 6.0.4.2.

    I have been trying to "fix" my broken file references using the link "iTunes: Moving your iTunes Music Folder" but when I get to number 8 "Click Create" there is no "Create" button for me to click. If I hit "ok" it has my new folder listed under iTunes Folder Music Location. However, when I click "ok" it goes to Updating Music Library". I never get a message that says "Changing the location of the iTunes Music Folder requires updating the location of each of the songs in you music library. This update will not move or delete any of your song files."
    I have retried this several times. What am I doing wrong?!
    I have iTunes version 6.0.4.2.

  • A File Reference and its evolving life!

    Hi all,
    I've noticed something that came as a little bit of a surprise to me, but I think I have the explanation, at a hand-wavy higher level anyway.  What I have not established is if this is a 'bug' or a 'feature', and if there are any ways the following issue can be avoided at the NI function/api layer.
    Consider the file open and file close function.  You open a file, you use the reference to the file to write/read data, then at some point you close the reference and the close function spits out the file-path.  Here are a couple of tid-bits you may not be aware of (that are easy to test):
    Q1) After your application opens/creates a file and starts using the file-reference to make file writes, if an external source changes the file-name of that file... guess what will happen on your next write function call?
    A1::  The write successfully updates the newly re-named file with your new data without producing an error or a warning.  (At least this is the case if your program is running on a vxWorks cRIO target and the file-name is changed directly on the cRIO via an FTP browser.)  
    Did this surprise you? It did surprise me!  -My handwavy explanation is that the file-pointer is perhaps managed/maintained by the OS, so when the OS tells the file-system to rename that file, the pointer that LabVIEW holds remains valid and the contents of the memory at the pointer location was updated by the OS.
    Q2) Continuing from the situation setup in Q1, after writing several new chunks of data to a file now currently named something completely different than when the file reference was originally created, you use the close function to close the file-reference.  What do you expect on the file-path output from the close function??  What do you actually get??
    A2::  The close function will 'happily' return the ORIGINAL file-name, not the actual file-name it has been successfully writing to(!).   This has some potentially significant ramifications on how/what you can use that output for.  At this point there is a ton of room for pontifications and more or less 'crazy' schemes for what one could do, but I argue that the bottom line is that your application has at that point completely lost the ability to accurately and securely track your file(s).  Yes, you could list a folder and try and 'figure out' if your file-name was re-named during writing and you can in various ways make more or less good 'guesses' on which file you in reality just had open, but you can never really know for sure.
    So, what do you guys think?? Is the behavior of returning the (incorrect) original file-path when you close the handle a BUG or a FEATURE??  Would it not be possible for LabVIEW to read back the data contained in the (OS?) pointer location and as needed update the file out path data when it closes a reference?  Should we not EXPECT that this would be the behavior?
    Q3)  Again, continuning from the above situation, lets assume we are back at the state in Q1, writing data to a (re)named file.  What happens if the file is deleted by an external process? What happens to the file reference? File function calls using the reference?
    A3::  This one is less surprising.  The file reference remains 'valid' (because it is a valid reference), but depending on the file function you are calling, you will get error such as error 6 (binary write reports this), or error 4 (a TDMS write will report this error), etc.  So as long as you don't rely on file ref-num tests to establish if you are good to go with a file-write or file-action, you should be safe to recover in an appropriate way.. Just don't forget to close the file-reference, even if the file is 'gone', the reference will still remain in memory until you 'close' it (with an error)(?I might be wrong about this last part?)
    I am not sure if the above is possible on e.g. Windows, Windows would probably prevent you from re-naming a file that has an open file-handle to it, but this is definitley observable on at least vxWorks cRIO targets.  (I don't have PharLap ETS or RTLinux devices so I can't test on those targets.. if you want to test its pretty straigth forward to make a simple test app for it.)
    [begin rant-mode related to why I found this out and why this behavior BITES]
    There are situations where the above situation could cause some rather annoying issues that, for somewhat contrived reasons related to cRIO file API performance, CPU and memory resource management, are non-trivial to work around.  for example, using the NI "list folder" to listing folders take a very hefty chunk of time at 100% cpu that you cannot break up, so polling/listing folders after every file update (or even on a less regular interval) is a big challenge, and if you are really unlucky (or didn't know any better) and gave the list command in a folder with 1000's of files (as opposed to less than about 100 files), the list will lock your CPU at 100% for 10's of seconds...  Therefore, you might be tempted to maintain your own look-up table of files so that your application can upload/push/transfer and/or delete files as dictated by your application specific conditions... except that only works until some prankster or well-intention person remotes in and starts changing file-names, because then your carefully maintained list of file-names/paths' suddenly fall appart.
    [\end rant]
    QFang
    CLD LabVIEW 7.1 to 2013

    Hey guys, thanks for turning out your comments on this thread!
    -Deny Access : still able to re-name (and delete) the file via FTP browser (didn't test other file avenues).  I think this is for the same reason that NI vxWorks targets (such as cRIO-9014) do not support the concept of different users with different rights, as such, everyone have access rights to everything at the OS level.  Another issue for me would be that "Deny Access" does not work on TDMS file references, so even if it worked, it would not help me.
    --> I strongly suspect that these things are non-issues or issues that can be properly managed, on the new NI LinuxRT targets since (the ftp is disabled by default) it supports user accounts and user restrictions on files/folders.  The controller could simply create the files in a tree where 'nobody else' has write access.
    Obviously nobody should mess around with files on a (running) cRIO, but customers don't always do what they are supposed to do.   
    As far as the 'resources' or overhead to update the file-refnum with the new information, this would not be needed to be done in a polling fashion, simply, when the file-close function is called, as part of that call it updates its internal register from the pointer data, so this should be a low overhead operation I would think?  If that is a true concern, a boolean input defaulting to not updating or a separate 'advanced close' could be created?
    I've included a zip with the LV2013 project and test VI's (one for tdms one for binary) that I've used. nothing fancy, but in the interest of full disclosure.  The snippet is the 'binary file' test vi, in case you just want a quick peak:
    Steve Bird's findings of (yet) another behavior on Pharlap systems is also very interesting, I think!!
    [EDIT]  JUST TO CLARIFY, on vxWorks, the re-named file keeps being successfully written to, unlike the PharLaps' empty file that Steve Bird found.
    QFang
    CLD LabVIEW 7.1 to 2013
    Attachments:
    cRIO Tests.7z ‏30 KB

  • How can I create dynamic file references in Power Query?

    Hi all,
    I'm new at using PowerQuery, and so far I like it. There's one thing I am struggling with though... Once I have set up my PoweQuery connections, I don't find an easy way to change the file to which the query is connecting. I'm using it for a monthyl recurring
    process, and every month the source data to query on woudl be different. The same in format/structure, but just a different dataset.
    Is there a way to make the source setup more dynamic? Can I for example in a parameters sheet enter the name and path of the new source file and update the queries?
    Currently the Advanced editor shows me following file reference:
    let
        Source = Excel.Workbook(File.Contents("Z:\Templates\EMEA\Source Data Tables\EMEA_EW_Source_Data_for_Power_Queries v1.xlsm")),
    Thanks in advance for suggestions

    Yes, this is something that you can do with Power Query. Here's how you can do it:
    Create a table in Excel containing your parameter value. Let's say that it has one column, called ParameterValue, and one row.
    Create a new Power Query query that gets the data from this table. Call the query something like ParameterQuery.
    In your original query you will now be able to reference values from your parameter query by saying something like this:
    Source = Excel.Workbook(File.Contents(ParameterQuery[ParameterValue]{0})),
    HTH,
    Chris
    Check out my MS BI blog I also do
    SSAS, PowerPivot, MDX and DAX consultancy
    and run public SQL Server and BI training courses in the UK

  • Getting the following error while attaching a .applescript file to a button

    Hi. I hav created a xcode project using cocoa application. Also I hav add a .applescript file to that project. I hav attached dat file to a button. When I build the project, got the following error . Can anybody help me out this?
    [Session started at 2010-03-02 13:02:03 +0530.] GNU gdb 6.3.50-20050815 (Apple version gdb-966) (Tue Mar 10 02:43:13 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 1705. kill
    The Debugger Debugger is attaching to process [Session started at 2010-03-02 13:03:31 +0530.] 2010-03-02 13:03:31.452 test[1717:10b] An uncaught exception was raised 2010-03-02 13:03:31.453 test[1717:10b] * -[NSKeyedUnarchiver decodeObjectForKey:]: cannot decode object of class (ASKNibConnector) 2010-03-02 13:03:31.453 test[1717:10b] Terminating app due to uncaught exception 'NSInvalidUnarchiveOperationException', reason: '** -[NSKeyedUnarchiver decodeObjectForKey:]: cannot decode object of class (ASKNibConnector)' 2010-03-02 13:03:31.454 test[1717:10b] Stack: ( 2510958571, 2520804923, 2510958027, 2510958090, 2486042959, 2486048301, 2486049449, 2486041504, 2486039829, 2489002358, 2486041504, 2486039829, 2488999761, 2488998172, 2488997215, 2488997021, 2488996172 )
    [Session started at 2010-03-02 13:03:31 +0530.] GNU gdb 6.3.50-20050815 (Apple version gdb-966) (Tue Mar 10 02:43:13 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 1717. kill

    Hello Thomas,
    I am sorry but I haven't check this forum in the last weeks because of lack of time. Thanks for your hint regarding a potential solution. Taking a look a the note I have some problem in "using" it.
    This note contains a number of potential solutions regarding our problem.
    Solution 1.) one could use the modification as described. Surprising to read that SAP is saying: do a modification to solve the problem. => this is only possible "manually"  I am not sure If I will follow this approach
    Solution 2.) Change the URL: This solution scenario I do not understand. The solution path is "very" short and not very instructive. This is the story:
    You can do this by adding "_OLD" to the name of the application of the URL created for the configuration: Use "CONFIGURE_APPLICATION_OLD" instead of "CONFIGURE_APPLICATION"
    and "CONFIGURE_COMPONENT_OLD" instead of "CONFIGURE_COMPONENT". If you want to use this function as your standard, you have to change the original application. To do this, set the parameter "OLD_TR" to "X".
    This solution path is "to short". I do not get the "message" what to do.
    Furthermore: Does that mean you have to use this peculiar solution any time durnig software development of webdynpro components using configurations? In my opinion yes. This is therefore only a "workaround solution" and nothing else.
    And there can I find this parameter "old_tr" they are talking about?
    Sap note 1060287 is the "same" kind (Symptom of this note:
    If you use the configuration editor, there may be errors during transport handling or
    DYNPRO_SEND_IN_BACKGROUND crashes.).
    Here they are saying:
    "Solution
    A final solution will be provided for Release 7.0 BASIS Support Package 13."
    So in SP13 there seems to be a solution (I haven't found up to now the corresponding note). But does that now mean I must implement the complete support package?
    So I am sorry: No progress on my side up to now. May be you have had some success?
    With best regards
    Christoph

  • When trying to upload a PDF to an interactive site I get the announcement:"The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach." How do I embed this, or in fact any other font ?

    When trying to upload a PDF to an interactive site I get the announcement: "The attached PDF file references a non-embedded font Tahoma. Please remove file, embed the font and reattach."
    I could not get rid of the Tahoma font in the WORD file.
    How do I embed this, or in fact any other font ?

    Thank you very much !
    Indeed, I was unaware of the enormous number of options that can be selected when converting a WORD file to PDF.
    I went thru the settings and found the right one for embedding the fonts.
    Thanks again !
    Oren

  • Opening an excel file from a button. square brackets in filename

    Internet explorer 6. Apex 3.1
    When I open an excel file (via a button) , it has the filename as follows:
    production_report[1].csv
    The prompt to save or open has the name as production_report.csv
    This prevents people saving the opened file as square brackets are not allowed in the file name.
    Is this an apex issue (ie a problem with the way I specify the filename) or a browser issue, and is there a solution?
    I am passing the filename in to my excel download page using the items/values settings.
    eg
    ITEM P12_FILENAME
    ITEM VALUE production_report.csv

    Yes, It works on firefox. It is only an issue with Internet Explorer.
    However our web based application has to use IE and therefore when it calls apex it is in an IE browser.
    I am really just producing a csv file, and opening it in excel. If this was fixed (or customisable in some way in IE that would help)

  • Project File File References

    Does JDeveloper 9.0.4 use absolute or relative file references in its project (.jpr) files, or is it a mixture of the two? I've heard conflicting stories but have personally only ever seen relative references.

    Yes, I've tried this and have gotten a clean compile.  However, the .dll is associated with third party software intended to add controls to a form.  The form does not display in Designer though (extensive stack trace errors) which made me wonder
    whether there is a downside to this approach.

  • Export a pdf to a swf file with navigation buttons???

    I have CS4 and I've tried to export a couple indesign files using the swf export feature, but it the navigation of the file is very weak and not very intuitive, and when you zoom in to any of the text the text goes fuzzy.
    I would like to just convert a PDF to SWF file with navigation buttons, page controls, zoom in/out, single or two page view options, so that my end user can view it with the free flash player, but I don't have time to build the file in Flash and I don't want to use an online service that comes with a per month or per publication fee.
    Any suggestions??

    I've looked at that, but most of the pdf's that I need to convert are more than 10 pages.  I want a program I can download, install and use without a per use cost, or per publication cost.
    I'm looking more for a plug-in for either Acrobat, or Indesign or stand alone program that would convert them without adding copyrights, or ads to the file.

  • ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."

    Hi all,
    After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
    ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
    The file has been verified and only has one root file reference in the container.xml file.
    Has anyone been able to find a solution to this problem?
    Thanks!

    Hello Forum Users…
    For those of you who have run into the upload roadblock, getting an error message similar to this:
    Package Summary:
    1 package(s) were not uploaded because they had problems:
              /Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
                        Apple's web service operation was not successful
                        Unable to authenticate the package: 9780615600918.itmsp
                        ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
    Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
    I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
    After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
    I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
    Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
    And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
    See Screenshots from InDesign:
      Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
    Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them.  In other words I clicked on EVERY text holder and every text block in the entire document.
    Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive,  iTUNES and iPAD.
    The result?  A "text-book" upload with no snags!  As my Son would say… "Victory!"
    So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs.  Then... make sure there are no overset text boxes, which you must do manually.
    Enjoy & Godspeed!
    Steve
    Stephen Melillo, Composer
    STORMWORKS®
    209 Spinnaker Run
    Smithfield, VA 23430-5623
    USA
    v/f 757-356-1928
    stormworld.com
    “History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
    "This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
    “If you have a chance to help someone, and you don’t, you are wasting your time on this earth.”  Roberto Clemente

  • Where is the "File" "transfer purchases" button?

    Where is the File>Transfer purchases button in itunes? Can't find it anywhere!

    You should have a File drop-down menu at the top of your computer's iTunes - if you are using a PC with iTunes 11 on it then try pressing Alt-F and the File menu should appear (on iTunes 11 it's File > Devices > Transfer Purchases)

Maybe you are looking for