File Repository Server error : Failed to determine whether there is enough disk space

Post Author: charlieh
CA Forum: Administration
I'm having this issue when attempting to upload documents inside Infoview. I've read the knowledge base article about adjusting the permissions for the Network Service account on the "c:\windows\temp" folder, and have taken that step but am still getting this error.
I can see the documents I tried to upload in the temp folder, so the transfer is successful, but I get the error, and the file does not show up in Infoview.
Any ideas?
Thanks
EDIT for more info:
I've gotten this to work by adding the Internet User (IUSR_) account to the c:\windows\temp folder. Why would this not work with the Network Service account added?

Post Author: elodie
CA Forum: Administration
Hi,
I'm having exactly the same issue.
Did you find a solution?
Thank you
Élodie

Similar Messages

  • File Repository Server error : Failed to determine whether there is enough

    Hi, We have setup a new server and while loading file we are getting following error message.
    File Repository Server error : Failed to determine whether there is enough disk space. We are on BOXI R2 SP3 on windows server 2003 with WAS on IIS 6.0.
    From CMC the error message is:
    There was an error while retrieving data from the server: Unable to open file C:\WINDOWS\TEMP\tmp875.txt.
    I ran Input FRS with a particular port and was able to ping FRS on that port. So port is opened.
    Does anyone know reason for this?
    Thanks,
    Kalpesh

    Can you elaborate exactly what you had to resolve this issue.
    Thanks, Mani

  • File repository server error: failed to put the file to file server

    Hi,
    Am trying to export relational and OLAP universe to repository and getting an error.
    Am using Universe Design Tool and product version is  BI 4.0 SP 5
    When I create a universe and export it for the first time it get exported successfully.
    However I tried to export same universe after making few changes, getting below error
    File Repository Server error: Failed to put the file to fileserver: frs://<FRS Location>/Universe_Name.unv already exists
    Is anybody faced such issue?
    I suspect it is a configuration issue/product bug.
    Your thoughts are highly appreciated.
    Regards,
    Vinesh

    Hello Vinesh,
    There is a workaround mentioned in the following KBA:
    1309859 - Error: WIS 00501 Universe not found when viewing Documents
    Please have a look.
    Thanks and regards,
    Madhumitha

  • "File Repository Server error" when trying to commit a new CrystalEnterprise.Program instance to the InfoStore

    I've run into an issue where saving a new CrystalEnterprise.Program instance is throwing an ambiguous exception with no other information than a generic HRESULT code and the even less useful error message "File Repository Server error". I've debugged the code using the COMException managed debugging assistant and Reflector to get to the callsite of the COM object, but there is nothing there to indicate what the actual File Repository error is attributed to. Logging for the InputFileRepository service in the CMS was been set to HIGH, but nothing shows there as a result of my code executing.
    The call to myInfoStore.Commit(...) is where the COMException is thrown.
        protected void CreateProgramObject(InfoStore infoStore)
            using(PluginManager pluginManager = infoStore.PluginManager)
                using(InfoObjects newCollection = infoStore.NewInfoObjectCollection())
                    using(PluginInfo programPlugin = pluginManager.GetPluginInfo("CrystalEnterprise.Program"))
                        using(Program tempProg = (Program)newCollection.Add(programPlugin))
                            const string USER_FOLDER_QUERY =
                                "Select SI_ID From CI_INFOOBJECTS Where SI_NAME = '[email protected]'";
                            using(InfoObjects folders = infoStore.Query(USER_FOLDER_QUERY))
                                if(folders.Count < 1)
                                    Response.Write("No user folder was found!");
                                    return;
                                using(InfoObject userReportFolder = folders[1])
                                    tempProg.Title = "Scheduled File";
                                    tempProg.Description = "My new program";
                                    tempProg.ParentID = userReportFolder.ID;
                                    tempProg.ProgramType = CeProgramType.ceScript;
                                    tempProg.Files.Add(@"E:\sample.bat");
                                    try
                                        infoStore.Commit(newCollection);
                                    catch(SystemException snx)
                                       Trace.Write(snx.ToString());
    Has anyone run into this issue and found a resolution?

    Thank you for the reply. I changed the file path on the BOE Server to match the path I'm using in the Files.Add(...) call. At least now I get a different error message, but it's still not enough to resolve the issue. The message is "File Repository Server error : File system operation for D:\Scripts\test.bat on File Repository Server failed.  If the problem persists, please contact your system administrator for event log information." I verified the service account the SIA service runs under can access that path, but still no luck.
    Using a UNC path resulted in the original "File Repository Server error" message in the Exception.

  • Getting BO 4.1 File Repository Server Error

    I am trying to save a 2008 report directly from Crystal Reports 2008 to a BO 4.1 repository and I am getting the following error
    <Caution Triangle Image> File Repository Server Error:
    I am able to upload the 2008 Crystal Report using the Add / Local Document directly to the BO 4.1 server but it only allows me to make a copy not overwrite.
    Does anyone know what I need to do, if anything to get it so I can save the report directly form Crystal Reports
    thanks

    Hi Alan,
    CR 2008 is supposed to work with BO XI 3.1. For BI 4.1 you should use CR 2013.
    -Abhilash

  • Input File repository server Error: The requested directory does not exist.

    Hi,
    Getting following error "The requested directory does not exist." for Input and Out put file repository server.
    The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
    The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
    Thanks,
    Manpreet

    @Siva,
    I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
    this was working prior to the Windows AD setup tried by me.

  • Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

    I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
    Thanks!

    I think I narrowed this down to having a network volume mounted with a share name of "Users".  The strange thing is even you if unmount the volume you will still have problems.  However, if you avoid mounting the volume entirely (from boot) it will be OK.
    The solution, it appears, is to rename the sharepoint to something other than "Users".  This worked for us.  I'm not sure if it matters whether the server is Windows or Mac OS.  In our case the sharepoint was an AFP volume on Mac OS.
    We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/.....  which made no sense at all.  However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
    So, another possible solution could be to grant file creation rights on the network volume "Users".  Another not-so-great idea.
    Hope that helps someone else!

  • Error msg when I compact: The folder 'Inbox' could not be compacted because writing to folder failed. Verify you have enough disk space, and have write privileg

    I recently had my computer serviced. I re-downloaded Thunderbird (getting a newer version), and retrieved my saved email. Now, Thunderbird keeps asking me to compact, but when I do, I get this error message:
    The folder 'Inbox' could not be compacted because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.
    Obviously, since I'm getting mail all the time, I have write privileges, and disk space. The question is whether there's a setting I need to specify, or whether Thunderbird is writing to a special partition that may have gotten write-protected when my computer was in the hospital - or whether this is related to a known bug.
    All help appreciated.

    The only know bug I can see is probably your anti virus is trying to scan the file when the new inbox is created leaving Thunderbird to think the file was not created.
    As an experimental / diagnostic process. Restart the machine in safe mode with networking using Microsoft instructions for [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7] then try the compact. If it works I was most likely right. If it does not, another idea must surface.

  • Linux Mint 17, migrated from Win7: Verify that you have enough disk space, and that you have write privileges to the file system, then try again.

    I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.

    I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
    The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage.

  • Error- Says I don't have enough disk space on external but I do??

    Hello all,
    Anyone know why I'm getting an error message saying I don't have enough disk space on an external drive when  there is over 400 gigs of space available?
    I am copying video files over to the drive  from another external drive and the files total about 30 gigs...
    I've seen other people have this prob but can't remember the fix.
    I have only 70 gigs available on my computer HD but don't see how that is  a factor.
    Thanks,
    Al

    That isn't the problem. When I start the download of Mavericks I have more than enough space on the disk drive. However, once it has downloaded and it is attempting to install this error occurs:
    Any ideas where I could re-download FindReaperFiles? From what I can see it's an Apple file but I can't find a download on their site at all.
    Thanks!

  • An Error has occurred: File Repository server input is down

    Hello Team,
    I am getting the following error message "An Error has occurred: File Repository server input is down" when try to upload exel or any other document in repository using . NET Infoview. Even with the Admin account.
    and 
    If i try the same steps from Java Infoview i am able to upload the excel.
    I guess some issue with IIS .
    Env Dtls:
    BO XI 3.1 SP3
    IIS 7
    Windows server 2008.
    Waiting for your valuable suggestions.
    Regards,
    Sonu Pandita

    Hi Team,
    I resolved this issue by giving one user a permission on temp folder.
    Regards,
    Sonu Pandita

  • Error 1923. Service 'Input File Repository Server' (BOBJInputFileServer) co

    I get the following error:
    Error 1923. Service 'Input File Repository Server' (BOBJInputFileServer) could not be installed.  Verify that you have sufficient privileges to install system services.
    I am trying to perform the install as an admin. I previously had the server installed but had to uninstall and now I cannot re-install. how would I do a complete uninstall of all registry components, etc. if necessary?

    Ok. Please open the services browser (Start->Programs->Control Panel->Administrative Tools->Services) and check if there are any BOBJ services still listed (like the Input File Repository Server).
    If you find any services still listed, please use instsrv.exe to remove them (even if the services are stopped and/or deactivated). Try to install again after you have removed all BOBJ related services.
    Regards,
    Stratos

  • Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

    Since I updated my Creative Cloud desktop App to its last version, my files are no longer synchronized. I received the "fail to synch files" and "server error" messages.

    Hi, Jeff.
    I'm not on a network and I didn't change anything on my secutiy setups, so I got in touch to the customer support. They checked my computer and found nothing wrong, so they uploded some log files to analyse the case. I'm waiting for a answer.
    Thanks for the tips.

  • Error: File Not Found on File Repository Server

    Post Author: Ashish.Phanse
    CA Forum: Exporting
    Hi
    We have clustered 2 servers and all the services of both the servers have CMS Name as "@<Cluster_Name>"
    But when we run any crystal report through the thin client(portal) or through crystal itself, it is showing the errror ---
    "xxxxxxxx.rpt not found on File Repository Server". If I check the path for report in CMC and if I check physical location, the file is present.
    This is happening only with Crystal reports and not with DESKI or WEBI reports.
    Please help...
    Thanks
    Ashish

    Post Author: eng_y_y
    CA Forum: Exporting
    Hi Ashish,
    Did you uninstall the Business Objectes and reinstall it again?

  • Error in Configuring the File Repository Server (FRS)

    Hi All.
    We are using  sap bo 3.1 sp7
    Huge space is  occupied by  File store    folder .
    So we are planning to move to share drive  entire folder
    as per few documents in  Scn.sap .I followed the steps  and made changes in  cmc---core services--input and output file repository for successfully..
    Note : I Restart each of the modified servers  and Enable the servers and i restarted SIA
    but still iam facing
    Consider it as a high priory issue
    Thanks,
    Raghunath

    Hi Raghu Go through below link it maybe helpful. http://wiki.scn.sap.com/wiki/display/BOBJ/File+Repository+Server http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=322437724 http://blogs.hexaware.com/business-objects-boogle/business-objects-file-repository-servers/

Maybe you are looking for

  • Automatic logout

    I am looking for code which will automatically logout user whenever he refresh page or click on back button. I am using JSp and Servlets

  • NoSquint properly resized web pages, but the upper taskbars are still too large--for instance, I can only the beginning of the URL. How to fix?

    After the latest Firefox version magnified everything, I used the NoSquint add-on (at 60%), which now makes web pages look as they did before. However, although the top two bars at the top of the screen are of normal size, the lower ones are still to

  • Printing track listing library

    Hi! I would like to know if it's possible in any way to extract the info from the library into a printable format? Or into an excel, word or other file? I would like have a printed list of one of my playlists for instance.... I already searched the n

  • Difficulty in developing a Browser? 10 Dukes

    hi guys, I am developing a web browser in java. I am able to display simple HTML page but when it comes to Applet and JavaScript it is not working. I am using JEditorPane for browser window for displaying pages. The browser is unable to display Apple

  • QT7 Pro will not complete Export Apple TV

    I have started to use QT7 Pro after a long while. I recently downloaded the QT7.6.6 upgrade. I can open and play .mp4 files on QT7 Pro, however I want to export the files to Apple TV. This appears to be working but the progress bar in the Export Disp